Problem With Text Box

Hi, All
I created a normal frame by overriding method SetBoundingBox in CPathCreationTracker, then converted that frame to the text frame.
In the BeginTracking method of the CPathCreationTracker, I activated text tool on double click event of Text frame using the SetActiveTool method.
but the blinking cursor doesn't appears after double click it appears after clicking thrice.
What code should I add to work this? any help is appreciated. 
Thanks,
Praveen

Yes, I know, and everything is fine. If I try any blank template, without my intervention, the result is the same. Only for the template Darkroom and only at sites welcome reader finds the text. When I change it any way but, all is lost. I also completely erased iWeb and re-installed. Nothing helps. I have about 50 templates and no work.

Similar Messages

  • I'm having problem with text boxes.  Whenever i hit the enter button to start a new line or paragraph, the cursor doesn't drop down to the next line.  Instead i get this little red + sign in the box.

    I'm having problem with text boxes.  Whenever i hit the enter button to start a new line or paragraph, the cursor doesn't drop down to the next line.  Instead i get this little red + sign in the box.

    You are absolutely right.  Thought Enter meant Enter.  I was wrong.  Thank you for the help.
    Rod Rogers, Broker
    Accredited Land Consultant (ALC)
    Metcalf Land Company, Inc.
    Office: 864-585-0444
    Mobile: 864-316-0297
    Fax: 864-583-6000
    <http://www.metcalfland.com> www.metcalfland.com

  • Problems with text box borders, tabbing and saving doc in Acrobat Pro 7.1.0

    When I view my form document in Acrobat Reader, there is a red border around several text boxes
    in which I've selected 'NO border'
    Also, I've selected 'column order' for tabbing, but tabs continue to function in order in which I inserted form item (text box, check box or radial button). Since I didn't insert these consecutively, tabs no jump all around the form instead of proceeding in order from top to bottm and left to right.
    I've checked for Mac Acrobat Pro updates and see that there are three  - 7.1.1, 7.1.3, and 7.1.4, and am downloading them for install.
    Do any of the updates fix these problems? Or how can it be fixed?
    On opening document in Reader, I also get a message informing that document cannot be saved with changes and must be printed, even though I've created it with fillable forms.
    Is there some setting for allowing document to be saved?
    I want to be able to have recipient be able to download form, fill it out, save changes, attach to email and return it to me.

    This has been a problem since version 8 on the mac. Acrobat 7 on the mac worked fine with the right side trim but not on the PC.
    We are still having this problem with Acrobat 9.4.0 on the Mac & PC.
    This has now been an issue for 2 versions of Acrobat Pro.(8 & 9)
    Being in Pre Press and having to constantly set the trim for jobs, this is now taking up too much time and costing money.
    Please fix this Adobe.
    and on another note. how hard would it be to display the trim (if set) next to where the page size is?
    If the trim is set it should display it! why should we have to go to document/crop pages>trim.
    Im in a busy Pre Press Dept and the amount of times you have to check a trim size is stupid.
    I always set prefs to display crop / trim / and bleed boxes and this helps but it should display it if its set.
    Thanks
    Hope this is resolved soon.

  • Error With Text Boxes in Acrobat 9 Pro

    I have a number of 9 Pro installs that are experiencing problems with text boxes.  The will enter text then attempt to save the changes and Acrobat will crash.  Other errors we have been receiving are  "invalid annotation object" and "R6025 pure virtual function call"  any advice would be appreciated.

    In the properties of the callout comment you can change the fill color.

  • Solved: InDesign CC: Problems with text in text box: text flows around invisible object

    I just upgraded from CS4 to CC. I have two problems with text in some text boxes:
    The text seems to flow around invisible object that I cannot find or delete. It's as if there is a photo or other object behind the text box; but when I press COMMAND-a to select all, I don't see any such object.
    When I move this text box, the layout of the text within changes. For example, when the box is high on my spread, the text flows correctly within the box; but when I move it down, it flows around that hidden other object. For another example, when the box is low on the page, the text starts at the top of the box; but when I move the text box up, the text starts somewhere in the middle of the box.
    I have checked margins of the text box and the paragraph options of the text paragraphs (margins, indents, alignments). They all look OK.
    If I modify the text box, checking the box "Ignore text wrap", then the problem goes away; but then the text also will not flow around a real object that I want it to flow around.
    Solution:
    There were objects in a hidden layer on that one spread. It seems that in CS4 when you "select all" you would also select objects in hidden layers; but in CC it doesn't.

