Problem with the ABAP List output while running program in background.

Hi ,
This is Sudhir S . I am trying to run a report in background which has 60 columns , but only 13 are displayed when we view it through the spool abap list .
But when I run in foreground all the 60 columns are displayed. Since the data which I am trying to fetch is large I am running the report as a background job .
I just need to know what can be done to get the 60 columns in spool abap list output.
waiting for your reply.
<removed by moderator>
With Regards
Sudhir S
Edited by: Thomas Zloch on Oct 6, 2010 1:51 PM - please do something else while waiting, all posts have the same priority here

Hi,
Check if SAP note 1226758 resolves this problem.
Regards,
Aidan

Similar Messages

I keep geting this message when trying to udate to Itunes 10.5.1 "There is a problem with the Windows Installer package. A program run as part odf the setup did not finish as expected . Contact your support prersonel or package vender"

I keep getting this message when trying to upgrade to Itunes 10.5.1
Driving me nuts trying to upgrade. What can I do to correct this?
"There is a problem with the Windows Installer package.
A program run as part odf the setup did not finish as expected .
Contact your support prersonel or package vender"

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

Windows 64Bit Itunes Error : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR."

I have a brand new HP laptop windows 64bit that is having issues installing Itunes 10.6.3. Whenever attempting to install, I get the error message : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR." I thought this was an issue with the new version, and attempted to retrieve/install older versions of Itunes and same issue occurs. I have tried other forums and resolution tips from : https://discussions.apple.com/docs/DOC-3551 and nothing still. It appears that apple installs bonjour and nothing else. I have tried extracting the itunes package and installing the executables seperately, but everytime the error stil arises. I cannot repair the apple software update as it cannot install from the error mentioned above. Looking through the logs, it shows error : 1721, problem with windows installer package.Does anyone have any suggestions on what to try?

There are so many different error and problems peopl are having.
This is a link to mine
https://discussions.apple.com/thread/3467825
I think it has to be something on Apples end.
Hopefully they fix it soon. Ive used a few GB redownloading and Im going crazy
hope this settles you a bit

HT1926 can't install quicktime or itunes on windows 7 get the error message There is a problem with the windows installer package. A program required for this install to complete could not be run

please help. Can't install quictime player or itunes on windows 7. Get the error message There is a problem with the windows installer package. A program required for this install to complete could not be run. Have followed all the steps suggested and still no luck.

thank you for trying to help. I do not have apple software update on my computer. I have tried to install several programs so i could install it but every installation will not finish and rolls back and says no changes were made to my computer so i can't install the update. I even tried to force install as administrator but nothing works. Any help would be greatly appreciated. I have windows 7 64 bit.

In the middle of the installation processing, this has appeared: "There is a problem with the windows installer package. A program is required for this install to complete could not be run." my question is, what is that specific program?

in the middle of the installation processing, this has appeared: "There is a problem with the windows installer package. A program is required for this install to complete could not be run." my question is, what is that specific program?

Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

I cant install itnes 10.6.3 on my system(Dell xps 64-bit) , ive tried everything possible by downloading it several times but it keeps telling me 'there is a problem with the windows installer package. A program required 4 dis install to cmplete cant run

i cant install itnes 10.6.3 on my system(Dell xps 64-bit) , ive tried everything possible by downloading it several times but it keeps telling me 'there is a problem with the windows installer package. A program required 4 this install to complete cannott run. Please contact your service vendor?.. Please what can i do?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

I have a problem with the touchsmart 420pc, after a running time (2 hour approx) is turned off,

good afternoon, I have a problem with the touchsmart 420pc, after a running time (2 hour approx) is turned off, probably warming, but this rare, is suddenly going slow parapadear and image.
also sounds like when damaged ballasts for lamps,
ANYONE know what could be the cuasa and / or what is causing this.
greetings and thanks in advance

Hi,
Please write your TouchSmart model number, which system are you using and country of purchase.
Resource:
How Do I Find My Model Number?
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Problem with the External send output for Portugal in Smartforms

Hello All,
I am facing an issue with a particular outtype for external send for portugal country.The print priview is of different font than original font of the form.
But When the same output type is assigned with the print output the form is showing the font with the original fonts of the form.
can any one suggest the solution for this?

