Problem with the audio editor window into logic pro X

hello everybody, I have a problem with the audio editor window ! the "onglet" (sorry I don't know the word in english) "file and track" doesn't appear in the top of the audio editor window ! I can just make no destructive data, I have no access to Normalize and others audio fonctions ! could you help me ? in advance I thank you
Alain

'onglet' - great, my favorite when visiting restaurants in France!
Anyway, I think you have to activate Advanced tools first:
http://help.apple.com/logicpro/mac/10/#lgcp5cbf192f
Have a nice day!

Similar Messages

Satellite U300-13U - iTunes has detected a problem with the audio config

Please can someone help me? I've got a U300-13U laptop and have just installed iTunes on it. However, when I open iTunes I get an error message saying that "iTunes has detected a problem with the audio configuration and may not play properly" That's an understatement - it doesn't play at all!
I've uninstalled, reinstalled both iTunes and Quicktime but to no avail. I've searched and exhausted the iTunes support boards but got nowhere either. The sound is fine as I can play CDs with no issues at all. The only suggestion that I can get is that there may be a problem with audio device not liking Apple and vice versa.
Does anyone have ANY idea at all as to what might be going on here? I'm completely out of my depth, I'm just a simple girl who wants to play her music!!!
Thanks ever so.

Hello
I dont use iTunes so Im not an expert with this player but first of all you should give us some important informations:
- What OS do you use?
- Are you using the factory settings (Toshiba recovery disk) or your own Windows version
- Do you have yellow exclamation marks in device manager?
Ok, iTunes told you that there is a audio configuration problem so did you try to update the sound driver? If not, you should try it.
Check the Toshiba website for an update and see what happens. Then post your result:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Greets

Trying to get my fcp project to burn to dvd at the highest quality? Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

I suspect you are attempting to burn an HD DVD, which will not play on a DVD player...
But if you provide more details such as the settings you are applying in Compressor, then we would be able to provide you more accurate information.
How are you adding the files to Compressor?
In FCP, what are your footage properties (command-9) and sequence settings (command-0)

Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?

Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
Any way to fix it?

only $99, i thought it was closer to $175.

I have a problem with the audio on a movie I downloaded

I am having a problem with the audio on a movie that I downloaded. It is scratchy and difficult to listen to. How can I fix this?

Depending upon what country that you are in (films can't be re-downloaded in all countries) then try deleting the film from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes (or delete it from your iOS device and redownload it via the Purchased tab in the iTunes Store app on it)
If you aren't in a country where you can re-download films or if it re-downloads with the same problem then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

HELLO, I HAVE THE SNOW OF LEOAPARD 10.6.8, I WOULD LIKE TO UPDATE THE LAST LION. I WOULD LIKE TO KNOW IF THERE ARE PROBLEMS WITH THE SOFTWARE COMPATIBILITY NOW, EXAMPLES: LOGIC, REASON, SUITE ADOBE CS5 ... THANK YOU

HELLO, I HAVE THE SNOW LEOAPARD 10.6.8, I WOULD LIKE TO UPDATE THE LAST LION. I WOULD LIKE TO KNOW IF THERE ARE PROBLEMS WITH THE SOFTWARE COMPATIBILITY NOW, (EXAMPLES: LOGIC, REASON, SUITE ADOBE CS5 ...) THANK YOU!

Have a look here:
http://applehelpwriter.com/2011/07/24/will-my-old-apps-work-with-lion/
(Like any website owner, I may (or may not) derive compensation from my website)

I have a problem with the audio playback .

I have a problem with the audio playback .
I have two animations structurally identical.
If I view with safari okay, if I see with chorme for mac the first works, the second the audio does not start by itself, but only when I pause the animation ! !
Where am I wrong?
Here's the file.
https://www.dropbox.com/s/5ec8pwfcss1isoh/test01.zip?dl=0

Need you to share the Edge composition file whose animation has the issue.

I have a problem with the audio

Hi, i am from Venezuela, i don't to speak very well the english, i hope your can understand me.
My computer is a HP 15 Notebook PC 15-f039wm and this present a problem with the audio.
It stard last month, i didn't give importanc, but lately the problem with the audio is more annoying, sound stutters and present failure in a less time by -05Seconds but everytime is more cotinued. And i was to reading in a fore and muchs person present the same problem!, and someone published a parcht to the problem but for a "Sony", and the parcht i don't funcione me, can your help me?.
Please, it is my email: [Personal Information Removed]
Excuse the spelling, your remember that i dont know to speak english.

Back up all data before making any changes.
If you've installed something called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and reboot. You should do that even if the software is not causing the problem, because it's useless.
If you've installed an equalizer called "Boom" or anything similar, update or delete it and reboot.
If there's no improvement, or if you're not aware of having installed anything that fits the description, post again.

