Problem with Tab to Next Field

If I recall correctly, in the past when I wanted to print specific pages from a document, I tabbed once to get from the number of copies field to the field next to "from" to indicate the first page I wanted printed, then tabbed again and entered the last page I wanted to print.
I am finding that when I open the print dialog, it is starts with the "Printer" drop down menu highlights. If I tab, it next goes to the "Presets". The next tab sends it to the "All" radio button. If I tab yet again, I finally get to the field to enter the "from" field to enter the first page I want printed. Instead of one Tab to get to the "from" field, I have to Tab 3 times.
I am finding this same type of behavior in other programs as well. It used to be, if I recall correctly, that tabbing to the next field only selected those fields in which a numeric value could be entered from the keyboard. Now every button and dropdown menu seems to selected as I am tabbing.
When I compose an email, I used to be able to start composing the email after tabbing from the subject field. Now, after I tab from the subject field, the next stop is the drop down menu to select which header fields are visible. Tabbing again brings me to the "From" drop down menu. The next tab is the "Signature" drop down menu. Tabbing again brings me to the priority drop down menu. After the 5th press of the tab key, I finally get to the field that allows me to type my email content. The four presses of the tab key really slow things down.
These extra presses of the tab key are a royal pain. I am finding that I am using the mouse to go directly from one field to the next.
Has anyone else had this experience? Is there a preference to go back to the way it used to work?

This is planned to be fixed in the next release.

Similar Messages

Problem with flow of expandable fields

Hi everyone,
I have important problem with flow of expandable fields in table in dynamic PDF form. The issue I am talking about you can see at the top of column 3 on page 2 in PDF in link below.
Here is uploaded PDF form and sample XML data (form has import button and is ReaderExtended that you can easily test it and see my problem):
http://www.speedyshare.com/718224676.html
Generally I have created table with 3 columns using Table object (each field has allow multiple lines selected and expand to fit). It is closed in FormBody subform which is flowed subform.
Row in table is repeatable and has “is allow to break page” setting set on.
Sometimes when there is a lot of text and row page break there is problem with flow.
For example text from one rows overlaps on text from next row.
I tried to solve this problem by changing row height, indents, font size, line spacing but always when I thought that I have fixed it I got another data which generated the same flow problem.
Did anyone met this problem earlier and found solution to this issue? This is really important for me and I am really in dead end so any hints would be really helpful.
I am using Adobe Livecycle Designer 8.1 and PDF form target is 8.
I really appreciate any help in this problem.
Thanks,
Kamil Dłutowski

I posted link to my form in my first post.
Here it is: http://www.speedyshare.com/718224676.html

Problem with Tabbing Order in LiveCycle

I have a two page form. The last field on the second page is an image field (the user can attach a graphic). The problem is it won't tab back to the first page after this field.

I, too, am having problems with tab order.
I have a two-page form created in LiveCycle Designer. There are 66 fields on the 1st page of the form, and 65 fields on page 2. When I use Window > Tab order to examine the tab order, all is as it should be (except for one thing, discussed later). However, when I go into the Preview PDF tab (or load the form in Acrobat X Pro), field 4 on page 1 tabs to field 42 (on page 1). Additionally, tabbing from field 41 on page 1 takes me to field 43 on page 2.
I can use Action Builder to ensure that the tab goes to the appropriate field, but that seems a rather kludgy way to go about it.
And that additional problem: I've got three text fields on page 1 that are of type Protected. According to the documentation, "The protected field is not included in the tabbing sequence and it does not generate events.", yet all three fields are in the tab order.
What (if anything) am I doing wrong?
Thanks.

Office Web Apps Server 2013 - Word Web App - Problem with Tab space

Hello We have Office Web Apps Server 2013 running with SharePoint 2013. Users Editing a Word document with Office Web Apps, can't use "Tabs", any Word document with Tabs; the tabs are replaced with a single space.
Has anyone noticed this? Is this a bug?
-thanks
thomas
-Tom

Yes, currently the Word Web App does not support
Tab Keyboard shortcut for editing document content .
For more information, you can have a look at
the article:
http://office.microsoft.com/en-us/office-online-help/keyboard-shortcuts-in-word-online-HA010378332.aspx?CTT=5&origin=HA010380212
http://social.technet.microsoft.com/Forums/en-US/3f5978d3-67a1-4c8c-981f-32493d72610b/office-web-apps-server-2013-word-web-app-problem-with-tab-space?forum=sharepointgeneral

