Problem with tab access after user deleted from group

9ias version 9.2.0.1
There seems to be a problem (potential bug???) when deleting a user from a portal group. I have a portal page set up with multiple tabs. These tabs can only be accessed by users belonging to certain portal groups. When i add a user to a group, the user sees the necessary tabs when authenticated. However, if i delete this user from the group there is a problem. When the user re-logs into portal, they will see all the tabs belonging to the group they were deleted from. However, when they select this tab nothing happens and the portal goes into a state of flux (doesn't navigate). One way to resolve this is to go in as a portal admin, edit any tab and select apply. The portal then seems to refresh.
This solution isn't practical. Is this a bug? Is there a patch or another solutions??? Thanks

Hi Turloch! Thanks for your help!
Those SQL Statements were extracted from the MS Access application that we will continue to use to access the data , now on an Oracle Database.
I don't know what I can do to make this kind of statements works as it is on Access database. The first query, that I called Query1 works fine on Oracle, I just mentioned it because the 2nd Query , named Query2, use it.
I'm not able to understand why when I change the 1st. query to a "make-table" query the Query2 works as desired, but if I keep the Query1 and Query2 as it is on the MS Access Application I got the ODBC error message and the ORA-00904 error message , related (I think!) to the FieldTmp field used on the LEFT JOIN statement (AND).
As I told before, if I change the AND clause to compare to another field, as instance, field1 :
FROM Query1 LEFT JOIN Table3
ON (Table3.field1=Query1.Field2) AND
(Table3.field5 = Query1.Field1)
it works.
Please, is there anything that I can do to keep the MS Access Application unchanged?
Oracle = 8.1.6
Oracle ODBC Driver = 8.1.6.4
Oracle Migration Workbench = 1.3.1
Thanks in advance,
Elaine Viel Denadai

Similar Messages

  • Problems with network access after applying batch of updates

    Hi all,
    Yesterday, I've applied a batch of updates to my Windows Server 2012 Hyper-V server. All went good, but after the reboot I was not able to access... Microsoft website for update download, or WSUS to Report and detect updates.
    For my troubleshooting I did:
    ping www.microsoft.com (DNS goes well)
    With Wireshark running, did a http request to www.microsoft.com and I don't see any request leaving the NIC. This goes to *.microsoft.com
    This happens either with or without Proxy set up.
    I've reset Internet Explorer Settings, all with no luck.
    When trying over our WSUS, I get error 80244019, and with wireshark I can see that WSUS may not be able to get the updates because it is replying with 404 not found.
    HEAD /Content/C5/EC7E6D6C8063BF4424CE2EC75EBC977953CF11C5.cab HTTP/1.1
    Connection: Keep-Alive
    Accept: */*
    Accept-Encoding: identity
    User-Agent: Microsoft BITS/7.6
    Host: srv-dc-sys:8530
    HTTP/1.1 404 Not Found
    Content-Length: 1245
    Content-Type: text/html
    Server: Microsoft-IIS/8.0
    X-Powered-By: ASP.NET
    Date: Wed, 14 Jan 2015 10:34:49 GMT
    HEAD /Content/C5/EC7E6D6C8063BF4424CE2EC75EBC977953CF11C5.cab HTTP/1.1
    Connection: Keep-Alive
    Accept: */*
    Accept-Encoding: identity
    User-Agent: Microsoft BITS/7.6
    Host: srv-dc-sys:8530
    HTTP/1.1 404 Not Found
    Content-Length: 1245
    Content-Type: text/html
    Server: Microsoft-IIS/8.0
    X-Powered-By: ASP.NET
    Date: Wed, 14 Jan 2015 10:34:49 GMT
    HEAD /Content/C5/EC7E6D6C8063BF4424CE2EC75EBC977953CF11C5.cab HTTP/1.1
    Connection: Keep-Alive
    Accept: */*
    Accept-Encoding: identity
    User-Agent: Microsoft BITS/7.6
    Host: srv-dc-sys:8530
    HTTP/1.1 404 Not Found
    Content-Length: 1245
    Content-Type: text/html
    Server: Microsoft-IIS/8.0
    X-Powered-By: ASP.NET
    Date: Wed, 14 Jan 2015 10:34:49 GMT
    Seems to me two issues here. One I might workaround with deleting the WSUS content, and let WSUS resync(may solve).
    The other... It's strange because can't seem to have www.microsoft.com leave my nic...
    As part of the troubleshooting, I have two nics teamed, 1 nic for live migration, 1 nic for cluster network, and teaming, obviously has itself a single default gateway.
    What can I do to go forward?
    PS: One last finding. In WSUS this server does not report since 13th January at 11:00 a.m. I've forced it to report, and still no update/report
    Nuno Silva

