Problem with Syncing configuration to our CSM

Recently we have had problems syncing between our pair of redundant CSM's.
Here is the behavior we observe when we run the command on one of our 6500.
! config 6500-2
module ContentSwitchingModule 2
ft group 1 vlan 4
priority 10 alt 20
! config 6500-1
module ContentSwitchingModule 2
ft group 1 vlan 4
6500-2#hw-module csm 2 standby config-sync
After we run this command on 6500-2 the log shows that the sync happens and the CSM config is deleted on 6500-1 and then nothing happens.
Here is the exact logout on each of the 6500.
6500-2(ACTIVE)
May 28 17:45:11.353 est: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Bulk sync started
May 28 17:45:11.369 est: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configurations to Standby CSM, this may take several minutes!
May 28 17:45:12.749 est: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
May 28 17:45:14.869 est: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
May 28 17:45:24.345 est: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Manual bulk sync completed
May 28 17:45:24.349 est: %CSM_SLB-4-REDUNDANCY_WARN: Module 2 FT warning: Config Sync does not save Standby running-config to startup-config
6500-1(STANDBY)
May 28 17:45:17.088 est: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Started clearing configuration
May 28 17:45:17.088 est: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Completed clearing configuration
May 28 17:45:17.096 est: %CSM_SLB-4-REDUNDANCY_WARN: Module 2 FT warning: Standby: Config Sync does not save running-config to startup-config
May 28 17:45:17.100 est: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Previous configuration are being deleted from supervisor
May 28 17:45:17.104 est: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Previous configuration being deleted on Standby CSM
May 28 17:45:17.104 est: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: New configuration are being configured
As you can see the configuration ends up being deleted from the STANDBY and the new configuration never gets configured to 6500-1(STANDBY).
We have tried replacing the SUP engine however this did not help. We will try to replace the CSM next. If anyone can shed some light on why this would happen I would apreciate it.

Hi
pls check for IOS bug CSCtd09117 and CSCsx64648

Similar Messages

Sync and problem with .mac configuration

Hi
I am having the following problem with Sync Now to my .mac account
Following the initialisation of Sync, the following message appears.
"There was a problem with the sync operation
Could not retrieve .Mac configuration."
And another message says
".Mac login failed."
The syncing to I mac has not functioned since Oct 2nd
Can someone advise how to rectify this problem
G5 Mac OS X (10.4.8)

Can you log into .mac mail? That will tell you if your username and password are OK.
I recently had a similar problem, so I unregistered my work and home computers (using the Advanced tab of .mac preferences) from .mac then re-registered them. At that point, you are offered the initial sync choices like the first time you connected to .mac.
Be careful that you don't overwrite your data. I highly suggest making backups of your Address Book, Safari Bookmarks, iCal, iDisk files, etc. on all computers before starting the process.
- Wayne
PowerMac G5 Mac OS X (10.4.8)

Problem with syncing AD users (LDAP)

I am running into a 'problem' with syncing users from ad. I'm pretty sure i'm doing something wrong but i can't figure it out.
When i sync manually the 'pop up' shows that it's synchronizing and after a few seconds it tells me "OK". But there are 0 users imported.
http://www.dualdude.net/bm/run_ldap_sync.jpg
The connection and credentials to access the AD work since they are also used for Zarafa and Samba AD synchronization. The AD is running on an Windows Server 2008 Enterprise x64 machine.
This is a screenshot of the configuration used:
http://www.dualdude.net/bm/ldap_config.jpg
Any thoughts on what i'm doing wrong?

