Problem with the 4.3.2 software update?

I have a 32GB Ipod touch and recently I have been having what seems to be software problems. I can't use apps without the Ipod skipping back to the main screen, or the recently used apps list popping up from the bottom of the screen. When left on the side it is constantly turning itself on and off which is wasting the battery. At first I just tried getting on with it however am now becoming more and more frustrated, especially when playing games as I get anywhere between 5-60 seconds gameplay before the app shuts down and I'm again faced with the homescreen. I tried turning it on and off, then tried restoring it however I'm still having the problem. Anyone else having the same problem or anyone know how to resolve it? any help would be appreciated as I feel going to the Apple shop could potentially hurt my wallet.

You might be correct on that. One of the people I support had just gone up to 4.3.2 on her iPod Touch and it's doing the exact same thing. I did a full wipe and restored everything it and the battery level went from 50% down to 20% in minutes. It also started taking me back to the main screen while I was in the Settings screen.
I then wiped it again (battery level was back to showing 50%), only this time I set it up as a new device. I configured the Exchange email on it and I could sworn I saw the battery level jump up touch without it being plugged in. I should know by Monday if it's back to normal but I have feeling this is a bug in the OS.
I'm planning on upgrading my iPad tonight but I'm probably going to hold off on my iPhone.

Similar Messages

I have a problem with my ipad when choosing software update it is continously loading the message checking for updates without showing any results

I have a problem with my ipad when choosing software update it is continously loading the message checking for updates without showing any results

Hello SuzMiller
Check out the article for the troubleshooting steps for issues with email on your iPhone and iPad.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Problem with the synchronization by Desktop Software (6.1.0.35)

Hi, i have a big problem with the synchronization by Desktop Software (6.1.0.35).
When I installed DS i set to folder sync photos not as
... Documents / BlackBerry / photo (created by default),
but i chose
... Documents / Pictures / Photos from the BlackBerry (created by me).
Basically now I try to change the import folder of images, but it appears the error that is
"Can not set a folder to import to a higher level of import folder"
I tried deleting / Photos from the BlackBerry, and not finding my DS it says:
"The import folder is not available ... etc.." and tells me to change it or with the button or the Media tab of the Device menu> Options.
I do it but the message is always the same: "Unable to set a higher level of import folder to import folder"
I find it an absurd bug and ask to help me solve it. Thanks

Well folks. I've had enough.
The 9780 is a great phone, it's easy to use, practical and dependable. However, the Desktop Manager software has been giving me too many sleepless nights. On two occassions I must add: once at the end of last year when I bought it and only managed to solve it by myself after 4 weeks of trawling through online forums, blogs and other BB help sites and the recent one was last week when I tried to install it on my new Windows 7 notebook.
I know this is not entirely the fault of RIM, Microsoft also has a part to play. But considering the state of technology these days, it shouldn't have to be so difficult. I want a phone and software that makes my life easier and not have to be a slave to it by trying days and nights to solve its problems.
Hence, I have officially decom my phone and gotten an iPhone 4 instead. The switch ain't that difficult for me as I have always been platform neutral. As long it fits my needs, does it job well and doesn't give me too much headache, I'm cool with it.
Ciao folks!

How do i delete an app that came with the latest 8.2 software update?

How do i delete an app that came with the latest 8.2 software update?

Since you can't delete apps that are part of iOS, you should try the same thing I do. I create a folder which I call Worthless and move to the last page of my iPhone. I then put all the apps that Apple includes with iOS into that folder. With the name Worthless, I never even tempted to look in there again. That is about the only thing you can do with worthless apps that are included with iOS.

I am having many problems with the CC 2014 application manager update

I have 2 seats. Thus I have CC 2014 installed on four computers. All four are high end desktops with Windows 7 Ultimate 64 bit installed, all four with the latest patches. All four also use high end nvidia graphics cards all with the latest drivers.
On all four, when I tried to update the application manager, only the frame of update the window was visible. Then, when I moused over the empty frame, the blue update button became visible, but nothing else. Since the common thread is nvidia drivers, it seems there may be a conflict. But one card is a Quadro FX 5800, another is 2x SLI NVIDIA GeForce GTX 285, another is an NVIDIA GeForce GTX 680 2GB, and the fourth is an NVIDIA GeForce GTX 780 3Gb. So all four have different cards.
I went ahead and installed the app mgr update and all the program updates on all four computers. All four had problems, two of them serious.
On one computer, there were problems booting up. The boot up problems went away when I restored to a prior image. I tried several times. The problem persisted. I finally gave up on updating this computer.
This boot up problem then happened on a second computer. I restored to a prior image and the problem went away here as well. I then tried the installs again. This time, the computer booted fine, but I lost the ability to send email. I use Thunderbird and have had no problems sending email ever (for at least the past 8 years). So I again restored to a prior image and the email problem went away. I then tried the installs a third time. Same result. Investigating, I was able to get an alternate outgoing mail server to work (that of my company site). But I never got the Verizon server to work. Incoming? Yes. But no outgoing.
On the third computer, I also had problems booting. But rebooting many times seems to have solved the problem. Unfortunately, Premiere crashes so often I've reverted to CC.
I realize that Adobe puts much work into making their software better. And I depend on it every day. But to be honest, I've just spent several whole days trying to fix broken computers. And my confidence in Adobe is at an all time low.
I so regret not staying with CC.