Hello ,
Actually the same external send output type is working fine in the development system.This is having issue only in quality system.
And the condition records are maintained same in both dev system and quality system.
Does the capturing of Font play any Role...
I read some where that sometimes in translations a particular coutry might not hold the fonts.
Regards,
Varun

Problem with format displayed in output while using Pivot table

Hi All,
I am using Pivot table in 10.1.3.4.1 version for displaying dynamic type data. Data is coming fine but it is coming in very strange format. I have following two tables in my RTF Template.
Table1 using Pivot table
!http://farm3.static.flickr.com/2570/4092137243_924cca92ca.jpg!
Table 2 - A normal table
!http://img5.imageshack.us/img5/6651/table3p.jpg!
In the output PDF, “Table 2” shows data fine but “Table 1” shows very strange kind of behaviour if the columns exceed more than 5 in “Table 1” . If columns in Pivot table output are more than 5[at present according to my Table1 size] then columns more than 5 are shown on next page after Table 2 instead of displaying inside outer table “Table1“. Anyone has any idea what is the reason behind this strange behavior and how can I avoid it ?
Thanks
-Sookie

Hi All,
I tried including following piece of code in RTF as mentioned here: [http://winrichman.blogspot.com/2009/05/cross-tab-by-limiting-number-of-colums.html] but as a result it showed blank page in report. Nothing else.
<?variable:G11;count(xdoxslt:distinct_values(/CUST_SUMMARY/LIST_CLIENT/CLIENT/LIST_OVERALL_ASSET_ALLOC/OVERALL_ASSET_ALLOC/ASSET_LIAB_DESC))?> <?variable:numcol;5?>
<?template:table1?><?param:cellvalue;1?><?param:maxcolvalue;5?>
<?choose:?>
<?when:$cellvalue < $maxcolvalue?>
!http://farm3.static.flickr.com/2508/4104410643_f540c1d5a3_m.jpg!
<?call@inlines:table1?><?with-param:cellvalue;(number($cellvalue) + $numcol)?><?with-param:maxcolvalue;$maxcolvalue?><?end call?>
<?end when?>
<?end choose?>
<?end template?>
Also modified RTf as
C <?crosstab:c594;"//OVERALL_ASSET_ALLOC";"PORTFOLIO_NAME{,o=a,t=t}";"ASSET_LIAB_DESC{,o=a,t=t}";"PERCENT";"sum"?>
H
G <?for-each@column:$c594//C1?><?if@column:position() > $cellvalue and position() <= ($cellvalue + $numcol) ?>
ASSET_LIAB_DESC <?./H?>
E <?end if?><?end for-each?>
G <?for-each:$c594//R1?>
PORTFOLIO_NAME <?./H?>
G <?for-each@cell:.//R1C1?><?if@cell:position() > $cellvalue and position() <= ($cellvalue + $numcol) ?>
99.00% <?./M1?>
E <?end if?><?end for-each?>
E <?end for-each?>I have this as my xml
<?xml version="1.0" encoding="UTF-8"?>
<CUST_SUMMARY>
<CLIENTID>1034</CLIENTID>
<LIST_CLIENT>
<CLIENT>
<CLIENT_ID>1034</CLIENT_ID>
<LIST_OVERALL_ASSET_ALLOC>
<OVERALL_ASSET_ALLOC>
<PORTFOLIO_ID>1110</PORTFOLIO_ID>
<PORTFOLIO_NAME>RM Managed</PORTFOLIO_NAME>
<ASSET_LIAB_DESC>Alternatives</ASSET_LIAB_DESC>
<PERCENT>2.93117485730770817994482449012020516681E-03</PERCENT>
</OVERALL_ASSET_ALLOC>
<OVERALL_ASSET_ALLOC>
<PORTFOLIO_ID>1110</PORTFOLIO_ID>
<PORTFOLIO_NAME>RM Managed</PORTFOLIO_NAME>
<ASSET_LIAB_DESC>Collectables</ASSET_LIAB_DESC>
<PERCENT>1.28354604277895431879689156620000563094E-02</PERCENT>
</OVERALL_ASSET_ALLOC>
<OVERALL_ASSET_ALLOC>
<PORTFOLIO_ID>1110</PORTFOLIO_ID>
<PORTFOLIO_NAME>RM Managed</PORTFOLIO_NAME>
<ASSET_LIAB_DESC>Debt</ASSET_LIAB_DESC>
<PERCENT>3.91466115811489974032104849667369505831E-02</PERCENT>
</OVERALL_ASSET_ALLOC>
<OVERALL_ASSET_ALLOC>
<PORTFOLIO_ID>1110</PORTFOLIO_ID>
<PORTFOLIO_NAME>RM Managed</PORTFOLIO_NAME>
<ASSET_LIAB_DESC>Equity</ASSET_LIAB_DESC>
<PERCENT>8.71946226825880885538778864840827563226E-01</PERCENT>
</OVERALL_ASSET_ALLOC>
<OVERALL_ASSET_ALLOC>
<PORTFOLIO_ID>1110</PORTFOLIO_ID>
