Problem with Task Aggregation from Project Server with old Project Server permissions mode.

Hi, I have installed Sharepoint 2013 with all CU, and Project Server 2013 with June CU update. Later, I attached database from old Project Server 2010 database, all was OK, but now I have my PWA with old Project Server permissions mode.
After that I have created MySite with users from AD of my company, it's OK, but Task Aggregation not working. Moreover, I have not any errors on the MyTask page.
You can see that I can insert private tasks, but I can not see any tasks from pwa, however I have a lot of tasks there. Please help me.
My search works well amd WMA Service too.
Where directly crawler search the tasks? Maybe there are errors in search log with that ulrs?

Hi,
did you setup the Work Management Service Application in the Central Administration? If yes, please check if the Applicationpool account of the Work Managment Service has full Access to the User Profile Service Application (over the Ribbon | Permissions).
Check also if your Projects are published so that you have a Project Workspace for each Project. In the workspaces you should have a list "Tasks" or "Tasks1" for migrated workspaces. This is important because only Tasks from the workspaces' Tasklist are
shown in the Mysite
In any other cases please check the ULS Log and/or the Application Event log. Especially have a look to Distributed Cache Service and the Feed Cache.
Bernhard Fischer [MVP] | www.wodey.de

Similar Messages

Why did ps touch does not show saved project and my old project disappear?

Why did ps touch (ipad 4) does not show saved project and my old project disappear?

OldGhias,
Have you found a solution yet? I don’t know if I will be of any help but I was curious and no one else has chimed in yet.
I don’t quite understand all of your statement.
To clarify, you were making SimpleSave backups from Win95 and cannot see them all on the Win7 laptop?
Or
You were copying files over (SimpleSave utility not used) and you cannot see those files on Win7 but you can on the Win95 machine?
Do you have another Win7 machine you could connect the external to, to see if the files are still not showing (one that is not locked for work)?
On the drive that shows full, can you see it in Disk Management showing the correct size of the drive and also another CD drive? Not your real CD/DVD drive, it’s actually a CD emulator that is attached to the HDD for encrypting the backups and all SimpleSave’s have them.
Lastly, did you reformat the SimpleSave drive to Fat32 first?
My understanding is that USB support was quite limited on Win95 machines. Since Win95 is Fat32 and the SimpleSave drive is by default NTFS, I would think it would not work.

How do i sync my task list from MS Outlook with "Reminders"?

is there a way to sync my extensive Task list form Microsoft Outlook with my Reminders list on the iPod? it seems like I can only sync contacts, notes and calendar from Outlook. Am I missing something? thanks!

open itunes, connect ipad, select what you want, sync.
You should really read the manual

Manual creation of Project Site for a project is taking old project site template.

Dear All,
I have modified the project site and save it as a template to associate it with an EPT so that the modification will reflect in new project sites.
For existing projects, I am deleting the old project sites (after taking backup) and recreating so that new modifications will be there for existing projects and I am able to do so.
But, for 1 of the project, when I have deleted the project site and recreated, still it is taking the old template (i.e. new modifications has not been seen).
Kindly advice in some areas so that I can jump in and around and can find out a solution so that the project site will take modified project template.
Example to get the issue in an easy way:
ProjectA:
Project Site: http://epm/pwa/ProjectA
Issue List:
Column: Category [data type as Choice: Cat1, Cat2, Cat3]
Have saved 1 project site as a template and associated with an EPT with the following changes:
Column: Category [data type as Choice: Choice1, Choice2, Choice3]
Then, deleted the project site: http://epm/pwa/ProjectA and recreated.
So, it should take the modifications in the project site.
But, it is showing as Column: Category [data type as Choice: Cat1, Cat2, Cat3].
Regards,
Shravan

Dear Guillaume,
Thanks for your response.
Please seem my comments inline:
Which Project Server version do you use?
PS 2010
It is working well and as expected for all projects except for 1 specific project?
Yes. It is working well for other projects except 1 project.
Has this project something particular?
Nope. It is similar as other projects.
How do you proceed to create the new project site? Do you go to the site actions, then new site and pick up your new template?
First I have modified 1 of the project site and saved that site as a template.
Then, I have deleted the existing project site (from Project Sites under Operational Policies) and recreated so that project site will gets created from the new template. But, it's not happening.
Regards,
Shravan

Despite incorporating many suggestions, can't get iMovie to create new project or open old projects.

