Problem with tab strip in report programing

hi,
I have coded 4 tab strips in a report program.Each tab has some obligatory fields.
My requirement is user must fill all obligatory fields.
suppose if I enter values only one tab and execute , its not asking the obligatory fields in other tabs.may be this is the behaviour of tab strips.
To check the obligatory fields,I wrote cheks in at selection screen with error message.In this case, suppose I didnt enter values in 2nd tab, the error message is coming under 1st tab screen and I am not able to select the 2nd tab.
Can any body tells me how to overcome this issu.
pavan meda

Hi,
Check this example..
Basically you have to check the sy-ucomm not equal to the tab button function code (marked in bold)....
Note: The only thing is I have to press the second button twice to get to the second tab..But it works..
SELECTION-SCREEN BEGIN OF TABBED BLOCK tb1 FOR 10 LINES.
SELECTION-SCREEN TAB (30) tab1 USER-COMMAND tab1 DEFAULT SCREEN 1001.
SELECTION-SCREEN TAB (30) tab2 USER-COMMAND tab2 DEFAULT SCREEN 1002.
SELECTION-SCREEN END OF BLOCK tb1.
SELECTION-SCREEN BEGIN OF SCREEN 1001 AS SUBSCREEN.
PARAMETERS: p_1 TYPE matnr.
SELECTION-SCREEN END OF SCREEN 1001.
SELECTION-SCREEN BEGIN OF SCREEN 1002 AS SUBSCREEN.
PARAMETERS: p_2 TYPE kunnr.
SELECTION-SCREEN END OF SCREEN 1002.
INITIALIZATION.
tab1 = 'Material'.
tab2 = 'Customer'.
AT SELECTION-SCREEN.
 CHECK sy-ucomm <> 'TAB1' AND sy-ucomm <> 'TAB2'.
IF p_1 IS INITIAL.
MESSAGE e000 WITH 'Required entry'.
ENDIF.
IF p_2 IS INITIAL.
MESSAGE e000 WITH 'Required entry'.
ENDIF.
START-OF-SELECTION.
WRITE: / p_1.
WRITE: / p_2.
Thanks,
Naren

Similar Messages

Problem WIth Variant in a report program

I have a z report program with couple of variants , the problem is the varaints display onlt name of the variant and description when the varaint button is pressed.
The changed by , date etc details are not getting displayed.
Thanks
Arun

Hi Arun,
You will not get those data directly from the program execution screen. If you want to get those details, please check table VARID for that variant or program.
Regards,
Sourav

Problem with Tab Strips

Hi,
I have added a new tab to an existing view containing 5 tabs.
I have 3 transparent containers inside the tab container..
Application built n deployed successfully, but
Now when i click on the new tab which i added, application crashes with following exceptions:-
ClassCastException occurs
rendering exception in grid layout data etc.. in all UI elements on that tab.
Anybody has any idea why this is happening?
pls help me with this. Its urgent.
Regards,
Amey Mogare

These are the exception that Im getting,
the list is pretty long, im giving start of it... Pls let me kno what u tthink ASAP ==>
Exception(java.lang.ClassCastException) during processing a Web Dynpro Application.
TION]
#java.lang.ClassCastException
at com.sap.tc.webdynpro.progmodel.context.Paths.getAttributeInfoFor(Paths.java:202)
at com.sap.tc.webdynpro.clientimpl.html.uielib.standard.uradapter.DropDownByKeyAdapter.setViewAndNodeElement(DropDow
apter.java:247)
at com.sap.tc.webdynpro.clientimpl.html.uielements.adaptmgr.URAdapterManager.getAdapterFor(URAdapterManager.java:231
at com.sap.tc.webdynpro.clientimpl.html.uielements.adaptmgr.URAdapterManager.getAdapterFor(URAdapterManager.java:64)
at com.sap.tc.webdynpro.clientimpl.html.uielib.standard.uradapter.GridLayoutAdapter$Cells.getContent(GridLayoutAdapt
641)
at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.ie6.GridLayoutRenderer.renderGridLayoutCellFragment(Grid
nderer.java:739)
at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.ie6.GridLayoutRenderer.renderGridLayoutRowFragment(GridL
derer.java:388)
at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.ie6.GridLayoutRenderer.renderGridLayoutFragment(GridLayo
er.java:310)
at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.ie6.GridLayoutRenderer.render(GridLayoutRenderer.java:71
at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.AbstractRenderManager.render(AbstractRenderManager.
at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.AbstractRenderManager.render(AbstractRenderManager.
at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.ie6.ScrollContainerRenderer.renderScrollContainerFragmen
ContainerRenderer.java:516)
at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.ie6.ScrollContainerRenderer.render(ScrollContainerRender
61)
at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.AbstractRenderManager.render(AbstractRenderManager.
at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.AbstractRenderManager.render(AbstractRenderManager.
at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.ie6.GridLayoutRenderer.renderGridLayoutCellFragment(Grid
nderer.java:739)
at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.ie6.GridLayoutRenderer.renderGridLayoutRowFragment(GridL
derer.java:388)