Problem with tabbed panel

I have a problem with tabbed panel...this panel has 3 columns, I copied to each of them a diffrent text (diffrent height)...I expected to obtain diffrent working area of column, for example 1st column-height 7500 px, 2nd-1500 px, 3rd-2500 px, but I received one height 7500 px, each column has been formatted to this size....below a text I have “empty space”- (it is a diffrence between working area and text area)...I put the text to the 1st column for example 7200 px height, empty space below this text is 300 px I received 7500 px of working area in this column, here the problem doesn`t exist but….2nd column i have height of text for example 1300 px, below this text i have 6200 px empty space...It should be height 1300 px of text and maybe 200 px of empty space...so the working area could have at 1500 px not 7500 px of height....I try to change it (to for example 1500 px) but it still return to the basic 7500 px height and can`t do it...The solution is to use another form like. the accordion form..but it is a row form….when you put a diffrent sized text (height) you will receive diffrent size of working area (height), you obtain 7200px text +300 px empty space=7500 working area in 1st row.. 1200 px text + 300 px empty space=1500 workin area px in 2nd row and 2500 working area px in 3rd row…everything is fine in this form…each row has been formatted to the different size of height…but I prefer to use a tabbed panel (column form) instead a accordion form.…I don`t to waste the time to correct the code in html text editor like PSPad…
Best Regards
Kamil

A couple of threads here that should answer your query.
http://forums.adobe.com/message/5080345
http://forums.adobe.com/message/5104253
Thanks,
Vinayak

Adhoc query-Problem with Personnel no output field

Hi Gurus,
We are trying to run an adhoc query using a customized Info set(PNPCE logical database).
While running the query,we had selected Personnel no(from Payroll status P0003 table) as output field and Company code(from Org assignment P0001) as input field in the selection.
Problem is in the output field we are seeing the Personnel name details in place of Personnel no.Could anyone please suggest what could be the reason behind this and how to fix it.
Your help will be highly appreciated.
Warm Rgds
Sushil

Hi Sushil,
The default output for fields with a text and a value (Name = text, PERNR = value) is the text. You can change this by right clicking on the output box in Ad Hoc and selecting "Value". If you want both name and number, select "Value and Text".
You can also change this default to Value from Text if in Ad Hoc, you go to Edit --> Settings. On the last tab, change the radio buttion for output default to Value from Text. This will change it for all fields so you would see the eight digit number rather than the name of the position or org unit. Thus, you may want to keep it at Text and use the right click to change specific fields as needed.
By the way, it is usually best to utilize the personnel number field from IT0000-Actions, although it can be obtained from any infotype if you include that field in the field group when creating your infoset.
Paul

Problem with tabs in xml text

I have a problem with my XML setup here
i use Tab key to aligh up info in the xml text for aligned
display in the program
hoever i tested on several computers and get different
resolts.
how can i fix this.
Please view the linked Image
http://img129.imageshack.us/img129/8394/flashtextproblemti4.jpg
this is what happenes even thow all run xp and all run same
latest flash version.
Anyone got an ideer how i can solve this.
BTW the font is verdana.
This is my actionscript ....
// Function to parse an address
f_parseAddress = function () {
// Set the text
_root.stageholder.textfield.htmlText =
this.firstChild.firstChild.firstChild.nodeValue;
// Create the XML object
XML_address = new XML();
// Set up the XML object
XML_address.ignoreWhite = true;
// Add the handlers
XML_address.onLoad = f_parseAddress;
// Load the XML file
XML_address.load("./Data/xml/kontakt.xml");
This is my XML file
<?xml version="1.0" encoding="iso-8859-1"?>
<text>
<address>
<![CDATA[
Company name
Company name
address
address
Dir. tlf. + xx xx xx xx xx
+ xx xx xx xx xx
Mobil + xx xx xx xx xx
+ xx xx xx xx xx
web: <a href="
http://www.xxxxxxxxxxxxx.xx">www.xxxxxxxxxxxxx.xx</a>
E-mail: <a
href="mailto:[email protected]">[email protected]</a>
]]>
</address>
</text>
If anyone got a solution on how i can get my text to allign
corect
i would like to hear about it
Best reguards
Mis

alrighty then try this xml structure.
Note: formatting information like b, or linkage tags should
not be part of the xml.
The XML format is a universal format for data, if you fill it
with style information this is not good practive (in general, there
are of course scenarios where it makes sense, also since (x)html IS
also XML).
In your case you want to put the information about multiple
companies in a xml file, but you let the flash decide how to
display format this information.
so if you use the sugested XMl structure you will have full
control of the layout within flash, because you can grab every
piece of information from the xml and place it jsut where you want
in flash and format it within flash.
Of course this process is more coding work than your previous
attempt, but it pays of when you have a lot of data to process and
when you want to have full control of the final layout.
But maybe its overkill for your application (I don't know how
many companies will be stored in your xml and how complex the rest
of the app is).