<PORTFOLIO_NAME>RM Managed</PORTFOLIO_NAME>
<ASSET_LIAB_DESC>Others</ASSET_LIAB_DESC>
<PERCENT>7.3140526307872865690096910040315224715E-02</PERCENT>
</OVERALL_ASSET_ALLOC>
<OVERALL_ASSET_ALLOC>
<PORTFOLIO_ID/>
<PORTFOLIO_NAME>Aggregate Portfolio</PORTFOLIO_NAME>
<ASSET_LIAB_DESC>Alternatives</ASSET_LIAB_DESC>
<PERCENT>2.93117485730770817994482449012020516681E-03</PERCENT>
</OVERALL_ASSET_ALLOC>
<OVERALL_ASSET_ALLOC>
<PORTFOLIO_ID/>
<PORTFOLIO_NAME>Aggregate Portfolio</PORTFOLIO_NAME>
<ASSET_LIAB_DESC>Collectables</ASSET_LIAB_DESC>
<PERCENT>1.28354604277895431879689156620000563094E-02</PERCENT>
</OVERALL_ASSET_ALLOC>
<OVERALL_ASSET_ALLOC>
<PORTFOLIO_ID/>
<PORTFOLIO_NAME>Aggregate Portfolio</PORTFOLIO_NAME>
<ASSET_LIAB_DESC>Debt</ASSET_LIAB_DESC>
<PERCENT>3.91466115811489974032104849667369505831E-02</PERCENT>
</OVERALL_ASSET_ALLOC>
<OVERALL_ASSET_ALLOC>
<PORTFOLIO_ID/>
<PORTFOLIO_NAME>Aggregate Portfolio</PORTFOLIO_NAME>
<ASSET_LIAB_DESC>Equity</ASSET_LIAB_DESC>
<PERCENT>8.71946226825880885538778864840827563226E-01</PERCENT>
</OVERALL_ASSET_ALLOC>
<OVERALL_ASSET_ALLOC>
<PORTFOLIO_ID/>
<PORTFOLIO_NAME>Aggregate Portfolio</PORTFOLIO_NAME>
<ASSET_LIAB_DESC>Others</ASSET_LIAB_DESC>
<PERCENT>7.3140526307872865690096910040315224715E-02</PERCENT>
</OVERALL_ASSET_ALLOC>
<OVERALL_ASSET_ALLOC>
<PORTFOLIO_ID/>
<PORTFOLIO_NAME>Deviation</PORTFOLIO_NAME>
<ASSET_LIAB_DESC>Alternatives</ASSET_LIAB_DESC>
<PERCENT>2.93117485730770817994482449012020516681E-03</PERCENT>
</OVERALL_ASSET_ALLOC>
<OVERALL_ASSET_ALLOC>
<PORTFOLIO_ID/>
<PORTFOLIO_NAME>Deviation</PORTFOLIO_NAME>
<ASSET_LIAB_DESC>Collectables</ASSET_LIAB_DESC>
<PERCENT>1.28354604277895431879689156620000563094E-02</PERCENT>
</OVERALL_ASSET_ALLOC>
<OVERALL_ASSET_ALLOC>
<PORTFOLIO_ID/>
<PORTFOLIO_NAME>Deviation</PORTFOLIO_NAME>
<ASSET_LIAB_DESC>Debt</ASSET_LIAB_DESC>
<PERCENT>-3.6085338841885100259678951503326304942E-01</PERCENT>
</OVERALL_ASSET_ALLOC>
<OVERALL_ASSET_ALLOC>
<PORTFOLIO_ID/>
<PORTFOLIO_NAME>Deviation</PORTFOLIO_NAME>
<ASSET_LIAB_DESC>Equity</ASSET_LIAB_DESC>
<PERCENT>2.71946226825880885538778864840827563226E-01</PERCENT>
</OVERALL_ASSET_ALLOC>
<OVERALL_ASSET_ALLOC>
<PORTFOLIO_ID/>
<PORTFOLIO_NAME>Deviation</PORTFOLIO_NAME>
<ASSET_LIAB_DESC>Others</ASSET_LIAB_DESC>
<PERCENT>7.3140526307872865690096910040315224715E-02</PERCENT>
</OVERALL_ASSET_ALLOC>
<OVERALL_ASSET_ALLOC>
<PORTFOLIO_ID/>
<PORTFOLIO_NAME>Deviation</PORTFOLIO_NAME>
<ASSET_LIAB_DESC>Cash</ASSET_LIAB_DESC>
<PERCENT>.3</PERCENT>
</OVERALL_ASSET_ALLOC>
<OVERALL_ASSET_ALLOC>
<PORTFOLIO_ID/>
<PORTFOLIO_NAME>Recommended Allocation</PORTFOLIO_NAME>
<ASSET_LIAB_DESC>Debt</ASSET_LIAB_DESC>
<PERCENT>.4</PERCENT>
</OVERALL_ASSET_ALLOC>
<OVERALL_ASSET_ALLOC>
<PORTFOLIO_ID/>
<PORTFOLIO_NAME>Recommended Allocation</PORTFOLIO_NAME>
<ASSET_LIAB_DESC>Equity</ASSET_LIAB_DESC>
<PERCENT>.3</PERCENT>
</OVERALL_ASSET_ALLOC>
<OVERALL_ASSET_ALLOC>
<PORTFOLIO_ID/>
<PORTFOLIO_NAME>Recommended Allocation</PORTFOLIO_NAME>
<ASSET_LIAB_DESC>Cash</ASSET_LIAB_DESC>
<PERCENT>.3</PERCENT>
</OVERALL_ASSET_ALLOC>
</LIST_OVERALL_ASSET_ALLOC>
</CLIENT>
</LIST_CLIENT>
</CUST_SUMMARY>and Original RTF looks like !http://farm3.static.flickr.com/2508/4104410643_f540c1d5a3_m.jpg!
with code as
C <?crosstab:c594;"//OVERALL_ASSET_ALLOC";"PORTFOLIO_NAME{,o=a,t=t}";"ASSET_LIAB_DESC{,o=a,t=t}";"PERCENT";"sum"?>
H <?horizontal-break-table:1?>
G <?for-each@column:$c594//C1?>
ASSET_LIAB_DESC <?./H?>
E <?end for-each?>
G <?for-each:$c594//R1?>
PORTFOLIO_NAME <?./H?>
G <?for-each@cell:.//R1C1?>
99.00% <?./M1?>
E <?end for-each?>
E <?end for-each?>Anyone can now tell my mistake? What wrong I am doing? Why it is showing blank page in output? How to solve this page breaking problem?
Thanks
-Sookie

