Problem with TCode DSWP

Dear all,
Im facing problem whenever i execute tcode DSWP in SolMan 3.2
Whole system is hang and clearly shown in ST06, CPU utilization is used up to 100% !!!
May i know how to resolve the problem?
Or from what kind of statistic that can give me indication that my server needs upgrade?
Please comment.
Thanks in advance.

Hi Ragu,
My RAM is 3GB. My server only have 2 drive, C and D. Basically D drive is the only drive that containing SAP stuff. The total space for D is 529GB, free space is 264GB.
While for the virtual memory, i notice only 2048MB assign to C drive. But there is NONE for D drive.
Pls comment how should i go about it.
Thanks in advance.

Similar Messages

Performance problem in tcode DSWP

Hi!
I have a performance problem in tcode DSWP, when I try to access some solution by pressing on it:
I can see Determining waring messages from CCMS and it takes a lot of time to access into the solution.
Can some one recommend some solution (perhaps it is possible to deactivate this future)?
Thank you!
regards
Thom

Hi,
Go to RZ20, open alets, close all of them. meaning, there should be one such option.
are you using ccms thru.. agent? then go to rz21, remote agent, make it offline.
Thanks,

Problem with Tcode: PT91_ATT : SAP-HR Standard to Zprogram

Hello Experts,
I have created the zreport from attendance in HR-payroll ( Tcode: PT91_ATT ). Actually I have copy the whole satandard report code (with Tcode: PT91_ATT ) to my zreport for the customized requirement. Also we have to add in selection parameter like : Projects and some more things, but I am unable to sort out such selection parameters where I should have to add in the program itself. Plz suggest where I have to make editing in program itself, If possible do suggest with program-code.
Regards,
Akg

Hi.,
I think i xplained clearly., k. first goto se38 enter RPMENUSTART00 and click on copy., copy every thing to zprogram say, ZRPMENUSTART00.
now enter RPTABS60 (which contains code for data declarations and selection screen and events) and click on copy., copy all including includes., to ZRPTABS60. now modify ZRPTABS60., according to ur requirement.
and in ur ZRPMENUSTART00 instead of SUBMIT (g_reportname) VIA SELECTION-SCREEN USING SELECTION-SET g_stvar. at line 33 u can directly give ZRPTABS60., or do like this., g_reportname = ZRPTABS60.
hope this helps u.,
Thanks & Regards
Kiran

Problem with tcode FMCACOV "No valid configuration found"

Hi experts
i'm trying to prove this transaction:
Tcode FMCACOV (program FMCA_COV) "Business Partner Overview"
the system spits out this message:
"No valid configuration found" Message no. FMCA_COV004
can you help me?
thanks!

If this is a new domain, it could take days for all the needed name servers to get all the DNS records they need. However the registration in 2014 would indicate it is not that new http://www.dnsstuff.com/tools#whois|type=domain&&value=southcoaststeel.co.uk
I am guessing your mail provider has an old name server record without an MX record. Although MX record support for the domain is fairly spotty see http://www.dnsstuff.com/tools#ispCacheLookup|type=domain&&value=southcoaststeel.co.uk&&recordType=MX
They have an MX now, although the domain setup does appear to have other issues like no A record. see http://www.dnsstuff.com/tools#dnsReport|type=domain&&value=southcoaststeel.co.uk

Problem with TCODE PK02 with the warehouse number field.

Hello folks,
I have created a control cycle in the TCODE PK01. When I tried to change it it is not displaying the warehouse number that I have used while saving. Also here it is showing the warehouse number as a mandatory field.
I have input the warehouse number in the PK02 TCODE and saved. I am able to see the warehouse number value updated in the table also. But again if I try to enter the PK02 TCODE , it is displaying empty warehouse number and showing as a mandatory field.
Also in TCODE PK03 tcode , I am not able to see the warehouse number field I have saved.
Can anyone address on the below issues?:
1. how to configure the PK02 warehouse number mandatory field settings and
2. Populating the warehouse number field in the PK02 and PK03.
Thanks,
Ramineni.
<< Moderator message - You have a better chance of getting answers to a question if you flag your thread as a question rather than removing the flag. >>
Edited by: Rob Burbank on Jun 14, 2011 9:57 AM

Hi,
I do not see warehouse number field in contorl cycle defination..
what type of control cycle is this? Classic or event driven?
Looks like this is a Z screen field..
check if user exit is impliemented properly.
Thanks,
Santosh Sarda

Problem with TCode VF04, Billing Due List

Hi,
In billing due list (Transaction VF04) we find that when the sales orders are displayed on execution of this transaction and we select all the sales orders and click on collective billing button, very few of them are included in the proforma invoice. Earlier all of those selected used to become part of proforma invoice.
I have tried debugging after selecting all the sales order and clicking on the collective billing button (all of which is standard SAP code), but cannot understand
why some of the sales order are included in the proforma invoice and why some are not included.
Any help would be greatly appreciated.
Thanks in advance.
Mick

Thanks Ganesh. All are order type ZO05. These are document sales orders (DSO). This is a cutomised type of sales order.
However this is the 1st time we have got such a issue when we select all the sales orders and only few of them selectively become part of a proforma invoice.
Your help would be greatly appreciated.

Problem with cheque printing in production Server Tcode - FBZ5

Hi
Cheque Printing using SAPScript with TCODE FBZ5.
I had a problem with cheque printing in production Server. TCODE - FBZ5
It is working fine in Development Server with proper alligned data but not coming alligned data in production server. I compared, dubugged and checked the allignment...there is no difference I found.
Could you please let me know, where the problem is occuring.
The amount is not coming properly and coming out of the box.....but it is coming properly in development server.
Sekhar

Hi,
For Amount field you must print like &amount(C)&. And it must be printer settings only. Because i gor same like this error while printing cheque. at that time Basis team had made the changes in printer settings.

