Problem with tcode FMCACOV "No valid configuration found"

Hi experts
i'm trying to prove this transaction:
Tcode FMCACOV (program FMCA_COV) "Business Partner Overview"
the system spits out this message:
"No valid configuration found" Message no. FMCA_COV004
can you help me?
thanks!

If this is a new domain, it could take days for all the needed name servers to get all the DNS records they need. However the registration in 2014 would indicate it is not that new http://www.dnsstuff.com/tools#whois|type=domain&&value=southcoaststeel.co.uk
I am guessing your mail provider has an old name server record without an MX record. Although MX record support for the domain is fairly spotty see http://www.dnsstuff.com/tools#ispCacheLookup|type=domain&&value=southcoaststeel.co.uk&&recordType=MX
They have an MX now, although the domain setup does appear to have other issues like no A record. see http://www.dnsstuff.com/tools#dnsReport|type=domain&&value=southcoaststeel.co.uk

Similar Messages

I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.

I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

Problem with logminer in Data Guard configuration

Hi all,
I experience strange problem with applying of the logs in DataGuard configuration on the logical standby database side.
I've set up the configuration step by step as it is described in documentation (Oracle Data Guard Concepts and Administration, chapter 4).
Everything went fine until I issued
ALTER DATABASE START LOGICAL STANDBY APPLY;
I saw that log applying process was started by checking the output of
SELECT NAME, VALUE FROM V$LOGSTDBY_STATS WHERE NAME = 'coordinator state';
and
SELECT TYPE, HIGH_SCN, STATUS FROM V$LOGSTDBY;
but in few minutes it stoped and quering DBA_LOGSTDBY_EVENTS I saw the following records:
ORA-16111: log mining and apply setting up
ORA-01332: internal Logminer Dictionary error
Alert log says the following:
LOGSTDBY event: ORA-01332: internal Logminer Dictionary error
Wed Jan 21 16:57:57 2004
Errors in file /opt/oracle/admin/whouse/bdump/whouse_lsp0_5817.trc:
ORA-01332: internal Logminer Dictionary error
Here is the end of the whouse_lsp0_5817.trc
error 1332 detected in background process
OPIRIP: Uncaught error 447. Error stack:
ORA-00447: fatal error in background process
ORA-01332: internal Logminer Dictionary error
But the most useful info I found in one more trace file (whouse_p001_5821.trc):
krvxmrs: Leaving by exception: 604
ORA-00604: error occurred at recursive SQL level 1
ORA-01031: insufficient privileges
ORA-06512: at "SYS.LOGMNR_KRVRDREPDICT3", line 68
ORA-06512: at line 1
Seems that somewhere the correct privileges were not given or smth like this. By the way I was doing all the operations under SYS account (as SYSDBA).
Could smb give me a clue where could be my mistake or what was done in the wrong way?
Thank you in advance.

Which is your SSIS version?
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Problem with Mobile Gateway 1.0 Configuration

reffering to the config guide for mobile gateway 1.0 (https://websmp102.sap-ag.de/~sapdownload/011000358700000518422009E/Config_Guide_MGW_SP01_rev.pdf) we are facing some problems with the configuration in the DOE.
In Chapter 4.1.1.4 a SWCV "MAS_SMARTPHONE" is mentioned, which is not available in our System, though all other steps before have been successfully executed.
We are on SP08 and SWCV "SAP BASIS 7.10" is activated and generated.
Does anyone know a workaround?
Thanks in advance

i think i located the problem in the DOE.
When a new device is registered (by user-login from device) some LUW's are listed in the SMQ2 for that Queue. Here several dumps occur:
--> 100 ABBTO RR014013005_DRFILLING_006 MMW_RR_RR014013005 05.11.2009 18:19:51 Syntax error in program
ZDOECL_013_005_STRWRPR==== 0A0A001710804AF2FB270034
0A0A001710804AF2FB270034 bgw23
--> 100 ABBTO RR014013002_DEPQ_SERVICE MMW_RR_RR014013002 05.11.2009 18:19:53 Syntax error in program
ZDOECL_013_002_STRWRPR==== 0A0A001710604AF2FB29000E
0A0A001710604AF2FB29000E bgw23
From ST22:
Error in the ABAP application program.
The current ABAP program "SAPLSMMW_STRWRAPPER_APIS" had to be interrupted
because it contains
a statement that cannot be executed.
In the include "ZDOECL_013_002_STRWRPR========CM001 " in the line 21 of program
"ZDOECL_013_002_STRWRPR========CP " the following syntax
errors occur:
"Field "INIT_FLAG" is unknown. It is neither in one of the specified ta"
"bles nor defined by a "DATA" statement. "DATA" statement."