I cannot get iMovie '11 (version 9.0.9) to create a new project or open existing projects. I'm using OS X 10.8.5. According to Finder I have 405.39 GB available. I have tried reinstalling iMovie, but that did not work. I checked my Sharing & Permissions info and I have Read & Write privileges. I verified and repaired permissions on my hard drive. What else can I do?

Some basics:
Install all Windows Updates.
Install latest version of Apple QuickTime (v7.6.7 at time of writing). Even if you don't use QuickTime, PRE relies heavily on it.
Install most recent graphics and sound drivers from the manufacturers web sites.
Run Disk Cleanup.
Run Defragmenter.
Temporarily disable any anti-virus real time scanning.
Use the GSpot Codec Information Utility to analyse the file and post screen image.
Post back here with the necessary information described here: Got a Problem? How to Get Started
Cheers,
Neale
Insanity is hereditary, you get it from your children

Problem with reusing construction from userInfo(SRDemo) in other project

I want to realize how ADF Faces work, for this i look into SRDemo and the documentation. Now i want to reuse the construction from the bean userInfo in my own project.
I have build the bean userInfo and the class ...UserInfo.
In my jspx site i use the following code
<f:facet name="infoUser">

<h:outputFormat value="#{res['pob.connectedUser']}"
rendered="#{userInfo.authenticated}" escape="false">
<f:param value="#{userInfo.userName}"/>
</h:outputFormat>
</f:facet>
userInfo.authenticated produces true, but in this construction i never see the userName.
When i use the following construction
<h:outputFormat value="#{res['pob.connectedUser']} #{userInfo.userName}"
rendered="#{userInfo.authenticated}" escape="false">
</h:outputFormat>
</f:facet>
i become the userName. i check the code but i can't locate the problem.
any help is appreciated.

wheni use a static entry like
f:param value="Test"
it also don't work.
but i don't now what's the problem?

Problem with exported jpegs from CS5 PSDs with transparent backgrounds

I've detected an issue where when exporting jpegs from a CS5 PSD layered file with a transparent background, the jpegs don't have a pure white background (255, 255, 255). They seem to range from 250, 250, 250 to 253, 253, 253.
LR3 with same export settings does not show this behavior--it's pure white: 255, 255, 255.

Bill,
Another very helpful solution and I appreciate knowing how to fix it in both applications. Thanks!
Wolf

When I search for email in Apple Mail in Lion on my MacBook Air, vast numbers of emails are not found. Problem has been experienced from day 1 with computer.

Title says it all pretty much.

I finally found a solution. In about:config, under browser.sessionhistory.max_entries, I changed 5 to 20. End of problem.

Problems with photo import from iphone 4 with ios5 to pc

Help, when I try to import my pix using windows it will only import my first 77 pix which are already on my computer from past imports. The other 100 pix on my iphone do not import or even attempt. When the window comes up to import I click yes and it says importing 77 pix??? Why will it not import the other pix. I've recently updated my software to ios 5.0.1 but I'm not sure when I did this vs. the last imported pix. I have icloud but I clicked no on syncing pix to icould just because of all the space it would require. Any ideas???

More info: I can manually copy the pix from my iphone in the pc then paste to my folders in the pc??? I'm using Windows 7 home edition. And the 77 number is not the start/ending point of old pix new pix during software update.

Problem in idoc transfer from ent to r 4.6c server

hi,
   SAPR4.7->XI->R4.6c
   I've got a problem in transfering an IDOC from R4.7(ENT) to r4.6c server.My problem is, I have created an IDOC in R4.7 with 03 status,but in XI server (sxmb_moni) i get a message which reads 'NO_RECEIVER_DETERMINED'.I've configured all receiver sender details in configuration .I'm not able to trace out the problem.
   how many communication channels are needed?
   Can anyone help me with a 'detailed' walkthrough.

Hi,
'NO_RECEIVER_DETERMINED' occurs when no Receiver is configured.Check your configuraation once again.
As u have stated the return code is 03, the IDoc has successfully reached XI Server.
You don't need any communitaion channel for sending Idocs from SAP system to XI Server.
But You need a communication channel for XI Server-> SAPR/3 (4.6) communication.
Refer to "Introduction to IDoc-XI-File scenario and complete walk through for starters" by Prateek Shah
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Cheers,
Siva Maranani.

