Problem with text written on a image

Hi , I'm new to PSE9.
I have a plain image and I want to write some text on it.
ok but when I do this the text is does not look right. Its not sharp enough.
The definition of the lettersis not brilliant . Also how do you put bullet points on the image
sorry this sounds a bit basic
Thank you for your assistance

For your first question what font face and size are you using?
To answer your second question, refer to my msg#2 at http://forums.adobe.com/thread/607934 where I discuss how to insert special characters using the Windows Character Map.
Here I did a search on "bullet" and selected the round bullet and clicked the Copy button.
Then in PSE I activated the Text tool, clicked to start the text, did a Paste (Edit > Paste, or Ctrl-V) to insert the bullet, typed "line 1" followed by carriage return, then another Paste followed by "line 2".

Similar Messages

ID CS5: Problem with Text Wrap being Forgetful :(

I am having a problem with text wrap. Whenever I open this INDD file I am working on now, some of the images shift from having what I call "actual" text wrap to having "false" text wrap. "Actual" text wrap *actually* wraps the text around the image as it is supposed to; "false" text wrap says that "Wrap Around Bounding Box" is applied to the image yet no text is wrapped. After opening the file, making sure to unset and reset the text wrap on each offending image to show an "actual" text wrap WITHOUT changing layer order, saving the file, closing, and reopening, some images have "false" text wrap again! This is a 77 page document with images on every page.
Another occurrence is if I largely change the flowed text. If I must remove a paragraph on page 7, for example, then the "actual" text wrapped images on page 10, 12, and 18 change to "false" text wrapped images and I have to reset the text wrap on each image. There are often images in between offending ones that DO NOT change, but it doesn't seem to be the same ones each time. So once image A, C, and D will change to "false" text wrap, while B, E, and F are fine; the next time, A, B, and F are wrong and the others are fine. This is driving me crazy as I have never in 8 years of using InDesign encountered a problem using Text Wrap. Please note:
Ignore Text Wrap IS NOT selected.
The text box IS below the images.
The copy is flowed throughout the document.
Preferences>Composition>"Text Wrap Only Affects Text Beneath Selected"" DOES NOT FIX IT.
"Wrap around bounding box" IS showing as selected for the image/images.
There is NO CLIPPING PATH / PHOTOSHOP PATH / ALPHA PATH on these images.
The images / text box order is not changed between being correct and being incorrect.
Anyone else with this trouble? And, if so, how did you fix it? Thanks,
A. Henson
InDesign 7.0.3
iMac i7
8GB RAM
OS X 10.6.6

@henson26,
I emailed you offline to see if you can provide me with an example file that shows the problem.
Matthew

Having problems with texts width when viewed in Firefox

I My site is OK when viewed in Chrome and Safari, but in Firefox, the width of paragraphs is becoming very long and all is displayed wrong.
I need a clue where to look to fix. I have not , or very little knowledge of HTML code. So I rely on the DW CS5 interface.
Thanks,D.

Thanks Nancy ,
I'll try,
Should I just paste your info between the brackets, I guess.
I am not so good with this but I need to spent a bit of time to fix this
old web site while another one is being designed.
Yes the images are too big, I'll reduce them, and optimize. This was
done in a rush..
D.
Le 14-02-23 18:07, Nancy O. a écrit :
>
Re: Having problems with texts width when viewed in Firefox
created by Nancy O. <http://forums.adobe.com/people/Nancy+O.> in
/Dreamweaver support forum/ - View the full discussion
<http://forums.adobe.com/message/6149874#6149874

Solved: InDesign CC: Problems with text in text box: text flows around invisible object

I just upgraded from CS4 to CC. I have two problems with text in some text boxes:
The text seems to flow around invisible object that I cannot find or delete. It's as if there is a photo or other object behind the text box; but when I press COMMAND-a to select all, I don't see any such object.
When I move this text box, the layout of the text within changes. For example, when the box is high on my spread, the text flows correctly within the box; but when I move it down, it flows around that hidden other object. For another example, when the box is low on the page, the text starts at the top of the box; but when I move the text box up, the text starts somewhere in the middle of the box.
I have checked margins of the text box and the paragraph options of the text paragraphs (margins, indents, alignments). They all look OK.
If I modify the text box, checking the box "Ignore text wrap", then the problem goes away; but then the text also will not flow around a real object that I want it to flow around.
Solution:
There were objects in a hidden layer on that one spread. It seems that in CS4 when you "select all" you would also select objects in hidden layers; but in CC it doesn't.