Problem with Math In Calculated Fields

I am calculating a group incident rate for data returned from
a query. The formula is Number of cases multiplied by 200000
divided by number of hours worked. Cases in my report is the
calculated field: calc.CaseSum (the sum of cases for the group)
Hours is calc.SumHours (the sum of hours for the group). The actual
values for these variables (for the first group are 48 and 29427171
respectively. When I create the following calculated field called
rate using the formula: (calc.CaseSum * 200000) / calc.SumHours,
Cold Fusion Generates a Runtime Error:
Invalid ColdFusion expression in report. If the expression is
a string, ensure that it is within quotes. Error: (calc.CaseSum *
200000) / calc.SumHours is not a valid ColdFusion expression.
If I use the constant value "29427171" as the divisor, the
report works albeit only for the first group. Any ideas; is this a
bug, or am I misusing the product?
Addition: I forgot to mention I am using CF8. Also this
formula worked fine as a Report Total before I introduced grouping
and modified the calculated fields to reset on the change of a
group.

Sorry, I've been on another project for awhile. This problem
will certainly be a "show stopper" for me if I cannot resolve it.
As I mentioned in my original post, I used a constant in the
formula in lieu of the variable and the calculation worked. This
would suggest that CF does not have a problem with a large number.
In spite of that reasoning, I tried Tony's suggested (thanks
by the way!) with the identical outcome, only difference is the new
formula is displayed in the error message.
Tony, you also suggested that I set the variables using
CFSET... How would I do this within the report writer environment.
I had tried a similar approach: to perform half the calculation
i.e. that within the parenthesis, and assign that value to a
separate "calculated field: and then perform the rest of the
calculation on that variable with the same outcome.
I think that I may be dealing with a CF bug here, I'd like to
find a workaround... I've noticed that CF8 has a new patch, perhaps
after I apply it, I may be able to get this thing to work. I'm on
another project right now so it will be a few days before I can
test this theory, I report the result.
Should this fail, and no one can come up with a workaround, I
will report this to Adobe.

Import Manager - Problem with 0..n field in Import Manager

Iu2019m having problems with XMLs that contain multiple or single tags in MDIS process. For example: I did the map using a XML with multiple tags for Address:
<address>
<item>
u2026
</item>
<item>
u2026
</item>
</address>
When I send two address or more Address, the Import Server work fine, but when I send only one Address, the address is not imported.
<address>
<item>
</item>
<item>
</item>
</address>
Opening the xml file with only one Address in Import Manager, I saw that the fields isnu2019t mapped, but when I open a xml file with multiple Address itu2019s open correctly.
The XSD cardinality for the Address\Item is 0..n

Hi Evandro ,
If it is processing the input file correctly through the Manul Import manager process then update your latest Map by using SAVE As option or else save this correct map with a new name altogether and use this new map in the port for automatic importing.
If your file is able to process correctly through the Import manager without showing any errors till the Import step in the Import manager then this map must be correct and shoul automate the importing correctly.
Provided you are using the similar file for automatic importing as well.The file name and the fields as well as the value mapping as saved in this corrected map must not differ with the input file else this saved map will not be able to import correctly.
Check to see if you have made correct setting for automatic importing by refering the below link:
http://help.sap.com/saphelp_mdm550/helpdata/en/43/12036df94c3e92e10000000a1553f6/frameset.htm (Automatic importing MDIS - Import manager ref guide>MDM import server(MDIS)>MDIS Consfiguration)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8973bcaf-0801-0010-b7a7-f6af6b1df00e(mdm import and syndication server)
Also check the exception folders if your import is not taking place automatically:
http://help.sap.com/saphelp_mdm550/helpdata/en/43/12036df94c3e92e10000000a1553f6/frameset.htm (Exceptions- MDM Import Manager MDIS-Exception handling)
Hope It Helped
Thanks & Regards
Simona Pinto