PowerPivot refresh error with data feed from sharepoint list with empty exception information

Hi,
My Powpivot refreshing error seems to be different from what others already experienced.
Scenario:
Constructed an external data source in the format of Http://<server_IP>/sites/<mysitecollection>/_vti_bin/listdata.svc
selected one table with some of the needed columns in the next step
Create calculate colums etc.
Create pivot tables etc.
All worked well offline
Upload the workbook into PowerPivot Gallery
Reference it from a page through Excel Web Service webpart allowing manual refresh
The refresh always reports failure with the named external data source
I opend the log file in C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS and located the following error messages:
ASPPHOST::ShowEngineError: Out of line object 'DataSource', referring to ID(s) 'f8939b694cae', has been specified but has not been used。The following exception occurred while the managed IDbCommand interface was being used: .
Please note in the above message, NO detailed exception message was given. In other words,
the exception information is empty.
I checked as many things as I possibly could includin the security accounts etc. All seem to be right. But this empty exception got me stuck here.
What could possibly go wrong? Any help will be appreciated.
Thanks.

Hello,
Here is a good article regarding Where to get information about data refresh failures for your reference, please see:
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshooting-powerpivot-data-refresh.aspx
In addition, which credential option you're configured for the PowerPivot data refresh in SharePoint farm? You can go through the following articles regarding configure the PowerPivot data refresh:
Configure the PowerPivot Unattended Data Refresh Account (PowerPivot for SharePoint):
http://technet.microsoft.com/en-us/library/ff773327.aspx
Configure Stored Credentials for PowerPivot Data Refresh (PowerPivot for SharePoint):
http://technet.microsoft.com/en-us/library/ee210671.aspx
Hope this helps.
Regards,
Elvis Long
TechNet Community Support

FR Studio - Is there a workaround for the issue with referencing data from a grid with a different DB connection and different # of dimensions?

Hi,
I am trying to reference a column in a different grid with a different database connection. I did some research in the forums, and it seems like this is a known issue with FR Studio. The issue is that if the 2 different database connections have different # of dimensions, then the reference will throw an error.
For example, what I'm trying to do is below:
In grid2.column[A], I have the following formula:
grid1.column[A]
The result is an error.
The ultimate goal is to have a basic variance formula in the grid between grid1 and grid2, which have different database connections with a different # of dimensions. Is there a workaround at all to this bug? The example of the basic formula is below:
grid1.column[A] - grid2.column[A]
Any help is much appreciated!
Thanks,
Tiffany

Thanks for the detailed response Mike.
The issue with trying it in Grid1 vs Grid2 is that Grid1's DB connection has more dimensions than Grid2's DB connection. I can't change the DB connection to a database with more dimensions because you have to be able to map all dimensions from the existing DB connection (Grid1) to the new DB connection (Grid2). This isn't possible, so instead I have to map Grid2 (less dimensions) to Grid1 (more dimensions). It just ignores the extra dimensions from Grid1. Does that make sense?
Thanks again for your responses. It's very much appreciated.
Tiffany

Emails with attachment send from and receive with XI

Hi,..
I have two questions regarding sending resp. sending mails from / to XI.
A) is it possible to attach several files as attachment to mails sent via the mail adapter?
Note: I do not want to send the message payload itself as attachment, but send an email with contents from the message payload and attach to this mail one or several files located at the disk as attachment?
If , yes how can I achieve this.
B) What happens with attached files, when the mail is sent to the XI mail adapter?
Thanks in advance,
Peter

Hi
>>A) is it possible to attach several files as attachment to mails sent via the mail adapter
Yes it is possible ,go thru these blogs...
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
Hope it helps.
Regards
Arpit Seth

