Problem with substring in xsl file?
Hallo,
i have a xsl file, when using
<xsl:value-of select="StsEdat"/> i've got 2007-05-21, that's o.k.
when using <xsl:value-of select="substring(StsEdat,9,2)"/> the answer is blank.
also 0,5 or so on. substring at this position delivers blank. why?
what can it be? i'am helpless.
any help is appreciated.
Hi,
I used <xsl:value-of select="substring(StartDate,9,2)"/> the answer was 21 and to 0,5 the answer was 2007. It seems that's ok!
Try to do it and see if you have problem with substring.
<xsl:variable name="StsEdat">2007-05-21</xsl:variable>
<xsl:value-of select="substring($StsEdat,9,2)"/>
or this weird way, :)
<xsl:variable name="StsEdat">2007-05-21</xsl:variable>
<xsl:value-of select='substring-after(substring-after($StsEdat, "-"), "-")' />
Regards,
Cleiton
Similar Messages
-
Problem with Preview and PSD files - random gray square
Hi guys, hope you can help...
I've got a problem with Preview and PSD files.
If I open in Preview both an original jpg straight from my reflex and the photoshop version of the same picture, the psd file presents a gray square (of what it seems unrendered image) in a random area of the photo (sometimes in the center.). The square is quite big...
If I zoom in or zoom out it disappears...if I scroll to another photo and then back to the psd, the square it's there again...sometimes in a different position.
I've tried the same psd on my older iMac with leopard...and got no problem at all.
I suspect it got something to do with my Ati...
(this is the second iMac 27...the first went back for gray banding on the lcd screen and flickering and yellow tinge........)
Thanks for your help.
DAve.maybe I'm onto something...
I've just found out that opening Preview in 32bit mode (instead of default 64bit) works flawlessly with any psd files. If I switch back to 64bit mode, Preview is much faster but the gray square comes back...
It seems like the i7 is much faster than the Ati....
Any more realistic ideas? -
I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?
Is the menu bar missing (the one containing File, View, Edit etc)? If it is, the following link shows how to restore it - https://support.mozilla.com/kb/Menu+bar+is+missing
-
I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...what should I do?
Hi Arika,
The drivers that you need to install to make your executable work depends on what your executable is doing. To get started, you need to have the LabVIEW Run-Time Engine installed on your target machine (the Win2000 machine you are planning to use) in order to run your executable. Next, you need to determine what drivers your executable uses, if any. For example, if you are using GPIB instrument control, you will need to install the NI-488 drivers on your target machine. If you are performing data acquisition, you will need to install NI-DAQ drivers. If you are doing image acquistion, you will need to install NI-IMAQ drivers.
All these drivers are available for downloading on ni.com. To get the drivers, go to ht
tp://www.ni.com/support , click on the link that takes you to Drivers and Updates (under Option 3), and click on the links to get to the driver(s) you need. For example, if you need the LabVIEW 5.1.1 Run-Time engine, click on the All Drivers and Updates by Application link on the main page (http://www.ni.com/softlib.nsf/). Then click on the LabVIEW link, Windows 2000, Run Time Engine, and then you will see the link to get to the page to download the LabVIEW 5.1.1 Run-Time Engine.
I hope this information helps.
Best Regards,
Wilbur Shen
National Instruments -
Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.
More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages AdbeRdrSecUpd11008.msp -
Problem with Append mode in File Receiver
Hello,
I am facing some problem with Append Mode in File Receiver.
In channel config, i have given :
Construction Mode : Append
File Type : Text
Message Protocol : File Content Conversion
The size of the file which i am trying to send is about 9.5MB.
I got this error,
"Recovering from loss of connection to database; message
loaded into queue by recover job: System Job (Failover Recovery)".
So, it would seem that there was a loss of connnection to the database
while the file was being written.
Note - XI successfully recovered from the connection loss and
successfully wrote the file, however since the communication channel
was set to append, it appended to the partial file that was written
before the database connection loss. This is not correct. The file
should have been overwritten after the recovery even though the communication
channel was configured to append.
Can anyone help me on this regard.
Thanks,
Soorya.Hi Venkat,
I would suggest u to split the file in to chunks if u face any problem in processing at a time in append mode and also
Memory Requirements are must 4 processing huge files:
Q: Which memory requirements does the File Adapter have? Is there a restriction on the maximum file size it can process?
