Problem with table maintenance generator
Hye,
When i do create entries in table contents, the column name is shown as (+)....
where the problem is ?? how to get resolved....tried recreating the TMG but not use.
Thanx & Regards,
Manisha Suvarna.
Hi Manisha Suvarna.
You can edit this information editing Maintenance view following steps below:
- Transaction Se55
- Environment -> Modification -> Modification Screens
There you can edit this information and Add the right value.
Kind regards
Similar Messages
-
Problem with table maintenance generator overview screen
I added a field in a custom table and then used table maintenance generator to regenerate the table maintenance screen.
I used 2 step to generate. The problem that I have is the field not displayed in the overview screen though it is visible in the single screen ( ie the second screen).
I am not sure where the problem is as the field is not visible at all in the table control of overview screen.
Please help me on this as to what could be the problem.Usually it is enough to regenerate both screens and the modules, but sometimes it doesn't pick up all the changes. In that case just delete the maintenance dialog and recreate it. That should do it.
Regards,
Michael -
EVENT problem in Table maintenance generator
Hello all
I m working on 4.6C sytem. I m facing 2 problems in events in table maintenance generator
(1) I am using 04 event (After deleting records from table) I have written BREAK-POINT in the Form .....ENDFORM... But the control doesnt stop there , when i select an existing record and press delete record button? not able to understand this
(2) When i implement even t 03( Before deleting records from table) , and select an existing record and press delete record button . Control successfully Go to corresponding FORM ... BREAK-POINT ENDFORM .
But now the problem is.. in debuggin i can see the contents in TOTAL table but when i try to code LOOP at TOTAL ..ENDLOOP...it gives me syntax error saying " table TOTAL doesnot exists or not defined..but similar field TOTAL_S , TOTAL_M , TOTAL_L exists.. ???
how come i can see the same during debugging but cannot code it ?
Plese help
NileshHi Nilesh,
(1) I think the control will stop there after you delete AND save. Not sure about that but give it a try.
(2) I believe you are trying to access fields inside table TOTAL, is that right?
Actually you have to declare a work area with your Z table type.
DATA: w_workarea type ztable.
LOOP at total.
w_workarea = total.
endoop.
Then you can work with w_workarea.
Best regards. -
Problem with table maintenance allowed
hi,
here my problem is table is genarated and stored under local object that time i m creating function group is zabc. afterwards i m storing my table in my development class that time it is not possible to change function group in table maintenance genarator plz help me any one knows.
what is the exact use of table maintenance generator i m using this for ztables and i m going to screen painter i m adjesting the fields.what is the exact use of it.Hi,
1) You may delete the function group assignment and re-assign another one in change mode
2) The use of table maintenance generator is to provide users with a screen to maintain data in the table. If the data is not going to be populated by any users then there is no need for it. Transactions will automatically populate the data in the background
3) One can access the maintenance screen by going to SM30 or can assign your own transaction code to access it
Hope it helps.
Raj
Reward points if helpful -
Delete data with table maintenance generator
Hi All,
I have created custom table ZXXX and table maintenance generator.
I need to maintain data but delete them too. I can update and modify data but how can I delete them ?
Thanks for your answers !
Best regards,
Sandrineok, I found ..
I created an internal table to delete the content of my table ZXXX :
DATA : ws_zxxx TYPE zxxx OCCURS 0 WITH HEADER LINE.
select * from zxxx into CORRESPONDING FIELDS OF TABLE ws_zxxx
DELETE zxxx from table ws_zxxx.
commit work.
it works !
thanks all ! -
Problem in Table Maintenance Generator
Hi All,
We have a TMG which have 11 fields with below fields as primary key.
CONTRACT_NO
ITEM_NO
PRODUCT
WAREHOUSE
VALIDITY_START
VALIDITY_END
As per standard , during Change Mode these keys will be disable.
My requirment is to enable the VALIDITY_END in change mode also. I have done that by changing the attribute in SE51(Input Possible).
Now Problem is When I change the VALIDITY_END and saves it, In TMG it shows message "Data Saved" but when I check the
database table , Changes not reflected.
Please help.