    Hi Nuno,
    Do you mean that you can't see a HTTP request of
    www.microsoft.com when you access it with Internet Explorer?
    Can you successfully access the www.microsoft.com with the Internet Explorer? If yes, it should be normal. Because
    www.microsoft.com is a CNAME.
    >>but after the reboot I was not able to access... Microsoft website for update download, or WSUS to Report and detect updates.
    Please try to update from Microsoft Update. Then post the windowsupdate.log here. It may give some hints.
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Problem with junkmail folders after moving gwia from netware to linux

    Recently moved our gwia that handles internet email from Netware to Sles
    11 GW8.0.3 hp3. Email is moving in and out ok, but I'm getting some
    really weird strangeness with Junkmail settings. Just like the old
    gwia, this gwia has it's own domain/mta. Postoffices are under
    different domains/mta's.
    1. Email flagged with "x-spam-flag: yes" is no longer automatically
    being moved to the junkmail folder. Yes the box is checked for this
    particular's gwia settings, and I've even uncommented it in the gwia.cfg
    file to to be sure it's enabled.
    2. With the "view" column enabled in the client I can see that normal
    email coming in gets set with the tag "internet" Email coming in with
    "x-spam-flag: yes" in the header gets set with the tag "IPM.Novell.ND"
    If I right click on one these to try to manually set it as junkmail, I
    get a message that the message is "Not Eligible for Junk Mail Handling"
    and when I click on that a window pops up saying "This is a POP message.
    Only internet mail sent to your Groupwise account is eligible for Junk
    Mail Handling"
    For whatever reason instead of moving the email to the junkmail folder
    when the x-spam-flag is set, it changes it to type IPM.Novell.ND and
    then the client thinks that it's some sort of POP message instead of an
    internet email. If I redirect incoming email back through the old
    Netware gwia instead, everything works fine.
    What could possibly be going on?

    Originally Posted by Mike
    Recently moved our gwia that handles internet email from Netware to Sles
    11 GW8.0.3 hp3. Email is moving in and out ok, but I'm getting some
    really weird strangeness with Junkmail settings. Just like the old
    gwia, this gwia has it's own domain/mta. Postoffices are under
    different domains/mta's.
    Did you create a new Gateway ( gwia ) object? Or recycle the old one ( which is usually a huge no-no. ) I suspect you created a new one, as you refer to the old NetWare GWIA. But you never know.
    Originally Posted by Mike
    1. Email flagged with "x-spam-flag: yes" is no longer automatically
    being moved to the junkmail folder. Yes the box is checked for this
    particular's gwia settings, and I've even uncommented it in the gwia.cfg
    file to to be sure it's enabled.
    Its only enabled if the run-time config says it is. ;-) Look at the settings listed in the HTTP console for the GWIA or the GWIA logs, which dumps the settings actually being used. You may find the setting is not really effective. Check for differences between the two GWIAs effective config.... something may stick out.
    In the message properties there is a junk mail handling section, can you give us an example of working / non-working versions?
    Note also:
    Support | Junk mail delivered to Inbox <-- buggy or unexpected behavior
    and
    Novell Doc: GroupWise 8 Administration Guide - Blocking Unwanted E-Mail from the Internet <-- xspam.cfg
    -- Bob