    Arthur, Garry
    Would be great if you could send the files as attachment in an email to [email protected]
    Else, you may post here using these steps: http://forums.adobe.com/message/3994281
    Thanks!
    - Neeraj

  • I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoint​s along with text box. Can anybody help me in this? Thanks.

    I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

    Thanks for you reply.
    But actually I don't want to show the \ (backslashes) to the user in my text box. 
    Ok let me elaborate this problem little more. 
    I want to show my text box as it is in normal editors e.g. In Matlab editor. There is a text box and on left side the gray bar shows the line numbers corresponding to the text. Further more i want that the user should be able to click on any line number to mark specific line as breakpoint (red circle or any graphical indication for mark). 
    Regards,
    Waqas Ahmad

  • Issue with 'text box' in rtf sub template for peoplesoft XMLP

    Hi all,
    i have a weired problem using 'text Box' in a sub template. I am calling a sub template from my template. In my Sub template i have a text box ( i am using text box bcoz i want to justify the text not to the page margin but starting from a specific column.not sure if there is any other way with which i can do the same !!) . When i process the report (using application engine program) i get the below error
    Message Log entry:
    [052311_071441208][oracle.apps.xdo.common.xml.XSLTWrapper][ERROR] XSL error:
    psxmlp://SUB_BMX2<Line 63, Column 191>: XML-22031: (Error) Variable not defined: '_MR'.
    @Line 63 ==> </xsl:stylesheet>
    [052311_071441216][oracle.apps.xdo.template.FOProcessor][EXCEPTION] java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
         at java.lang.reflect.Method.invoke(Method.java:618)
         at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(Unknown Source)
         at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
         at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
         at oracle.apps.xdo.common.xml.XSLTWrapper.transform(Unknown Source)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
         at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
         at oracle.apps.xdo.template.FOProcessor.createFO(Unknown Source)
         at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
         at com.peoplesoft.pt.xmlpublisher.PTFOProcessor.generateOutput(PTFOProcessor.java:74)
    Caused by: oracle.xdo.parser.v2.XPathException: Variable not defined: '_MR'.
         at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1534)
         at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:521)
         at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:489)
         at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:271)
         at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:155)
         at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:192)
         ... 13 more
    [052311_071441218][oracle.apps.xdo.template.FOProcessor][ERROR] End Memory: max=64MB, total=11MB, free=1MB
    PeopleTools 8.49.27 - Application Engine
    Copyright (c) 1988-2011 PeopleSoft, Inc.
    All Rights Reserved
    Processing started
    data extraction for EMPLID:1000646332 EMPL_RCD:0 EFFDT:2009-12-28 and EFFSEQ:6
    CFilem::LoadDefn(RDCRHIUTEECKNDZN2SPSRQ) : read 1 chunks
    UnchunkStuff : read 1 chunks for nCharDataLen 10520 chars
    CFilem::LoadDefn(RDCRHIUTEECKNDZN2SPSRQ) : after decode & decompress: 35330 bytes
    Calling XMLP
    Processing Report Defn:TR_BMX2
    Error Executing XMLP.Error generating report output: (235,2309) PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:ProcessReport PCPC:51952 Statement:1163
    Called from:TR_LATAM_CONTRACTS.ContractsXML.OnExecute Name:ExecuteXmlp Statement:16
    Called from:TR_LAMCNTRCT.MAIN.GBL.default.1900-01-01.Step04.OnExecute Statement:20
    Process 442706 ABENDED at Step TR_LAMCNTRCT.MAIN.Step04 (PeopleCode) -- RC = 22 (108,524)
    Process %s ABENDED at Step %s.%s.%s (Action %s) -- RC = %s
    It works fine when i remove the text box from my sub template. I tried to put the text box directly in the main template and it worked fine !! it is erroring out only when i use the text box in sub template !!
    Template file:
    <?import:psxmlp://SUB_BMX2?>
    <?choose:?>
    <?when: .//LETTER_CD=”PA4”?>
    <?call: BA101?>
    <?end when?>
    <?otherwise:?>
    Invalid Letter Code. No Sub Template Call defined for this Letter Code.
    <?end otherwise?>
    <?end choose?>
    Sub Template:
    <?template:BA101?>
    Testing without text box.
    Testing with text box
    there is a text box with text here .. cannot be copied from word !!
    <?end template?>
    i got the below error when i tried to 'preview' the report from my report definition.
    Error generating the report output: During calling method PTFOProcessor.generateOutput, the XDO engine throws an exception:NULL. (235,3101) (235,2309)
    Error occurred during the process of generating the output file from template file, XML file, and the translation XLIFF file.
    Any help would be greatly appreciated.
    Edited by: Naveen Kumar on May 23, 2011 4:31 AM

