Problem with tethering D700 - slows down: 'Transfering images...'

Hi,
I have a problem when working tethered. Previously I had no or hardly any trouble but as far as I know nothing has changed.
The problem is (also when I have no CF card in my camera) that all of a sudden I get 'transferring images from camera' and lightroom then is fully occupied doing that. It is a big problem because I cannot work lik that in the studio.
Please advice bcause it is driving me mad...
Leon

Hi Weixuan,
I recomend taking an unneccesarily process out if the loop for example: IMAQ Create, IMAQ Read File, IMAQ WindSetup, IMAQ Dispose, IMAQ WIndClose.
You may refer to my attached screenshot to see how I modify your program.
I can achieve the same task at 17ms interval with <30% CPU consumption.
Regards, Kate
Attachments:
weixuan.PNG ‏16 KB

Similar Messages

HT4199 Had problems with my broadband going down at weekend, since it came back on unable to join wifi BT say it is because my wifi settings are missing on my iPad can anyone tell me where to find seething details IP address etc

Had problems with my broadband going down at weekend, since it came back on unable to join wifi BT say it is because my wifi settings are missing on my iPad can anyone tell me where to find seething details IP address etc

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

I have problem with this add-one "down them all" , Recently it doesn't show me Size of files !!

I have problem with this add-one "down them all" , Recently it doesn't show me Size of files !!
also regular download doesn't show my any thing !! and I can not even resume my files ....
i know these are direct links and i should be able to resume my downloads any time ( i have this option before )

If an extension isn't working properly then you need to take this up with its developer.
*http://www.downthemall.net/

Is anyone having a problem with adobe being slow?

is anyone having a problem with adobe being slow?

Adobe pro XI; it takes 20 seconds to go to the next page or even longer to open.

Problems with tethered capture and the 4.2 update

I'm having problems with tethered capture and my canon 1ds mark III since I updated to 4.2. Is anybody else having issues with tethered capture that was working fine before the update?

http://forums.adobe.com/community/search.jspa?peopleEnabled=true&userID=&spotlight=false&c ontainerType=14&container=3316&rankBy=date&q=4.2+tethering

Problem with unstable and slow SWFs

Good evening,
Some of my users are reporting problems with the SWF output of my intensive Captive file which includes significant software simulation. I knew that these files were going to be resource intensive due to the nature of the project, but I felt comfortable with system requirements of at least 2 gb RAM and a mid-range processor.
Unfortunately, some of my users who meet this criteria are reporting problems including text animations not playing in full and slow slide transitions. I cannot replicate this problem on any of my machines.
I have been playing around trying to compress images as much as possible and otherwise reduce file size. What else can be done? What are the top five things I can do to remedy this problem?
My presentation is about 50 slides and the SWF output is about 4.5 mb.
Thanks

I've seen this type of thing many times, especially in corporate environments.
My top suggestions:
If you've taken all reasonable steps to make your project as web-friendly as possible by this time, don't make any more changes to your project until you've exhausted the possibilities below. It is most likely NOT your project that is at fault.
Find out more details from the users that are complaining. If at all possible, actually go and sit with them to watch the behaviour they're talking about. Don't believe everything you hear.
Check that users are on the correct version of Flash Player. For example, Flash Player 10 can play significantly better than Flash 9.
Ask the user to check defragmentation on their PC. Most users DON'T know how to do this and never defragment. As a result, I have seen PCs in corporate IT environments that had not been defragmented in years. Their hard drive showed up mostly red when the fragmentation analysis was done. This lack of PC housekeeping can contribute to many issues, especially with Flash or multimedia playback. Ask the user to defragment 2 or 3 times to be on the safe side.
Watch the CPU on Task Manager while the PC is playing the Captivate presentation. The performance monitor should tell you if the CPU is struggling and unable to decode the content fast enough.
Try to have another user log onto the same machine using a different profile and see if they experience the same issues. This can tell you whether the issue is due to a corrupted user profile. Conversely, have the same user log onto a different machine, creating a new profile for themselves on that PC to see if they experience the same issue. If it seems to be their profile at fault, they may need to get some IT dude to blow away their profile and set it up afresh.
Check whether or not the issue could be due to server latency. This is especially the case where LMSs are involved. Users will often experience latency issues such as slow transitions from one quiz slide to the next because the course module has to wait for the LMS to respond before it can move forward. If this is occurring for a significant number of users, you can try using the optional SCORM template that only sends tracking data at the end of the module instead of all the way through.
In my experience, if 95% of your user base is playing the content without issue, you don't need to change anything. Chances are that whatever is going wrong for the few that are complaining about poor playback wouldn't necessarily improve no matter what you did to your project. In the vast majority of cases, you need to isolate what exactly is causing the issue for these users and correct it ON THEIR END.
Rod Ward
www.infosemantics.com.au
UPDATE: I just realised that a lot of this information would probably help others, so I created a blog post documenting these steps: http://www.infosemantics.com.au/debug_slow_playback