>regret not staying with CC
Previous via Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous

Ever since the update to OS 5 software I haven't been able to sign in with the new apple id or sign in with the former apple id (software update made me change the id and password). I've also lost ability to update apps on computer. ARGH

I can't sign into itunes on my ipad (original) since the software update. Genius can't help-says its Itunes support I need, but they don't help either (tell me to reset password) which I've done several times. Can't update apps on my home computer either. Update made me change Apple id, so now it thinks I have two ids, but won't let me sign in for old one. I pad won't work at all. Frustrated beyond belief and get NO HELP from apple.
if they want us to buy their product they better start supporting them. Oh yeah, everything worked FINE before the update.
Anyone have ideas?

No. The problem is that when you changed Apple IDs you did not update your Apple ID to reflect the change, so your phone is still associated with the old ID. You will need to un-associate it. The process is the same as what you would do if you sold the phone. See: http://support.apple.com/kb/HT5661

Problem with most recent apple combo software update

So about a month ago I posted here about a problem I'd been having for a while that others seemed to have as well, with safari crashing and for me dashboard as well. Looking at my crash report, I was advised that most likely this was a javascript error and I did an archive install of Leopard and this did fix the problem.
However, of course the Leopard from my install disk was a little old, so today when I did all the updates again, lo and behold, my problem is back. Looking at the date that the last combo update pack came out (mid June) I'm pretty sure this is when my problem started, and now its back again because I know that's one of the updates that I just did on my computer.
So my question is, has anyone else experienced problems with this recent update, and secondly, what can I do? Should I re- archive/install and not do the update, and then just wait until the next combo update? I did the updates in order to get my itunes back in order, but I don't know if it would be detrimental to my other programs to not do this last combo update... And is there anyway I can go into my system and fix this while keeping up the update? Its just strange to me that no one else I know is having this problem, even though they keep up-to-date on all the software updates.
Any help appreciated!

I get the error when I try…downloading it from the Support pages
That's very strange. Can you download anything from http://www.apple.com/support/downloads/ ?
Launch Keychain Access, select Keychain First Aid from its left-hand menu, enter your password, select verify, and click on start. If that shows any problems, then select repair. If not, select X509Anchors, click on the top item, and then click the down arrow key until you find a bad/invalid certificate.

Is anyone having problems with the new Xerox printer driver update from Apple? My 8700S is no longer working with QuarkXPress.

I allowed a System Update that included a Xerox Printer update. I am running a MacPro 10.6.8 with Quark 8.5.1 and a Xerox ColorQube 8700S. EVERY was working perfectly before the "update" but afterwards anything sent to the printer from Quark would stall the printer. I went to the Xerox website and downloaded their Printer Driver and tried again. Now I could print from Quark but I can NOT get to the printer window to change the type of paper, etc. So, the problem still persists.
Should I try going into Time Machine and trying to find the Xerox Print Driver in the Library folder?
Should I upgrade the whole system software? (I wouldn't mind doing that AFTER I get this magazine off to the commerical printer)
Should I upgrade to Quark 9?
Any help here would be apprciated.
Thanks - Rob

As a general rule of thumb, I never install updates until I read its info and I am having problems with my current software. I hide the updates until I need them. Usually this happens when I update or upgrade my os. I don't fix what ain't broken is my golden rule.
It is possible that you need to update or upgrade Quark in order for your newer printer driver to work. First I would try the following....
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
If your printer does not work afterwards, update or upgrade Quark. If that does not work, contact the printer manufacturer.

Problem with video after installing ipod software update 1.2

I recently downloaded the ipod software update version 1.2 for my ipod. It seems to have changed the video screen output as some of my videos now do not play full screen and instead have black boarders down each side of the screen while playing.
At first I thought switching off the widescreen option in the video settings screen would fix the problem but doing this cuts off a large portion of the picture at the top and bottom of the screen. I can only assume this change in screen ratio came with the update and was wondering if anyone knows of a way to fix this problem or if it will be fixed in the next ipod software update with some kind of option to switch screen ratios in the video settings menu.
I would like to keep updating my ipod but have since reset it so icould get full screen video playback and have been avioding the updates incase it happens again.

hmmmm. were those videos that you converted yourself
with QT Pro, alg2? if so, it might be worth checking
on the possibility from this document:
QuickTime Pro: DV format movies may require
adjustment for iPod
(if the source files were DV PAL, that can produce
the "bars down the side" effect ... unlike NTSC where
you get the "bars along the top" effect shown in the
graphic in the document.)
I did convert them myself but but not with quicktime pro will this solution still apply if were to purchase QT Pro or should i contact the company i bought my programme from.

