Problem with suitcase fusion 3 on mac osx10.5.8 ppc

Hi I have this problem, it appears everytime I put the suitcase on but I have this configured for the Adobe Illustrator app but instead it messes up all my fonts on the email and browser, help please.

I'd open Font Book, Validate all Fonts & check for duplicates.

Similar Messages

Font problems with Suitcase 10

Since I have installed Tiger, I have problems with Suitcase.
When I want to open a font, I have a message saying that the font is in conflict with a font of the System.
But I removed all the unnecessary fonts from my sytem allready. And I followed all the steps in the Suitcase extensis manual too.
What can i do to open all the fonts I need.
I am a graphic designer and it's a big probem for me
Heeellllp!
iMac G4 17" flatscreen Mac OS X (10.4.7)

if you are using classic for quark 4 still...
http://www.linotype.com/fontexplorerX
Linotype is good and free, but will not support classic.
"Classic mode is not and will never be supported by Linotype
FontExplorer™ X." it will not manage fonts for classic.
(http://www.linotype.com/fontexplorerX/FAQ?issue=57&category=8)
an upgrade for $50 to extensis suitcase fusion, does not support classic font management either.
some info to try to make suitcase work.
http://discussions.apple.com/thread.jspa?messageID=740351&#740351
both the preview pane, and font cache are solutions to try.

I am having a problem with Windows Fusion installed on a MacBook.

I am having a problem with Windows Fusion installed on a MacBook OS 10. When attempting to use a Browser, (either IE, or Chrome), under Windows Fusion, I cannot browse to ANY page except Gmail.com.
I checked all security settings, and found no problem. Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!
I am not sure if I have some virus on my Windows side, because Google and Safari both work perfectly on my Apple side, just not when running Windows Fusion.
Is there some setting I am missing, or do you think I have malware/virus issues?? My Internet connection is DEFINITELY working fine - I can send, receive, open, and close all my email on Gmail only, and can navigate freely on Gmail, but cannot get to any other site even hyperlinked to Gmail.
Any help would be greatly appreciated.
Thank you very much.

HartEJ wrote:
...Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!...
If you've already tried my previous suggestions, it may be that something has tampered with the DNS settings in your Windows VM, which might bypass the settings your Mac uses. Assuming you're using Windows 8, these instructions explain how to check and change the DNS settings. There's also a link in those instructions listing a variety of suggested DNS settings. If you do try changing the settings, record what the settings currently are in case you want to return to them.

CS4 with Suitcase Fusion

Considering purchasing CS4. Am using OSX 10.4.1 with Suitcase Fusion 12.1.6.
Any font issues with CS4 (especially InDesign & Illustrator).

The only issue I am aware of is how thoroughly crappy Suitcase has been for years. The new version of Fusion might be non-crappy, but I'd bet against that. My biggest issue with SF lately is constant conflict errors when I activate Helvetica Neue T1, since the dfont version is installed in the OS. I hope to convince the keepers of the purse to upgrade out fonts to OTF, which will probably solve the problem.
If you can, I suggest using Linotype Font Explorer. Its' free, much easier to use than Suitcase, has excellent preview features, and the auto-activation is tops.

HT200169 Having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Sug

Hello,having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Suggestions?

Thanks, Ian. Yeah, that's how I do it now...or with the controls in the left side pane. Still, I would have liked that quick on-the-spot edit capability...especially while sketching.
Ian Turner wrote:
Sorry Mark, you are out of luck as it does not do that - it works the same as L8. The way I would achieve that with more accuracy and control would be to route all the tracks you want to fade to a Bus then use volume automation on the bus. To do this you will need to add a standard audio track, then re-assign it using (Control Click on the track header) to the Bus track. You can then automate volume/plugins etc on the Bus track.
Ian

Hi Guys, I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader, What is the problem here so I can get Pictures onto my Computer. ,

Hi Guys,
I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
What is the problem here so I can get Pictures onto my Computer. ,

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

Problems with Photoshop cs4 for the Mac

I am having all kinds of problems with Photoshop CS4 for the Mac. When I boot the software it seems to work for a while then, I am unable to open upf a file in Photoshop. I drag a photoshop file over the application icon, the whole screen flickers and nothing happens. I am unable to quit Photoshop as the quit choice is grayed out and command-q will not make it quit. I have to force quit. I can repeat this pattern over and over. What is happening? How do I solve this problem?
--Kenoli