  • Problem with LDAP authentication for users in a group

    I've gone through several forums attempting to find a solution, but I still can't get authentication to work for users in a particular group within AD. Our ASA is running 9.1(2), and the domain controller is a Windows Server 2012 R2.
    I can configure the VPN connection, so that all users can authenticate just fine; however, when I setup the group, there appears to be success, but I'm reprompted to authenticate, and it eventually fails:
    [6707]  memberOf: value = CN=VPN Access,OU=COMPANY Groups,DC=COMPANY,DC=com
    [6707]          mapped to IETF-Radius-Class: value = GroupPolicy_COMPANY_SSL_VPN
    [6707]          mapped to LDAP-Class: value = GroupPolicy_COMPANY_SSL_VPN
    [6707]  msNPAllowDialin: value = TRUE
    I'd be grateful if anyone can point me into the right direction and show me what I'm doing wrong. Thank you.
    ldap attribute-map AuthUsers
      map-name  memberOf IETF-Radius-Class
      map-value memberOf "CN=VPN Access,OU=COMPANY Groups,DC=COMPANY,DC=com" GroupPolicy_COMPANY_SSL_VPN
    aaa-server LDAP protocol ldap
    aaa-server LDAP (COMPANY_PROD_INTERNAL) host 10.10.100.110
     ldap-base-dn DC=COMPANY,DC=com
     ldap-scope subtree
     ldap-naming-attribute sAMAccountName
     ldap-login-password *****
     ldap-login-dn CN=LDAPAuth,CN=Users,DC=COMPANY,DC=com
     server-type microsoft
     ldap-attribute-map AuthUsers
    group-policy NOACCESS internal
    group-policy NOACCESS attributes
     vpn-simultaneous-logins 0
     vpn-tunnel-protocol ikev1 ssl-client ssl-clientless
     webvpn
      anyconnect ask none default anyconnect
    group-policy GroupPolicy_COMPANY_SSL_VPN internal
    group-policy GroupPolicy_COMPANY_SSL_VPN attributes
     wins-server none
     dns-server value 10.10.100.102
     vpn-tunnel-protocol ikev1 ikev2 ssl-client
     split-tunnel-policy tunnelspecified
     split-tunnel-network-list value SPLIT-TUNNEL
     default-domain value net.COMPANY.com
     webvpn
      anyconnect profiles value COMPANY_SSL_VPN_client_profile type user
    tunnel-group COMPANY_SSL_VPN type remote-access
    tunnel-group COMPANY_SSL_VPN general-attributes
     address-pool COMPANY-SSL-VPN-POOL
     authentication-server-group LDAP
     authorization-server-group LDAP
     authorization-server-group (COMPANY_PROD_INTERNAL) LDAP
     default-group-policy NOACCESS
     authorization-required
    tunnel-group COMPANY_SSL_VPN webvpn-attributes
     group-alias COMPANY_SSL_VPN enable
    tunnel-group COMPANY_SSL_VPN ipsec-attributes
     ikev1 pre-shared-key *****

    I just figured it out. Under "group-policy GroupPolicy_COMPANY_SSL_VPN attributes", I had to add "vpn-simultaneous-logins 15". Apparently, it was using the value "vpn-simultaneous-logins 0" under the NOACCESS group policy.

  • Problems with IMAQ Vision after upgrading from Labview 6i to Labview 6.1

    Hi,
    We just upgraded from Labview 6i to 6.1.To do this,we uninstalled the 6i version as was suggested by NI and then installed the 6.1 version.Later when we tried to run the old vi's written using Imaq vision, we ran into different problems.Has anyone experienced any similar problems with IMaq vision after upgrading?If so please help me solve this issue.
    Thanx
    deepak

    What kind of problems?
    I would strongly suggest that you uninstall IMAQ (all elements) and reinstall them. They register with Windows, probably docked to 6i, and also must be recompiled, which I believe is done in installation.
    This is your best bet.
    If you still have problems, contact NI and ni.com/ask and start a support inquiry.