Who has no problem with Audigy2Zs Platinum Card what configuration are you usi

Since upgrading to Audigy2Zs Platinum,I've had a host of problem not experience on my previous Audigy's which were simply set-it and forget-it. SO, I'm interested in YOUR configurations, speakers, creative apps, and dvd player since I mostly use my rig to view DVD's. my config is;
PowerDvD 6 Deluxe with all audio paks, set to Spdif
THX console: 5., analog, 96 Khz, speaker above monitor, Volume Balance Adj ALL 6.0"
EAX Console: preset Garage.
Surround Mixer: Volume, Bass, Treble 75%(-7.5db). Wave, Speakers Volume controls 00%.
Speakers Klipsch Promedia 5. THX.
Rig: ALienware 2002 Area-5, P4 2.5 with Intel MBO.
HOw 'bout it!
regards,
AL

ASUS P4P800 Deluxe (Intel SATA RAID controller, VIA IDE RAID controller)
Intel 3 GHz P4 HT (Socket 478)
SB Audigy 2 ZS Platinum
GB Corsair DDR 3200 RAM
ATI Radeon x800 XT All-In-Wonder 256MB AGP 8x
Sony 8x DVD Recorder (all formats up to +DL)
Sony 52x32x52 CD-RW/6x DVD-ROM Dri've
(2) 20 GB Maxtor SATA HDD (RAID 0)
(2) 80 GB Maxtor ATA HDD (2MB Cache, RAID 0)
80 GB Maxtor ATA HDD (Standard config on VIA controller)
Antec Soho Server tower running an Antec 480W NEOPower power supply
After my last reconfig, I tried to load the drivers for the sound card. I kept getting a problem with the computer restarting in mid-install. After finishing the install in Safe Mode, I went to load a midi file and my computer restarted without warning. After trying to upgrade to the new beta drivers, my computer restarted once more (stopping at the soundfont driver). Apparently, the SoundFont drivers no longer work in my setup. I'm currently using the MS GS Wavetable Synth for MIDI.

Problem with Tcode: PT91_ATT : SAP-HR Standard to Zprogram

Hello Experts,
I have created the zreport from attendance in HR-payroll ( Tcode: PT91_ATT ). Actually I have copy the whole satandard report code (with Tcode: PT91_ATT ) to my zreport for the customized requirement. Also we have to add in selection parameter like : Projects and some more things, but I am unable to sort out such selection parameters where I should have to add in the program itself. Plz suggest where I have to make editing in program itself, If possible do suggest with program-code.
Regards,
Akg

Hi.,
I think i xplained clearly., k. first goto se38 enter RPMENUSTART00 and click on copy., copy every thing to zprogram say, ZRPMENUSTART00.
now enter RPTABS60 (which contains code for data declarations and selection screen and events) and click on copy., copy all including includes., to ZRPTABS60. now modify ZRPTABS60., according to ur requirement.
and in ur ZRPMENUSTART00 instead of SUBMIT (g_reportname) VIA SELECTION-SCREEN USING SELECTION-SET g_stvar. at line 33 u can directly give ZRPTABS60., or do like this., g_reportname = ZRPTABS60.
hope this helps u.,
Thanks & Regards
Kiran

Problem with Database Initialization when using Configuration Manager (ubuntu-jboss-mysql)

Hello,
When I try to initialize the database using Configuration Manager, the following error occurs:
ALC-TTN-002-001: JDBC datasource lookup failed for resource reference [java:comp/env/jdbc/
IdpDs]. The most likely cause is that a datasource having a JNDI
name of [IDP_DS] does not exist or is misconfigured. Check the application
server's configuration.
I DO have an IDP_DS datasource configured in jboss. I carefully followed the Jboss configuration instructions, so I don't really understand which is the issue here.
Anyone encountered a similar problem? Any help?
Many thanks in advance,
Artur

Data source files have to end with ds.xml and should be copied to the /deploy folder of your JBoss configuration (all) for them to be picked up by JBoss.
If the file was edited in Windows, make sure it does not contain DOS characters. Ubuntu Linux is not a supported LiveCycle OS platform currently. Only Red Hat Enterprise and SUSE Enterprise are.