Execute Case Structure with Button Press Slows Down VI

Hi -
I'm fairly new to LabView, and I am having some issues with using a button to run a timed while loop.
I am writing a VI that outputs a timed voltage pulse to an output channel on a DAQ; meanwhile, the VI reads and graphs the voltage on three input channels on the DAQ. When I use a timed loop that automatically executes when the VI runs, the program works. However, I would like to include a button so I can control the timing and number of voltage pulses sent to the output channel, instead of sending only one voltage pulse each time the VI runs. I have tried to do this using a button wired to a case structure. If the button is 'true,' the VI should send the voltage pulse. If the button is 'false,' the VI should keep the voltage at zero.
When the button is 'false,' the VI runs normally; however, when the button changes to 'true,' the VI slows down and never sends the pulse. Why does this happen? How can I fix it?
Also, how can I send the voltage pulse only when the value of the button changes? I only want the timed loop to execute once when the button changes value.
Thanks for any help or advice!!!
Attachments:
Sensor Read6.vi ‏85 KB

The graph is in the same while loop as the case structure. The while loop won't iterate until all the code inside of it has completed. So the graph only gets updated once, and won't update again until the while loop iterates again. If you need more continual updating you may want to put that in a loop that executes a couple of times, or completely separate your code into 2 while loops. Is it that long of a wait considering your pulse length is 1 second?
Your analog output code is just writing a voltage out (7 volts) until it eventually writes out 0 volts. There is no reason for it to drop down unless you have some sort of electrical problem between your DAQ device and the device on the other end that is reading the 7 volts. What are you connecting that analog output too?
What if you don't use LabVIEW and try to test out that analog output using Measurement and Automation Explorer? Does it do the same thing?

Problem - digital trigger edges slowing down on fast rotations

Hi, all. I have problem to figure out. I want to measure strain with two strain gages on 90 degrees (NI 9237 Half Bridge II) and I have motor with metal plate on it with 52 tooth (gear) to measure on every tooth the strain. For rotation I use NI 9401 digital input.
I need for example 1000 samples from first digital edge to second. ( on metal plate). I try start trigger. In slow speed (turn around with hand) of metal plate everything is OK. But if I turn around metal plate fast digital trigger edges slowing down. For one cycle on metal plate on slow speed cout me 52 digital edges 1000 sampels per edge (metal plate is with 52 tooths), but on fast speed count me 25 edges. Is that problem coming from syncronise of digital input and analog input. I made example with DAqmx express Vi. I set up on Digital imput and then count me every tooth independently from speed and everything is OK, but when i buid trigger for strain on fast rotation speed trigger edges slowing down.
Can anyone help me with that?
Thanks previously.
Attachments:
Count.jpg ‏315 KB
Count2.jpg ‏262 KB

It looks like you are collecting 1000 samples at 10000 samples per second. That takes 100 ms. If your trigger edges occur faster than 100 ms apart, some of them will be missed. If you are rotating your toothed plate with 52 teeth faster than one cycle every 5.2 seconds, some of the triggers will occur before the previous data collection is finished.
What is the fastest speed that you will sping the metal palte?
Lynn

