Problem with Tempo change using factory - Please Help!

Hi, All
Im experiencing a problem when I change the tempo of an audio file and want to revert back to its original state. I understand that you can not just undo the process so I try and delete the file from my bin and import the file again. The problem that I am experiencing is that even though the original file is at the original tempo, once imported to my bin the temp changes automaticaly to the one I deleted. Is there something I am doing wrong? any help on this would be greatly appreciated.
Thanks
Patryk

you can stretch any audio file already recorded in Logic but there is simple rulethat you must follow:
the Sample must be recorded in Logic at original BPM tempo
you can use Bus routing or bounce...
all resulting files will be vere same as apple loop...
if your file is not recorded in logic just find the correct BPM and after tha, Bounce it!
G

Similar Messages

Got a new iPhone today and tried to restore from my old phone using icloud but kept coming up with a message that said problem with my icloud back up please help

Got a new iPhone today and tried to restore from my old phone using icloud but kept coming up with a message that said problem with my icloud back up please help

Hi there Clairemcaula,
You may find the troubleshooting steps in the article below helpful.
iCloud: Troubleshooting restoring an iCloud backup
http://support.apple.com/kb/ts4036
-Griff W.

Problems with Oracle XE on XP - Please help!

Hi,
I have oracle XE installed on my machine and it was working absolutely fine for the last year or so. Today there was an trojan intrusion which caused some issues with my windows xp OS like hiding some files, desktop etc. After everything was cleaned up and things back to normal. I am having issues with XE.
I can start and stop XE with out any issues and When I use the run sql command line, I can connect using - connect sys/sys as sydba and I can also run a query to see all the users and see the HR user also.
However, 1. When I connect to my hr user using connect hr/password@xe, it just hangs
2. I tried the- go to Oracle XE admin page but it just hangs for a long time and returns page cannot be found.
3. I can tnsping the xe instance.
Not sure what the issue is? I am not a DBA and don't have much knowledge on this. Is a fresh install the only option? or is there any way to correct this using the sys/sys user?
I have pasted the listenor.log and listenor.ora details below. I tried a fresh install after removing XE. but the same issue!
Please help!
Thanks,
Nikita
Here is the output of listner.log
30-APR-2012 13:18:19 * service_update * xe * 0
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=nikita-lap)(PORT=8080))(Presentation=HTTP)(Session=RAW))
30-APR-2012 13:18:19 * service_update * xe * 0
30-APR-2012 13:18:22 * service_update * xe * 0
30-APR-2012 13:18:25 * service_update * xe * 0
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=nikita-lap)(PORT=8080))(Presentation=HTTP)(Session=RAW))
30-APR-2012 13:18:27 * service_died * xe * 12537
30-APR-2012 13:18:30 * service_register * xe * 0
30-APR-2012 13:18:30 * service_update * xe * 0
30-APR-2012 13:18:36 * service_update * xe * 0
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
30-APR-2012 13:18:39 * service_update * xe * 0
30-APR-2012 13:18:42 * service_update * xe * 0
30-APR-2012 13:18:48 * service_update * xe * 0
30-APR-2012 13:18:55 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1708)) * handoff * http * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
30-APR-2012 13:19:39 * service_update * xe * 0
30-APR-2012 13:19:42 * service_update * xe * 0
30-APR-2012 13:25:03 * service_update * xe * 0
30-APR-2012 13:25:05 * service_update * xe * 0
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
30-APR-2012 13:25:07 * service_died * xe * 12537
30-APR-2012 13:26:14 * service_register * xe * 0
30-APR-2012 13:26:15 * service_update * xe * 0
30-APR-2012 13:26:20 * service_update * xe * 0
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
30-APR-2012 13:26:23 * service_update * xe * 0
30-APR-2012 13:26:26 * service_update * xe * 0
30-APR-2012 13:26:29 * service_update * xe * 0
30-APR-2012 13:26:32 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1992)) * handoff * http * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
30-APR-2012 13:26:38 * service_update * xe * 0
Trace information written to C:\oraclexe\app\oracle\product\10.2.0\server\network\trace\listener.trc
30-APR-2012 13:28:43 * trace * 0
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=nikita-lap)(PORT=1521)))
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Listener completed notification to CRS on stop
30-APR-2012 13:31:01 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=nikita))(COMMAND=stop)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * stop * 0
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 30-APR-2012 13:31:06
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Log messages written to C:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
Trace information written to C:\oraclexe\app\oracle\product\10.2.0\server\network\trace\listener.trc
Trace level is currently 0
Started with pid=5236
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=nikita-lap)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
30-APR-2012 13:31:07 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=nikita))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * status * 0
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
30-APR-2012 13:32:03 * service_register * xe * 0
30-APR-2012 13:32:32 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=2040)) * handoff * http * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
30-APR-2012 13:35:00 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=nikita))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * status * 0
30-APR-2012 13:42:03 * service_update * xe * 0
and here is the contects of listenor.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = nikita-lap)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
-------------------------------------------------------------------------------------------------------------------------------------------------------

