Problem with support package import SAPKNA7018

Hi Experts,
I have installed CRM 7.0 support release 1. After that,I have successfully imported the following components SAPKA70107 (level 7), SAPKB70107 (level 7), SAPK-70107INPIBASIS (level 7), SAPKW70107 (level 7) and SAPK-70108INSAPBSFND (level 8). Also, SAP_AP: SAPKNA7016 & SAPKNA7017 have been imported successfully.
I facing the below issue while trying to import SAPKNA7018. (As it is CRM I am importing with CRM Support Package Manager wizard.)
Prerequiste     Log. AND      Prerequisite      Prereq typ       Package Description
SAPKW701??      1           SAPKNA7018       P                     Could not find an equivalent
But already SAP_BW patch is successfully upgraded to level 7 (SAPKW70107).
While checking PAT07 table it is showing dependancy as:
PATCH                CONJUNCT SEQUENCE REQ_TYPE REQUMENT                                 CONFLICT_R TRUTH FLAG DESCRIPT
SAPKNA7018           01       001      A        SAP_AP,700                                          T
SAPKNA7018           01       002      P        SAPKNA7017                                          T          SAP_AP,700,0017
SAPKNA7018           01       003      A        SAP_BW,700                                          T
SAPKNA7018           01       004      P        SAPKW70022                                          T          SAP_BW,700,0022
No idea, why dependency is on SAPKW70022 while it is already in SAPKW70107 level. For other landscapes we never faced this error while did the same patching. Could anyone give some clue on this?
Thanks & Regards,
Sujit.

Hi Experts,
Please share your thoughts. The issue is still persisting.
Any help is appreciated.
Thanks & Regards,
Sujit.

Similar Messages

Problem with Support Package SAP_BASIS (Error Stop) IMPORT_PROPER

Hi Everyone,
i want to apply Support Pack for SAP_BASIS. Now Its Level is 0009 (ECC 6.0).
i did import the SPs SAPKB70010 and SAPKB70011. We only want until Stack 11.
The test scenario was without an error. But during the Standard scenario there occurred a problem:
SPAM Status: Error Stop
Import Phase: IMPORT_PROPER
I guess there are different reasons:
1) We didn´t make a SPAM update before! it´s still version 7.00/0021.
2) I have no idea if the guy before me made a kernel update.
And now i wanted to update SPAM to version 27. but first i should "repair" this problem because the SAP_BASIS is still in the queue.
Is there a possibility to delete the queue, update SPAM and the Kernel and then try it again with this support package?
We cannot go further than Stack 11!
please help me!

Hi,
This is not because of SPAM version nor the upgrade of kernal.If that was a SPAM problem then it will
not allow you to define the queue.
There are some know problems with this basis patches please read the note .Just run the import again this error would not occur.
If this error occurs then post the import logs for further analysis.
Regards,
Vamshi.

Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

Hello chae84swangin,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

URGENT : EP 7.0 /ECC 5.0 - Problem with Business Package : ESS/MSS

Dear Portal Gurus,
We are facing a problem with business package for ESS/MSS
Our system Info is as under :
Portal:- NW 2004s
ERP2004: - (R3 ECC 5.0)
ESS:- BP for Employee Self-Service (mySAP ERP 2004) 60.2
MSS:- BP for Manager Self-Service (mySAP ERP 2004) 60.1.1
SAP XSS à (SAP ESS 100, SAP MSS 100 and SAP PCUI_GP 100 , all upto SP 12)
After the Business Packages were installed,found that some ess apps where not deployed...so manually deployed it.
The JCO connections are OK.
Do we need to set up the backend Homepage Framework for the same......even for preview.....was thinking not.
Also, here is the error and exception that we get when we preview any ESS iview.
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
You dont have the authorization to start service sap.com/pcui_gp~xssutils/XssMenuArea.
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: You dont have the authorization to start service sap.com/pcui_gp~xssutils/XssMenuArea.
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
at com.sap.pcuigp.xssfpm.wd.BackendConnections.initBackend(BackendConnections.java:234)
at com.sap.pcuigp.xssfpm.wd.BackendConnections.connectModel(BackendConnections.java:159)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.connectModel(InternalBackendConnections.java:183)
Thanks.
Message was edited by: Ashutosh Rana