Arthur, Garry
Would be great if you could send the files as attachment in an email to [email protected]
Else, you may post here using these steps: http://forums.adobe.com/message/3994281
Thanks!
- Neeraj

I'm having problem with text boxes. Whenever i hit the enter button to start a new line or paragraph, the cursor doesn't drop down to the next line. Instead i get this little red + sign in the box.

I'm having problem with text boxes. Whenever i hit the enter button to start a new line or paragraph, the cursor doesn't drop down to the next line. Instead i get this little red + sign in the box.

You are absolutely right. Thought Enter meant Enter. I was wrong. Thank you for the help.
Rod Rogers, Broker
Accredited Land Consultant (ALC)
Metcalf Land Company, Inc.
Office: 864-585-0444
Mobile: 864-316-0297
Fax: 864-583-6000
<http://www.metcalfland.com> www.metcalfland.com

Problems with my Acrobat IX reading images

I have just started having problems with my Acrobat IX reading images. I have now noticed that when I open up a PDF, the images are now blacked out with a black box. These are all documents that I have been able to read just fine in the past. I have done some research online and have found others who are having the same problem but I cannot find a solution. Some solutions I have found are to make sure on the printer settings that it reads large images which I have done and that it prints in color which I have also done. When I print out the document, it prints just fine, I just cannot read it on the screen.
Please any help would be greatly appreciated.

Thank you so much for taking the time to respond but nope. unfortunately I have tried that a few times, both clicking and unclicking the view large images with no luck. Since I have Acrobat IX Adobe wont help me. Any other suggestions? Should I just uninstall and reinstall this program?? When I Google this problem it appears that a lot of people are having this problem.

RTL text written in 'mirror image' in Dreamweaver CC - semi solution found

I have Adobe CC, which is set on English with Hebrew support. I downloaded InDesign and Photoshop under this setting, and they work perfectly well in Hebrew.
I'm trying to build a site in Hebrew, but whatever I write inside DW *code editing* is shown in a mirror image: It's equivalent to writing "this is a book" and getting "book a is this" (curiously, this doesn't effect on the characters inside the words themselves; 'book' will still show as 'book'). The live preview and the checks on various browsers display the Hebrew properly - this isn't a problem with the code (which already contains '<html lang="he">' and 'body { direction: rtl; }'), but rather how DW CC the program displays the text.
Is there a solution for this that does not involve me learning how to read Hebrew back to front or switch to a different editor?
Bottom line:
- Adobe CC already set on English with Hebrew support (other programs work fine with Hebrew)
- Not code problem - all tags are written properly and text displays properly on all browsers I've checked, as well as the live preview
- Happens between tags and in lines without tags
ETA: I installed the CS6 version of DW (English with Hebrew support), and it works perfectly. But I'd still like to be able to work on DW CC.

Hi,
We tried reproducing the problem at our end. Everything worked fine here.
Can you please share some more information on your machine configuration:
1. Mac or Win > Operating system
2. OS settings > Locale and Keyboard used
3. What all other Adobe products you have installed on your system (CC and CS)
4. Does deleting preferences helped you
We will try to replicate your machine environment here. If that does not succeed, we might ask you to share your screen with us so we can try to isolate the problem.
thanks,
Rakesh Lal

Problem with text formatting on upload

Hi there,
I am new to iWeb and coming from a design background where I'm used to being able to format text leading and character spacing in programs like inDesign.
I have found where to do this in iWeb so that my text is not all bunched up and close together, giving the layout some breathing space, but when I publish the site and view it online this formatting doesn't work and the text goes back to its old bunched up look.
Does anyone have a tip on how to fix this?
Thanks!

