Problem with swap files after reboot.

Hello
I have installed Solaris 10 10/09 s10x_u8wos_08a on a Sun Fire X4140.
The file system is UFS.
I wish to add more swap space
I have created these two files under /export/home:
-rw------T 1 root root 5368709120 Jun 16 10:12 newswap
-rw------T 1 root root 2147483648 Jun 16 10:38 newswap2
When I enter swap -a /export/home/newswap, the command succeeds and I can see the additional swapspace with swap -l.
I have the following configuration in /etc/vfstab
# cat /etc/vfstab
#device device mount FS fsck mount mount
#to mount to fsck point type pass at boot options
fd - /dev/fd fd - no -
/proc - /proc proc - no -
/dev/dsk/c1t5d0s1 - - swap - no -
/dev/dsk/c1t5d0s0 /dev/rdsk/c1t5d0s0 / ufs 1 no -
/dev/dsk/c1t5d0s7 /dev/rdsk/c1t5d0s7 /export/home ufs 2 yes -
/export/home/newswap - - swap - no -
/export/home/newswap2 - - swap - no -
/devices - /devices devfs - no -
sharefs - /etc/dfs/sharetab sharefs - no -
ctfs - /system/contract ctfs - no -
objfs - /system/object objfs - no -
swap - /tmp tmpfs - yes -
Although it is supposed to work, after reboot, the only mounted swap file is /dev/dsk/c1t5d0s1.
The two file under /export/home aren't mounted as swap. Why?
Can anybody give me some help on this issue?
Thanks

Actually you don't have to create a dedicated slice/filesystem for swap.
You can create files and then use them as swap.
Here is the link from the documentation of Solaris
http://docs.sun.com/app/docs/doc/817-5093/fsswap-59089?a=view
My issue is that although I have configured /etc/vfstab according to the documentation, the swap files aren't automatically mounted on boot. I can only mount them as swap manually with swap -a.
Can anybody help?

Similar Messages

Problems with SD Card After Reboot

Hi, I formatted my SD Card through my Xperia Z3 with Lollipop.I erased all data from Spotify, included the folder spotify.music.Installed the Spotify again with the SD Card connected and all worked fine.I did download from all my albuns, and verified on File Commander, and all data were in SD Card. The problem-->>>After reboot the phone the SD Card isn´t recognized.I did all procedure again, and all return to work, but every time that I reboot the phone, I have to do do all these again. I tested format the SD Card and reboot my phone many times, and it´s all right.It´s necessary only a logon Spotify and the next reboot the SD Card don´t read more. Please, can you help? Thanks a lot!!!

Hi Spotify Family, My problem was resolved.I changed my SD. After was 128GB Ultra SandiskNow 32GB normal Sandisk -> http://www.bslive.com.br/acessorios-informatica/149-cart%C3%A3o-de-mem%C3%B3ria-32gb.html Remember that you have to erase all cache and uninstall the Spotify again before input the new SD Card. Good Luck for All

Problem with mp3 files after upgrading to iTunes 8.0

I have the following problem in iTunes after installing the 8.0 version:
I have noticed that certain (mp3 in this case) files do not play or download Album Cover from iTMS.
These files were in normal condition at least 1 day ago, before the update and I can still find them in my iPhone which has not been sync since the iTunes update.
Things I've done before posting:
1. Checked the files that they still exist in their original location as they are set in iTunes preferences.
2. Those files can be played either in Quick Time or in Finder Quick View (and Real Player and VLC).
3. I have restored the mp3 files from Time Machine but no solution found.
4. I have backed up and erased and created a new iTunes Library and tried to import them again on an empty library but nothing happened.
5. The files existed in iTunes (without Artwork which they did have previously) but I could not play them (double-click etc). Then I removed them, I cannot add them again (either by 'Add to Library' or by drag-drop)
6. Of course, I did a volume repair and permissions repair by booting from the OSX install DVD.
(edit) 7. I moved the files on my MacBook Pro and tried to add them in the iTunes there (completely empty and different library). This also had no result...
So after all these, the files are still not accepted in the iTunes but they still exist (and are playable) in my iPhone after yesterday's sync.
Any ideas? because i'm running short atm
Message was edited by: Periclesm

Had the same problem with the new update. I finally got back to my previous version by using system restore. After the restore I had to go to the "All Programs" list and click on Quicktime and iTunes individually to allow them to re-configure, then had to restart the computer again. After that all's well. My lbrary was intact.
I tried everything to get the newest version to work, including completely uninstalling my current versions of QT and iTunes, then downloading the latest directly from the Apple website, but, after 3 attempts, nothing worked. Guess I'll have to wait for the next update and try again.
By the way, your library is not actually stored in iTunes--it is stored in your Music folder, so you should not lose anything by uninstalling iTunes if you need to.