Speeding up and slowing down still images

I still am unable how to figure this one out. I have found a slider bar under the art/clip. I right clicked, turned on time graph, moved this points around and still see no difference in sppeding up or slowing down. I am in the right place, close? In the motion window I see Time Remap, see points have changed but am unable to move this points from here, I can move other points like scale, rotate. In Time Remap I see a speed section but this is greyed out at constant speed.
I want to be able to have a still begin or end with a speed up or slow down as I pan or zoom.
Any suggestions?
~Mark

New Discussions ResponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
Shane

GE60 fan problem. speeds up and slows down constantly [EC reset done]

My model is GE60 OCN and bios and EC is the newest ones for win7 embeded on msi website.
I have the same problem with others if you search here 'ge60 fan'.
The temperature between 50~60℃ the fans runs slow and really quite.
But if the temperature goes down under about 46℃, it speed up and slows down constantly and it is annoying and much noiser.
I think msi should provide new EC firmware for this. Even the temperature is low, it annoys and nosier than when the temperature is between 50~60℃.
Please check this problem and provide new EC firmware for fan policy.
Someone has uploaded video link: youtube.com/watch?v=OQjjjVOpsEQ
this is exact problem with me as well.

I have exactly the same problem. Let's continue in the other thread (https://forum-en.msi.com/index.php?topic=165613.0)

I'm working on my iMac PowerMac8,2 PowerPC G5 (3.1) 2 GHz machine and have been having problems with the computer shutting down unpredictably. After the problem becoming impossible to work with, I shut the machine down. Now a little better, but reoccuring

I'm working with my iMac PPC G5, PowerMac8,2, 2 GHz machine running OS X 10.4.11, and was having a problem for a while with the machine shutting down unexpectedly. There was no clear pattern to when it was shutting down as far as I could tell. For a while, it would also not restart when buttoned on.
I set the machine aside for a while, probably a month or more, and then got it back out after its rustication. It started up and runs significantly better than it had been, but I have noticed it shutting down sometimes now again, though not as frequently as before. Sometimes it runs for a good long time between active work, sleep mode, and active work again. Once in a while it does shut down when no one is working on it (while asleep). But now it always restarts when buttoned on.
I've done the thorough vacuuming of any dust from the unit vents. I wonder if there's anything else I should try. In most other ways the machine works pretty well and has become the family desktop for basic uses, so I'd like to keep it running if I can. A little frustrating to not be able to upgrade all programs (iTunes) to useable versions, but that's another story....
I would appreciate any ideas about the shut down problem.
TCC

Option 1
Reset your PRAM. Press and hold down the Command Option P R keys while starting your computer. You will hear the startup chime. continue holding down those keys until you hear the startup chime a second time. Release the keys. If the computer restarts, you will need to reset your Date and Time. It might be time to replace your PRAM battery. The G5 iMacs require a 3 volt CR2032 lithium watch/camera battery like below:
http://eshop.macsales.com/item/NewerTech/CR2032/
You can find these batteries at Walmart, Kmart, Target, most local drugstore chains, for between $3-$5, or at Radio Shack for $12-$20.
If you have any G5 iMac model EXCEPT the iSight version, you can probably do the battery install yourself. Watch this video on upgrading your iMac's RAM to show you how to remove the back of your iMac, if you don't already know how:
http://eshop.macsales.com/installvideos/imac_g5_mem_m/
While you have the back off, use a can of compressed air to blow the dust out the vents at the bottom of the iMac, the fans, and anywhere else you can. Also inspect the 28-30 capacitors on the logic board. Look for dark spots, if they look puffy or swollen, or leaks.
Option 2
Reset the SMC by removing all cables (USB, Firewire, Ethernet, Modem, Power cord) from the back of your computer. Let it sit for one minute. Press and hold the power on button on the back of the iMac while plugging in the power cord. Release the power on button. Count to five, the press the power on button again.
Option 3
Place your original, came with the iMac when purchased install disk, into the slot on the iMac, press and hold the C key while pressing the power on button on the back of the computer. (If you have upgraded your OS from when you purchased your iMac, example your iMac came with OS 10.3 installed, and you're now using OS 10.5, then use the OS 10.5 Retail Install disk that you had used to upgrade your OS instead of the original, came with the iMac disk.)
Continue holding the C key until you see the OS starting to load. DO NOT do an OS installation. At the top Menu bar, select Utilities or Utility, and pull down to Disk Utility. On the left side of the window that opens,select your normal OS drive. Click First Aid at the top middle of the window if it isn't already selected. Click Repair Disk from the lower right area of the window. When that is done, click Repair Permissions to the left of the Repair Disk button you clicked earlier.
When that is done, quit Disk Utility. From the top Menu bar (I think its under Utilities) select the Start Up Manager, and choose your normal boot volume as the startup disk. Restart the computer. If successful, and you've rebooted from your normal startup disk, eject the install DVD/CD, and you're good to go.
Good luck.