Hi Clcarter,
Apologies, Did not get notifications for this. Just logged in to check on the status and saw your updates. Looks like an issue with the host.Here is the output of the commands
Ethernet adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6200
AGN
Physical Address. . . . . . . . . : 00-27-10-D2-D3-4C
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 191.167.1.7
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 191.167.1.1
DHCP Server . . . . . . . . . . . : 191.167.1.1
DNS Servers . . . . . . . . . . . : 191.167.1.1
Lease Obtained. . . . . . . . . . : Sunday, May 06, 2012 1:14:20 PM
Lease Expires . . . . . . . . . . : Sunday, May 06, 2012 2:14:20 PM
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Intel(R) 82577LM Gigabit Network Con
nection
Physical Address. . . . . . . . . : 5C-26-0A-16-0E-BE
C:\Documents and Settings\nikita>netstat -an |findstr LISTEN
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1521 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1860 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1861 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1863 0.0.0.0:0 LISTENING
TCP 0.0.0.0:2030 0.0.0.0:0 LISTENING
TCP 0.0.0.0:2301 0.0.0.0:0 LISTENING
TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING
TCP 0.0.0.0:8180 0.0.0.0:0 LISTENING
TCP 127.0.0.1:1798 0.0.0.0:0 LISTENING
TCP 127.0.0.1:5152 0.0.0.0:0 LISTENING
TCP 127.0.0.1:5354 0.0.0.0:0 LISTENING
TCP 127.0.0.1:8080 0.0.0.0:0 LISTENING
TCP 127.0.0.1:27015 0.0.0.0:0 LISTENING
TCP 127.0.0.1:62514 0.0.0.0:0 LISTENING
TCP 127.0.0.1:62522 0.0.0.0:0 LISTENING
TCP 191.167.1.2:80 0.0.0.0:0 LISTENING
TCP 191.167.1.7:139 0.0.0.0:0 LISTENING
C:\Documents and Settings\nikita>nslookup 191.167.1.7
DNS request timed out.
timeout was 2 seconds.
*** Can't find server name for address 191.167.1.1: Timed out
*** Default servers are not available
Server: UnKnown
Address: 191.167.1.1
DNS request timed out.
timeout was 2 seconds.
*** Request to UnKnown timed-out
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 30-APR-2012 15:52:42
Uptime 5 days 21 hr. 47 min. 39 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=nikita-lap)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=
HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 3 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY, has 4 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 4 handler(s) for this service...
The command completed successfully
The nslookup throws a DNS error. could that be the problem?
Thanks,
Nikita

I have a brand computer and I have an ipod nano generation 7. How do you download your music from itunes to your ipod. I did it on the old computer but am having problems with the new computer. Please help. Thanks

Please help. I have a new computer and an ipod nano 7th generation. I am having problems getting my music from Itunes library to my ipod. How do you do it?

Hello Sandy
You can transfer the purchases from your iPhone to your new computer by following the steps in following article.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
If you have music that was not purchased from the iTunes Store, then you will not be able to move it from the iPhone to your computer. Instead you will need to follow the steps in this article that helps with moving the library from the old to the new.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I'm having a weird issue with my 3Gs using WIFI, please help me!

Everything was fine before today, and suddently I can't access internet via WIFI. The weird thing is that when I turn Wi-Fi off and back on, the iPhone can access internet for like 30 secs, and it goes dark again. I have constantly strong WIFI signal and my computer works fine. I've tried to reset my network settings and everything, it just keep happening.
Please HELP!

If no change after resetting network settings on your iPhone and/or after restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup (wi-fi settings are included with your iPhone's backup and if there is a problem with the settings included with your iPhone's backup, restoring from the backup will also restore the problem), more than likely your iPhone has a hardware failure with the wireless card or with something else.