A: The maximum file size that can be processed by the File Adapter depends on a number of factors:
o The most important one is the size of the Java heap, which is shared among all messages processed at a certain point in time. In order to be able to process larger messages without an out of memory error (OOM), it is recommended to increase the size of the available Java heap and/or to reduce the concurrency in the system so that fewer messages are processed in parallel.
o Another factor negatively influencing the maximum message size in releases up to and including XI 3.0 SP 13 is an enabled charcter set (encoding) conversion if the message type is set to "Text".
o Using the transport protocol "File Transfer Protocol (FTP)" also uses more memory for processing than the transport protocol "File System (NFS)" (up to and including XI 3.0 SP 13).
o If the Message Protocol "File Content Conversion" is used in a File Sender channel, consider that not only the size of the input file affects the File Adapter's memory usage, but even more the size of the XML resulting from the conversion, which is usually a few factors larger than the original plain text file.
To reduce the memory consumption in this scenario, consider configuring the setting "Maximum Recordsets per Message" for the sender channel. This will cause the input file to be split into multiple smaller mesages.
Plz do refer the following links:
U may plan the availability of ur communication channel using "Planning Availability Times" feature
http://help.sap.com/saphelp_nw04/helpdata/en/45/06bd029da31122e10000000a11466f/frameset.htm
/people/sravya.talanki2/blog/2005/11/29/night-mare-processing-huge-files-in-sap-xi
hi check the below links for reference
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10748ef7-b2f0-2910-7cb8-c81e7f284af5
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7086f109-aaa7-2a10-0cb5-f69bd2affd2b
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cc1ec146-0a01-0010-90a9-b1df1d2f346f
Regards,
Vinod. -
Problem with RTPExport output video files
Hi, I have a problem with RTPExport output video files. One side streams H263/RTP(AVTransmit2.java) and other write this steam to a file by RTPExport.java. When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Pls how can I achieve output file that will have the same fps like original one? How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Its there a way to modifi rtpexport or avreceiver to do this? Thanks a lot!
Trubka wrote:
When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Okay, first off, the second file is smaller on purpose. RTP intentionally drops packets that are old/out of order in order to make sure real-time video stays as close to real time as it can. This is by design, so there's really nothing that can be done about it.
How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Technically speaking, what you're getting in the RTPExport is exactly what you got on the receiving end. Any frames that are dropped during transmission will not be seen by the receiver, nor saved by the receiver.
Pls how can I achieve output file that will have the same fps like original one? I'm not 100% sure that you can, but, you can give the following idea a try. I make no guarentees that it'll work, but it should work for you...
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/RTPConnector.html]
That example is an example of a "custom transport layer" for RTP connections. Essentially, it's some code that's handed the RTP packets on the transmission end, and it's expected to deliver those RTP packets on the other end. And it doesn't care about how they get from A to B, only that they do.
If you were to replace the UDP socket in that example with a TCP socket, you would be guarenteed not to drop packets due to network reasons. Every RTP packet you were handed by the transmitter, you would then hand to the receiver. There is no guarentee that none of the packets would be cast away as "old" by the RTP protocol itself, but there's also no guarentee any of them would be. It's a crap-shoot at best, but it's certainly worth a try. -
A problem with importing layered PSD file into Flash
Hi.
There's a problem with importing layered PSD file into Flash.
If I import a layered PSD file, some part the color of the lower layer is shown at the edge of objects or shadows. Instead, if I crop each layers first and import them, there's no problem.
If the higher layer has brush or transparent effects, it becomes worse.
Any help with this problem?
Thanks.How was the original art created? Was the original RGB or CMYK? What is the resolution of the Photoshop file? Flash only works well with RGB and 72 pixel per inch resolution. If your original art is not set this way, then Flash will attempt to convert it as it imports it. Flash uses the sRGB color space. You'll get the best color translation if your Photoshop file is using this color preference.
-
Problem with Snow Leopard and file sharing
I mostly work at home where I have an 18 months-old intel iMac 24'' running Leopard and an older iMac G5 20'' (PowerPC) running Tiger. Besides, I have a three months-old MacBook Pro 17" in which I recently upgraded the system to Snow Leopard.