Having trouble with creating objects from instances created with ClassLoade

Hi.
I'm having a bit of trouble with casting an instance of an object from a custom ClassLoader. Don't worry - the code isn't for anything sinister - it's for one of those life simulation thingies, but I want to make it modular so people can write their own 'viruses' which compete for survival. You know the score.
Anyway. I've got the beginnings of my main class, which seems to load the class data for all 'virus' classes in a folder called 'strains'. There is a abstract class called AbstractVirus which declares the method calls for how the viruses should behave and to get textual descriptions, etc. AbstractVirus is to be subclassed to create working virus classes and these are what my main class is trying to load instances of.
Unfortuantely, I can't cast the instances into AbstractVirus objects. The error I've been getting is 'ClassCastException' which I presume is something to do with the fact that my ClassLoader and the Bootstrap ClassLoader aren't seeing eye-to-eye with the class types. Can anyone help? This line of programming is really new to me.
My code for the main class is below:
/* LifeSim.java */
public class LifeSim {
public LifeSim() {
    /* Get a list of all classes in the 'strains' directory and store non-
     * abstract classes in an array. */
    Class virusClasses[] = null;
    try {
      /* Get a reference to the file folder 'strains' and make sure I can read
       * from it. */
      java.io.File modulesFolder = new java.io.File("strains");
      if (!modulesFolder.isDirectory() || !modulesFolder.canRead()) {
     System.out.println("Failed to find accessible 'strains' folder");
     System.exit(-1);
      /* Get a list of all the class files in the folder. */
      String virusFiles[] = modulesFolder.list(new ClassFileFilter());
      if (virusFiles.length == 0) {
     System.out.println("No virus strains in 'strains' folder");
     System.exit(-1);
      /* Create an array of class objects to store my Virus classes. Ignore the
       * abstract class as I cannot instantiate objects directly from it.*/
      virusClasses = new Class[virusFiles.length];
      VirusClassLoader classLoader = new VirusClassLoader();
      int j = 0;
      for (int i = 0; i < virusFiles.length; i++) {
     String virusName = "strains/" + virusFiles;
     Class tempClass = classLoader.loadClass(virusName);
     if (tempClass.getName().compareToIgnoreCase("strains.AbstractVirus") != 0) {
     virusClasses[j++] = tempClass;
} catch (ClassNotFoundException ncfe) {
System.out.println("Failed to access virus class files.");
ncfe.printStackTrace();
System.exit(-1);
/* TEST CODE: Create an instance of the first virus and print its class
* name and print details taken from methods defined in the AbstractVirus
* class. */
if (virusClasses.length > 0) {
try {
     // Print the class name
     System.out.println(virusClasses[0].getName());
     Object o = virusClasses[0].newInstance();
     strains.AbstractVirus av = (strains.AbstractVirus) o;
     // Print the virus name and it's description
     System.out.println(av.getQualifiedName());
     System.out.println(av.getDescription());
} catch (InstantiationException ie) { ie.printStackTrace(); }
     catch (IllegalAccessException iae) { iae.printStackTrace(); }
public static void main(String args[]) {
new LifeSim();
class ClassFileFilter implements java.io.FilenameFilter {
public boolean accept(java.io.File fileFolder, String fileName) {
if (_fileName.indexOf(".class") > 0) return true;
return false;
class VirusClassLoader extends ClassLoader {
private String legalClassName = null;
public VirusClassLoader() {
super(VirusClassLoader.class.getClassLoader());
public byte[] findClassData(String filename) {
try {
java.io.File sourcefile = new java.io.File(filename);
legalClassName = "strains." + sourcefile.getName().substring(0,sourcefile.getName().indexOf("."));
java.io.FileInputStream fis = new java.io.FileInputStream(sourcefile);
byte classbytes[] = new byte[fis.available()];
fis.read(classbytes);
fis.close();
return classbytes;
} catch (java.io.IOException ioex) {
return null;
public Class findClass(String classname) throws ClassNotFoundException {
byte classbytes[] = findClassData(classname);
if (classbytes == null) throw new ClassNotFoundException();
else {
return defineClass(legalClassName, classbytes, 0, classbytes.length);
Thank you in advance
Morgan

Two things:
I think your custom ClassLoader isn't delegating. In general a ClassLoader should begin by asking it's parent ClassLoader to get a class, and only if the parent loader fails get it itself. AFAIKS you could do what you're trying to do more easilly with URLClassLoader.
Second, beware that a java source file can, and often does, generate more than one class file. Ignore any class files whose names contain a $ character. It's possible you are loading an internal class which doesn't extend your abstract class.

Does anyone get daily newsletter from Living Rich With Coupons and found a problem reading them since last 2 updates?

Problem with daily emails from Living Rich with Coupons

IT is an IPAD gmail issue not a LRWC problem. My IPAD AIR that I did not update works fine. It is only my IPAD AIR that I updated.this is the strange problem...This site sends me very long daily emails. In the body of the email on the top when you would click on an item a line would come up on top where you could then go and read whole entry. After the update this does not show up on top. You have to scan down the entire email. I understand that if you do not get this daily email you have no idea what I am talking about. It is just driving me crazy and was hoping someone could help.

Problem with Task Aggregation from Project Server with old Project Server permissions mode.

Similar Messages

Maybe you are looking for