Thanks
JitendraHi Jitu,
I agree this is not the right way to do this. You should keep the following in your key fields. And validity_end as normal field. Use the table maintenance events to make validity_end as a mandatory field. Using this events you can pass error messages to user if they keep it blank.
CONTRACT_NO
ITEM_NO
PRODUCT
WAREHOUSE
VALIDITY_START
Best Regards,
Tapodipta Khan. -
Problem with table maintenance event
Hi Experts,
In the table maintenance event 05 for a ztable, I have written logic to validate if few key fields and non key fields are not initial.
If they are initial,need to throw an error message and it has to stay in the same screen.But right now it grays out the non key field.
Tried the combination of events 01 and 05 it grays out the key field.
Please let me know if there are any ways to achieve this without making modifications in the PBO or PAI of the ztable.
Regards,
SrideviI have this exact problem, why is this thread 'closed'? Is there an answer provided somewhere?
I have found a topic which shows an information message, which claims that the data is not saved.
But it does save the data if you use an information message and blocks non-key fields when using an error message
so this problem is still open for me.
Does anybody have a solution?
Ah an answer was indeed provided in another topic:
Issuing an Error in Table Maintenance Event
Edited by: Arno ter Horst on May 5, 2011 4:12 PM -
Problem with table maintenance and screen
Hi,
I modified the screen for a maintenance view table and added new fields. I went to SE11 to add the new fields in the table and then to SE51 to change the layout. My problem is when I edit the new field that I added, a message(Data was saved) at the bottom of the screen will appear but the value that I put in the field is gone. When i checked the contents of the table, the values were not also updated. Please let me know if there are other things that I forgot to activate or change.
Thanks in advance,
EricHi
Its the other way.
First you modify the table to add new fields. Goto sm30, delete the already generated maintenance screens and then regenerate them.
Regards,
Raj -
Problem with table maintenance
hello there,
when iam tring to edit this custom table it says transport has been locked and not allowing me to change ..anybody know how to solve this issue ..
thanksHi,
In SE10 (or similar) you can lock or unlock a transport.
On the menu choose Request/Task -> Request -> Protect or Remove Protection, if the message is coming up with a transport that is not in you user id, check with the transport's owner.
Regards,
Nick -
Table maintenance generator is not saving entries.
Hi All,
I am facing problem in table maintenance generator.
I created a table maintenance for Z-Table.
In my table last 2 fields are a checkbox.
When we go to Sm30 and check/uncheck the boxes then save , message comes tht data saved , but when we come out and go back to maintenance generator , it's not saved.
while table maintenance in 2 step , then on detail screen it is working perfectly but on primary screen it's not.
when TM is single step , it's show entries saved but not saving in data.
I tried to delete and regenerate table maintenance but still not working .
Please guide me to ractify this.
Thanks in advance,
Ashish GautamHello Friend,
Check with th etechnical settings of the ztable:
see if your buffereing is allowed, and log data chnages is checked.
If so :
Then select buffereing is not allowed and uncheck the Log Data Changes:
Also go to TMG:
Check if standard recording routine is selected, then select the no, or user recording routine.
After making these changes, delete the TMG and create a new one once again. You can check it will work fine now.
Thanks and regards,
Uttam Agrawal
[http://uttambpt.blogspot.com|http://uttambpt.blogspot.com]
Edited by: uttamagrawal on Jan 31, 2011 12:42 PM -
Problem with a maintenance dialog for a table
Hi,
I created a table (ztable) with transaction code SE11 and a transaction (ztransaction) with SE93 to manage this table (ztable).
When I use the transaction "ztransaction", I have a message like this :
"The maintenance dialog for ZTABLE is incomplete or not defined".
What can I do ? How can I complete or define the maintenance dialog ?
Thanks in advance.
Regards.
C.First after creating a table you should creat a Table maintenance generator.
Utilities -> Table Maintenance Generator .
After creating Maintenance goto
Environment -> Transaction
This will succesfully create a transaction for your table
You should give parameters while creating the transaction.