Problem with JPA @Embeddable class field in @Embedded

I have a Embeddable class and Embadded in all of my JPA Entities, the version(in DBUniqueId) field is mandatory for some JPA Entities and for others it should not be present.
My DBUser.java JPA Entity shouldn't have version field(DBUser table doesn't have one) and so I didn't include it in @AttributeOverrides of DBUser.java. when I try to run the JPA query it results in exception
Query:
List<DBUser> userList = (List<DBUser>)entityManager.createQuery(SELECT u FROM DBUser u WHERE u.userId.root=?1 AND u.userId.extension=?2).setParameter(1,"root1").setParameter(2,"ext1").getResultList ();
And The Exception is:
---- Begin backtrace for Nested Throwables
java.sql.SQLException: ORA-00904: "T0"."VERSION": invalid identifier
 at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:74)
 at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:131)
How do I inform to JPA Entity to ignore only the version field of the Embeddable in my JPA Entity @Embedded place.
So the above query can successful. Thank You!
Please guide me to solve this problem.
@Embeddable
@MappedSuperclass
public class DBUniqueId implements Serializable {
* serialVersionUID.
private static final long serialVersionUID = 8903598739796209331L;
* root.
private String root;
* extension.
private String extension;
* version.
private String version;
 //Getters & Setters
@Entity
@Table(name = "MyTable", schema = "MySchema")
public class DBUser implements Serializable {
* unique user id.
private DBUniqueId uniqueUserId;
* Get the unique user id.
* @return <code>DBUniqueId</code> - unique person id
@Embedded
@AttributeOverrides( {
@AttributeOverride(name = "root", column = @Column(name = "LUSR02_ID_ROOT", nullable = true, length = 50)),
@AttributeOverride(name = "extension", column = @Column(name = "LUSR02_ID_EXT", nullable = true, length = 50))
public DBUniqueId getUserId () {
return uniqueUserId;
* set user unique id.
* @param uniqueId - unique id of the person
public void setUserId (final DBUniqueId uniqueId) {
this.uniqueUserId = uniqueId;
}

Sudeep Naidu wrote:
Hello gimbal2,
Thanks for your response...
In my project I have created a class with name DBVersionUniqueId but my lead said no to it.
Only DBUniqueId should be used and make it work with or with out version fields.
I tried experimenting around, but didn't succeed.
Please Suggest some solution to make it work with DBUniqueId class.
Thank You.No, let your lead write the code. He/she seems to be the expert. I certainly have no clue how to do it and honestly I also cannot find any reason why it should be possible. Let me put what is required in other words:
- you have an entity with three properties, all of which are not transient. This means these properties map to three columns in the database according to the JPA specs.
- you have a table with only two properties
- you must and you shall use the object with three properties but at the same time one of the fields must all of a sudden be ignored by the persistence provider
It makes no sense to want to do that.
Correct answer: create a new object with only the two fields so the database and the object model match exactly
Wrong answer: try to create workarounds that in six months time nobody is going to understand why the hell it was done that way

Problem with Tab key

Hi all,
I have a swing appication run JDK1.3.1. I try to run on JDK1.4.2 is OK, but TAB key isn't available from this component to other component.
Any suggestion would be appreciated.
Thanks in advance.

Component can JButton, JTextField, JComboBox...
Not at all Dialogs error with tab key, but when open Dialog that is'nt available with tab key then next dialogs is'nt available too althought they available with tab key.

Problem with update of BLOB field in a table with compound primary key

Hi,
I've been developing an application in Application Express 3.1.2.00.02 that includes processing of BLOB data in one of the tables (ZPRAVA). Unfortunately, I've come across a strange behaviour when I tried to update value in a BLOB field for an existing record via a DML form process. Insert of a new record including the BLOB value is OK (the binary file uploads upon submiting the form without any problems). I haven't changed the DML process in any way. The form update process used to work perfectly before I'd included the BLOB field. Since than, I keep on getting this error when trying to update the BLOB field:
ORA-20505: Error in DML: p_rowid=3, p_alt_rowid=ID, p_rowid2=CZ000001, p_alt_rowid2=PR_ID. ORA-01008: not all variables bound
Unable to process row of table ZPRAVA.
OK
Some time ago, I've already created another application where I used similar form that operated on a BLOB field without problems. The only, but maybe very important, difference between both the cases is that the first sucessfull one is based on a table with a standard one-column primary key whereas the second (problematic one) uses a table with compound (composite) two-column PK (two varchar2 fields: ID, PR_ID).
In both cases, I've followed this tutorial: [http://www.oracle.com/technology/obe/apex/apex31nf/apex31blob.htm]).
Can anybody confirm my suspicion that Automatic Row Processing (DML) can be used for updating BLOB fields within tables with only single-column primary keys?
Thanks in advance.
Zdenek

Is there a chance that the bug will be included in the next patch?No, this fix will be in the next full version, 3.2.
Scott

Problem with Tab Key in JFileChooser when Details view is selected.