Before this upgrade I never had a problem with the sharing of files between the three computers (I have them connected via Ethernet and a 5-port D-Link router wich provides flawless internet connection to the three computers). However, after the upgrade it has become impossible to connect the MacBook to the iMac G5 or vice versa via afp. Besides, getting the MacBook to connect to the (Leopard) iMac 24'' is frustratingly slow in either direction.
A related problem is the fact that after the upgrade the portable is no longer capable of seeing directly my ethernet-connected laser printer (to one of the ports of the D-Link router) although... surprise! it does see it as a shared printer in the iMac G5 and this way it prints alright.
Any ideas or suggestions to explore the cause of or solve this problem are warmly welcome.
Emilio FaroSame problem here, did you find a solution?
-
Problems with mp4 (h.264) files, colour desaturated.
Hey guys. I've been having problems with mp4 h.264 files (not quicktime h.264). When playback on windows media player and windows classic media player it looks terrible. the saturation are weird (espesially on colours like yellow and red) and there seems to be this weird blur on the image. For so long I thought there was problem with the export from Premiere Pro, today however when playback on Quicktime player or VLC player it matches the orginal. I exported the file through premiere pro. I don't know what the problem is, maybe it's just the playback on windows media player and window classic media player.
Playback on quicktime
Playback on media player
Can someone tell me what's going on?When playback on windows media player and windows classic media player it looks terrible. the saturation are weird (espesially on colours like yellow and red) and there seems to be this weird blur on the image... when playback on Quicktime player or VLC player it matches the orginal...
On the contrary, with more than high probability playback in QuirkTime shows you wrong colours because of its crooked colour management.
How do you judge on colour matching between your source file and what you see in media players?
What is your spec and GPU in particular? Do you use any sort of colour management in its settings? -
Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no diference
Download and install the free VLC for Mac - that should work:
http://www.videolan.org/vlc/download-macosx.html -
Hej!
I've switched from Google to Firefox because I was so tired of Google crashed all the time. Now I have the same problem with Firefox, Bank id, file downloading, accessing Web pages, none of it works. What is the error?
Ronnie.When Firefox crashes, it usually records information about what was happening at that moment and displays the Mozilla Crash Reporter. Are you seeing that, or is Firefox just freezing and you're killing it?
Assuming you have crashes, you can submit that data to Mozilla and share it with forum volunteers to see whether it points to the solution. Please check the support article "[[Firefox Crashes]]" (especially the last section) for steps to get those crash report IDs, and then post some of the recent ones here.
If that's not possible, have you tried Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference? -
Problem with Java and Zip Files
Hello there everyone. I have a problem with trying to zip up directories with empty folders in them. They zip fine with my code, but according to winzip, the number of files in the archive is incorrect. It's supposed to have a total of 288 files in it, but when it's zipped up, it only says 284. I mention specifically the "empty directories" note because the zipping works fine without empty folders.
Below is the code for the zip method:
public static void zip(File[] list, File zipfile, File zipRoot)
throws IOException {
if (!zipfile.exists()) {
zipfile.createNewFile();
else if (!zipfile.isFile()) {
throw new IOException("The zip file, " + zipfile.getAbsolutePath()
+ " is not a file.");
if (list.length == 0) {
LOG.error("The list of files to zip up is empty.");
for (int i = 0; i < list.length; i++) {
if (!list.exists()) {
throw new IOException("The file or directory, " + list[i].getAbsolutePath()
+ " does not exist.");
FileOutputStream fos = new FileOutputStream(zipfile);
ZipOutputStream zos = new ZipOutputStream(fos);
for (int i = 0; i < list.length; i++) {
if (LOG.isDebugEnabled())
LOG.debug(i + ": " + list[i].getName());
String entryName = getRelativeName(list[i], zipRoot);
if (list[i].isDirectory()){
if (list[i].listFiles().length == 0){
ZipEntry entry = new ZipEntry(entryName + "/");
zos.putNextEntry(entry);
else {
ZipEntry ze = new ZipEntry(entryName);
zos.putNextEntry(ze);
byte[] buffer = new byte[8096];
FileInputStream fis = new FileInputStream(list[i]);
int read = 0;
read = fis.read(buffer);
if (LOG.isDebugEnabled())
LOG.debug("\tFound " + read + " bytes.");
if (read == -1){
//empty file, but add it for preservation.