There's a problem with my Asha 200. Please help.

my asha 200 has totally been disorganised,the social apps nolonger works and i can nolonger access the internet using my phone,the homescreen is faulty and some apps keep freezin,i tried to update the software but it tells me no software and no software provider available؛pliz help
Moderator's Note: We have moved your post and changed the title into a subject-related title. This is to keep the forum organized and let other forum users easily see and respond to this post.

Ashtin123 wrote:
There's a problem with my pervious purchase..
Then you need to Contact iTunes Customer Service
Use this Link > Apple Support iTunes Store Contact

Problem with I-trigue 5600 . Please help!

hi,
My I-trigue 5600 worked perfectly for over 4 years. Buy recently, my rear right channel stoped working I 've tried everything : all satellites work poperly,drivers are ok, I tested it on 2 computers. There is still the same problem. Unfortunately Creative dosn't have after-guarantee service.. So, I tried to open subwoofer, but the inerity is too complicated with many areas flooded with glue or isolation. I tried also to buy another subwoofer / i believe it must have small damage , but the rest of speakers work great and the voice of subwoofer is good as well/ but there is problem with buying a subwoofer separately. Becouse there are only auctions on net.
So , what I supposed to do? Does Creative have separated spare parts to my subwoofer? Can I buy another subwoofer anywhere?
Can I replace my sub to similar from another speakers system and which one would be suitable.
I don't want to change my speakers. They are the best for me, but defect of one chanell is annoying. Really.
I wanted to buy x-fi elite pro ,but now it's pointless.
Please help me
Despere Makary

Hey! I've got the same problem with the same kind of speakers! When im listening to something volume is coming down and after a some time its coming back to its previous level! Coming back to its normal level can be forced by turning the speakers on and off! thats all i've discovered...
i also heard that some of creative speakers have kind of (f**k i dont know the word in english :P ) which works like that: when subwoofer is hot it automatially turns the volume lower to save your speakers from burning form hot :P or something like this :P
hmm... what i discovered that is no matter what i connect as source of music! effect of volume is the same
or maby you discovered the reason of this?
ps.
sory for my very unperfect english...

Have a big problem with report. Very urgent please help

I have a report rep1. When I run the report via batch thru command rwclient to create a file it failed. I got the follwoing error message:
REP-0177: Error while running in remote server
Job 1413 is terminated due to connection timeout.
It does not even try for few seconds before gives this message. I ran some other batch reports whihc took 15 minutes and they were fine.
So, I stopped running the bad report for the day thinking the report is still not dead. I ran the same rep1 next day I still get the same error message. But this time when I ran I looked at the appserver showjobs (which lists the reports that were running and that already ran). The job number is different But still it fails in 3 seconds with the job number 1413 and connection time out. Can any one tell what might be the problem.
Any number of times I run this job I get the same job number with same error (all this is only if I run it as batch using rwclient). If I run this as online by calling it from a form it returns the results without any problems.
Please help. Very urgent.
Thanks in advance.
Asha

You might want to delete the report server .dat file and restart the server and try
his also could be one of the issues we had seen and fixed in 9.0.2.3. Please ensure you have the latest patch applied
Thanks
The Oracle Reports team

Problem with Isight or Photo Booth PLEASE HELP

When ever i take a picture with teapot or spotlights or an other dark picture for the matter It comes out all white and pink kind of. It just looks weird and discollored but only pink and white. Please help me ( ps its only the new ichat effects it has problems with and idk how to delete them their the ones on this website from Ismiley)