Problem with CCMS PI7.1 alert configuration for RWB Alert count

Hi,
We have configured CCMS alert for PI7.1 RWB failure count. Alert is getting triggered only one time and after that no alerts. I can see the change in data but alert is not getting triggered. If I complete the alert then immediately in next run a new alert is generated with last reported data and then again there will be no alert going forward. Data is collected but no alert is triggered. Does anyone know the reason for this and how to fix it? Please help.
Thanks,
Kavitha Rajan.

Hi Jayan,
Our PI alert configuration is fine. And also we did not choose multiple suppress method. Problem is with Solution Manager CCMS PI alert configuration for failed RWB count. After initil alert and then nomore alerts are triggered. If I complete the alert then again only first alert is triggered and again no alerts going forward. Please advice.
Thanks,
Kavitha Rajan.

Problem with Mobile Gateway 1.1 Configuration

Hello everyone,
During installation of Gateway 1.1 to SAP Netweaver Mobile(Mobile Sales), I met one problem about not retrieving Activity on device.
I've checked in SAP Netweaver Mobile administrator, the reason looks like that Activity data objects don't met with Distribution Rule Critieria, which is ET_ACTIVITY_H - USER_ID EQ abc. All my loaded Activity data objects contain empty value in USER_ID field.
So, does anyone know how to fix it?
Thanks in advance.

I've searched in this forum and found Re: NetWeaver Mobile / Sybase. I also follow steps of "GW_11_SP01_CRM_Config_Guide.pdf", but the result is still what I provide in the first post.
I'm not familiar with CRM system, and guess that one way to resolve it is to insert one activity with USER_ID = abc into CRM system.
Does someone have any experience about this topic?

Problem with acrobat 9 when validating text fields

Hello
I've been using a script to provide feedback for my English Students. The correct input turns the backgroundcolor to green, an incorrect one turns it to red. This script has been working fine for many years including Acrobat Reader 8, but version 9 gives me a problem. When filling in the field and pressing enter, nothing happens, only when you give focus to the filled in field again does the color change. Leaving the field turns the color again to its original. Here is a link to an example:
http://schulen.eduhi.at/herderschule/pdf/E3/e3u1sentences.pdf
Try it with reader 9 and a previous version and you'll see what I mean.
Can somebody help me fix this problem?
Here is the code that I'm using to validate the textfields:
//TestLetter
/*********** belongs to: Document-Level:TestLetter ***********/
     var f = this.getField("1")
          f.value = "";
     var f = this.getField("2")
          f.value = "";
function TestLetter(FieldName,FieldValue)
var RetValue;
   RetValue = false;
switch (FieldName)
    case "1":
      if (FieldValue == "in the Australian bush.")
           RetValue = true;
         break;
    case "2":
      if (FieldValue == "for a pack of dingoes.")
           RetValue = true;
             break;
     default:
     RetValue = false;
     break;
return RetValue;
//trim
/*********** belongs to: Document-Level:trim ***********/
function trim(inputString) {
   if (typeof inputString != "string") { return inputString; }
   var retValue = inputString;
   var ch = retValue.substring(0, 1);
   while (ch == " ") {
      retValue = retValue.substring(1, retValue.length);
      ch = retValue.substring(0, 1);
   ch = retValue.substring(retValue.length-1, retValue.length);
   while (ch == " ") {
      retValue = retValue.substring(0, retValue.length-1);
      ch = retValue.substring(retValue.length-1, retValue.length);
   while (retValue.indexOf(" ") != -1) {
      retValue = retValue.substring(0, retValue.indexOf(" "))
    + retValue.substring(retValue.indexOf(" ")+1, retValue.length);
   return retValue;
//1:Validate
/*********** belongs to: AcroForm:1:Validate ***********/
event.value = trim(event.value);
var f = this.getField("1"); /* field that the event occurs at */
     f.readonly = false;
     f.fillColor = color.ltGray
if (event.value != "")
if (TestLetter("1",event.value)==true)
    f.fillColor = color.green;
else
f.fillColor = color.red;
//2:Validate
/*********** belongs to: AcroForm:2:Validate ***********/
event.value = trim(event.value);
var f = this.getField("2"); /* field that the event occurs at */
     f.readonly = false;
     f.fillColor = color.ltGray
if (event.value != "")
if (TestLetter("2",event.value)==true)
    f.fillColor = color.green;
Else
f.fillColor = color.red;

You probably have field highlighting turned on. You can use JavaScript in the file to turn off this user preference setting.
I'd also suggest a code change:
event.value = trim(event.value);
var f = event.target; /* field that the event occurs at */
George