    misunderstood =/
    Original (Coming - output):  "<PAY_TXT>PAYκ Contact your bank or financial institution to make this payment from your cheque, savings, debit or transaction account.</PAY_TXT>"
    it's in output but what is data in database ?
    sorry but without knowing about source data for forming the xml i haven't ideas about your problem
    in db it's "TM " or "™" or ... ?
    Original (Coming - output):  "<PAY_TXT>PAYκ Contact your bank or financial institution to make this payment from your cheque, savings, debit or transaction account.</PAY_TXT>"
    Something like XAE or "K" after PAY Value in the xml tag and continued the text value.  (Tag value is not getting copied exactly here - i am sorry for that )
    that's ok. i need to see the problem not the data as is
    Expected (output):  "Here it needs to produce the "PAY TM" (Here "TM" should be super scripted to "PAY" Value in tag).
    as super scripted in xml?
    as idea - you can have <PAY_TXT>PAY TM</PAY_TXT> and in publisher set TM as super
    Designing XSL Subtemplates - 11g Release 1 (11.1.1)

  • ID CS5: Problem with Text Wrap being Forgetful :(

    I am having a problem with text wrap. Whenever I open this INDD file I am working on now, some of the images shift from having what I call "actual" text wrap to having "false" text wrap. "Actual" text wrap *actually* wraps the text around the image as it is supposed to; "false" text wrap says that "Wrap Around Bounding Box" is applied to the image yet no text is wrapped. After opening the file, making sure to unset and reset the text wrap on each offending image to show an "actual" text wrap WITHOUT changing layer order, saving the file, closing, and reopening, some images have "false" text wrap again! This is a 77 page document with images on every page.
    Another occurrence is if I largely change the flowed text. If I must remove a paragraph on page 7, for example, then the "actual" text wrapped images on page 10, 12, and 18 change to "false" text wrapped images and I have to reset the text wrap on each image. There are often images in between offending ones that DO NOT change, but it doesn't seem to be the same ones each time. So once image A, C, and D will change to "false" text wrap, while B, E, and F are fine; the next time, A, B, and F are wrong and the others are fine. This is driving me crazy as I have never in 8 years of using InDesign encountered a problem using Text Wrap. Please note:
    Ignore Text Wrap IS NOT selected.
    The text box IS below the images.
    The copy is flowed throughout the document.
    Preferences>Composition>"Text Wrap Only Affects Text Beneath Selected"" DOES NOT FIX IT.
    "Wrap around bounding box" IS showing as selected for the image/images.
    There is NO CLIPPING PATH / PHOTOSHOP PATH / ALPHA PATH on these images.
    The images / text box order is not changed between being correct and being incorrect.
    Anyone else with this trouble? And, if so, how did you fix it? Thanks,
    A. Henson
    InDesign 7.0.3
    iMac i7
    8GB RAM
    OS X 10.6.6

    @henson26,
    I emailed you offline to see if you can provide me with an example file that shows the problem.
    Matthew

  • I have created a .pdf form with text boxes, but the recipients are unable to fill in their answers.

    How can I distribute a form with text boxes so that the recipients are able to type into the boxes?