Call report selection screen in module pool program with tab strip control

Hi,
Could anyone explain in detail to call report selection screen in module pool program with tab strip control.
Thanks
Mano

Hi,
Refer std program:
demo_sel_screen_in_tabstrip.
demo_sel_screen_with_tabstrip.
Call your program with SUBMIT stmt form module program.
Reward points if this Helps.
Manish

Problem in Tab strip

Hello all,
I am facing problem in Tab strip where imy second tab is automatically getting in active position once after saving data in the first tab through save button in pf-status.

Hi dear
You can try this Take a Strig type attribute in context
goto the tabstrip properties there in option "SELECTED TAB" bind it with that string attribute
and provide the value of that attribute as the name of first tab of tabstrip
mine thing worked properly
please try the provided link too.
http://help.sap.com/saphelp_erp2005/helpdata/EN/e8/ac884118aa1709e10000000a155106/content.htm
Edited by: AMARENDRA on Nov 30, 2011 11:50 AM

Office Web Apps Server 2013 - Word Web App - Problem with Tab space

Hello We have Office Web Apps Server 2013 running with SharePoint 2013. Users Editing a Word document with Office Web Apps, can't use "Tabs", any Word document with Tabs; the tabs are replaced with a single space.
Has anyone noticed this? Is this a bug?
-thanks
thomas
-Tom

Yes, currently the Word Web App does not support
Tab Keyboard shortcut for editing document content .
For more information, you can have a look at
the article:
http://office.microsoft.com/en-us/office-online-help/keyboard-shortcuts-in-word-online-HA010378332.aspx?CTT=5&origin=HA010380212
http://social.technet.microsoft.com/Forums/en-US/3f5978d3-67a1-4c8c-981f-32493d72610b/office-web-apps-server-2013-word-web-app-problem-with-tab-space?forum=sharepointgeneral

Problems with a simple stop watch program

I would appreciate help sorting out a problem with a simple stop watch program. The problem is that it throws up inappropriate values. For example, the first time I ran it today it showed the best time at 19 seconds before the actual time had reached 2 seconds. I restarted the program and it ran correctly until about the thirtieth time I started it again when it was going okay until the display suddenly changed to something like '-50:31:30:50-'. I don't have screenshot because I had twenty thirteen year olds suddenly yelling at me that it was wrong. I clicked 'Stop' and then 'Start' again and it ran correctly.
I have posted the whole code (minus the GUI section) because I want you to see that the program is very, very simple. I can't see where it could go wrong. I would appreciate any hints.
public class StopWatch extends javax.swing.JFrame implements Runnable {
 int startTime, stopTime, totalTime, bestTime;
 private volatile Thread myThread = null;
 /** Creates new form StopWatch */
 public StopWatch() {
 startTime = 0;
 stopTime = 0;
 totalTime = 0;
 bestTime = 0;
 initComponents();
 public void run() {
 Thread thisThread = Thread.currentThread();
 while(myThread == thisThread) {
 try {
 Thread.sleep(100);
 getEnd();
 } catch (InterruptedException e) {}
 public void start() {
 if(myThread == null) {
 myThread = new Thread(this);
 myThread.start();
 public void getStart() {
 Calendar now = Calendar.getInstance();
 startTime = (now.get(Calendar.MINUTE) * 60) + now.get(Calendar.SECOND);
 public void getEnd() {
 Calendar now1 = Calendar.getInstance();
 stopTime = (now1.get(Calendar.MINUTE) * 60) + now1.get(Calendar.SECOND);
 totalTime = stopTime - startTime;
 setLabel();
 if(bestTime < totalTime) bestTime = totalTime;
 public void setLabel() {
 if((totalTime % 60) < 10) {
 jLabel1.setText(""+totalTime/60+ ":0"+(totalTime % 60));
 } else {
 jLabel1.setText(""+totalTime/60 + ":"+(totalTime % 60));
 if((bestTime % 60) < 10) {
 jLabel3.setText(""+bestTime/60+ ":0"+(bestTime % 60));
 } else {
 jLabel3.setText(""+bestTime/60 + ":"+(bestTime % 60));
 private void ButtonClicked(java.awt.event.ActionEvent evt) {
 JButton temp = (JButton) evt.getSource();
 if(temp.equals(jButton1)) {
 start();
 getStart();
 if(temp.equals(jButton2)) {
 getEnd();
 myThread = null;
 * @param args the command line arguments
 public static void main(String args[]) {
 java.awt.EventQueue.invokeLater(new Runnable() {
 public void run() {
 new StopWatch().setVisible(true);
 // Variables declaration - do not modify
 private javax.swing.JButton jButton1;
 private javax.swing.JButton jButton2;
 private javax.swing.JLabel jLabel1;
 private javax.swing.JLabel jLabel2;
 private javax.swing.JLabel jLabel3;
 private javax.swing.JPanel jPanel1;
 // End of variables declaration
}

