Problem with text in Brush Stroke motion menu

Hi, I am using the Brush Stroke motion menu, which is designed to have the text within the brushstoke appear gradually as the brushstroke moves across the screen. That worked fine, until I went to change the color of the fonts. Something happened, and I ended up re-typing in the text, but now the text appears in complete form before the brush stroke even starts. Not nearly as nice looking. Is there a way to get back to having the text appear as the brushstroke moves?
Thanks, Bob

Just guessing!
I would suspecty a race condition. Most likely the signaling event gets triggered before the other locals receive their respective values.
Use a "one frame flat sequence" around all the locals, then feed the wire containing the "Position: X-axis" out the right edge and wire it to the signaling property outside of the sequence. This ensures proper order.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

Solved: InDesign CC: Problems with text in text box: text flows around invisible object

I just upgraded from CS4 to CC. I have two problems with text in some text boxes:
The text seems to flow around invisible object that I cannot find or delete. It's as if there is a photo or other object behind the text box; but when I press COMMAND-a to select all, I don't see any such object.
When I move this text box, the layout of the text within changes. For example, when the box is high on my spread, the text flows correctly within the box; but when I move it down, it flows around that hidden other object. For another example, when the box is low on the page, the text starts at the top of the box; but when I move the text box up, the text starts somewhere in the middle of the box.
I have checked margins of the text box and the paragraph options of the text paragraphs (margins, indents, alignments). They all look OK.
If I modify the text box, checking the box "Ignore text wrap", then the problem goes away; but then the text also will not flow around a real object that I want it to flow around.
Solution:
There were objects in a hidden layer on that one spread. It seems that in CS4 when you "select all" you would also select objects in hidden layers; but in CC it doesn't.

Arthur, Garry
Would be great if you could send the files as attachment in an email to [email protected]
Else, you may post here using these steps: http://forums.adobe.com/message/3994281
Thanks!
- Neeraj

ID CS5: Problem with Text Wrap being Forgetful :(

I am having a problem with text wrap. Whenever I open this INDD file I am working on now, some of the images shift from having what I call "actual" text wrap to having "false" text wrap. "Actual" text wrap *actually* wraps the text around the image as it is supposed to; "false" text wrap says that "Wrap Around Bounding Box" is applied to the image yet no text is wrapped. After opening the file, making sure to unset and reset the text wrap on each offending image to show an "actual" text wrap WITHOUT changing layer order, saving the file, closing, and reopening, some images have "false" text wrap again! This is a 77 page document with images on every page.
Another occurrence is if I largely change the flowed text. If I must remove a paragraph on page 7, for example, then the "actual" text wrapped images on page 10, 12, and 18 change to "false" text wrapped images and I have to reset the text wrap on each image. There are often images in between offending ones that DO NOT change, but it doesn't seem to be the same ones each time. So once image A, C, and D will change to "false" text wrap, while B, E, and F are fine; the next time, A, B, and F are wrong and the others are fine. This is driving me crazy as I have never in 8 years of using InDesign encountered a problem using Text Wrap. Please note:
Ignore Text Wrap IS NOT selected.
The text box IS below the images.
The copy is flowed throughout the document.
Preferences>Composition>"Text Wrap Only Affects Text Beneath Selected"" DOES NOT FIX IT.
"Wrap around bounding box" IS showing as selected for the image/images.
There is NO CLIPPING PATH / PHOTOSHOP PATH / ALPHA PATH on these images.
The images / text box order is not changed between being correct and being incorrect.
Anyone else with this trouble? And, if so, how did you fix it? Thanks,
A. Henson
InDesign 7.0.3
iMac i7
8GB RAM
OS X 10.6.6

@henson26,
I emailed you offline to see if you can provide me with an example file that shows the problem.
Matthew

I'm having problem with text boxes. Whenever i hit the enter button to start a new line or paragraph, the cursor doesn't drop down to the next line. Instead i get this little red + sign in the box.

I'm having problem with text boxes. Whenever i hit the enter button to start a new line or paragraph, the cursor doesn't drop down to the next line. Instead i get this little red + sign in the box.