Help! I have problem with the ABAP trial version SP11

I have downloaded the two rar file but failed in extracting them. the setup file is reported as damaged during extracting. I tried many times of re-extract and re-download. but fail always. What could be the problem?

When you download, the internet connection should NOT be interrupted. If it drops for few seconds also download files will be corrupted..you need to download again..
Raja T

Problems with the shortcut keys... possible programming defect

I have a white MacBook '09.
All keys work except zero key.
But, my shortcut functions don't work. I.e. command and c, to copy something. But the command and c work independently. Also, what's weird is that other short cut functions involving command work, like command and a, to select everything.
I took it to the apple store, and he said there was mold and rust in it. I took it home and opened it up, and there wasn't anything, I cleaned what dirt I did see. Still nothing.
After a few search engine tests, I found solutions for deleting programs under system preferences>users, nothing. Also found the one for moving com.apple.universalaccess.plist to the desktop and restarting. Still nothing.
Any other suggestions?
Thanks.

Hello again greg_the_man. I, unfortunately, do not have any other solutions. I have had a simliar issue on a notebook of mine for a long time in which the back button for media players randomly activates. This makes music or video worthless when the issue arises, so I understand how frustrating it can be.
The only article I was able to find only mentions the method we've already tried. However, I do know that on some models (I am pretty sure this only applies to the ProBook line of notebooks, but it is worth a shot) have a seperate "function key support" installed. I am sure you would have noticed this in your list of installed applications but check again just in case.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

When trying to download itunes 10 I receive this message at the end of the install.There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.

When trying to download itunes 10 I receive this message at the end of the install.There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.

There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Getting error and cannot download itunes. says there is a problem with the windows installer package. a program required for the install to be complete could not be run. any ideas?

getting an error downloading itunes 64bit for windows 7. says there is a problem with the windows installer package. a program required for the install to be complete could not be run. any ideas? i uninstalled it last night when it would not open.

Just in case, let's try a standalone AppleSoftwareUpdate.msi install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleSoftwareUpdate.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If not, what error message do you get? (Precise text, please.)

ABAP List Output Printing Error

Hi All,
I am facing a problem while printing the ABAP List Output. First Page is printing fine and from the second page its not printing. Where as in Standard reports everything is printing OK.
Thanks in Advance.
Best regards,
Shahid Malayil

Hello Shahid,
For list printing: Add to affected reports with NEW-PAGE PRINT ON LAYOUT/ SUBMIT... TO SAP-SPOOL LAYOUT (print at list generation). For printing from list display, adjust REPORT width specification to force selection of the format and move format to SAP namespace (name "X....").
May be this can help you.
Cheers
Mudassir.

Unable to install itunes 10,5.I receive this message: there is a problem with this window installer package. A program required for nthis install to complete could not run. Contact your support personnel or package vendor.Am using window ultimate 64 bits

I am unable to install itunes 10,5. I receive this message: There is a problem with this window installer package. A program required for this install to complete could not run. Contact your support personnel or package vendor. I am using window 7 ultimate 64 bits

There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Problem with the ABAP List output while running program in background.

Similar Messages

Maybe you are looking for