I got the same problem :/
not the authorization, but the fields in working time is displaying wrong.. (too big)
Any solution to this?
Best Regards
Kristoffer Engh

I can't install wmpfirefoxplugin at Firefox 4, It show "The installer has encountered an unexpected error installing theis package. This may indicate a problem with this package. The error code is 2755.

The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2755.

Although you're getting a different error message, perhaps try the procedure from the following user tip:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

The installer has encountered an unexpected error installing this package.This may indicate a problem with this package. The error code is 2869

Hi,
I am getting error "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2869." while installing SAP B1DE.
Note:
Downloaded the B1DE from B1DE:SAP Business One Development Environment Tools
Using Window XP , .Net 2008, SAP B1 8.81 Version
Company Name, Contact Person, Namespace all were given while installing. All of its length is less than 8
Any help is appreciated.
Thanks in advance.
Parvatha Solai.N

Hi,
Try post a comment in B1DE 2.0.1 new version! blog.
Beni.

Error code 2318 (problem with installation package) HELP

Ok so I tried to download itunes earlier today, and it went fine until the very end, I got this message...
''The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2318''
So I went through and tried to repair the itunes to no avail. So I removed everything and ran the microsoft installer cleanup utility, then re-installed itunes and quicktime. Again everything went fine until the end, got the same ''2318'' error message. Itunes shows up on my desktop, as does quicktime. When I click itunes I get a pop up window telling me the application must close due to error, would I like to send an error report.
So I went back and uninstalled everything AGAIN, and now its downloading again. I'm getting kidn of peeved... can anyone help me?

ok I got it. Had to end up doing a small overhaul on the computer to remove the corrupted ''sample.mov'' file out of the quicktime folder, but its working now.

Problem with SUNWmconr Package

I'm having problems with installing the Sun Java Web Console. The pkgadd fails (see below error). It looks like the package is missing the SUNWmconr/reloc/lib/svc/method/svc-webconsole file. So I checked my Solaris_10-06.06 CD to verify that the package wasn't corrupt on my JumpStart server and the package on the CD is missing this file as well. I searched online for SUNWmconr errors related to svc-webconsole and didn't find much; most people remove this package for security reasons.
Is this a know problem or am I missing something obvious here?
Thanks,
Cody
System: Solaris 10-06.06 w/ latest patches
Installing Sun Java(TM) Web Console 3.0.2 (Root) as <SUNWmconr>
## Executing preinstall script.
## Installing part 1 of 1.
/lib/svc/method/svc-webconsole
pkgadd: ERROR: unable to open </mnt/js/10/files/java_es-5_identsuite/Solaris_sparc/Product/shared_components/Solaris_10/Packages/SUNWmconr/reloc/lib/svc/method/svc-webconsole> for reading: (2) No such file or directory
19 blocks
/lib/svc/method/svc-webconsole
pkgadd: ERROR: unable to open </mnt/js/10/files/java_es-5_identsuite/Solaris_sparc/Product/shared_components/Solaris_10/Packages/SUNWmconr/reloc/lib/svc/method/svc-webconsole> for reading: (2) No such file or directory
[ verifying class <none> ]
ERROR: attribute verification of </lib/svc/method/svc-webconsole> failed
pathname does not exist
[ verifying class <manifest> ]
[ verifying class <rbac> ]
## Executing postinstall script.
Installation of <SUNWmconr> partially failed.