You are absolutely right. Thought Enter meant Enter. I was wrong. Thank you for the help.
Rod Rogers, Broker
Accredited Land Consultant (ALC)
Metcalf Land Company, Inc.
Office: 864-585-0444
Mobile: 864-316-0297
Fax: 864-583-6000
<http://www.metcalfland.com> www.metcalfland.com

I am having problem with lighroom cc brushe when i have GPU TURN ON WHEN OFF I HAVE NO PROBLE,CAN ANYONE HELP?

IS ANY ONE HAVING PROBLEM WITH LIGHTROOM CC BRUSH WHEN THE GPU IS TURN ON

F. McLion wrote:
Update your graphic card driver to the latest version.
btw.: Rule number 2 - Do not use all caps - Netiquette Wiki
And for a very practical reason from your point of view: using all caps looks like SHOUTING, and people will concentrate more on the SHOUTING than on answering your question. Some will just ignore you for this reason.
If updated drivers don't fix the problem, perhaps you can tell us what is the "PROBLEM WITH LIGHTROOM CC BRUSH WHEN THE GPU IS TURN ON" that you are having.

Continual problem with the Adjustment brush in both Lightroom 3 and Lightroom 4

The Adjustment brush in both Lightroom 3 and Lightroom 4 continually stops functioning correctly - that is any adjustment made using the sliders in the Adjustment Brush panel does not make an adjustment on the image. Normally I would go to Library / Preferences [on my iMac OSX 10.6.8], remove the com.adobe.Lightroom3.plist file and restart Lightroom. However I have gone to Library/Preferences and there is no listing of any Lightroom 3 plist files, nor for that matter any adobe Photoshop CS5 plist files or any adobe Lightroom 4 plist files. I have tried restarting the iMac but to no avail - no help at all! I have no idea how to remedy the situation as I have no idea where the plist files have gone!!!
Incidentally I have a new iMac 27" OSX 10.8 - same problem with the Adjustment Brush there, but so far the plist files haven't disappeared into the ether somewhere!
Help would be appreciated ...
Many thanks

Hi Jussi
I tried changing to the B brush set, and the Adjustment Brush worked OK in there for a while - but now I have the same problem with the B brush set too. It appears to happen instantly - one minute they're working, the next minute they're not!! For example, I was adjusting Brightening using the Adjustment Brush and I literally made an adjustment on one image, then went back into the same image seconds later to make a further Brightening adjustment and the brush wasn't working - well, that is, not unless I pushed the slider to something like 160 and then I got minimal adjustment!!! I am becoming increasingly frustrated .. I have literally worked for months with no problems, now it's almost every day!!

Having problems with texts width when viewed in Firefox

I My site is OK when viewed in Chrome and Safari, but in Firefox, the width of paragraphs is becoming very long and all is displayed wrong.
I need a clue where to look to fix. I have not , or very little knowledge of HTML code. So I rely on the DW CS5 interface.
Thanks,D.

Thanks Nancy ,
I'll try,
Should I just paste your info between the brackets, I guess.
I am not so good with this but I need to spent a bit of time to fix this
old web site while another one is being designed.
Yes the images are too big, I'll reduce them, and optimize. This was
done in a rush..
D.
Le 14-02-23 18:07, Nancy O. a écrit :
>
Re: Having problems with texts width when viewed in Firefox
created by Nancy O. <http://forums.adobe.com/people/Nancy+O.> in
/Dreamweaver support forum/ - View the full discussion
<http://forums.adobe.com/message/6149874#6149874

Hi! I have a problem with the adjustment brush some are not there anymore like soften skin, how i can fix that?

Hi! I have a problem with the adjustment brush some are not there anymore like soften skin, how i can fix that?

Hi dear,
it's funny, real funny.
I think the programmes have diffrent sound system from the normal calls system.
All you need to do is to turn the sound up from the bottom in the phone side in the time you're making or recieving the call.
you'll hear the sound.
I hope that would help.
All the best

I'm having some problem with Text imported from Motion into FCPro

Hey Everyone.
I've got an animation that I created in Motion.
The format for the timeline in Motion is NTSC DV 4:3
Final Cut has the same attributes to the sequence.
I have text on my graphic.... Some of it looks great. Some of it does not.
You can see it here.
http://www.drewwfilms.com/Temp/McClure/Graphic.html
The word "Show" looks terrible, where as the other text looks great.
I do have a filter on the word show... actually it's not even a filter it's just one of the style parameters which is Outline and Face. The outline attribute has a bit of a blur on it.
Still i would think this would copy over into final cut without and issue but for some reason it looks really bad.
Anyone have any ideas on this?
Thanks.
-Fraky