Thanks Tom,
The URL is www.yachtprojects.eu and I am having all sorts of problems with the site now. I am based in France, using Orange as my ISP and I cannot access the site from either my home computer or my iPhone (which is also on Orange). It takes AGES to load and then finally comes up with the text but no images.
Other people however can see the site, and when I was in Ireland last week, I could see it, but it had some worse problems with the fonts not fitting the layout than I was describing before. I have no idea why this has happened or how to fix it and I'm currently looking at moving the site to a different server to see if that makes a difference. The current server people claim that they can see the site OK so they have no interest in helping me solve the problem.
With regard to viewing the site on other browsers, I have tried Safari, Firefox and Explorer and none can view the site properly from my home Mac. Other people everywhere else seem to be able to see the site, but I don't know if the text looks the way it should or not and I suspect the line spacing problem is still there.
The best representation of the site with just the initial problem of line spacing but all other things OK is if you look at it on my mobile me server: http://web.me.com/alisononline/yachtprojects/Home.html this is the way the site was meant to look, but just with the line spacing not as spread out as it should be.
It would be wonderful if you could help shed some light on these problems for me!
Thanks
Alison

Problem with text/HTML item in 9.0.2

Hi
When I add a text item in Portal 9.0.2, the built in HTML editor makes changes to the HTML as entered.
Is there a way to prevent this?
Regards
Harry

Hi
The changing of relative to absolute is the one that bothers me. I think it also added line breaks, which caused problems with gaps appearing between images.
The other one I remember is adding <tbody> tags to a table.
I would prefer it if one could prevent the editor from making any changes in the HTML whatsoever. As an option maybe.
Is it possible to create a simple HTML item as a shared component that one could drop into any page?
Regards
Harry
What changes are you seeing?
I know that the editor converts relative links to absolute links (a bug has been logged for this and the issue is mentioned in the release notes).

Problem with text editor font

Hiii..
Actually I am facing some problems with the text editor font. Since I have some part of text was written in arabic (For labels), currently these parts are not readable and appears like this:
"Ø·Â§Ø·Â³Ø¸â¦ Ø·Â§Ø¸âØ·Â¥Ø·Â¯Ø·Â§Ø·Â±Ø·Â© Ø·Â§Ø¸âØ·Ú¾Ø·Â¯Ø·Â±Ø¸Ù¹Ø·Â¨Ø¸Ù¹Ø·Â©"
I have tryed to fix that using:
Tools --> Preferences --> Code Editor --> Font
However it still arise.
Please reply me the solution if you have some idea about this..
Regard's

Which JDeveloper version?
What is the character encoding settings for your project's compiler in the project properties?

Problems with text in iWeb publishing much larger, or smaller than in iWeb (it is insane)!

More than a year ago I had a problem with my iWeb not publishing correctly: links to other websites would not open in a separate window as designed in iWeb. I got help from an AppleCare techie and after he did a lot of tests, he concluded I had a corrupted Domain file (which became apparent after I upgraded to OS Snow Leopard). I don't remember if I discussed with this techie another problem I had been having for as long as I had used iWeb, and that was "exploding" text: certain words, often italicized, would be huge, after publishing, relative to the surrounding text. Sometimes certain words, or sentences would be smaller than designed in iWeb. Through trial and error I would sort of solve these problems by enlarging text boxes, or making the offending word or phrase one text point smaller. Sometimes deleting the text box entirely, and starting over would work. And then there are the weird things that happen when my wife opens my website in Internet Explorer: things that make no sense and seem to be totally out of my control.
So, I've spent a long time rebuilding my website in this supposedly uncorrupted Domain file, and today I finally finished and published to my hard drive, checked it out, and the "exploding" text is there with a vengeance. So much so that I may just stick with my original ("corrupted") Domain file, the text problem on this new one seems even worse than the old one. Anyone had this problem? I meant to ask this question years ago, but got a bit lazy.
Another question is: I've heard Apple is going to discontinue iWeb. Despite my problems with the program, I rely on it. What are the options going to be for iWeb users?

Well you heard wrong didn't you!
Apple is discontinuing MobileMe, which is the hosting in favour of iCloud services which will not contain any hosting.
iWeb is an app and as far as we know you can still continue to use it - it will still work so carry on using it if you are happy with it.
If you want to look at other alternatives to iWeb, then others suggest RapidWeaver and Sandvox as being closer to iWeb - both are available via the Mac App store.
Also Freeway Express and Flux 3 are worth looking at - more design freedom and you are not restricted to templates as with RapidWeaver.