    This forum is for the Adobe FormsCentral (formscentral.adobe.com) which is a service that allows you to create, collect and analyze data using an online web form. You should ask PDF related form questions in the Acrobat forums: http://forums.adobe.com/community/acrobat/forms
    I'll move your post to that forum so you don't need to retype it. They can help you out...
    Randy

  • I created a 5x7 postcard document in Word with text boxes and graphics.  When I converted it to PDF, some of the items were missing, even though they were in the boundaries of the page and looked fine on the Word document.  What happened, and how do I fix

    I created a 5x7 postcard document in Word with text boxes and graphics.  When I converted it to PDF, some of the items were missing, even though they were in the boundaries of the page and looked fine on the Word document.  What happened, and how do I fix it?  I'm trying to upload the PDF version to Vistaprint.  Thanks.

    Reader doesn’t create pdf files. You can use Acrobat (ask in that forum) to create pdfs. You can subscribe to the Adobe PDF Pack which has a create pdf functionality (please ask in that forum), or you can use a third party utility such as ghostscript, cutepdf, or Microsoft’s own PDF creation capability. For third party pdf creation you will need to ask in a forum dedicated to that software as fellow users of Reader are unlikely to have the knowledge to help.

  • Having problems with texts width when viewed in Firefox

    I My site is OK when viewed in Chrome and Safari, but in Firefox, the width of paragraphs is becoming very long and all is displayed wrong.
    I need a clue where to look to fix. I have not , or very little knowledge of HTML code. So I rely on the DW CS5 interface.
    Thanks,D.

    Thanks Nancy ,
    I'll try,
    Should I just paste your info between the brackets, I guess.
    I am not so good with this but I need to spent a bit of time to fix this
    old web site while another one is being designed.
    Yes the images are too big, I'll reduce them, and optimize. This was
    done in a rush..
    D.
    Le 14-02-23 18:07, Nancy O. a écrit :
    >
          Re: Having problems with texts width when viewed in Firefox
    created by Nancy O. <http://forums.adobe.com/people/Nancy+O.> in
    /Dreamweaver support forum/ - View the full discussion
    <http://forums.adobe.com/message/6149874#6149874

  • Problems with text in iWeb publishing much larger, or smaller than in iWeb (it is insane)!

    More than a year ago I had a problem with my iWeb not publishing correctly: links to other websites would not open in a separate window as designed in iWeb. I got help from an AppleCare techie and after he did a lot of tests, he concluded I had a corrupted Domain file (which became apparent after I upgraded to OS Snow Leopard).  I don't remember if I discussed with this techie another problem I had been having for as long as I had used iWeb, and that was "exploding" text: certain words, often italicized, would be huge, after publishing, relative to the surrounding text.  Sometimes certain words, or sentences would be smaller than designed in iWeb.  Through trial and error I would sort of solve these problems by enlarging text boxes, or making the offending word or phrase one text point smaller.  Sometimes deleting the text box entirely, and starting over would work.  And then there are the weird things that happen when my wife opens my website in Internet Explorer: things that make no sense and seem to be totally out of my control.
    So, I've spent a long time rebuilding my website in this supposedly uncorrupted Domain file, and today I finally finished and published to my hard drive, checked it out, and the "exploding" text is there with a vengeance.  So much so that I may just stick with my original ("corrupted") Domain file, the text problem on this new one seems even worse than the old one.  Anyone had this problem?  I meant to ask this question years ago, but got a bit lazy.
    Another question is: I've heard Apple is going to discontinue iWeb.  Despite my problems with the program, I rely on it.  What are the options going to be for iWeb users?

    Well you heard wrong didn't you!
    Apple is discontinuing MobileMe, which is the hosting in favour of iCloud services which will not contain any hosting.
    iWeb is an app and as far as we know you can still continue to use it - it will still work so carry on using it if you are happy with it.
    If you want to look at other alternatives to iWeb, then others suggest RapidWeaver and Sandvox as being closer to iWeb - both are available via the Mac App store.
    Also Freeway Express and Flux 3 are worth looking at - more design freedom and you are not restricted to templates as with RapidWeaver.

