Problem with switch SG300-28P Poe and Avaya 1408 telephone

Hi Team
We have a model SG300-28P Switch 28-Port Gigabit PoE Managed Switch, in every port we are allowing the voice VLAN and data VLAN (trunk), happens to be off this type of phone, we reconnect the cable and port the switch is dropped, so that the voice vlan phone is lost and no longer work.
Thanks for your comments.
Regards

Hi Yesenia, did you contact Avaya support? Did you configure the phone for a voice and data vlan?
I'm trying to dig through the Avaya website and looking at the fact sheet and user guide it has no mention of VLAN.
Is the switch supported for the usage of Avaya Aura Communication Manager call processing system?
-Tom
Please mark answered for helpful posts

Similar Messages

  • Securing SG300 28P PoE Swtich.

    Greeting's, I would like to start by apologizing. I have absolutely no knowledge in switch security management but I've been tasked with it given the shortage of personnel. I have a SG300-28P-PoE switch that needs to be securely configured. I've done the basics of upgrading the firmware to the latest. Given my lack of any experience whatsoever, please include complete procedures (hand holding, I'm sorry).
    I wanted step-by-step guidance of:
    1. Locking down ports by MAC address.
    2. DDoS protection.
    3. Lock down login from all but 1 IP and only allow browser based SSL login. No TELNET, SSH or other method.
    4. Shutting down any services on the switch.
    Any other recommended security steps to secure the switch.
    Thanking in advance,
    Parth

    Hello Parth,
    Thank you for using the Cisco Small Business forums. I am a eContent developer and part of the Small Business Support Community.
    Looking over the questions that you've asked, I found a few articles that might help you with the configuration changes you'd like to make:
    As Brandon mentioned, the Knowledge Base contains many documents with step-by-step procedures and screenshots for common tasks. Port-security is an excellent solution for the first problem. You can configure ports to lock down when a MAC address is changed:
    Port Security
    The SG300 security suite has many options for protecting against DDOS attacks:
    DDOS
    In regards to disabling/enabling services and restricting access to the web console, this article provides some guidance (uncheck the services that you do not wish to use-- in relation to your question, uncheck all except HTTPS):
    Enabling SSH/Telnet/HTTP
    I hope that these articles help to answer your question. Please remember to mark this question as answered and rate it if it helps to address your issue so other users can benefit from it, and feel free to ask any further questions you might have!
    Best,
    Gunner Grim
    Cisco eContent Developer

  • Problem with switching tabs in top level navigation for Roles

    Hi,
    I've created two tabs (based on two roles) in the portal top level navigation menu. When clicking the first one it opens as it should. Then when clicking on the second tab it will not open, instead the first tab open up again, it sort of switches back automatically.These  two roles  are  basically consists of worksets and iviews(accessing to r/3).
    Does anyone have any expericene with this type of problem?
    please  suggest me
    Thanks
    Aravinda

    Hi Aravinda
    Please check this link
    Re: Problem with switching tabs in top level navigation
    Regards
    Geogi

  • Problems with X-Fi Xtreme Music and

    Hi people.
    I have been having some problems with enableing EAX in ganes and so on.
    Fot instance in Warcraft 3 Frozen Throne, it says something like this "The 3D provider could not be installed, reverted to next best provider".
    EAX in that game is only version 2, so why can i use EAX in games?
    Thanks for any and all help

    Have You forget? You are back in the 80's again! Use Creative Cr..s Mode Switcher and manually switch to Game Mode. And don't forget to manually switch to other Mode before launching any other applications. If You don't have Mode Switcher (Volume Panel) in system tray and obvoiusly don't have any system slowdowns and not experioncing high RAM usage that means You don't have Creative Bloatware installed. You can find it on X-Fi instllation CD.
    Have fun and thank Creative marketing and programming crews for this! Message Edited by cryogenic on 06--2006 0:09 AM

  • Cp1700 - Any problems with switching existing printer with stored printer?

    I am having problems reading the LCD panel for my cp1700 (not all the text shows - common problem). I have another cp1700 that I have had stored for about 5 years (saving for parts. I think this "stored" printer squeaked when printing). I considered switching the LCD panels but it looks as if this is a complicated procedure. So I am wondering if I will encounter any problems with switching the printers? I will be putting in new ink cartridges but wondering if the printheads will cause a problem after being stored for so long?

    This don't completely resolve your concerns, but I've had no trouble printing from OS X 10.7 to an Epson Artisan 810 connected to a Mac running OS X 10.6.8.  I may even have been able to print to it wirelessly, but I can't remember.  Apple issued an update to the Epson printer drivers fairly recently, which one would hope would have addressed any issues.  In any case, I'd make a bootable clone of your Mac before you upgrade.  If things aren't as you hope, then you can restore the clone to your main disk drive and be back with OS X 10.6.

  • I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

  • Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    Is anyone having problems with the battery heating up and draining the power?  Mine has been doing this for about 2 months now.

    This is a major problem with Lollipop, but yo said it started 2 months ago.   Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again.   You might want to clear your cache before reloading.  Not sure this is your problem, but worth a try.  Good Luck

  • Problems with creation of catalogue XPGrpwise and temporary

    Problems with creation of catalogue XPGrpwise and temporary files.
    I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
    Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
    Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.