Although I appreciate this information, it still doesn't actually solve the problem. I can't see an error in the logic (or the code). The fact that the formatting works most of the time suggests that the problem does not lie there. As well, I use the same basic code for other time related displays e.g. countdown timers where the user sets a maximum time and the computer stops when zero is reached. I haven't had an error is these programs.
For me, it is such a simple program and the room for errors seem small. I am guessing that I have misunderstood something about dates, but I obviously don't know.
Again, thank you for taking the time to look at the problem and post a reply.

Problem with Tabbing Order in LiveCycle

I have a two page form. The last field on the second page is an image field (the user can attach a graphic). The problem is it won't tab back to the first page after this field.

I, too, am having problems with tab order.
I have a two-page form created in LiveCycle Designer. There are 66 fields on the 1st page of the form, and 65 fields on page 2. When I use Window > Tab order to examine the tab order, all is as it should be (except for one thing, discussed later). However, when I go into the Preview PDF tab (or load the form in Acrobat X Pro), field 4 on page 1 tabs to field 42 (on page 1). Additionally, tabbing from field 41 on page 1 takes me to field 43 on page 2.
I can use Action Builder to ensure that the tab goes to the appropriate field, but that seems a rather kludgy way to go about it.
And that additional problem: I've got three text fields on page 1 that are of type Protected. According to the documentation, "The protected field is not included in the tabbing sequence and it does not generate events.", yet all three fields are in the tab order.
What (if anything) am I doing wrong?
Thanks.

Problem with tabbed panel

I have a problem with tabbed panel...this panel has 3 columns, I copied to each of them a diffrent text (diffrent height)...I expected to obtain diffrent working area of column, for example 1st column-height 7500 px, 2nd-1500 px, 3rd-2500 px, but I received one height 7500 px, each column has been formatted to this size....below a text I have “empty space”- (it is a diffrence between working area and text area)...I put the text to the 1st column for example 7200 px height, empty space below this text is 300 px I received 7500 px of working area in this column, here the problem doesn`t exist but….2nd column i have height of text for example 1300 px, below this text i have 6200 px empty space...It should be height 1300 px of text and maybe 200 px of empty space...so the working area could have at 1500 px not 7500 px of height....I try to change it (to for example 1500 px) but it still return to the basic 7500 px height and can`t do it...The solution is to use another form like. the accordion form..but it is a row form….when you put a diffrent sized text (height) you will receive diffrent size of working area (height), you obtain 7200px text +300 px empty space=7500 working area in 1st row.. 1200 px text + 300 px empty space=1500 workin area px in 2nd row and 2500 working area px in 3rd row…everything is fine in this form…each row has been formatted to the different size of height…but I prefer to use a tabbed panel (column form) instead a accordion form.…I don`t to waste the time to correct the code in html text editor like PSPad…
Best Regards
Kamil

A couple of threads here that should answer your query.
http://forums.adobe.com/message/5080345
http://forums.adobe.com/message/5104253
Thanks,
Vinayak

How to keep the field open for input with error message in report program

Hi,
Need a help in solving the below issue.
"How to keep the field open for input with error message in report program"
Regards,
C.Shasiraj.