  • Problem with Tabbing Order in LiveCycle

    I have a two page form.  The last field on the second page is an image field (the user can attach a graphic).  The problem is it won't tab back to the first page after this field.

    I, too, am having problems with tab order.
    I have a two-page form created in LiveCycle Designer. There are 66 fields on the 1st page of the form, and 65 fields on page 2. When I use Window > Tab order to examine the tab order, all is as it should be (except for one thing, discussed later). However, when I go into the Preview PDF tab (or load the form in Acrobat X Pro), field 4 on page 1 tabs to field 42 (on page 1). Additionally, tabbing from field 41 on page 1 takes me to field 43 on page 2.
    I can use Action Builder to ensure that the tab goes to the appropriate field, but that seems a rather kludgy way to go about it.
    And that additional problem: I've got three text fields on page 1 that are of type Protected. According to the documentation, "The protected field is not included in the tabbing sequence and it does not generate events.", yet all three fields are in the tab order.
    What (if anything) am I doing wrong?
    Thanks.

  • Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

    There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
    I can not believe that Apple did not test this for major bugs like this one is.
    I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
    I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • Problem with Time Capsule after upgrading to firmware 7.6.1

    I am currently using Time Capsule Firmware 7.6 and just upgraded to 7.6.1. After the upgrade, my IPad 2 cannot access iTune, App Store and Safari cannot access any web-site. Email and other Apps which require Internet access have no problem with connection. My other Apple devices like iPhone and Mac Pro have no problem with Internet access and can access App Store, and Safari can access web site as normal.
    I tried to downgrade the Firmware back to 7.6. After the downgrade, iPad 2 can now access iTune and App Store. However, Internet access via Ipad 2 is very slow, at only 1M download and 0.2M upload Internet speed. The same issue occur with my other iPad 1 too. When I check Internet speed on iPhone 4 and Mac Pro, the result is normal, at 25M download internet speed.
    Please let me know how I can resolve this problem.

    I just read other discussion treads on Time Capsule Firmware upgrade to 7.6.1. It seems the whole community is having the same issue ie slow Internet connection speed and even some users are reporting unstable connection. If Apple is reading these treads, Apple should do something to either stop allowing the Firmware upgrade to 7.6.1 or rectify the issue with another Firmware upgrade without this problem.
    If Apple has read and is not taking any action, then, we all should question what exactly is the management hired for?

  • Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

    Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
    I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
    I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
    my new house is expansive so i wanted the extended range and airplay in each room.
    This is not told to customers, and utility doesnt show any issues.
    I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
    Any advice ?
    LJx
    Message was edited by: LJLDN
    Message was edited by: LJLDN

    Sorry couldn't change the detonations to Airport and am new so cant delete!