Camille2345678 wrote:
http://www.apple.com/downloads/macosx/email_chat/moreichateffects.html
the link above is where i downloaded the effects but im not sure how to uninstall them and it doesnt say on the website. When go find it in Finder it says More Ichat Effects Uninstaller and i pressed it but it brings up like Terminal ( i think its some application) and i dont know where to go from there and most of the other effects work but the dark ones dont. Also i tried turning flash off and it doesnt help.
http://i45.tinypic.com/28twfns.jpg
According to the developer's website:
http://ismileys.free.fr/moreichateffects/support/
".... you can launch iChat and Photobooth in 32 bits only..."
If that does not help you, try uninstalling MoreIchatEffects. I do not use MoreIchatEffects, but, again, according to the developer's website,
http://ismileys.free.fr/moreichateffects/
"If you want to remove all effects, run the installer or remove files in /Library/Compositions"
(1) In addition to the extra effects, it appears that the MoreIchatEffects installer adds an uninstaller application that you say looks like Terminal. You should be able to run the MoreIchatEffects Uninstaller application by merely double-clicking its iCon and following any on-screen instructions.
If you need more help with how to run the Uninstaller than you can find from MoreIchatEffects> Help, you can contact the developer for assistance using the information from this page:
http://ismileys.free.fr/contact.html
Based on the "... check the number of your effects. If it isn't a multiple of 8, it will crash always." comment on that page, you may also want to count the number of effects in your Mac's Library/Compositions folder to be sure that is not your problem. If you need help finding the effects files you are to count, see the next paragraph of this post.
(2) If you cannot make the uninstaller work, note that the "Library/Compositions folder" that contains the effects files you can manually delete is the one in your Mac's startup drive Library/Preferences folder. Look in the "Compositions" folder there.
Do NOT remove any files from either the Library folder in your Mac's System folder
or from the Library folder in your ~ (Home) folder.
(3) If you cannot make either method above work for you, you can use your Time Machine backup from a date prior to the time you installed MoreIchatEffects. For help, see:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/15638.html
(4) If all else fails, your Apple-Authorized Service Provider can help.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Strange problem with motherboard H67MA-E45(B3) =( please help

Hi, I have a strange problem with my motherboard . I have a H67MA-E45 (B3) (MSI-7678) , when i try to update it ( http://www.pcbrain.it/images/stories/msi/H67MA-E45/bios/14.JPG ) , i choose the fourth option "Select one file to update bios" , but the bios did not recognize the update file (E7678IMS.1C0) into the Usb flash drive , but if i choose the second option (select one file to boot) the file is recognized. First I made a backup of the bios, and into the USB flash drive has been created a file called "E7678ICX.162" (my current update). Why the extension is IXC ?!? it should have been IMS ! . I tried changing the file extension "E7678IMS.1C0" (the new update) into "E7678ICX.1C0" and when i select the fourth option , the file is recognized! . Obviously I have not started the update , but if I proceed with the update, changed the name of the extension, is it safe? Or do damage?..please help me :(
P.S. Sorry for my bad bad and very poor english , i'm italian =)

Quote from: HU16E on 28-September-11, 04:38:29
Manufacturer's Website info;
"KHX1333C9D3B1K2/4G 4GB 1333MHz
(2 x 2GB) CL9-9-9-27 1.5V"
Still think there is a batch conflict or possibly a bad stick in the new sticks. Might test each new stick individually for a bad one. Again, the other solution for an 8BG kit may be the new Kingston HyperX PnP's. Could you post a screenshot of CPUID's CPU-Z Memory & SPD Tab for one of the new sticks?
Added: Actually, screenshots of the old sticks Memory & SPD Tab may be of help too. It may be tRAS or tRFC differences between the two kits. Just speculation at this point though.
All the batchs works perfectly...this is the screen http://imageshack.us/f/163/ramkk.jpg/ ...save and zoom
EDIT: The old stick are SLOT #1 and SLOT #2 ...the new 3 and 4

Problems with trial un-installation. Please help

Some time ago i tried adobe photoshop CS4, and used the trial till it expired. About a month afterward I wanted to delete the files from my computer. I was rather unfamiliar with how un-installers worked, and I did not know they existed. I simply went to my finder, typed photoshop, and deleted most of the files. As it turns out, i deleted the re installer, or how ever that works. I recently received photoshop CS4 extended as a gift and I attempted to install it. This was unsuccessful, the first screen that came up with the installer said I still had files from the trial on my computer, and that i should un-install them. I was told by someone who knew more about adobe products that I had to go to utilities to uninstall it . I tried this and it said critical files were missing, and I need to reinstall from the original media. In that last month or so I have found NO solution to this problem, and I am afraid to delete any other files. I could not find any help on the adobe site, and since i have not registered my product( since I have not installed it) i cannot get direct support from adobe. Please help all I want to do is use photoshop and I hate to be wasting the money of the people who bought it for me. Can anyone give me a solution to this mess?

Try downloading and running the CS4Clean Script:
http://www.adobe.com/support/contact/cs4clean.html
Starting with CS3, you MUST use the Adobe Uninstaller that gets installed in Applications/ Utilities/ Adobe/.
Some users who just dragged the Photoshop folder to the trash or deleted files nilly-willy have been forced to back up their drive, wipe it clean, and install the OS and all applications from the original media. You may luck out and get away with just the CS4Clean Script. Good luck.