Hi all,
Iam using a JFileChooser in my application.When i click Details option in the JFileChooser the files with the size,Type and modified date are displayed.
When i am using tab to navigate through the JFileChooser,when the tab enters the area where the files are listed with details,the tab is not comming out of the File List area,instead it is traversing with in the files.How do i come out of the File List area using Tab key.I wanted to make a functionality similar to Windows FileChooser where in if we press Tab it goes to the file list and the next tab focus to Text field and so on.
Is it possible using JFileChooser??
Pls Help me,
Thanks and Regards,
Ravi

Hi,
looking at other threads, I think you will
have to get the button and modify/remove the tool tip
as you which.
this thread might help you, at least the way to get the components in the file
chooser:
http://forum.java.sun.com/thread.jsp?forum=57&thread=563002

Problem with tab-key navigation

I am making chanegs to an existing form.
I have a tab canvas with 3 tabs, each contains a data block, and other data blocks outside of the tab canvas.
I wanted the tab key to move the cursor to the next record so I changed the navigation style from "Change Block" to "Change Record", but it did not help. When the cursor is a on a record of a multi-record block and I tab through the items to the last one, pressing the tab key leads me to another tab-page.
I put in some debug code and noticed that the WHEN-TAB-CHANGED trigger did not fire. The WHEN-VALIDATE-RECORD trigger fired and the cursor block and record number were correct.
After the tab key took me to another tab-page and I navigated back to the original tab-page. Even though it looks like I'm on the correct tab page, SYSTEM.cursor_block was NOT correct, it was pointing to another data block outside of the tab canvas.
I checked other forms on our system and I'm pretty sure that changing the navigation style to "Change Record" would work. Perhaps there's something peculiar about this form.
Any idea will be appreciated.
Thanks.

Found the problem.
For some reason, the WHEN-NEXT-ITEM trigger of the last item of the record is hard-coded to go the another block.

Problem with tab access after user deleted from group

9ias version 9.2.0.1
There seems to be a problem (potential bug???) when deleting a user from a portal group. I have a portal page set up with multiple tabs. These tabs can only be accessed by users belonging to certain portal groups. When i add a user to a group, the user sees the necessary tabs when authenticated. However, if i delete this user from the group there is a problem. When the user re-logs into portal, they will see all the tabs belonging to the group they were deleted from. However, when they select this tab nothing happens and the portal goes into a state of flux (doesn't navigate). One way to resolve this is to go in as a portal admin, edit any tab and select apply. The portal then seems to refresh.
This solution isn't practical. Is this a bug? Is there a patch or another solutions??? Thanks

Hi Turloch! Thanks for your help!
Those SQL Statements were extracted from the MS Access application that we will continue to use to access the data , now on an Oracle Database.
I don't know what I can do to make this kind of statements works as it is on Access database. The first query, that I called Query1 works fine on Oracle, I just mentioned it because the 2nd Query , named Query2, use it.
I'm not able to understand why when I change the 1st. query to a "make-table" query the Query2 works as desired, but if I keep the Query1 and Query2 as it is on the MS Access Application I got the ODBC error message and the ORA-00904 error message , related (I think!) to the FieldTmp field used on the LEFT JOIN statement (AND).
As I told before, if I change the AND clause to compare to another field, as instance, field1 :
FROM Query1 LEFT JOIN Table3
ON (Table3.field1=Query1.Field2) AND
(Table3.field5 = Query1.Field1)
it works.
Please, is there anything that I can do to keep the MS Access Application unchanged?
Oracle = 8.1.6
Oracle ODBC Driver = 8.1.6.4
Oracle Migration Workbench = 1.3.1
Thanks in advance,
Elaine Viel Denadai

Problem with Tab to Next Field

Similar Messages

Maybe you are looking for