Problem with text resizing and moving

After much pain with this issue, I'm going to ask for help.
The whole issue(s) resolves around text upsizing, changing and moving in Muse.
No amount of grouping, layering and locking has stopped this issue for me.
I don't have divs that are a pixel off and whatnot. This happens even when I have a blank site and I test it (as seen in the example pic below).
The majority of the time, this is an issue when viewing Muse created sites on Android, although text does move when viewed on iOS.
Example 1:
I have a square div. I put text in the div that I want to stay contained in the div. Basic right?
View site on browsers and iOS devices it generally plays by the rules (although not always, there are some movement going on). When viewing this example text and div on an android device, the text resizes larger. This results in the text overlapping the div and moving EVERYTHING below it down. This makes it impossible to tightly design anything for a website.
I know Android has options within it for users to set text viewing size, but this worthless from a web designer standpoint. That is something I can't control.
Example 2:
I have 1 text field and set the typeface to 15. There is nothing else on the page, just a background image (under "Fill"). Viewed on browsers and iOS looks fine. When viewed on Android this text balloons to some enormous size (25+) that makes the website utterly useless. This random resizing makes it impossible to design to.
Example 2.5:
I take that same text from example 2, copy it into 2 of the same size text fields. They are placed next to each other, taking up the same width as Example 2. It now looks like 2 columns of text. Set the typeface to 15 again. I view it on Android and get the resizing issues from example 1 not example 2. It's noting to the extent of example 2 but like example 1, it still changes enough to ruins any design I'm trying to accomplish.
Is there any place in Muse to lock the text? I don't want to make the text into an image (obviously).
I been dealing with this in Muse for 6 months and haven't been able to find anything online or in forums about. I understand with the bevy of platforms out there nothing will look the same across the board, but right now I don't see how I can continue working with this issue.
Am I the only one dealing with this?
Thank you for any assistance.

Welcome to the annoying realities of working with text on websites... Nothing you describe is unique to Muse.
Every browser has it's own text engine and thus each line breaks text differently. Even the exact same web page on the same computer with the same fonts will sometimes result in different line breaks in different browsers, or even in different versions of the same browser. It's just a side effect of the nature of determining a line break, where even the most miniscule difference in calculations can result in an entire word fitting, or not fitting.
There are two "tools" that are especially important to understand and use effectively in order to create designs that work as effectively as possible with the variation in line breaks from one site viewer to the next.
Text Frame Height Always Matters
If a text frame is drawn to the exact height of the text wthin the frame, then any increase in the number of lines of text due to changes in line breaks will result in the text frame growing and other objects below the text frame being moved down.
If a text frame is drawn larger than the height of the text then when line breaks change the text frame won't grow unless the changes in line breaks are severe enough to result in the flowed text being taller than the text frame was originally drawn.
If you resize a text frame smaller than the text within the frame in Muse Design view, the frame will snap back to be large enough to accommodate the text, but a dotted horizontal line will appear within the text frame indicating the "minimum height" for the text frame. If line breaks change in the browser the text frame will grow or shrink in height down to the minimum height indicated by this dotted line.
Careful sizing of text frames can go a long way to creating a design that will continue to work well even when line breaks, and thus text frame heights change.
Grouping Has Consequences
As part of the output process, Muse collections the objects you've drawn into a hierarchy of horizontal groupings, vertical groupings, or stacks. When line breaks change in different browsers and text frames change height, when the text frames are located in this output heirarchy determines what impact the change in height has on other objects (if any).
For example, if you have a layout that looks like a 2x2 grid of text frames, by default Muse will interpret it to act as two colums. So if the first text frame gets taller it will push the text frame below it down, but won't impact the location of the two text frames in the second column.
If that's not the behavior you want, the way to tell Muse to treat things differently would be to group the two items in the first "row". This would cause the top to to be treated as a horizontal group. If anything in the group grows taller than the group, the group resizes taller and pushes the objects below it down. Thus if the top to items are grouped, if either one of them grows taller than the group it would push both the text frames below downward.
The 2x2 grid is just a simple example of the concept. In most cases you don't have to do anything special to get the behavior you want, but it is important to understand grouping has this ramification. Grouping an arbitrary set of objects on your page can result in undesired behavior when text frames resize in the browser.
For the Andriod screenshot you've provided, I don't have an immediate explanation. For us to explain what's shown we need to know the exact browser, browser version, Android version and device the screenshot is for. It would also be immensely helpful to have the URL for the page, so we can attempt to reproduce what you're seeing and view the exact code involved.