UPDATE = 'X'
VIEWNAME = your table name
Bhupal -
Table maintenance generator with radiobuttons
Hello,
how can I automatically (via se11: table maintenance generator) generate from a DDIC-structure the radiobtton-fields on a dynpro?
If I use the domaine 'X' or 'XFELD', I only get checkboxes....
kind regardsHi,
Table Maintenance Generator will create the Z Screens.
In order modify those Z screens go to SE80 and give the
Function group for that table maintenance generator.
Then to find the function group go to sm30, give the table name and click on display. It show a screen with table control. Click on System -> Status .
It gives you the Z screen information.
Give that Z screen in SE80 and do the changes accordingly.
I hope it helps you.
Regards,
Gopi -
Can you please help me with validation logic for Events in Table maintenance generator
Can you please help me with validation logic for Events in Table maintenance generator,i.e if i enter record in 1st internal table then automatically 2nd internal table should be updated.
Hi Glen Anthony,
Thanks for replay,
I used foreign key relationship between those 2 internal tables....
I used event 05: When creating a new entry. I want to know the custom logic by which my 2nd Internal table gets automatically updated when i update my 1st Internal table
Thanks Glen. -
Table maintenance generator problem
Hi Experts,
I a table maintenance generator I have to check for authorization in plant level before deleting an entry. I have created a routine which is of "03-Before deleting the data displayed". But in that if I read ytable-plant it has null. It doesn't point out which row I have selected. But for updation, it takes the exact row values which I have selected.
How can I read the line which I have selected.
Thanks and regards,
VenkatHello Venat
It will be very confusing for users if there are deletable and non-deletable entries side by side in your maintenance view. Instead, you should do the AUTH-CHECK at the beginning and restrict the selectable data accordingly. All data that are now displayed can be treated the same way (including DELETION).
Regards
Uwe -
Add field in table maintenance generator screen of maintenance view
Hi,
I am having a table with field user-id. I want to generate a maintenance view which will have corresponding user name as input disabled field. Since there are two tables USR21 and ADRP I need to access(not a direct check table) I will have to modify the code generated by the table maintenance generator.
Problem is that it is having one internal table EXTRACT at table control loop. That internal table cannot be accessed if you write a module inside the table control loop and try to catch. The error coming as EXTRACT is not object of structure and therefore no component. I tried to capture the value of the Loop but could not be successful. Any suggestion please.
Thanks,
AtanuHi,
sample:
MODULE LISTE_UPDATE_LISTE.
ENDCHAIN.
*--->begin of your change
CHAIN.
FIELD YTAB1-BILKS .
FIELD YTAB1-BILKH .
module check_bewar ON CHAIN-input. "your checks
ENDCHAIN.
*-----> end of your change
ENDLOOP.
MODULE LISTE_AFTER_LOOP.
-> module check_bewar is in an includ z123_INCL
Regards Andreas
Maybe you are looking for
-
Windows XP FF 20.0 I have Adobe Acrobat X 10.1.6. and the plugin checker says its out of date. I don't think it is, it's just not Abobe Reader. I don't want to have both Acrobat and Reader. When I do, then there's two different plug-ins in FF, but th
-
Adding line item prior to ACC_DOCUMENT03 Posting
Due to our legacy currency alignment on some systems being incongruent with our SAP ECC 6.0 environment, some upstream inbound IDocs will post with 2 decimals for HUF when 6.0 environment has 0 decimals for HUF. The inbound documents are coming in a
-
Hello, I am running Adobe Suite CS 5.1 on my Mac: 2.8 GHz Quad Core 6GB Memory I've been having issues with a few projects; using Dynamic Link, directly from my project in Premier, to send them to Encore: When attempting to burn a DVD, Encore will 'h
-
Can i restore deleted contacts
Hi As stupid as it sounds i entered the reset key not thinking it would wipe everything.. I have a backup from 5 months a go but i have added alot of new numbers since plus my holiday pic on the phone memory. Is there anyway to recover the data?
-
Is there really still only one range key for partitions?
Hi All, I had need to look up the manual on partitioning functions. The manual reads like there is still only one field available to define as the partition key with left and right for placement. Am I reading this right? That MSFT have not yet enabl