Problems with writing files after migration

I migrated my old Pismo HD to a new MacBook Pro (a frustrating process which I eventully had to accomplish using a clone of the Pismo disk and a firewire drive) and have a couple of issues.
The most troublesome at the moment is a problem with Safari. It will not let me download files when I am operating as the migrated user, although it will allow downloads if I log in as the user I established during initial setup.
I am also having trouble using Spotlight or the Find utility. Most of the time when I use these, the computer either goes into a kernel panic or grinds away for minutes and never finds anything before I give up in frustration. However, the find function on the top right of finder windows works well.
Any suggestions welcome, thanks!
Various Mac OS X (10.4.8)

Thanks for the suggestions. I had already tried the "Get Info" route with Safari.
The "sudo mdutil -E /" seems to have worked for Spotlight. I did get an error message saying that my volume was not indexed; however, it seems to work now. (I'll get around to indexing the disk eventually.)
I repaired the permissions on my startup disk from the install CD, but the Safari problem is still there (same problem with Firefox).
Any other ideas most appreciated.

Is anybody having problem with uploading files after Os X 10.9.3 update ?

I can't upload files from my computer or dropbox using interface/online plateform because my files appeared grey/inactive, can't press the "chose" or "open"

Hey Guys,
After recent SMC+EFI update on Macbook Air (Mid 2013) OSX v10.9.3, my internal audio device disappeared,
I tried everything I could find in google with no luck. (NPRAM+SMC reset, reloading kents etc.)
THIS IS WHAT SOLVED THE PROBLEM FOR ME:
1. I opened /System/Library/Extensions folder, there I found besides the usual AppleHDA.kext, also an AppleHDA.kext.disabled one.
2. I switched between them (swapped their names, sometimes you'll have to do it from the "get info" menu to take effect)
-- if you don't have this AppleHDA.kext.disabled one, try searching for one lil older than yours in the internet
3. then I unloaded and reloaded the kent dir again-
sudo kextunload /System/Library/Extensions/AppleHDA.kext
sudo kextload /System/Library/Extensions/AppleHDA.kext
And voila!
Hope it helps someone, as I spent hours until getting this to work again

Problem with missing files after moving folders around

Hi,
I keep my music files manually organized. This is mostly because I have a LOT of music and I don't want to take up all the space on my MBP HD. So my music is split up between 2 external drives and the MBP drive.
I was moving around some folders since I wanted to reorganize my music folders, and iTunes can't seem to find the files anymore, and in order to fix it I see I need to find each and every file I moved (which is really not practical).
I tried editing the "iTunes Music Library.xml" file, but it seems to get rebuilt from some other place where this information is stored.
I also tried putting aliases in the old folders' locations pointing to the new ones (iTunes kept saying the files are missing)
Is there any way to simplify the process of moving folders?? This is really strange that such a feature is missing.
Thanks
Yaron

If you have the 'keep' option enabled and let iTunes do the work - take a sound track album as an example - that has various artists and you didn't tell iTunes that the album was a compilation album - then iTunes will put all the tunes into into the iTunes Music folder as Artist>Album>Song - if you have the compilation option enabled for the tunes on that same album - iTunes will nest it as iTunes Music>Compilation>Album>Song. This helps reduce the clutter in the iTunes Music folder with a thousand artists and only one tune for that artist.
With the 'keep' option selected iTunes will move tunes automatically within the iTunes Music folder. Since iTunes moved the files it can keep track of the links.
To create a second library launch iTunes with the 'option' key down and follow the dialog box instructions. I have a 'Master iTunes Library' on my internal HD and several ext HD's with other libraries which I give unique names i.e.: Really Big Music. I give the library data base file its' own unique name so I don't accidentally erase the wrong file. I also keep all the files that you would normally see for an iTunes library on the ext HD (iTunes library. .xml, art work etc.,). If you are into lots of movies and TV Shows you could create a library on and ext HD with only video content and name it accordingly. You would keep all the files for that library including the library 'management' files on the ext HD in the same nesting as you would find on your internal HD.
This strategy works for me. I tried to manage the files by myself at one point and just had to many problems so I decided to not fight City Hall and go with the flow and it works for me.
MJ

Problem with PDF file after saving from MS Word

When I have an image in MS Word and I save to PDF, the page with the image becomes black as you can see the text at the bottom is black instead of white. Also, I have Replace Document Colors active to invert the PDF color. Anyone know why inserting an image messes with the text this way?

Not sure, but it may deal with transparencies if those were used.

Problem with iWeb 09, after the publication in a local file.

*Subject: problem with iWeb 09, after the publication in a local file, i can't see my blog, nor my photos, but before that all was working fine.*
After the publication in the local file, I see all my pages, but there is a mistake on the page "Blog" where I just can see the top of my page, it's cut and I can't see it entirely, so I can't see the inputs while I should see 3 news or 3 inputs. And it's the same for the "Photos" page where the page is cut, I can't see the photos, and it's just written : "Put the slide show and subscribe".To finish, when I want to activate the comments, it doesn't work neither.
Please help me.

I want to activate the comments, it doesn't work neither.
The comments feature is only available when you publish to the MobileMe server, so I don't think you can use it when you publish to a local file.

Solutions for problems with QuickTime files in After Effects CC (12.0)

We have a new blog post up about solutions for problems with QuickTime files in After Effects CC (12.0) because of conflict with DVCPROHDVideoOut QuickTime components.
Please read that post and let us know here on this forum thread if you have any questions or comments.
Also, please let us know if the proposed solution works for you.