//zos.write(buffer,0,0);
while (read != -1) {
zos.write(buffer, 0, read);
read = fis.read(buffer);
fis.close();
zos.closeEntry();
zos.close();
The files look like they're there, but I need the system to be able to determine the number correctly.
Here's the interesting thing: It zips the files, and then when I use the size() method for zip files in java, it says 284 files. But when I unzip, it says 288 again. It's like there's files missing when compressed, but when decompressed, they return. Note that the files are actually there. If I open the archive in a third party app such as Winzip AND Winrar AND IZarc, they all show 288 files. Any idea what would make the number of files appear incorrectly in a zip file when zipped by java with the code above? Thanks in advance.
- ChrisI figured out the problem. When zipping files in windows using winzip, it doesn't explicitly count folders as a "file/folder" as a file in itself. It will create the folders for files to go in, but the folder itself will not be 'counted' when you query the info of the file itself. You have more control of the zip file in java, and can count the folder as a file or not.
-
Problem with Creation of TemSe file...
HI Experts...
Here im facing the problem with creation of # 3 rd Quarters
Temse file.when ever i use the tcode pc00_m40_f24 and entering the details of quater 3 ...here im showing up the ABAP Runtime error."""Overflow for arthimitic operation Type P in program HINCF240"".
What could be done to overcome the problem.Please advice.
Regards,
V Sai.Hi experts/Sriram...
Thanks for the reply.
The -
>showing the line....
QS80_TAB-DEDMT=QS80_TAB-DEDMT+S80-DEDMT
Where should we change to get rid of this runtime error.
Here in my quality everthing is fine and we have uploaded patches in quality upto recent one sp80.But in prod. the patchlevel is sp71.Will it be the reason.
Please advice me on this as i have to complete the issue of F16.
Thanks and Regards,
V Sai. -
Problem with creating a new file in the Filter
hi,
i have the following problem.
1) For all requests ending with *.xml (for example requests such as http://www.asdf.com/feeds/myfile.xml ) i have mapped it to a filter
2 ) In the filter i did the following...................
//getting the file name from the url
//create the file if it does not exists..................
chain(request,reponse);
//done
problem is
3) a) For files which iam not creating in filter (i.e files which are already there) the response is proper it is returning a xml file
b) But for files which are not there already , which we are creating in the filter dynamically it is showing a 404 (i.e file not found message)
But if i refresh again in the browser it is getting a valid XML file.......................................
I could not able to figure it out why it is returning 404 error in cases where the file is being created dynamically.................................
Can any one guide me resolving this problem?Hi pawan
Try this badi : MB_MIGO_BADI -
(BAdI in MIGO for External Detail Subscreens) as the name suggest ,
If you want to add a screen in header level use : Method : PBO_header an code as :
e_cprog = 'ZMMPRM0001'. """ Your screen created
e_dynnr = '1000'. "Your screen No
e_heading = 'TEXT ID '(004). """" Name of the screen to be created .
ELSE .
e_cprog = 'ZMMPRM0001'.
e_dynnr = '1000'. "External fields: Display
e_heading = 'TEXT ID '."(004).
or if at item level
u can use methid : PBO_DETAIL
for item level screen creation . and code in the same maaner ..
You can explore the remaning methods as per your requirements .
Hope it helps ..!
Regrads
Swapnil P KAmble
Maybe you are looking for
-
hi
-
Hi, is there any chance to run a file , with the ending .bat. I was able to run run one with the ending .exe. Are there any limitations. Greetings tom
-
Hey people, I have a problem with my Muvo TX USB 2.0 : when i try to switch on my mp3, "File Error System" appears on the screen and the player switches off on its own. When I plug it in my laptop, i'm unable to access the hard dri've but I can see t
-
Colour Management Problem - Please Help!
I am using Photoshop CS3 I have edited a portrait image in Camera Raw. From Bridge I have used Tools -> Photoshop -> Web Photo Gallery I have taken one of the resulting JPEGS out and it displays absolutely fine in Microsoft applications, and skin ton
-
Hi all, I need to generate an Idoc with type COND_A01. Does anyone have some insight on how can I do this? Please note that I don't want to use WE19, because what I need to do is to get some "real" data from the system and check what values go into w