Your problem stems from the bright red on a dark background. It is particularly noticable on text because it is a uniform color.
You might have other elements in your movies that use this exact shade and it wiil happen there, but it is less noticable because that element consists of multiple tones and is probably moving.
Very saturated, bright reds always cause problems in video. It is a limitation of the medium.
If you want to learn more about this facinating subject, the keywords are *Chroma Rise Time*.
The solution: desaturate and/or lighten the red, change the color completely or live with it.
Once I render. I get the pixelation.
Your Motion clip is being rendered to your NTSC DV Sequence setting which is 1:5 compression.
The problem with the red is only made worse due to this.
Message was edited to answer newer information from Fraky.

Having problem with text sise on webpages

the text is several times bigger in the first post on a forum and it is the same for a another phone too.
i only have the problem with firefox
screenshot http://bildr.no/view/ME9Cc2VS

This is a common feature of smartphone browsers in which desktop sites are text inflated to make the main body of text larger. This tends to break down in forums or sites that provide short summaries of articles.
You can disable or change the inflation levels in the Firefox for Android settings.
* With Firefox open
* Press the phone's menu button or the three dot button in the upper right
* Select settings (you might need to scroll the menu or select more)
* Select Display
* Select Text Size
* Press the small 'A' till the text does not shrink any more
* Press set
Future pages will not be inflated.

Problems with text in iWeb publishing much larger, or smaller than in iWeb (it is insane)!

More than a year ago I had a problem with my iWeb not publishing correctly: links to other websites would not open in a separate window as designed in iWeb. I got help from an AppleCare techie and after he did a lot of tests, he concluded I had a corrupted Domain file (which became apparent after I upgraded to OS Snow Leopard). I don't remember if I discussed with this techie another problem I had been having for as long as I had used iWeb, and that was "exploding" text: certain words, often italicized, would be huge, after publishing, relative to the surrounding text. Sometimes certain words, or sentences would be smaller than designed in iWeb. Through trial and error I would sort of solve these problems by enlarging text boxes, or making the offending word or phrase one text point smaller. Sometimes deleting the text box entirely, and starting over would work. And then there are the weird things that happen when my wife opens my website in Internet Explorer: things that make no sense and seem to be totally out of my control.
So, I've spent a long time rebuilding my website in this supposedly uncorrupted Domain file, and today I finally finished and published to my hard drive, checked it out, and the "exploding" text is there with a vengeance. So much so that I may just stick with my original ("corrupted") Domain file, the text problem on this new one seems even worse than the old one. Anyone had this problem? I meant to ask this question years ago, but got a bit lazy.
Another question is: I've heard Apple is going to discontinue iWeb. Despite my problems with the program, I rely on it. What are the options going to be for iWeb users?

Well you heard wrong didn't you!
Apple is discontinuing MobileMe, which is the hosting in favour of iCloud services which will not contain any hosting.
iWeb is an app and as far as we know you can still continue to use it - it will still work so carry on using it if you are happy with it.
If you want to look at other alternatives to iWeb, then others suggest RapidWeaver and Sandvox as being closer to iWeb - both are available via the Mac App store.
Also Freeway Express and Flux 3 are worth looking at - more design freedom and you are not restricted to templates as with RapidWeaver.

Problems with text on my macbook pro, dock not loading and blinking display

Hi guys,
if anyone can help i'll be very greatful!
I've been having problem with the text on my mac, all of the words are in gibberish and the dock won't appear,
can someone please help.