Thanks for the reply. I am using Photoshop 11.0.1. I am using the latest version of Snow Leopard. I have found both Photoshop and Dreamweaver to be pretty buggy for several versions now. My suspicions were that they were really engineered for Windows and never really fully implemented for the Mac. Dreamweaver crashes or hangs on me three or four times a day if I us it all day and does various annoying things like refusing to respond to the delete key after I have used it for a while. I have pretty much stopped using it to some degree for that reason and also because there is other software that does a lot of coding things I do much more directly and simply. Also Dreamweaver always seems to struggle to quit when I tell it to quit (that is, it takes a long time and gets hung up at places before it quits) and once it does quit, I always get a message saying that it has unexpectedly quit (even when I have told it to quit).
The problems with Photoshop (starting with just taking a long time to load) have escalated to the point I described today, which makes it almost unusable. I just reinstalled Snow Leopard to see if there was anything buggy in the system software. I will report if problems go away.
Regarding both the refusal to open image files and the grayed out quit command, made me think something like you, i.e. there was some dialogue box open somewhere. However, I couldn't find anything and I don't use two monitors.
So . . . Adobe just seems to be getting more expensive and more buggy.
Incidentally, why is it still running in Rosetta rather than natively? Adobe now has a real Intel processor to work with.
--Kenoli

I have a problem with the program Lightroom on Mac

Hello!
I have a problem with the program Lightroom on Mac
Today set a new Lightroom CC 2015 through Creative Cloud but it does not run , I do not know what is the reason
Please help resolve this issue as soon as possible , I can not continue its work
Thank you for attention

Hi Musik
Take a look at this link and see if it helps:
Lightroom doesn't launch or quits automatically after splash screen
Pattie

Fonts not available in IDCC2014, with Suitcase Fusion 5 or 6

I have opened and worked a InDesign CC2014 doc. Everything is fine. The next day I attempt to open the doc again with the same fonts installed and they come up missing. I try several Macs, (different OSs), different versions of Suitcase Fusion including the latest and I get the same issue. Cleared font cache, restarted, etc to no avail. Any ideas? This has happened over the years occasionally, and has seemed to happen recently on a few occasions.
Thanks

That's a large part of the problem. You have more than one font manager on your Mac. If you're not using Font Book, delete it. Then you need to reset its orphaned database so OS X stops trying to control which fonts are, or aren't active according to that data.
To remove Font Book from the hard drive, follow these steps:
1) Open Font Book, and then its preferences. Uncheck the box for "Alert me if system fonts change". Close the preferences and shut down Font Book. Put the Font Book application in the trash and delete it.
2) Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding it until OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally.
This will reset Font Book's database and clear the cache files in your user account. The main goal in this step is to remove the orphaned Font Book database from the hard drive. With the Font Book application no longer on the hard drive, a new one cannot be created. Which is what we want.
3) Close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
sudo atsutil databases -remove
This removes all font cache files. Both for the system and all user font cache files. After running the command, close Terminal and immediately restart your Mac.

Any problems with apple fusion drives?

I am in the process of ordering new iMacs with fusion drives. someone mentioned that could cause problems with Adobe Photoshop.

This might help, but that was 2012
Mac Fusion Drive: pro users beware | ZDNet
2014:
http://forums.macrumors.com/showthread.php?t=1711254
Gene

Problem with HP Printer Utility and Mac OSX 10.5.4

I have a problem with HP printer Utility. When a standard user adds a new paper profile HP Printer Utility asks to type an administrator's name and password to allow HP printer Utility to make changes. Is it possible to avoid this? Otherwise I have to give admin rights to every user because they have to be able to add new papers. HP printer Utility sharing and permisssions are set to read and write to everyone.
HP designjet Z3200
MacOSX 10.5.4 (Mac pro intel)
HP printer utility 3.6.0.

Just found an email HP Support sent to me back in January 2008, about this issue
"Hello Hunter,
Thank you for contacting HP Total Care.
There currently is not proper driver for 10.5, so it is surprising that the printer is printing correctly on your Mac from any application.
Your issue cannot be resolved until the 10.5 driver is developed and released.
To sign up for an update as soon as it is available ...click on the link below:
HP's subscriber's choice is a free service where you can select to receive timely email notifications ranging from software and driver updates to creative ways to do more with your HP products.
http://h71036.www7.hp.com/hho/html/3618-0-0-225-121.html
If you need further assistance, please reply to this message and we will be happy to assist you further.
You may receive an e-mail survey regarding your e-mail support experience. We would appreciate your feedback.
For information on keeping your HP and Compaq products up and running, please visit our Web site
at:
http://www.hp.com/go/totalcare
Sincerely,
Dave
HP Total Care"
I just sent them an email today on any updates regarding a release date on the Leopard driver for P1005, i'll post any info i receive.