FTP problems with Airport!!! Please HELP!!!

Hi! I recently found out about my school offering wireless access on campus. I have been using it regularly without any problems until I tried updating my website. I use Adobe Dreamweaver to create and upload pages to my site via FTP. Usually when I am at home I am connecting to the internet via dial-up and everything works fine. But, at school, the FTP will not connect to my site. I have tried disabling the firewall and messing with the Share settings, but nothing seems to work. Someone told me that FTP would not work over a wireless network, but I don't see why it wouldn't! Please HELP!

Someone told me that FTP would not work over a wireless network...
They are wrong.
Unfortunately there is no way we can help you without knowing how the school network is configured. They could have FTP access blocked.

Sound Problems with Mainbord....Please help!

MSI K8N SLI Platinum nForce4 Ultra 4DDR-DIMM 3PCI 3PCIe SATA-II Raid Audio GB-LAN Firewire Socket939 ATX
Hi are having huge problems with my sound.
Got all the gadgets last week. And have built the computer now. Everything is installed, all the drivers i got with the Box.
Now the problem is that the sound i very "crappy". It sound´s like a broken speaker. i have tried with different speakers and the problem persist.
Ive tried changing drivers and all that, and checked all setting. But nothing changes...
I get sound, but it sounds like hell. Cant almost not hear what´s playing or what are said through the speaker.
Is it a hardware problem, something broken on Mainbord??????
Somebody know?
Please help.

Just as a suggestion. . . .
I would remove the soundcard and clean the edge pin connectors. The "static" type sound could be comming from a resistive connection in the edge connector. You may also try running dxdiag from your "start / run" menu and see if the sound results are better.
Also, (even though the sound card is new), you may want to blow out the pin connector in the back of the card (where you plug in your speakers) and try reseating your speaker cable again.
Someone above mentioned power. That could easily be an issue if you have alot of hardware and a power supply that is not up to par with your gear.
EDIT: For some reason, I thought you had a soundblaster card. So, pls forgive the card removal information. just trying to help!
Just some stuff to check. . . GL!
doggy

Problems with Servlet to JSP communication please help!!!

Hello All ,
we have different web applications running
e.g.
We have 2 webApp named A and B are running and there URL are
http://localhost:8080/A and
http://localhost:8080/B
and we have one common WebApp running at
http://localhost:8080/common
Our problem is that whenever a user log in to the system he/she will first call the
common URL and then enter his user name and password
and depending on his username we have redirect user to either A or B with his pasword and username as parameter to the request.
i.e. in common module whenever i get userName and password we call a Servlet to authenticate the user and to detemine which webapp to forward to..
i have to call jsp accordingly from servlet in common webApp to JSP in different webapp.
I m wonderning how it is possilble.
As
i don't know how to call another webApp using
RequestDispatcher.forward () method and
also
i am not able to set paramters with the request whenever i user response.sendRedirect() method
I am wondering what could be the way to pass paramer to the request from servlet in one webApp to JSP in another webApp
Please help its urgent!!!
thankx in advance

forward() can't call another webapp.
There are several ways you could do this.
1) Share the session object across both webapps and set something as an attribute of the session.
2) Use a database or file storage to record the transaction, then go to the second webapp, which picks up that info.

I am having problems with my Pantech Caper. Please Help!

I just transferred my phone number over to a used Pantech Caper that I bought a few years ago. When I used the Caper previously I had no problem with it. And the phone i had before i transferred numbers worked just fine i was just having problems with some buttons not working. Now that i have transferred the number over to the Caper i can receive texts and picture messages but can not download the messages. I can not receive calls nor can i send texts out. after i try to send a text I receive a message saying I have insufficient fund to send message. oh extra info... i have the plan for 500 minutes and unlimited text picture messages and unlimited web. Please Help... I need my phone for work.

Hi YukiCross,
I am confident your issue has been resolved since your original post! If not,let's get this figured out. Based on your description it sounds like you have Pre-Paid service with us. For Pre-Paid assistance please reach out to:888-294-6804 . I can gladly address and resolve any Post-Pay related concerns.
Thanks for your contribution to our community forums,
AyaniB_VZW
Follow us on Twitter @VZWSupport

Problem with Tempo change using factory - Please Help!

Similar Messages

Maybe you are looking for