  • Problem while loading security information (users/roles) from repository

    Iview have stopped connecting to our MDM, All repositories, all IViews Very strange
    Here is what I see in the logs.... Any ideas? Please if you have seen this before only
    Marty
    com.sap.mdm.extension.MetadataException: Problem while loading security information (users/roles) from repository 'PORTAL_CUSTOMERS'
    at com.sap.mdm.extension.MetadataManager.loadRoleCache(MetadataManager.java:559)
    at com.sap.mdm.extension.MetadataManager.internalGetRoleSet(MetadataManager.java:502)
    at com.sap.mdm.extension.MetadataManager.getRoleSet(MetadataManager.java:471)
    at com.sap.mdm.extension.MetadataManager.createMetadataKey(MetadataManager.java:464)
    at com.sap.mdm.extension.MetadataManager.getRepositorySchema(MetadataManager.java:197)
    at com.sap.mdm.uwl.MdmUwlConnector.createUserSessionContext(MdmUwlConnector.java:1463)
    at com.sap.mdm.uwl.MdmUwlConnector.new_retrieveItems(MdmUwlConnector.java:546)
    at com.sap.mdm.uwl.MdmUwlConnector.getItems(MdmUwlConnector.java:129)
    Caused by: com.sap.mdm.commands.CommandException: com.sap.mdm.net.ConnectionException: java.io.IOException: Unexpected socket read.  Result is -1.
    at com.sap.mdm.security.commands.GetUserListCommand.execute(GetUserListCommand.java:72)
    at com.sap.mdm.extension.MetadataManager.loadRoleCache(MetadataManager.java:526)
    Caused by: com.sap.mdm.net.ConnectionException: java.io.IOException: Unexpected socket read.  Result is -1.
    at com.sap.mdm.internal.protocol.manual.AbstractProtocolCommand.execute(AbstractProtocolCommand.java:102)
    at com.sap.mdm.security.commands.GetUserListCommand.execute(GetUserListCommand.java:69)
    at com.sap.mdm.internal.net.DataSocket.receiveData(DataSocket.java:62)
    at com.sap.mdm.internal.net.ConnectionImpl.readInt(ConnectionImpl.java:497)
    at com.sap.mdm.internal.net.ConnectionImpl.readInt(ConnectionImpl.java:490)
    at com.sap.mdm.internal.net.ConnectionImpl.nextMessage(ConnectionImpl.java:629)
    at com.sap.mdm.internal.net.ConnectionImpl.receiveMessage(ConnectionImpl.java:572)
    at com.sap.mdm.internal.net.ConnectionImpl.send(ConnectionImpl.java:233)
    at com.sap.mdm.internal.protocol.manual.AbstractProtocolCommand.execute(AbstractProtocolCommand.java:99)
    com.sap.mdm.commands.CommandException: com.sap.mdm.net.ConnectionException: java.net.SocketException: There is no process to read data written to a pipe.

    Early this month we upgraded the MDM server to:
    MDM Server version: 5.5.63.57
    And the portal components:
    MDM 5.5 SP06 Technology Patch 3 (Build 5.5.63.57)
    MDM 5.5 SP06 Application Patch 3 (Build 5.5.63.57)
    MDM 5.5 SP06 Java API Patch 3 (Build 5.5.63.57)
    However the issue just began 2 days ago?
    We started intgrating MDM Workflow with UWL and assigned Roles and Iviews to the Universal Worklist Configuration
    It seems the Iviews work for a while and then after some time everything gives up? Very confounding
    And yes we are using standard Iviews (search, Result and detail)
    Thanks
    Edited by: Marty Monroe on Oct 31, 2008 3:07 PM

  • The ios8 update is causing innumerable problems with my ipad. The info from my calendar just disappeared, I am typing blind with the keyboard most of the time, and I cannot upload pics or paste to FB. When will this be fixed and what can I do in the

    The ios8 update is causing innumerable problems with my ipad. The info from my calendar just disappeared, I am typing blind with the keyboard most of the time, and I cannot upload pics or paste to FB. When will this be fixed and what can I do in the Meantime?

    Have you tried yesterday's update to iOS8.0.2?
    iOS 8.0.2
    This release contains improvements and bug fixes, including:
      •  Fixes an issue in iOS 8.0.1 that impacted cellular network connectivity and Touch ID on iPhone 6 and iPhone 6 Plus
      •  Fixes a bug so HealthKit apps can now be made available on the App Store
      •  Addresses an issue where 3rd party keyboards could become deselected when a user enters their passcode
      •  Fixes an issue that prevented some apps from accessing photos from the Photo Library
      •  Improves the reliability of the Reachability feature on iPhone 6 and iPhone 6 Plus
      •  Fixes an issue that could cause unexpected cellular data usage when receiving SMS/MMS messages
      •  Better support of Ask To Buy for Family Sharing for In-App Purchases
      •  Fixes an issue where ringtones were sometimes not restored from iCloud backups
      •  Fixes a bug that prevented uploading photos and videos from Safari
    For information on the security content of this update, please visit this website:
      http://support.apple.com/kb/HT1222