Problem with SAVE in Tcode ORGANISER

Hi!
I've an issue with Tcode ORGANISER.
When I push Save button the first time, this transacction works fine but if I modify the same record and push Save again, the transacction not save the changes.
In debug mode the second time I see the values of fields and they don't change. The transacction keep values from first time.
When I change expedient o restart the transacction do the same. Works fine first SAVE action but not following times.
Do you have any idea?
Thanks.

Hello Alberto,
I couldn't find this t.code in ECC 6.0 system.
Could you please tell in which system your are checking this t.code ?
Regards,
TP

Normal corrections "SDMJ" are not visible under tcode "DSWP"

Hi!
I have the following problem by working with ChaRM and normal corrections.
There are two types of normal corrections:
1) Normal Correction (type:SDMI)
2) Normal Correction (type: SDMJ)
Problem
Since a few days it is not possible to see all the SDMJ normal corrections within tcode
DSWP --> Change Management --> Drop Down "Not Completed".
Only the SDMI normal corrections are visible there.
Questions:
how can this issue be customized in order to see the normal corrections of type: SDMJ in tcode DSWP?
Thank you very much!
regards

We implement SAP Work Center

Tcode DSWP, Determining warning messages from CCMS

We use SAP Solution Manager 4.0, SPS 13 for System Monitoring of almost 100 systems.
We configured SOLMAN as CEN system and activated the CCMSPING with push option.
For almost the 2/3 of the systems we configured SAPCCM4X agents.
Our current problem is a performance issue in tcode DSWP. When we try to enter into one of the solutions there (by pressing on it) we get the following warning:
Determining warning messages from CCMS
It tooks a while and then it is possible to access the desired solution.
My important question is of course:
How can this issue be solved?
Is there some techniques to analyse and change the problem
How can I check whether all the agents work in push mode and that we do not use standard CCMS methods that can cause the RFC load?
Thank you very much for any helpful information
Regards
Thom

Hi Thom,
Have you already installed CCMS agents, the will speed up communication? That's definitely required in your situation with many systems connected to SolMan.
See [http://service.sap.com/monitoring|http://service.sap.com/monitoring]
You can also check CPU, Memory, as recommended by Afi, but I expect that this will not be the bottleneck.
Response times depend on the number of connect systems, number of activated monitoring objects (MTE nodes), number of server, instances.
If you are not satisfied with performance, I would recommend to open a customer message on component SV-SMG-OP or SV-SMG-MON-SYS.
Best regards,
Ruediger

System monitoring, open tasks are no longer visible in Tcode DSWP

Hello!
I have patched my Solution Manager with the newest support packages and have the problem with system monitoring, open tasks. All the systems have a long_sid.
I have implemented the SAP notes 1065285 and 1076772, but it was not sucessfull.
<b>As well as open tasks as system monitoring are no longer visible in the Tcode DSWP.</b>
Has some one the same problem or can help me to solve this problem?
Thank you very much
regards
Thom

Hello Thom,
did have a look at SAP Note 1038134?
If you are using Solution Mnager roles for System Monitoring the authorization check has changed and you need to maintain authorization object S_SOLM_ACT.
Best regards,
annett

Problem with material and document date in sales order

Hi All,
I am working in ECC 6.0 .I am facing problem with two fields when in enter in to sales order(tcode:va01)
1.A material comes automatically in line item.
2.Document date also comes as 27.03.2008 instead of todays date in each order i create.
I think its not related to configuration.I think its related to some modifications through exits or enhancement points.could someone suggest me a where to check and solve that.
Your's suggestion is appreciated.

Hi Sharad,
Check MV45AFZZ include in se38..It is a user exit for basic validation on sales...We may be able to find some code there (if screen data is predefined by code as mentioned)
Hope it helps
Regards
Byju

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Getting error while creating maintenance transaction in tcode DSWP

I am getting below error when I am creating new maintenance transaction in solution manager tcode DSWP and selecting option automatically select files
Transaction must be assigned to a Standalone Product Version
When I am choosing the option select manually ,it is working fine.
please guide me from here
Thanks,
Kunal Gahlot

Hi Sri,
          The product version is maintianed correctly under SCM 7.0 EHP1.
          We are getting EWA reports regularly for the system SCM 7.0 EHP1 which we have installed.
          The only problem we are facing is in automatic selection of files in the maintenance transaction.
Regards,
Kunal Gahlot

Problem with Creation of TemSe file...

HI Experts...
Here im facing the problem with creation of # 3 rd Quarters
Temse file.when ever i use the tcode pc00_m40_f24 and entering the details of quater 3 ...here im showing up the ABAP Runtime error."""Overflow for arthimitic operation Type P in program HINCF240"".
What could be done to overcome the problem.Please advice.
Regards,
V Sai.

Hi experts/Sriram...
Thanks for the reply.
The -
>showing the line....
QS80_TAB-DEDMT=QS80_TAB-DEDMT+S80-DEDMT
Where should we change to get rid of this runtime error.
Here in my quality everthing is fine and we have uploaded patches in quality upto recent one sp80.But in prod. the patchlevel is sp71.Will it be the reason.
Please advice me on this as i have to complete the issue of F16.
Thanks and Regards,
V Sai.

Problem with TCode DSWP

Similar Messages

Maybe you are looking for