Problem with text window

On my timeline I had white titles and at the end a green title with a parcially transparent background.
When i restarted the project my titles were green and the end titels were black without the transparent background. And one of the music track was set to minus 96 db.
anyone have some solution to this problem?
kind regard Peter

Thanks for responding so swiftly. My problem has been solved by my son this afternoon.(The Netherlands, Europe)  I had already tried trashing the preferences and cash files and reinstalled FCPX twice. My son could only think of one other thing we could trash and that was the proapps folder. I my case this solved the problem.
I used the built in title templates. No third party.
thanks again.

Similar Messages

  • "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows 7 64bit

    I was promted to upgrade to the new itunes version today (11.0.2.26), but wish I never had as the previous version worked just fine!! I have been unable to install the new version and keep getting the message about there being a problem with the Windows Installer package. I tried following the instructions on this support pages on removing all Apple programs but that didn't work either!! I have Windows 7 64 bit and am close to throwing my PC out of the window!! Quicktime will not re-install correctly either...
    Any suggestions will be most gratefully received

    Just in case, let's try a standalone AppleSoftwareUpdate.msi install.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
    Go into the folder and doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleSoftwareUpdate.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If not, what error message do you get? (Precise text, please.)

  • Getting error and cannot download itunes.  says there is a problem with the windows installer package. a program required for the install to be complete could not be run.  any ideas?

    getting an error downloading itunes 64bit for windows 7.  says there is a problem with the windows installer package.  a program required for the install to be complete could not be run.  any ideas?  i uninstalled it last night when it would not open.

    Just in case, let's try a standalone AppleSoftwareUpdate.msi install.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
    Go into the folder and doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleSoftwareUpdate.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If not, what error message do you get? (Precise text, please.)

  • Help! There is a problem with this windows installer package

    I've tried previous fixes posted on the boards but they don't work for me.
    I know the problem is coming from Apple Software Update. When I extracted the installer files and attempted to install that one, the error pops up: "There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
    I tried attempting the "repair" fix by going to control panel, but it was not there. I also attempted using Microsoft Fixit but I don't see any Apple Software Update as well.
    Any ideas? Thank you very much!

    Just in case, let's try a standalone AppleSoftwareUpdate.msi install.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
    Go into the folder and doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleSoftwareUpdate.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If not, what error message do you get? (Precise text, please.)

  • Solved: InDesign CC: Problems with text in text box: text flows around invisible object

    I just upgraded from CS4 to CC. I have two problems with text in some text boxes:
    The text seems to flow around invisible object that I cannot find or delete. It's as if there is a photo or other object behind the text box; but when I press COMMAND-a to select all, I don't see any such object.
    When I move this text box, the layout of the text within changes. For example, when the box is high on my spread, the text flows correctly within the box; but when I move it down, it flows around that hidden other object. For another example, when the box is low on the page, the text starts at the top of the box; but when I move the text box up, the text starts somewhere in the middle of the box.
    I have checked margins of the text box and the paragraph options of the text paragraphs (margins, indents, alignments). They all look OK.
    If I modify the text box, checking the box "Ignore text wrap", then the problem goes away; but then the text also will not flow around a real object that I want it to flow around.
    Solution:
    There were objects in a hidden layer on that one spread. It seems that in CS4 when you "select all" you would also select objects in hidden layers; but in CC it doesn't.

    Arthur, Garry
    Would be great if you could send the files as attachment in an email to [email protected]
    Else, you may post here using these steps: http://forums.adobe.com/message/3994281
    Thanks!
    - Neeraj

  • ID CS5: Problem with Text Wrap being Forgetful :(

    I am having a problem with text wrap. Whenever I open this INDD file I am working on now, some of the images shift from having what I call "actual" text wrap to having "false" text wrap. "Actual" text wrap *actually* wraps the text around the image as it is supposed to; "false" text wrap says that "Wrap Around Bounding Box" is applied to the image yet no text is wrapped. After opening the file, making sure to unset and reset the text wrap on each offending image to show an "actual" text wrap WITHOUT changing layer order, saving the file, closing, and reopening, some images have "false" text wrap again! This is a 77 page document with images on every page.
    Another occurrence is if I largely change the flowed text. If I must remove a paragraph on page 7, for example, then the "actual" text wrapped images on page 10, 12, and 18 change to "false" text wrapped images and I have to reset the text wrap on each image. There are often images in between offending ones that DO NOT change, but it doesn't seem to be the same ones each time. So once image A, C, and D will change to "false" text wrap, while B, E, and F are fine; the next time, A, B, and F are wrong and the others are fine. This is driving me crazy as I have never in 8 years of using InDesign encountered a problem using Text Wrap. Please note:
    Ignore Text Wrap IS NOT selected.
    The text box IS below the images.
    The copy is flowed throughout the document.
    Preferences>Composition>"Text Wrap Only Affects Text Beneath Selected"" DOES NOT FIX IT.
    "Wrap around bounding box" IS showing as selected for the image/images.
    There is NO CLIPPING PATH / PHOTOSHOP PATH / ALPHA PATH on these images.
    The images / text box order is not changed between being correct and being incorrect.
    Anyone else with this trouble? And, if so, how did you fix it? Thanks,
    A. Henson
    InDesign 7.0.3
    iMac i7
    8GB RAM
    OS X 10.6.6

    @henson26,
    I emailed you offline to see if you can provide me with an example file that shows the problem.
    Matthew

  • I am trying to install iTunes on my PC, but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." Help!