Problems with the 12.0.4 CS5 update aka poor support

In my 30 years as a technical support director for national and global companies I would have been fired long ago if the customer suport I provided was as bad as this has been. Love the products -- regret the support.
Since updating to 12.0.4 from 12.0.3 a number of 3rd party plug-ins have stopped working. In talking with the respective plug-in support teams they report that some of the conduits that pass information between LR3.4 and CS5 (12.0.4) are broken and that they are attempting to fix them.
I have now been on a weeklong thread with Adobe support in which offshore support offers me canned responses and never read my responses. Case in point. In my last interaction over the last few days I've asked how to revert back to 12.0.3. Instead of a direct answer they offered another solution to the problem.
Anyone else had similar issues? The problems I'm having issues with are NIK and OnOne plugins -- not all of them but just a few. I'd reinstall from my original disks but the I'd be back to 12.0.0.

I see some indirect problems with OnOne Software's Perfect Resize product.
I have been planning to send them a note, though I imagine they're already aware of the problems.
-Noel

Problem: "Contacts the server for iphone software updates"

Hi,
Itunes starts contacting server for iphone software updates. Waited for one hour, but nothing happens.
I´ve tried several times, but no luck
Any ideas?
Thanks

Just want to add myself to the list of people with the same problem.

Problem with my Macbook not completing software update

When I open software update and search for new updates I get a long list of programs. I select install and then restart my mac. As it shuts down it says that it is configuring the install and moves about 2% across the bar where it stays even if I leave it with power over night and moves no further. Can anyone help with this?

I have to end this and I am dissapointed to not know why! All of a sudden the software updates all installed!
Am drunk now so take this as the rubbish it is! PC's are just fooking wrong and you dont know that you have caused a problem until it has wrecked your computer!
Mac's have the advantage of not working whenever you dont do anything idiotic and telling I am broke why dont I close down and you can restart and I might randomly of fixed myself! Now what I feel to be the major difference between mac's and pc's is that at this point your mac says dont know what happened but your computer seems to work, do you wnat to reboot to a different time and see if that was better? And Pc's had a cunning knack of not telling me anything was wrong and working really slowly until I got bored and brought the hammer to my pc fixing kit!

My ipad2 cannot find my HP A3050 j661b airprint printer although the printer is connected with the same wifi network.Software updates are current on all and my other labtops also work properly with this printer in the same network.Further more it used to

My Ipad 2 cant find my HP3050A j661b airprint printer although the printer is connected to the same wireless network and software updates are current on all and my other laptops also work properly with this printer.further more it used to work with my IPAD2 before when I used the old wireless router but now I changed it to HAUWEI HG231f but I set everything in the same way it was. Thanks in advance.

When you change to the new router, did you re-run the CD to re-set the new SSID and password to the printer.
Otherwise your iPad will not be able "talk" to your printer.

Problems with the 6.0 3084 software bundle

I recently upgraded to the new 6.0 3084 on my BB Curve 9330 and I am appauled by the performance. My battery life plummeted, and the upgraded software bundle was using 98% of the device RAM (so consitently so that I have been virtually unable to use my phone for little more than checking the time/wake-up alarm since I upgraded several days ago). After being so extremely frustrated with the sluggish software and horrible battery life I have now downgraded to the previous software bundle and am no longer having any issues.
Is a fix in the works? I love my BB and was excited to see an available upgrade, but I am now disappointed by the implementation. I keep telling people I choose my BB over an Android or iPhone any day... but now I'm not sure....

I too have the same problem.
Upon upgrading it (overnight and on the charger), The first day I carried my BB battery died in 3 hours. Subsequently, It took 6 hours to charge. It was virtually unusable first two days; background processes seemingly preventing me from smooth operation. On the third day, finally the BB is usable again, background processes have gone away, but the battery life is about 4 hours. Also, I noticed that the device gets very hot, even when not used, in my hip-carried "Otterbox".
I decided to purchase 2 brand new and original batteries at the tune of $40 each. I figured, if the battery life is in any way related to the battery age, perhaps it was time to replace it. Thus, I purchased two, to keep one as a spare in my travel bag. Unfortunately, this did not solve the problem; The difference between the new and old batteries is almost unremarkable.
I use it in Manhattan, NY - plenty of radio reception. No bluetooth, no wifi, no background apps or processes. Just regular email/text/voice.

Has anyone else experienced problems with the disc burner/driver software not being found?

I am trying to burn music onto a disc and it is telling me that the disc burner/driver software has not been found. Has anyone else experienced this with their MacBook Pro?

SuperDrives wear out - it seems that yours might be on the verge of a mechanical failure. I'd just replace it, buying a new drive from Other World Computing and installing it yourself (because Apple would charge a small fortune).
Clinton

Problem with the 4.3.2 software update?

Similar Messages

Maybe you are looking for