    Cvetaev,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • HT4009 Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I wan

    Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?

    Contact iTunes Store Support.

  • I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

    I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • Performance Problems with MS IE 6.0 and EP 7.0 (2004s)

    Hello,
    we have a problem with ie 6.0 webbrowser and EP 7.0 (2004s). When we open for example the theme editor in the ep-system-administration site we must wait with MS ie 6.0 webbrowser ~ 18s for the site opening. With firefox 2.0 we can open the theme editor with ~ 1s.
    Have/Had anybody the same problem? - Or is this a knowing problem with ie 6.0.
    We used for the network analyse the tool: httpwatch 3.2. We can see, that the ie 6.0 must wait into the all-time of 18sec. 13sec for opening the site: emptyhover.html.
    - Thanks in advance for a tip !
    Best Regards,
    Ralf

    Hello Ameya and hello Shao,
    we use the version SP12 NW 2004s. We have the this problems with a base application of portal: theme editor.
    We can see in the httpWatch 3.2 analysis tool, that the ie 6.0 load a much of cache files from the client webbrowser. Could it be this problem? - I red in this forum problems with the webbrowser-parameter: "Empty Temporary Internet Files folder when browser is closed"
    Thank you for your helping.
    Best Regards,
    Ralf

  • I have a problem with mail.  the spelling and grammer check box before sending the messege is no longer there.  I did everything but cannot get it back.  is ther anyone who knows how to get the box with spelling and grammer checks before sending

    i have a problem with mail.  the spelling and grammer check box before sending the messege is no longer there.  I did everything but cannot get it back.  is ther anyone who knows how to get the box with spelling and grammer checks before sending the mail.
    Also the mail is acting very funny by not getting the rules work in a proper method.  Is ther a software to repair mail.

    i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check. 
    This problem just started for about 3 to 4 days now.  earlier it was working normally.

  • Problem with installing Photoshop elements 9 and adobe support advisor

    Hi, I've received a graphic tablet with 2 programs: the first has been downloaded and works perfectly while the second, PSE9, has been giving me problems for at least a week!
    I downloaded it and now I have a winzip file full of strange things (one of this is set up exe which tells me that I have to install adobe support advisor) and two files which said 3DF.tmp and PSEP9(1).zip.download and if I try to click them they tell me that I have to find on the Net the program to open them because I can't. And I don't know which program is required.
    I tried a lot of times to download the adobe support advisor, I have enough space on my disc and my farewall is deactivated, but when the program begins I saw this annoyant message
    cpsid_82829s5 Missing installation file bootstrapper error occured
    with this code for a support from adobe 00-67325-032018052012
    I unistalled it and retried, but nothing.
    Please, I just want to use my tablet with the programs which are comprised in the package, why it's so difficult to download this damn photoshop elements 9????????????
    Thank you

    In the error message it doesn't tell me
    "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again,"
    neither "Installer failed to initialize. File not found. Please download Adobe Support Advisor to detect the problem."
    and I have enough space and I have Windows xp then I should be able to install it. I tried to unistall and install again the support advisor but nothing. I'm desperate.
    Messaggio originale----
    Da: [email protected]
    Data: 18/05/2012 22.20
    A: "Questionlady"<[email protected]>
    Ogg: Problem with installing Photoshop elements 9 and adobe support advisor
    Re: Problem with installing Photoshop elements 9 and adobe support advisor created by Jeff A Wright in Trial Download &amp; Install FAQ - View the full discussion
    Did you try the steps listed in http://helpx.adobe.com/creative-suite/kb/troubleshoot-error-messages-b ootstrapper-cs5.html which was identified by the Adobe Support Advisor?  If so can you please list each step and the result of those steps.  This will allow us to best advise you on your next steps.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4420419#4420419
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4420419#4420419. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Trial Download &amp; Install FAQ by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Problem with QT 7.1.5 and Sorensen codec?

    Has anyone noticed a compatibility problem with Sorensen video 3 codec and Quicktime 7.1.5? This problem did not seem to exist in prior versions (hence have been asking how to reinstall previous version but seems impossible). Some of the earlier postings discuss software that may be designed with Sorensen codec... these may be the ones not functioning properly now (video no longer works). Does this sounds plausible?
    Mac Mac OS X (10.4.8)
    Mac Mac OS X (10.4.8)
    Mac   Mac OS X (10.4.8)  

    That may be true, Jack, but Edmund said that the movie played in QuickTime Player. So his problem is most likely not a bug in QuickTime, though I can't say for certain.
    And as I said above, I have no problem playing Sorenson-encoded content on my Intel-based Mac with QuickTime 7.1.5, so more details about your content and setup (including any third-party codecs you may have installed) so that people can determine what the difference might be between the content that plays and the content that does not, or what's different in the systems, would be helpful, I'm sure.

  • I have a problem with Safari: when it opens and I go on google, it opens a page that says: PLEASE UPDATE INTERNET EXPLORERE.   What should I do?

    I have a problem with Safari: when it opens and I go on google, it opens a page that says: please update internet explorer!
    What should I do?

    It's a scam. Have a look at this thread:
    https://discussions.apple.com/thread/6058094?tstart=0

Maybe you are looking for