  • Please help with text boxes

    Can somebody help me wit hmy problem. I have a fom with many tables in it, some cells of the table are text boxes or at least they were when I developed it. Now I need to edit some of the cells and for some reason I cannot do it as the cell is not a text box but became (untitled<draw>) I cannot change its type back to text. Can some one advise what to do whitouh retyping text again in the new cell.
    Many thanks in advance

    You are welcome!
    I have a preference for Javascript (just get in the syntax zone) and use it for most things (except dates).
    As you know:
    this = current object
    rawValue = accesses the value of object
    From an Excel point of view FormCalc is similar and has inbuilt function like sum(), Max(), etc. Syntax is $ for current object and you don't need the rawValue. This is very handy when summing a column in a repeating table. Also FormCalc is excellent for working with time and dates. (not that you can't work around in Javascript, but it is heavier).
    Adobe have a very good reference for FormCalc at http://www.adobe.com/go/learn_lc_formCalc_82 and I would recommend that to you. I think it comes from the LC help file, but is easier to use.
    From a performance point of view, you can either have FormCalc in the calculate event of an object, which looks back at other fields (this will fire each time one of these fields changes). Alternatively you can have the FormCalc in the exit event of a field, which pushes a calculation/value forward to another object.
    Functions are handy if you have a script that you are using several times in a form. You write the script in a "script variable" and then call it in the objects events. HOWEVER, script variables are available in Javascript only.
    One last thing is that if you have a constant (like VAT), then rather than including  "* 0.21" in all of your calculations, use a global variable in the Form / Properties / Variables tab. currentVat = 0.21. Then in your calculations would be "* currentVat.value". If the VAT rate changes then you only have to change it in one location.
    In summary FormCalc is more akin to Excel; just watch the syntax.
    Good luck,
    Niall

  • Problems with text to .PNG

    So after searching through all the forums about this problem, and chatting on the telephone with Apple about I have noticed a few consistencies.
    1. People who are saying that you can get rid of the problem by switching to a common font or dropping shadows are correct but only if you are inside an iWeb automatically generated text box.
    2. If you use the template "blank" to essentially start each page from scratch, all of your text boxes that you insert will be .png format. If you dont believe it, check yours by right clicking over the text boxes in a page that you have started from a blank sheet. Right click over the text area and it will tell you the size/type depending on which browser you are using.
    So, How can you get around having to fit into the little box that iWeb wants you to be in (or at least make it look like you want it to?) and how can you use 'blank' templates without this problem?

    I still am having the problem as far as I can tell but I did notice in one of the other discussions that there was a possibility that it could be triggered when the text box is not aligned with the other features in the site.
    I am going to try that out and see what happens.
    Thanks for your time and effort in looking at how you have been creating your sites but for me, simply changing the text to a different font did not make a difference. I will double check on the opacity thing but I am pretty certain that is not the case. I even tried pulling the text out and converting it to straight text format (not RTF) and then re-inserting and no luck. I did put together a page that was very much in the little box of mac appearance and it did not have that problem but I remember specifically having all the boxes aligned using the snap to grids that the program creates. I am thinking that I should have a response sometime soon from apple since they were on the phone wiith me for over an hour yesterday and did fix one other problem that I had after our conversation ended. They are on skeleton crew until after the holiday and it is not a huge emergency since it is only a web site and it does still work fine if you are on broadband anyway!
    Please keep potential solutions coming. FWIW I am running MS Office on my Mac so perhaps that is the root of the problem but I doubt it.

  • Problem using text boxes as the "image" to drag and drop over audio file

    I have been adding audio files to my page in iWeb (previous version, not '08), but I am having a problem giving them titles.
    When you first drag a file from iTunes into iWeb, it provides a space for you to drag and drop a picture. The online iWeb guide also says that you can drag a text box there instead of a picture.
    I created a text box with the text I would like to drop over the controller. However, it is no longer allowing me to drop the text box there. I used to be able to do this, and I don't know what I'm doing differently now. Any suggestions?
    Thanks!
    -- Will

    foobar2000 with the ipod plugin will allow you to drag/drop FLAC files and when it syncs the ipod, it converts the FLAC files on the fly. MUCH better than dealing with the crappy iTunes interface and having to pre-convert the files. I absolutely loathe iTunes and it just gets worse and worse!

Maybe you are looking for