I got the same problem when using groupfilter:
User Filter: (&(|(objectClass=Person)(objectClass=orgPerson)(ob jectClass=inetOrgPerson))(groupMembership=cn=users ,ou=org,o=firma))
Group Filter: (&(|(objectClass=group)(objectClass=groupOfNames)( objectClass=groupOfUniqueNames))(|(cn=G4)(cn=TC*)) )
Do you use groups for the allowed users in teaming?
>>> lnijhuis<[email protected]> 14.01.2010 16:36 >>>
Thank you for your reply. I guess the comma's should be right. When i
change the first "ou=" in the Base DN to "cn=" the error message states
that the best it can do is reach
ou=OrganizationalUnit,dn=domain,dn=local. So i guess that shouldn't be
the problem?
By default there is a container "Users" in AD, which we don't use. The
person that configured the server created an OU on the same level as the
default container. THe name of this OU has a space in the name, like
"Organi Zation". This OU contains another OU called Users. This is where
the users are located. When i run the ldap query i don't get any errors
about the base DN. It does when i change it.
The full filter is:
(|(objectClass=Person)(objectClass=orgPerson)(obje ctClass=inetOrgPerson))
lnijhuis
lnijhuis's Profile: http://forums.novell.com/member.php?userid=63756
View this thread: http://forums.novell.com/showthread.php?t=397993

Problems with Syncing two different libraries on one mac

Ever since I downloaded itunes 11 onto my mac I am having problems with syncing. We have two libaries on our mac and can still easily move between the two, each keeping our own playlists, and music/podcast libaries. The problem is with the syncing to our ipods. The playlists stay separated, but unfortunately the sync update pulls both music libraries and puts it on each of our ipods. Having very different music tastes, this is a drag.
A second issue - there is still that problem of having issues with purchased music not staying in playlists (on ipod) after syncing.
I've tried looking around the itunes tutorials and articles but wasn't having luck. any feedback would be greatly appreciated.
Oh, in case it matters, one of us is using an Iphone and the other an ipod touch.

you might have to find a third party program to get those songs off her ipad onto the computer, apple doesnt support that unless they are purcahsed from itunes store because of DRM (Digital Rights Media) another word for copy write. so theres not a whole lot of hope for that, but you can always create a new user on your computer
>user>+ icon>Create new user make it admin
-if they are how ever purchased from itunes you would still make that new user, plug the device into itunes and authorize the computer by clicking store on the top of your screen where file edit and view are, Store>authorize this computer
once thats done you'll then plug that device in to the computer and on the left side of itunes you'll see devices and "Device name" the device its self, right click or control click the name and choose transfer purchases, anything that has ever been purchased of gotten for free will sync onto the computer,
you cant just simplay pull the songs off the device to the computer, doesnt work like that

Problems with Syncing to Lightroom Mobile

I have the following problem with syncing to Lightroom Mobile:
In Lightroom desktop it seems that the collections will be uploaded correctly (number of images is counting down to zero). Changes will also be uploaded.
In the web interface I see the collections somtetimes and sometimes not. I can make them appear if I chose the "make collection public" in Lightrrom desktop.
In the iOS App there is absolutely nothing happening: "There are no collections"
I have the recent versions of all applications and OSs. I have deleted and reinstalled the iOS App.
Thanks in advance for your help!
Regards
Zippo

Hi,
we should have fixed this on our side now, please try to sync again and let us know if it helped.
Thanks,
Ignacio

Problems with syncing Adobe Ideas with Adobe Creative Cloud

Dear Sir/Madam,
Since yesterday (22.04.2014) I have problems with syncing Adobe Ideas (in my iPad) with Adobe Creative Cloud.
Could you please help me with this issue?
Thanks in advance

Hello,
I do not understand why there is no professional communication about the problem. I get the impression that Adobe doesn't know that many people use their App as advertised: As a quick professional sketching tool that syncs with Creative Cloud. Not to fix the problem means more people not trusting the cloud idea. I am actually a big fan of the CC, mostly because of regular updates. But the mobile apps seem to fall out of the normal update scheme. Are they not as important as the 'main software'?
When will the bug be fixed? Just to make clear: As there - up to now - is no other way to get the original idea files on the computer the adobe idea app is useless unless you fix the problem and/ or include the possibility to sync files via USB.
Meanwhile my Workaround:
You need Phoneview or another software that shows the files on your mobile device.
Open it - choose "Apps" - click on "Show all Apps" - click on "Adobe Ideas"
Than go to:
Library/Private Documents/documents/data/files/
there you find folders with cryptic names
Download one of the folders
Open the Folder
select all files in the folder and zip them
Change the extension from .zip to .idea
and voila
you can open it with Adobe Illustrator!
A long way, but for now the only solution to get the editable vector file on your computer.
Best regards
Jo Jacobs