Having Problems with "pattern" in Spry Validation Text Field

Hi, thanks for reading. I have read the primers and docs on
using the "custom" pattern ability of the spry textfield validion.
However, I am unable to fully understand how to implement the
conditions I desire. I have read that you use:
"B"; "b" for Case-insensitive alphabetic characters.
I suppose my first question is, does that mean either B or b
will work?
What I am trying to accomplish for my first validation is:
1- to allow between 1 and 15 characters to be entered. They
should be only a) alphanumeric (number or letter) b) they MAY
contain a space in there and c) the first character needs to be a
letter. So, what I want it to scrub for is a char string no longer
than 15 chars, number or letter (may contain a space, but that
counts towards the 15) and the first char must be a letter.
I have been playing around with the attributes:
("spryCustomtest", "custom", {validateOn:["blur"],
minChars:1, maxChars:15, pattern:"a"});
however, i am unable to see how to specify the pattern so
that it allows for 1-15 chars and insists that only the first char
is a letter......
My second question is, how could I implement a field for
heightened password-choosing rules....
perhaps tell it to allow for:
a) minimum of 8 characters
b) at least one capital letter
c) at least one special character or number
d) maximum of 30 characters
thanks for any help, Tex

Did you ever find a solution for this?

Problems with cached previews and File Not Found errors in preview and build

I am having serious issues with Encore CS5.
When I try and build a preview or disk/image I am getting File Not Found errors. I have emptied the media cache in the preferences but my project still seems to be referencing previously cached files or rendered menus. Is there any way to manually delete previous previews or the cache. I know that there are no missing files in my project. Any help would be very much appreciated.
I am running Mac OS 10.6.4 and Encore 5.0

To fix your locales, see http://wiki.archlinux.org/index.php/Configuring_locales -- in specific, you'll need to uncomment the en_US.utf8 locale at least, since that's the one that's specified in your rc.conf

Problem with TCODE PK02 with the warehouse number field.

Hello folks,
I have created a control cycle in the TCODE PK01. When I tried to change it it is not displaying the warehouse number that I have used while saving. Also here it is showing the warehouse number as a mandatory field.
I have input the warehouse number in the PK02 TCODE and saved. I am able to see the warehouse number value updated in the table also. But again if I try to enter the PK02 TCODE , it is displaying empty warehouse number and showing as a mandatory field.
Also in TCODE PK03 tcode , I am not able to see the warehouse number field I have saved.
Can anyone address on the below issues?:
1. how to configure the PK02 warehouse number mandatory field settings and
2. Populating the warehouse number field in the PK02 and PK03.
Thanks,
Ramineni.
<< Moderator message - You have a better chance of getting answers to a question if you flag your thread as a question rather than removing the flag. >>
Edited by: Rob Burbank on Jun 14, 2011 9:57 AM

Hi,
I do not see warehouse number field in contorl cycle defination..
what type of control cycle is this? Classic or event driven?
Looks like this is a Z screen field..
check if user exit is impliemented properly.
Thanks,
Santosh Sarda

Problem with TCode DSWP

Dear all,
Im facing problem whenever i execute tcode DSWP in SolMan 3.2
Whole system is hang and clearly shown in ST06, CPU utilization is used up to 100% !!!
May i know how to resolve the problem?
Or from what kind of statistic that can give me indication that my server needs upgrade?
Please comment.
Thanks in advance.

Hi Ragu,
My RAM is 3GB. My server only have 2 drive, C and D. Basically D drive is the only drive that containing SAP stuff. The total space for D is 529GB, free space is 264GB.
While for the virtual memory, i notice only 2048MB assign to C drive. But there is NONE for D drive.
Pls comment how should i go about it.
Thanks in advance.

UIX XML-BC4J: Problem with UIX XML decimal validation

We have a messageTextInput field with the decimal validater:
<bc4j:messageTextInput id="ValPunteggio" attrName="ValPunteggio" name="ValPunteggio" prompt="Valore" >
     <onSubmitValidater>
          <decimal/>
     </onSubmitValidater>
</bc4j:messageTextInput>
But while client-side validation permit to enter a number with the character ',' as decimal separator, the server returns a JBO-25009 Error "attempting to create a oracle.jbo.domain.Number with value 10,4".

It's a known NLS bug that'll be fixed in 9.0.3.
There's no good workaround; you're forced to use the "period"
as the decimal separator so that the server-side code doesn't
choke.

Problem with tcode FMCACOV "No valid configuration found"

Similar Messages

Maybe you are looking for