Problem with Alt Text output from thumbnail image of Lightbox widget

I’m having a problem with the Lightbox widget not producing alternative text based on the image properties. I’ve set ALT text for the image properties on both the larger Ligtbox image as well as the thumbnail. But the HTML output from Muse does not include the ALT text on the thumbnail version of the image. Here’s an example:
    <div class="popup_anchor">
       <div class="Thumb popup_element clearfix" id="u4409">
        <a class="anchor_item grpelem" id="untitled"></a>
        <div class="grpelem" id="u4433">
         <img id="u4433_img" src="/images/n0060292x292.jpg" alt="" width="292" height="292" />
This may be a problem that came in a previous release of Muse. I have a few older examples where ALT text is produced, but it’s no longer updated if I update the Image Properties.

I'm seeing the same problem. Looks like a bug to me. Any ideas as to how we can get this on Adobe's bug fix list?

Problem with restoring my HDD from .dmg image

Hello,
I encountered a problem with boot camp which couln't make a new partition for windows, because it couldn't move some files. It was a problem of defragmentation which i found surprisingly hard to solve. I'm a new mac user, and i was unable to find any defragmentation utility. Even the boot camp ask me to make and image of HDD, reformat it, and then restore from image. It was quite easy when i was reading it but after all i end up with new instalation of MacOS X without access to my files stored on HDD image.
Here's what i did:
1. I made images of HDD and and partition. To make images smaller i previously copied all of my multimedia files to PC. Images were created as read only, not compressed. They were stored on PC
2. I have used disc utility after booting up from MacOS X CD, and made a new partition. It's name is the same as the one i made image from.
3. Now it's the point when i should restore my partition from image but i encountered some problems. I copied images to mac again and was trying to restore partition from it but disc utility said it doesn't have any checksums or something like that. I read that it was a problem of verifying image with disc utility (the first button on the upper left side called verify.) It have checked image and made checksums but i still was unable to restore partition from it.
Now, i know it might be silly to try restore HD from image on the same HD but shouldn't it shows some oder errors? After booting up from CD i can't connect to PC to browse it's resources and writing address (http://pcname/folder/partition.dmg) in source line in restore tab does not do anything.
Is the only solution to connect a firewire hard drive to my mac with images on it? Or it is a problem with my images (making image process didn't showed any errors with HDD image and partition image).
Moreover i cant access those images on my MBP cos it's says that there are no mountable file system. Does it means that this image is bad?
Please help, I'm running out of options as i don't have firewire HDD and i'm really annoyed cos things like defragmentation are so easy on Windows and i don't get it why it's must be so complicated on Mac
Sincerely
PS sorry for my english
Message was edited by: pazera

*It said that my image don't have scan information and it needs to be imagescanned.

Problems with Second level drop downs

Hi, I'm having problems with the second level of my drop down
menu. It's showing up when you hit the first level. Any ideas what
I'm doing wrong?
http://www.graphicvisionsinc.com/test/

Solved it!
For info, updating from FCS 1.1 to FCS 1.1.1 solved this problem!

Problem with tethering D700 - slows down: 'Transfering images...'

Similar Messages

Maybe you are looking for