    I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!

    Hey madnest,
    Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Issues installing iTunes or QuickTime for Windows
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected.  Contact your support personnel or package vendor."

    I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected.  Contact your support personnel or package vendor."

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • I get the errer message "There is a problem with this windows installer package. A program required for this install to complete could not be run."

    I have Wondows Vista... I tried to upgrade to Itunes 10.5, and received an error orginially stating that I was trying to install a version older than the one I had.  I uninstalled all of itunes, and now I'm getting the error  message "there is a problem with this windows installer package.  Aprogram required for this install to complete could not be run.
    Help!  I have an IPhone, and I would like to get my Itunes upgraded so I can download the new Iphone software...
    Thanks!

    I have been in touch with Apple support in reference to my problem. We went through every solution available, and found no fix. The tech then suggested I contact Microsoft concerning this issue. I thought that suggestion was just to get me pointed somewhere but Apple. Boy was I wrong!! I contacted Microsoft, and was directed to a free download called Microsoft Fix. This program fixed something in the regisitor, and wala everything was fixed!! I now have I-Cloud and I-Tunes loaded and working well. So, if you can't install Apple Software and are running Window 7 you might give Microsoft Fix a try, it fixed my problem.....

  • I am trying to upload itunes 10.5, but get a message "There is a problem with this Window Installer Pkg. A program required for this install to complete could not be run.  Contact your support personnel or package vendor".  What is it I need to do?

    I am trying to install itunes 10.5, but during the download I get the following message, "There is a problem with this Window Installer Package.  A program required for this install to complete could not be run.  Contact your support personanal or package vendor."  If this is my personal computer and was able to upgrade to the previous version (pre 10.5), why not now?  What is my "package vendor"? And what is it I need to do to fix this?  The message is unclear.  Unfortunately, I deleted my itunes program, thinking that in doing so, 10.5 would finally load.  Now I have no itunes on my computer and unable to sync my iphone.  Help!
    Thanks - Rick

    Hi Rick,
    by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
    Success,
    Peter

  • HT1926 when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

    when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

    Repair your Apple software update.
    Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
    If you don't find ASU, go to Control Panel:
    START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR,

  • ITunes 10.5 Upgrade fails to Install. The Error Message is: "There is a Problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."

    When Upgrading on my laptop from iTunes 10.2.11 to 10.5.0 the message I get is: "There is a problem with this Windows Installer Package.  Aprogram run as part of the setup did not finish as expected. Contact your support personnel or pacakge vendor.

    After reading all these posts, one by one did not resolve my problem until I got the very end.  Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
    1. Stand alone upgrade to the latest Quicktime version
    2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
    iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
    Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
    Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
    Great work everyone who contributed!  Thank you very much!

  • How to re-install iTunes after receiving "There is a problem with this Windows Installer package ..." message?

    Hi,
    This is how it all started. When the new update for iTunes 11 came out, I tried to update it. After I had updated it I found nothing had changed. So i tried rebooting my computer and everything and found that still nothing had changed. So I tried uninstalling it. After that I tried to re-install it, but it came up with the
    "There is a problem with this Windows Installer package ..." message. So I looked around the internet and found a website that told me to uninstall all Apple products. So i did that. When i tried to uninstall Apple Software Update, it came up with the 'problem with windows' message again. So I used Revo to uninstall it. So I rebooted and tried to install it again. It installed Bonjour and all of the other programs but stopped halfway and gave me the 'proplem with windows' message again. I've looked around and most of the solutions have been to try and repair Apple Software Update, but the problem is, I've already deleted it. So can someone PLEASSEEEE help me fix this problem! (Sorry for droning on)

    http://support.microsoft.com/mats/Program_Install_and_Uninstall  try this an see if it fixes it.

  • I'm not able to download Itunes.  I keep getting this Apple Software Update message that states "There is a problem with this Windows installer package.  A program required for this install to complete could not be run.  Contact your package vendor"

    Not able to access Itunes store anymore.  Just quit working for no reason.  I've tried deleting Itunes and related components from the Control Panel, but when I try to remove Apple Software Update, I get a message that states "There is a problem with this Windows installer package.  A program required for this install to complete could not be run.  Contact your support personnel or package vendor".  Not sure what this message means.  Am I suppose to contact Apple ?  What is meant by package vendor ?

    Apparently it's an itunes issue. I just tried to update and got the same issue. Called att to activate my iphone 4s and they say they can do the swap but apple is telling them itunes is down atm.  So will have to wait

  • When I try to install iTunes 10.5, it says, "There is a problem with this Windows Installer package.  A program run as part of the setup did not finish as expected.  Contact your support personnel or package vendor."  I have Windows XP and I need help.

    5, it says, "There is a problem with this Windows Installer package.  A program run as part of the setup did not finish as expected.  Contact your support personnel or package vendor."  I have Windows XP and I need help.

    After reading all these posts, one by one did not resolve my problem until I got the very end.  Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
    1. Stand alone upgrade to the latest Quicktime version
    2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
    iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
    Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
    Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
    Great work everyone who contributed!  Thank you very much!

Maybe you are looking for