  • Problem with Time Capsule after backup session

    I have a problem with Time Capsule after a backup session. Our two Macs (on Maverick) loose connection with the station and the only thing that seems to help is unplugging the Time Capsule  and starting it again! After the next backup session the same thing happens again. The Macs seem not to be able to hold on to the connection and continually loose it.  The iPhones and iPads that we have (4 units) are not affected - it is the Mac Mini and Mac Powerbook that experiences this problem!
    I would be grateful for your help!
    Thor

    This is standard Mac issues and has been a bug floating around since Lion.. it hits some people worse than others.. but once it starts it is awful hard to get rid of.
    Just to confirm the connection to internet is not a problem?? Just the hard disk drops out?
    I recommend you
    1. Reset the TC to factory.. and start over with all new names.. short, no spaces pure alphanumeric.
    TC name and wireless name/s should conform. By default the disk share name is data which is fine.
    2. Mavericks has changed over from using AFP to SMB for network filesharing.. why Apple why??
    This is unhelpful to say the least. Many many people are struggling with TC and being unable to mount the network drive.
    So do it manually and force it back to AFP.
    In Finder use top menu, Go, Connect to Server.
    Type AFP://TCname or TCIPaddress (it must be the network name of actual TC.. or its IP address)
    When the computer locates the resource it will ask for a password.. it is public by default.. supply your password or public and save it in the keychain.
    3. Delete the existing TM setup and start over.. See A4 here. http://pondini.org/TM/Troubleshooting.html
    I cannot promise this will fix it but should reduce the problem to now and then.. rather than every time TM needs to backup.

  • HT204490 OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update.  Have there been problems associated with this update ?

    OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update.  Have there been problems associated with this update ?

    I've been using it on all of my computer without any problems. Remember you won't see any positive comments here. Everyone here is complaining about a problem. If you want a good experience with any upgrade or update first make a backup from which you can boot the computer. If you are installing an update, like 10.10.3 for example, always download and install the Combo Updater - OS X Yosemite 10.10.3 Combo Update. Before you install any update or upgrade over an existing system you should do this:Repair the Hard Drive and Permissions:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu. Select Restart from the Apple menu.

  • Office Web Apps Server 2013 - Word Web App - Problem with Tab space

    Hello We have Office Web Apps Server 2013 running with SharePoint 2013.  Users Editing a Word document with Office Web Apps, can't use "Tabs", any Word document with Tabs; the tabs are replaced with a single space.
    Has anyone noticed this?  Is this a bug?
    -thanks
    thomas
    -Tom

    Yes, currently the Word Web App does not support
    Tab Keyboard shortcut for editing document content .
    For more information, you can have a look at
    the article:
    http://office.microsoft.com/en-us/office-online-help/keyboard-shortcuts-in-word-online-HA010378332.aspx?CTT=5&origin=HA010380212
    http://social.technet.microsoft.com/Forums/en-US/3f5978d3-67a1-4c8c-981f-32493d72610b/office-web-apps-server-2013-word-web-app-problem-with-tab-space?forum=sharepointgeneral

  • Problem with shares on Windows 2003R2 server from a Windows 8.1 PC

    I'm having problem with shares on Windows 2003R2 server from a Windows 8.1 PC.  It times out when I try to copy a file from my PC to the server and I get an error message saying "There is a problem accessing network drive W:\. Make sure you are
    connected to the network and try again."
    I have no problem copying files from the server to the PC.
    Any ideas?

    Hi,
    How about your problem now? Have you test other machine also installed Windows 8.1? Did they have this problem?
    To diagnose this problem, firstly, please check Windows 2003R2 firewall settings, also can disable firewall temporarilly for test.
    Secondly, try to use Network Monitor to capture network communication package for test.
    Network Monitor:
    http://www.microsoft.com/en-us/download/details.aspx?id=4865
    Roger Lu
    TechNet Community Support

Maybe you are looking for