Problems with Syncing iPhone 3G (4.2.1. iOS). What is appearing in the status bar is "Syncing "untiled playlist.." and its stuck at backing up. I noticed that my name has been replaced to "untitled playlist". Whats wrong

Problems with Syncing iPhone 3G (4.2.1. iOS). What is appearing in the status bar is "Syncing "untiled playlist.." and its stuck at backing up. I noticed that my name has been replaced to "untitled playlist". Whats wrong

Welcome to Apple Discussions!
Maybe a long shot, but WD is not known for the quality of some of their enclosures, although I do like the drives themselves. It may be worth mounting this drive in a different enclosure, something like one of OWC's FireWire enclosures with the highly reliable Oxford chip sets. I wouldn't be inclined to trust a WD enclosure, especially if it already seemed to be acting in a flakey manner.
Here's an example of what I mean:
http://eshop.macsales.com/item/Other%20World%20Computing/MEP924FW8E2O/
I have 3 of these and I really like them.
From what I understand, if the drive spins up, it is often possible to recover data from it. To be absolutely certain to destroy the data, you just about have to take a hammer to the disk. Hopefully, there will be a way to get your data back.
Good luck!

I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?

I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?

fighter19lisa wrote:
that only makes it say its synced, when its not.
No, it does not. It transfers purchases from the iDevice to the computer. The computer must be authorized for the Apple ID that the content was acquired with.
fighter19lisa wrote:
my playlists wont show up on the phone.
Are they selected to sync? Is Manually Manage content on the device selected?
fighter19lisa wrote:
i had to change my password for my aol account again and i still cannot get my email on my phone to even work
What does that have to do with syncing content to the device? FYI, nothing.

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

So, in iTunes, when you look at the shuffle's content (in the sidebar) and click on the playlist under the shuffle, over to the right, the songs are in your desired order, correct? Where do you look, or what do you do, that indicates the playlists are in alphabetical order? Are you saying that when you play the songs while using the shuffle, they play in alphabetical order?
If so, when you listen to the songs on the shuffle, are you using the playlist, or are you using the All Songs list? If you are in the default All Songs list, with the shuffle's power switch set to play-in-order (the middle position), the songs play alphabetically, I believe.
The 3rd gen shuffle uses VoiceOver. If you are in the All Songs list, you need to use VoiceOver to switch to the playlist (see manual linked below for details). When you are in the playlist (with the shuffle's power switch set to play-in-order), then the songs should play in playlist order.
There are more details in the manual for the 3rd gen shuffle, which is online here
http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
See page 22 for the section about setting up and using VoiceOver. The part about switching playlists starts on page 23 (Using the Playlist Menu).

After update 8.1.2 i had problem with sync my content from ITunes with IPod

After update 8.1.2 i had problem with sync my content from ITunes with IPod. It stucks on moment when its waiting for implementing changes (step 5 of 5) Hours and hours i'm waiting but still the same. So i cant use my Ipod at all. I restarted Ipod and delete and download Itunes again. Still stuck in the same moment. Help please. Someone has some problems like that?

I have an error message saying that "An unknown error occurred (-54)"

Problem with syncing audionooks

Hi
I have an iPod shuffle 4th generation ..
I have a problem with syncing audiobooks. I have the audiobook file at my desk. When I drag and drop to the audiobooks section in iTunes it doesn't go to it's right place. Instead, it goes to the music section.
I tried to restore it but the problem still there..
can anyone help me please ?
Thank you

picas wrote:
Change the media kind to Audiobooks. If they're mp3s iTunes will only recognize them as music files.
Thank you so much .. it worked

HT1296 Have a problem with syncing. I get this message: The ipod Bill's Ipod" cannot be synced because there is not enough space to hold all of the items in the iTunes library (additional 2.4GB required) I don't understand as I have much more space than 2