This message often relates to a problem with Apple software update.
Go to Add remove programs and find Apple Software update. Try repairing it.
Select Change>>repair.
That probably will not work
Then try uninstalling any instance you find of Apple Software update. That probably will not work either.
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program.
http://support.microsoft.com/kb/290301/
To run the program – All Programs>>Windows Install Cleanup
Remove any instance you find of Apple software update with the cleanup utility.
Download a fresh copy of the iTunes installer and save it on your desktop.
http://www.apple.com/itunes/download/
Restart your computer and try installing iTunes.

How does one escalate problems with support

Hi
How does one escalate problems one experience with support?
The support desk has agreed three weeks ago that they will arrange for my Playbook to be collected - and I have follwed up a number of times - but still nothing. I am still sitting with a useless Playbook.
Thanx

I had the issue too, you have to agre to the email that was sent to get RMA done.
might need to call support once more and explain this part and agree to the email.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

System shutdown during support package import

We were importing a BASIS support package in our system. Then for other reasons the system shutdown in the IMPOR_PROPER phase so...the system now is corrupted.
We try to launch the import of support package again from SAP GUI but we can not, a dump is generated everytime.
Are there a posibility of launch the import from operating system to finalice the aplication of package?what are the commands to do that?
We try to avoid the recovery from backup
Regards

Hi,
I don't think it is possible other than backup restore.
But already you are at worst case..i will suggest you to check the data in PAT01 and PAT03 tables at database level.
And delete all the contents from those tables then retry to login.
*Open a support message
Regards,
Nick Loy

I get this error when I try to install iTunes 10.7: "The installer has encountered an unexpected error installing this package. This may indocate a problem with this package. The error code is 2203."

I am running Windows 7 64bit. I downloaded the latest version of iTunes and ran the installer. This message pops up, I click OK and the installation continues. Then, when I try to launch iTunes I get this: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5)". I have also received this error message even when the installation hasn't had any problems. I have uninstalled, reinstalled, restarted, repaired my .net framework, uninstalled all components following the steps in Article: HT1923 http://support.apple.com/kb/HT1923 all to no avail. It still won't run. It was working perfectly before I updated it to 10.7. After that it all went to crap. I even tried installing the previous version and still get this error message. Any suggestions?

Okay ... so it's not one of the cases of bodged up ACLs on the Apple folder in Common Files. (That's been underlying a few of the recalcitrant E7W5s.
Just in case, let's try the fixit from the following document:
Fix problems with programs that can't be installed or uninstalled

Problem with jpeg images imported from Illustrator

Hi, i am kind of new with Premire and video, though have experience in web design and coding, but i have noticed a weird problem with premiere pro cs 5.5 when i import jpeg pictures and put them as intro before the video that where done in adobe illustrator and have vectors and stuff, the quality of the image gets pretty bad and blurry...i searched through the internet looking for clues on what to do like changing to png, tiff formats but nothing has helped so far....any ideas on what to do. So when i import jpeg,png images from illustrator (that have vectors or illustrations) do i have to do something special with it, or import it in some special format??? i would appreciate the help.
This is how the image looks on youtube:
Anyway here is the video with its poor image quality. http://www.youtube.com/watch?v=o_oMNzXAZ8Y&feature=youtu.be
This is how it looks originally before putiing it, in premiere pro cs 5.5
Anyway here is the video with its poor image quality. http://www.youtube.com/watch?v=o_oMNzXAZ8Y&feature=youtu.be
THANX guys would appreciate the help!!!