Hi...
you have to use the event:
AT SELECTION-SCREEN ON <FIELD> EVENT.
u have to give an error message in this event.
Consider the following Example:
PARAMETERS : NUMBER TYPE I.
AT SELECTION-SCREEN ON NUMBER.
IF NUMBER = 10.
MESSAGE 'Number vakue is 10' TYPE 'E'.
ENDIF.
START-OF-SELECTION.
WRITE NUMBER.

in this if u give the value of number = 10, it will not proceed further, if u give some other value other than 10 you will proceed further...
Execute this program once u will understand....
also Consider the following links :
Regarding events:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a237d9b511d1950e0000e8353423/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a23ad9b511d1950e0000e8353423/frameset.htm
Regarding messages:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
This is very useful.......
Reward points if useful....
Suresh....

HT204152 hello i have a problem with app store cant download program get this error verification required and no accept my visa card

hello i have a problem with app store cant download program get this error verification required and no accept my visa card

what i can start to download and updated programs

Why is itunes saying "there is a problem with this installer package. a program required for this install to complete could not be run. contact your support personnel or package vendor."

why is itunes saying "there is a problem with this installer package. a program required for this install to complete could not be run. contact your support personnel or package vendor."

Go to START > ALL PROGRAMS > Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you can't find ASU, go to Control Panel:
XP - Add n Remove Programs
Win7/Vista - Programs n Features
Highlight ASU, click change then Repair.

Help me, I have a problem with font when export report to PDF?

Hi everyone! Help me
I have a problem with font when export report to PDF
My report uses template .rtf with font Times New Roman (Unicode), language is VietNamese.
when desige template no problem, error only happen when view report by PDF.
Edited by: user10236405 on Oct 15, 2008 11:23 PM

give it time to boot. the time depends on yr memory size n data. soon a process bar will appear indicating the boot process. if still this doesnt work. try formating the phone. but this ways u lose all data on the phone (unless u backed it). relax! the data on the memory card is safe.

Problem with tabs in xml text

I have a problem with my XML setup here
i use Tab key to aligh up info in the xml text for aligned
display in the program
hoever i tested on several computers and get different
resolts.
how can i fix this.
Please view the linked Image
http://img129.imageshack.us/img129/8394/flashtextproblemti4.jpg
this is what happenes even thow all run xp and all run same
latest flash version.
Anyone got an ideer how i can solve this.
BTW the font is verdana.
This is my actionscript ....
// Function to parse an address
f_parseAddress = function () {
// Set the text
_root.stageholder.textfield.htmlText =
this.firstChild.firstChild.firstChild.nodeValue;
// Create the XML object
XML_address = new XML();
// Set up the XML object
XML_address.ignoreWhite = true;
// Add the handlers
XML_address.onLoad = f_parseAddress;
// Load the XML file
XML_address.load("./Data/xml/kontakt.xml");
This is my XML file
<?xml version="1.0" encoding="iso-8859-1"?>
<text>
<address>
<![CDATA[
Company name
Company name
address
address
Dir. tlf. + xx xx xx xx xx
+ xx xx xx xx xx
Mobil + xx xx xx xx xx
+ xx xx xx xx xx
web: <a href="
http://www.xxxxxxxxxxxxx.xx">www.xxxxxxxxxxxxx.xx</a>
E-mail: <a
href="mailto:[email protected]">[email protected]</a>
]]>
</address>
</text>
If anyone got a solution on how i can get my text to allign
corect
i would like to hear about it
Best reguards
Mis

alrighty then try this xml structure.
Note: formatting information like b, or linkage tags should
not be part of the xml.
The XML format is a universal format for data, if you fill it
with style information this is not good practive (in general, there
are of course scenarios where it makes sense, also since (x)html IS
also XML).
In your case you want to put the information about multiple
companies in a xml file, but you let the flash decide how to
display format this information.
so if you use the sugested XMl structure you will have full
control of the layout within flash, because you can grab every
piece of information from the xml and place it jsut where you want
in flash and format it within flash.
Of course this process is more coding work than your previous
attempt, but it pays of when you have a lot of data to process and
when you want to have full control of the final layout.
But maybe its overkill for your application (I don't know how
many companies will be stored in your xml and how complex the rest
of the app is).