I recently ran into a problem with syncing my ipod touch to itunes on my Windows 7 pc. It had previously been synced to my older laptop
and I wanted to change to my newer Windows 7 laptop's itunes library that I had already been syncing with.
Anyway, I started seeing this message that prevents my from syncing:
The iPod "Bill's iPod" cannot be synced because there is not enough free space to hold all of the items in the iTunes library
(additional 2.48 GB required)
Not sure if it is talking about my iPod free space or my PC itunes library free space. Either way I have 11.0 GB free space available
on my iPod and 412 GB free space available on my Windows 7 PC.
How do I handle this problem? Please help!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks

It is saying that the iPod does not have enough free storage to sync all the items yu have selected to sync to the iPod. You need 2.48 GB more free on the iPod. You need either to select less to sync or delete some content form the iPod.

Problems with syncing my ipod

Yesterday I updated my iPod tot 1.1
After that it had that crappie bug with the video's, so I downgraded my iPod. After that I updated it again tot 1.1
Now I have a problem with syncing my iPod (video's only).
First I had some series it synced with my iPod, also after the first update. But after the second update it tells me there are some files it couldn't sync. (some videos it did sync btw, and the problem with the sound has gone, I can play movies normal now!)
So the problem is now that it doesn't sync all my movies anymore, and I converted all of them with the same program..
Anyone has the same problem or knows how to solve?

Mijn advies: terug naar versie 1.0. Tenzij je versie 1.1 nodig hebt, natuurlijk (voor radio o.i.d.). Of wachten op versie 1.2
Ik heb zojuist versie 1.0 geherinstalleerd, en alles werkt nu prima. En telkens als iTunes vraagt of ik de nieuwste versie wil installeren klik ik op NEE.

Problem with audio configuration

when i turned on Itunes on on my computer it had this message: Problem with audio configuration. Audio/video playback may not operate properly. How do I fix it?

I reinstalled iTunes & QuickTime as per giterdone response to rpestow on 12 November
instructions at: http://docs.info.apple.com/article.html?artnum=93698
Thanks giterdone

Problem With Cutom Configuration with Object Type

Dear Guru's
I am working WebUI, I am facing a problem with Custom Configuration.
1. The initial requirement to control the visibility for a dropdown event in ERP Quotation.
2. To this i copied the default configuration to custom configuration with custom Object type and Subtype.
       CONFIG KEY: ZPJQTN
       OBJECT TYPE: ZOTYP_CONFIG
       OBJECT SUB TYPE: ZSTYPE_CONFIG1
3. I have created customm fields in enhancement.
4. Now i chosen my new configuration (ZPJQTN,ZOTYP_CONFIG,ZSTYP_CONFIG1), when i click Show available fields, the custom fields are not showing. Instead the created fields are available at other configuration.
5. I am able to control the visibility for the standard available fields.But i am not getting the custom created fields
(Note: I have created the Object type and Object sub type as follows: SPRO->CRM->UI Framework->Define Object Types
Object type: ZOTYP_CONFIG Callback class: ZCL_CONFIG_CALLBACK
Redifned the method: IF_BSP_DLC_OBJ_TYPE_CALLBACK~GET_OBJECT_SUB_TYPES
Coded as below:
data: lv_subtype type bsp_dlc_object_sub_type.
lv_subtype = 'ZSTYP_CONFIG1'.
append lv_subtype to result.
lv_subtype = 'ZSTYP_CONFIG2'.
APPEND lv_subtype to result.
Now Please suggest me how to achieve this.
Also please let me know, whether i am following the correct procedure for controlling the visibility.
Thanks in Advance,
S.Meganadhan.

Hi Harshit,
I added custom fields using AET only.
I am able to see the field got added in the structure. I am able to access GET and SET methods of the field.
But the problem is, it is not getting saved. Am i missed any configuration step?
Please suggest me.
Thanks in advance,
Regards,
S.Meganadhan.

Problem with Syncing configuration to our CSM

Similar Messages

Maybe you are looking for