hiya.
video likes 72 dpi ( though some will say it doesnt matter .. thats a long story ). basically video 'shows' 72 dpi ( basically what the monitor resolution is...typically 72 dpi ). As you know from print and dimensions, there is a relative sorta thing with byte count ( file size in bytes ), ppi ( I usually say dpi but in video its ppi ....same thing basically )..., and dimensions ( width x height ).
soooo , as you know in print and web stuff...there is a relationship between number of dots or pixels, dimensions in inches or pixels, and overall byte count of file size....
That said, in "print" it is usually best to go with 300dpi.. In video it is best to go with 72 ppi.....
Also, in print and going offest press.. its nice to go with cmyk ( for color separations ).. but in video and web its best to go with RGB.
The video stuff doesnt deal with vector stuff... it just sees and deals with bitmapped stuff...vector stuff is a mathematical sorta thing whereas video stuff is just plain old bitmaps ( like BMP, TIF, JPG, etc )...
Ideally your still images and graphics in a video editing program would be bitmapped rgb 72 ppi.. and match exactly the dimension of your video format ( eg. 1080p ). That said, it is normal to have LARGER images ( still images and graphics ) than your project dimensions if you PLAN ON SCALING AND MOTION )... like, your original graphic or pic can be larger than the project if you plan on scaling it down over time to make it look like you are zooming out in the video ....
To get the best results of a graphic or picture in a video is to have it exactly the project size ( eg. 1920x1080 px at 72 ppi for full HD ).
soooooo.... if you convert your vector to bitmap, save as psd or tif or something... at 72ppi , with the dimensions in inches or pixels that equals the video ( 1920x1080 for example )... you will see what you want in your second sample ( the original )...
ps.. you can import layers to the video if you wanna do a psd file and have ONE of those layers the one you use in your video ...can label it something like " video layer " ... whatever...

How to solve problem with Installer Package for itunes

Hi! I'm attempting to upadte itunes so I can get the latest software for my iphone. It's a 3GS. Every time when ready to instal it says I have a problem with the installer package - something is missing. What can I do to solve this?

Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL >
Add n Remove Programs(XP)
Programs n Features(Win7/Vista)
highlight ASU and click CHANGE then REPAIR,

Having problem with javax packages

i had problem with compiling my program which is java servlet, and it is complaining that it does exist javax servlet * package , how can i solve this problem?

I don't think servlets come with the standard packages. You have to find it somewhere else. I think you can try J2EE API. There in beta version for 1.3. Should be ok though. Hopefully it will fit right into 1.4.

Problem with oracle packages CREATE PACKAGE some packagename in MaxDB

Hi All,
I am having Problems in Creating Packages from MaxDB ..Does MaxDB supports the CREATE PACKAGE <some packagename>concept ? if so please help me how to achieve in creating packages ..
My sample Oracle package Creation is as follows:
CREATE OR REPLACE PACKAGE BODY acs
AS
FUNCTION add_user (
    user_id     IN users.user_id%TYPE DEFAULT NULL,
    object_type     IN acs_objects.object_type%TYPE DEFAULT 'user',
    creation_date   IN acs_objects.creation_date%TYPE DEFAULT sysdate,
    creation_user   IN acs_objects.creation_user%TYPE DEFAULT NULL,
    creation_ip     IN acs_objects.creation_ip%TYPE DEFAULT NULL,
) RETURN users.user_id%TYPE
IS
    v_user_id       users.user_id%TYPE;
    v_rel_id        membership_rels.rel_id%TYPE;
BEGIN
    v_user_id := acs_user.new (user_id, object_type, creation_date,
                creation_user, creation_ip, email, ...
    RETURN v_user_id;
END;
END acs;
show errors Can you Please Explain me how to write the same Package in MaxDB?
Thanks & Regards,
Shanmukh
Edited by: shanmukh babu on May 16, 2008 10:11 AM

Hi Shanmukh,
MaxDB does not have packages like you'll find them in Oracle.
But you can define your own functions and procedures.
From the code-example you posted, I would say that a procedure will do it ...
I suggest that you first read the documentation on procedures [CREATE DBPROC Statement|http://maxdb.sap.com/doc/7_6/a7/41ee11605911d3a98800a0c9449261/frameset.htm]
There you'll also find an example in the Tutorial section.
Be aware that the procedural capabilities of MaxDB are far less enlarged as in Oracle - but they do exist and work in their realm.
So porting a full PL/SQL application layer to MaxDB procedures may turn out to be quite difficult and/or not the best choice at all.
KR Lars

Problem with support package import SAPKNA7018

Similar Messages

Maybe you are looking for