Hi gio-vio!
It seems like you are trying to view Safari in your picture. If this happens whenever you open Safari, you may find some helpful information in the following article:
Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
http://support.apple.com/kb/ts3230
If this is happening from the moment you boot into your user, then you may want to troubleshoot by attempting a Safe Boot:
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/ht1564
If the issue still persists, you may need to ultimately reinstall OS X:
OS X Mavericks: Reinstall OS X
http://support.apple.com/kb/ph13871
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Problems with text box borders, tabbing and saving doc in Acrobat Pro 7.1.0

When I view my form document in Acrobat Reader, there is a red border around several text boxes
in which I've selected 'NO border'
Also, I've selected 'column order' for tabbing, but tabs continue to function in order in which I inserted form item (text box, check box or radial button). Since I didn't insert these consecutively, tabs no jump all around the form instead of proceeding in order from top to bottm and left to right.
I've checked for Mac Acrobat Pro updates and see that there are three - 7.1.1, 7.1.3, and 7.1.4, and am downloading them for install.
Do any of the updates fix these problems? Or how can it be fixed?
On opening document in Reader, I also get a message informing that document cannot be saved with changes and must be printed, even though I've created it with fillable forms.
Is there some setting for allowing document to be saved?
I want to be able to have recipient be able to download form, fill it out, save changes, attach to email and return it to me.

This has been a problem since version 8 on the mac. Acrobat 7 on the mac worked fine with the right side trim but not on the PC.
We are still having this problem with Acrobat 9.4.0 on the Mac & PC.
This has now been an issue for 2 versions of Acrobat Pro.(8 & 9)
Being in Pre Press and having to constantly set the trim for jobs, this is now taking up too much time and costing money.
Please fix this Adobe.
and on another note. how hard would it be to display the trim (if set) next to where the page size is?
If the trim is set it should display it! why should we have to go to document/crop pages>trim.
Im in a busy Pre Press Dept and the amount of times you have to check a trim size is stupid.
I always set prefs to display crop / trim / and bleed boxes and this helps but it should display it if its set.
Thanks
Hope this is resolved soon.

Problems with text using Photoshop CC on Windows 8.1

I am using Photoshop CC on Windows 8.1. I get flickering on the screen as described by others. My main problem, however, is that when I try to use the text tool the layer goes completely black and I cannot see what I am typing or edit the text. I have tried updating my video card driver and my monitor driver. I have deleted the font cache file, I have tried using Photoshop without plug ins (I use Nic plug ins). The only thing that has worked is resetting the preferences by holding down alt+control+shift keys when starting photoshop. This allows me to enter text normally on one photograph and one only. Once I have completed that first photograph and load another I get the black layer. I desperately need help. If this continues I will have to cancel my membership as I was much better off using my Photoshop Elements 11 disc.
Any help will be very gratefully appreciated...............help seems to be very difficult to come by Adobe you make it very difficult for your customers!

Ok,I can appreciate that I may not have given enough information. You state that without proper system information nobody can help, but I need to know what information is needed. You also state that I should simply turn off hardware acceleration in the perfs. What does that mean? How do I do that? I have tried changing the GPU Drawing Mode to basic and it didn't work. Is this what you mean? You may be assuming a level of knowledge I do not have. From research I have done this seems to be a problem with windows 8.1 that Adobe have been aware of for about a year. I have followed all the online advice I have been able to find but nothing seems to be working.
Siren2110

Having problem with applying layer style "stroke" to group

- Windows 8.1 / 64bit
- i3-4150 / 4GB / Geforce GTX 750 TI
- Photoshop CC 2014
Hi!
I don't know why, but there is some problem that applying layer style "stroke" to group.
When i make a group with some layer and apply to group a layer style-stroke with inside option,
the strokes looks like grid are generated inside.
Why i said that stroke cross to ㅎrid, because it looks like grid if i make that group bigger.
(that black square is 'Rectangle 1' layer. Just resizing bigger than before)
Does anyone have same problem with me?
Please, I need your help..

pillfish wrote:
I am having the same problem. it happens every time in cc and cc 2014. I am back using cs6. Which seems to run better on the whole.
That's interesting. And this is happening with CC and CC 2014? Do you have all the updates for the Photoshop CC versions?
I've just tried to duplicate it without success, (windows 7, GTX570) so I wonder if there is a condition that triggers it? Unfortunately, with this being such an old thread, the only person still around is R Kelly.
OK, I just thought to try it on my Cintiq Companion 2, which has Windows 8.1 and Intel 5100, and the bug occurred. I actually got as far as firing up my Win 8.1 laptop before remembering that I had to sign out of CC to put it on my Cintiq, so I only have CS6 on it.
Anyway.... looks like the bug is still there. Are you using Win 8.1?

Problem with text in Brush Stroke motion menu

Similar Messages

Maybe you are looking for