Mark - The new document that we published is meant to address a specific issue. You can confirm you have the issue by the following:
Adobe QT32 Server is not running when you receive these errors. Keep Activity Monitor open to track whether or not it is running.
The crash log for QT32 Server indicate CoreAudio as the last component called. You can find the crash logs in Users/username/Library/Logs/DiagnosticReports. The report will look like this:
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   ???                                     0x04981f90 0 + 77078416
1   com.apple.audio.CoreAudio               0x949d05c1 __Call_block_invoke_03 + 56
2   libdispatch.dylib                       0x94a90f8f _dispatch_call_block_and_release + 15
If this is not the issue you're having, please start a new thread and provide the usual data. If your problem does match this issue, please double-check that you've followed the steps in the new document and post back here.

I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR

I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR I never had this problem before was there some kind of update that could of cause this?

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
I can not believe that Apple did not test this for major bugs like this one is.
I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

Problem with Receiver File adapter

Hi
I have a problem with receiver file FTP adapter, while writting file in target folder, connection is failing, after retries, it writting file again. How to avoid this situation, is there any way to write the leftout part in the file.
VS

Hi
Thank u all, Problem is solved, i changed write mode to Over write existing file. It is working fine.
VS

Problem with import file type setting

Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
Can't find a way to overcome this. Thanks for any help.

Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?

SFTP MGET of large files fails - connection closed - problem with spool file

I have a new SFTP job to get files from an FTP Server. The files are large (80mg, 150mg). I can get smaller files from the ftp site with no issue, but when attempting the larger files the job completes abnormally after 2 min 1 sec. each time. I can see the file is created on our local file system with 0 bytes, then when the FTP job fails, the 0 byte file is deleted.
Is there a limit to how large an ftp file can be in Tidal? How long an ftp job can run?
The error in the job audit is Problem with spool file for job XXXX_SFTPGet and an exit code of 127 (whatever that is).
In the log, the error is that the connection was closed. I have checked with the ftp host and their logs show that we are disconnecting unexpectedly also.
Below is an excerpt from the log
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.055 : Send : Name=SSH_FXP_STAT,Type=17,RequestID=12
DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.055 : Transmit 44 bytes
DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.055 : Remote window size decreased to 130808
DEBUG [PlainSocket] 6 Feb 2015 14:17:33.071 : RepeatCallback received 84 bytes
DEBUG [SSH2Connection] 6 Feb 2015 14:17:33.071 : ProcessPacket pt=SSH_MSG_CHANNEL_DATA
DEBUG [SFTPMessageFactory] 6 Feb 2015 14:17:33.071 : Received message (type=105,len=37)
DEBUG [SFTPMessageStore] 6 Feb 2015 14:17:33.071 : AddMessage(12) - added to store
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.071 : Reply : Name=SSH_FXP_ATTRS,Type=105,RequestID=12
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.071 : Send : Name=SSH_FXP_OPEN,Type=3,RequestID=13
DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.071 : Transmit 56 bytes
DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.071 : Remote window size decreased to 130752
DEBUG [PlainSocket] 6 Feb 2015 14:17:33.087 : RepeatCallback received 52 bytes
DEBUG [SSH2Connection] 6 Feb 2015 14:17:33.087 : ProcessPacket pt=SSH_MSG_CHANNEL_DATA
DEBUG [SFTPMessageFactory] 6 Feb 2015 14:17:33.087 : Received message (type=102,len=10)
DEBUG [SFTPMessageStore] 6 Feb 2015 14:17:33.087 : AddMessage(13) - added to store
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.087 : Reply : Name=SSH_FXP_HANDLE,Type=102,RequestID=13
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.087 : Send : Name=SSH_FXP_READ,Type=5,RequestID=14
DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.087 : Transmit 26 bytes
DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.087 : Remote window size decreased to 130726
DEBUG [PlainSocket] 6 Feb 2015 14:17:33.118 : RepeatCallback received 0 bytes
DEBUG [SFTPChannelReceiver] 6 Feb 2015 14:17:33.118 : Connection closed: (code=0)
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : Disconnected unexpectedly ( [errorcode=0])
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : EnterpriseDT.Net.Ftp.Ssh.SFTPException: [errorcode=0]
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : at EnterpriseDT.Net.Ftp.Ssh.SFTPMessageStore.CheckState()
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : at EnterpriseDT.Net.Ftp.Ssh.SFTPMessageStore.GetMessage(Int32 requestId)

I believe there is a limitation on FTP and what you are seeing is a timeout built into the 3rd party application that tidal uses (I feel like it was hardcoded and it would be a big deal to change but this was before Cisco purchased tidal) there may have been a tagent.ini setting that tweaks that but I can't find any details.
We wound up purchasing our own FTP software (ipswitch MOVEit Central & DMZ) because we also had the need to host as well as Get/Put to other FTP sites. It now does all our FTP and internal file delivery activity (we use it's api and call from tidal if we need to trigger inside a workflow)

Problem with swap files after reboot.

Similar Messages

Maybe you are looking for