How to code with tab strip control in se38

HI masters,
In SE38 i created tab strips with 4 tabs in selection screen. Each selection screen having 4 or 5 input fields.So whenever user click on first screen he will fill the input on that screen, and based on that fields only he will get information. Each tab is totally differ from other tabs, i mean first tab is orders and second is invoice like that. so there is no connection betwen tabs data. Everything is individual tabs.
I dont know how to code that.Can you plz help me how to code that? Thanks in advance.Its very urgent.

To create a tabstrip control area, choose Tabstrip control from the object list in the Screen Painter and
place it on the screen. Fix the top-left hand corner of the table control area, and then drag the object to
the required size.
Assign a name to the tabstrip control in the Object name attribute. You need this name to identify your
tabstrip control.
In your ABAP program use the CONTROLS statement to declare an object with the same name. Use
TABSTRIP as the type.
The type TABSTRIP is defined in the type pool CXTAB. The field ACTIVETAB contains the function
code of the tab title of the currently active tabstrip. The other fields are reserved for internal use.
The default number of tab pages for a tabstrip control is two.
Technically, tab titles are treated in the same way as pushbuttons. They have a name, a text, a function
code, and a function type. You enter these in the Name, Text, FctCode and FctType fields of the object
attributes.
A tab title can have the function type ' ' (space) or 'P'. If the function type is ' ' (space), the PAI
processing block is triggered when the user chooses that tab, and the function code of the tab title is
placed in the command field. If the function type is 'P', the user can scroll between different tab pages of
the same type without triggering the PAI processing block. For further details, see the following pages.
If you want your tabstrip control to have more than two pages, you must create further tab titles. To do
this, choose Pushbutton from the object list in the Screen Painter and place it in the tab title area.
You must assign a subscreen area to each tab page.
The subscreen area assigned to a tab page is automatically entered as the Reference object (in the
Dictionary attributes) for the tab title of that page.
To assign a subscreen area to one or more tab pages, choose the relevant tab title in the fullscreen
editor, choose the Subscreen object, and place it on the tab page.
Alternatively, you can assign a single subscreen area to several tab pages by entering the name of the
subscreen area directly in the Reference object field of the attributes of the relevant tab pages.
If you have assigned a different subscreen area to each page element in a tabstrip control, you can
scroll between the pages locally at the front end.
To do this, you must send all of the subscreens to the front end when you send the main screen itself. All
of the tab titles in the tabstrip control must also have function type 'P'.
Now, when you scroll between the different page elements, there is no communication between the
presentation server and the application server.
When the user chooses a function on the screen that triggers PAI processing, the system processes the
PAI blocks of all of the subscreens as well. This means that all of the field checks are run. In this
respect, you could regard the tabstrip control as behaving like a single large screen.
Local scrolling in tabstrip controls is more appropriate for display transactions.
Screen Painter:
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN subarea1
INCLUDING SY-CPROG '0101'.
CALL SUBSCREEN subarea2
INCLUDING SY-CPROG '0102'.
CALL SUBSCREEN subarea3
INCLUDING SY-CPROG '0103'.
PROCESS AFTER INPUT.
CALL SUBSCREEN subarea1.
CALL SUBSCREEN subarea2.
CALL SUBSCREEN subarea3.
ABAP:
CONTROLS: my_tab_strip TYPE TABSTRIP.
To program a tabstrip control to scroll locally at the front end, you must:
Assign
a separate subscreen area to each tab page; a subscreen will be sent to each of these
when the screen is processed.
Call
all of the subscreens from the flow logic.
Assign
function code type 'P' to all of the tab titles.
The system hides any page element whose subscreen contains no elements that can be displayed.
If there are no page elements containing elements that can be displayed, the system hides the entire
tabstrip control.
Hope this is helpful, Do reward.

Problem with tab strip in report programing

Similar Messages

Maybe you are looking for