Problems with the new Pages for Mac

I'm starting to see countless problems running the new Pages for Mac (5.0.1) and I can't find a way to resolve them.
1. when I'm typing and want to delete word(s), I'll use the alt+delete function for ease, however this starts deleting words after the cursor, merging words together and changing my sentece. It comes from when I'm deleting as the new pages is giving me the dropdown menu for the autocorrect word.
2. grammar check is off. Namely, it picks a random point in a word and moves on from there. EX: "because of the" will have "use of the" underlined in green and give me recommendations to change to "because of the" or "cause of the". Using those recommendations, I'll end up with something like: "becabecause of the"
3. the find and replace function jumps around in the paper, and sometimes doesn't even display the word currently selected (leaving the user to scroll around looking for what is selected)
4. Autocorrect has vanished for some reason: no autocapitalization, no turning fractions such as 1/2 into a tidy and neat fraction with small numbers for numerators/denominators, etc.
I'm still using it, and these are what I have found, so there may be more later as I continue to use it. If anyone has found ways around these bugs, please let me know.
Thanks!

Semnani wrote:
4. Autocorrect has vanished for some reason: no autocapitalization, no turning fractions such as 1/2 into a tidy and neat fraction with small numbers for numerators/denominators, etc.
Pages 5 now uses the system autocorrect, which does not have as many features as the one inside Pages 4. Some things you can add manually there. Others you have to ask Apple to add via
http://www.apple.com/feedback
Or continue to use Pages 4 instead.

Problem with vmware fusion 3.1.3 after upgrade to Lion

Greetings,
I have some problems with my vmware fusion 3.1.1 after my update to OS X v10.7.
i used a MacBook pro 17'' half a year old.
I used VMWare Fusion 3.1.3 and bootcamp to. I have make no backup bevore i upgrade.
The path of my virtual machine couldn't be found and so the virtual maschine didn't start after this upgrade.
I hope that i musn't reinstall my virtual Windows 7 machine.
I'am searching for a resulution and found this:
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=display KC&externalId=1003483
Cannot open the disk '/Users/<User Name>/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp/dev/disk0s3/Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on.
But i would save the virtual machine bevor i reinstall VMWare Fusion 3.1.3.
Have anyone a idea how i found my virtual machine.
Greetings from Germany
Kim

According to: http://roaringapps.com/app:61 Version 3.1.3 has issues with Lion. There is a 2011 beta that works better.

Problems with Mail after upgrading to MAC OS10 version 10.6.8

I upgraded to MAC OS10 version 10.6.8 about ten days ago, and have since had lots of problems with mail. Since I upgraded, I have downloaded several software updates, including one for improving the general softeware system of Leopard. Since this morning, I no longer have the Mail icon in the dock and when I try to open it in Applications a window comes up saying:
'You can't use this version of Mail with this version of Mac OS X. You have Mail version 4.5 (1084/1085). It can't be used on Mac OS X Version 10.6.8 (Build 10K549)
Can I download a version that I can use with this Mac, and can anybody give me the site where I can find this. I have tried without success

You should consider downloading the 10.6.8 combo updater and applying it again.
http://support.apple.com/kb/DL1399
Pondini has a great page about upgrading.
http://pondini.org/OSX/Combo.html

Problem with Windows media player on MAC

I got a new macbook and installed windows vista. When I wanted to play CDs on windows media player there comes a message"windows media player have aproblem..." and the window closes. I contacted the Microsoft support system and they said that the it is the problem with the mac that the Macbook is not really supporting some of the files and they told me to contact the Apple support and even then they could not solve the problem. I returned the first laptop and got a new Macbook again and even the second macbook has the same problem. Could anmy one tell me why this is happening? If your a Macbook user with windows, did you notice this kind of similar problem? Please do let me know. Thanking you.

If you have the current version of Microsoft Windows Media Player for Mac installed, there is little you can do. The WMPFM is not kept as current as the Windows version (IMO, I think MS hates Apple - and this is intentional).

Problem with suitcase fusion 3 on mac osx10.5.8 ppc

Similar Messages

Maybe you are looking for