Problems with text on my macbook pro, dock not loading and blinking display

Hi guys,
if anyone can help i'll be very greatful!
I've been having problem with the text on my mac, all of the words are in gibberish and the dock won't appear,
can someone please help.

Hi gio-vio!
It seems like you are trying to view Safari in your picture. If this happens whenever you open Safari, you may find some helpful information in the following article:
Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
http://support.apple.com/kb/ts3230
If this is happening from the moment you boot into your user, then you may want to troubleshoot by attempting a Safe Boot:
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/ht1564
If the issue still persists, you may need to ultimately reinstall OS X:
OS X Mavericks: Reinstall OS X
http://support.apple.com/kb/ph13871
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Problems with text box borders, tabbing and saving doc in Acrobat Pro 7.1.0

When I view my form document in Acrobat Reader, there is a red border around several text boxes
in which I've selected 'NO border'
Also, I've selected 'column order' for tabbing, but tabs continue to function in order in which I inserted form item (text box, check box or radial button). Since I didn't insert these consecutively, tabs no jump all around the form instead of proceeding in order from top to bottm and left to right.
I've checked for Mac Acrobat Pro updates and see that there are three - 7.1.1, 7.1.3, and 7.1.4, and am downloading them for install.
Do any of the updates fix these problems? Or how can it be fixed?
On opening document in Reader, I also get a message informing that document cannot be saved with changes and must be printed, even though I've created it with fillable forms.
Is there some setting for allowing document to be saved?
I want to be able to have recipient be able to download form, fill it out, save changes, attach to email and return it to me.

This has been a problem since version 8 on the mac. Acrobat 7 on the mac worked fine with the right side trim but not on the PC.
We are still having this problem with Acrobat 9.4.0 on the Mac & PC.
This has now been an issue for 2 versions of Acrobat Pro.(8 & 9)
Being in Pre Press and having to constantly set the trim for jobs, this is now taking up too much time and costing money.
Please fix this Adobe.
and on another note. how hard would it be to display the trim (if set) next to where the page size is?
If the trim is set it should display it! why should we have to go to document/crop pages>trim.
Im in a busy Pre Press Dept and the amount of times you have to check a trim size is stupid.
I always set prefs to display crop / trim / and bleed boxes and this helps but it should display it if its set.
Thanks
Hope this is resolved soon.

I'm having some problem with Text imported from Motion into FCPro

Hey Everyone.
I've got an animation that I created in Motion.
The format for the timeline in Motion is NTSC DV 4:3
Final Cut has the same attributes to the sequence.
I have text on my graphic.... Some of it looks great. Some of it does not.
You can see it here.
http://www.drewwfilms.com/Temp/McClure/Graphic.html
The word "Show" looks terrible, where as the other text looks great.
I do have a filter on the word show... actually it's not even a filter it's just one of the style parameters which is Outline and Face. The outline attribute has a bit of a blur on it.
Still i would think this would copy over into final cut without and issue but for some reason it looks really bad.
Anyone have any ideas on this?
Thanks.
-Fraky

Your problem stems from the bright red on a dark background. It is particularly noticable on text because it is a uniform color.
You might have other elements in your movies that use this exact shade and it wiil happen there, but it is less noticable because that element consists of multiple tones and is probably moving.
Very saturated, bright reds always cause problems in video. It is a limitation of the medium.
If you want to learn more about this facinating subject, the keywords are *Chroma Rise Time*.
The solution: desaturate and/or lighten the red, change the color completely or live with it.
Once I render. I get the pixelation.
Your Motion clip is being rendered to your NTSC DV Sequence setting which is 1:5 compression.
The problem with the red is only made worse due to this.
Message was edited to answer newer information from Fraky.

Problem with text written on a image

Similar Messages

Maybe you are looking for