Problems with the audio jacks

I just received my factory refurb Thinkstation C30. I'm having problems with the integrated audio. I'm using Windows 8.1 Pro, installed myself over the factory Windows 7. It seems to be detecting the headphones incorrectly. The internal speaker never does anything, in any case. When the headphones are plugged into the front headphone jack, the Realtek control panel thinks its the pink jack, and the microphone tab appears. Plugged into the microphone jack, it thinks its the green and pink jack, and flickers rapidly between plugged in and not plugged in on the pink jack, microphone tab appears on and off.
Now for the back jack:
Blue identifies as blue, line in tab appears.
Green indentifies as both pink and blue (somehow), line in and microphone tab appear.
Pink idenfies as pink, with rapid on/off disconnecting. Microphone tab appears and disappears repeatedly.
The behavior seems to be the same with the generic Microsoft high definition audio driver, I installed the specific one off of the driver page to after I observed this behavior.
No sound ever happens from the headphones or internal speaker. In the sound control panel, my options are speakers on Realtek High Definition Audio, and AMD HDMI output (which I use for my speaker system). On my previous computer, plugging in headphones to the front panel would switch the output from HDMI to headphones automatically.
I do have 99 days left on the warranty if I need any parts for this, I'm wondering if the wiring in the USB/headphone jack assembly is whacky.

Silly question, but have you checked the orange connector that runs from the front panel to the motherboard to ensure it's plugged in correctly?
The fact that you're seeing ports flip back and forth between two different kind if inputs (or outputs) is odd. These ports do support jack sensing, but I would expect the flickering symptom you're describing. The fact that you're also not getting any output from the internal speaker in any condition is also concerning.
I'd inspect the cabling carefully to ensure everything is connected correctly and there is not apparent damage to the cables themselves. If everything looks good there, I'd probably go the warranty route. The problem certainly seems HW related from what you're describing.

Problem with the audio when creating optimized media...

I am having a problem with the quality of my audio after I transcode the clip to optimized media. It sounds fine originally, and I have listened to the clips when I first import them, and they sound fine, it's only after they're optimized that they sound bad. There is a clicking sound that is randomly distributed throughout the clip. I thought at first that maybe this would be fixed after I published the content, as the whole point of optimized media was to make it lesser quality to improve performance while editing, but even when published the clicks could be heard distinctly. I tried editing the content with out optimizing the mdeia, but the editing is too slow as I am working with high quality media.
Has anyone had this problem? Anyone have an idea on how to I might be able to fix this?

One way would be to make sure the Preferences window under the Import tab says not to use optimized media. Then go to the timeline and Control Click the clip. Choose Reveal in Event Browser. This will select the clip in the event browser. The originally specified in and out points will be represented in the yellow border on the clip. Then in the File menu choose the Import ... Files and specify the original media. The clip in the event browser will be filled in again from the new import, and the timeline clip will also be replaced with the new material. In and out points will be honored and effects will still be in place on the timeline clip.
Now, I use this procedure to reconnect clips all the time ... I have not used it before to switch formats from optimized to original media so there is a little guessing here on my part. The option, of course, is to simply reimport from a camera archive or the camera of the SD card into a new clip then replace everything ... Again, this would need to be done having turned off the preference item to use optimized media. Hope this helps a little. Best wishes.
stephen

Detected problem with the audio configuration

Hi guys, can anyone help me with this problem?
i really have no idea how this error occured. Coz i didnt do anything with the audio configuration.
I worked well before i updated the iTunes.
The error is:
"The iTunes cannot run because it has detected a problem with your audio configuration"
Thanks...

Have you had a chance to look at this troubleshooting page? It may be of some help: iTunes 7 for Windows: iTunes has detected an audio configuration problem

Problems with the sound in Windows

Hey everybody, hoping someone can help.
I'm working with Cubase in Windows with my mac and i have problems with the sound, but not all the time.
I have an M-Audio card connected and while i'm playing something in Cubase, the sound makes a digital distortion just for 10 seconds, and then again sounds perfect and then again comes back the digital crash, somekind of loop. So i was thinking that maybe was a problem with the drivers of my M-Audio card, but then i was playing a song in Winnamp with the built-in speakers and happens exactly the same, so i think it's a problem with the Mac drivers for Windows, i use the same audio card in MacOsX and i don't have problems
I have tried various display settings. I have no idea if this is just me or a common problem.
Thanks in advance...
MacBook Pro 2.16 GHz Intel Core 2 Duo Mac OS X (10.4.8)

This is not a BOOT CAMP Problem. It is a WINDOWS XP Problem. Either he didn't install the drivers for the sound card. (Which is Realtek High Definition Audio) or the Windows XP audio driver (WNMM) is corrupt.
Go to Device manager and under Sound, Video and Game controllers you should see a little yellow question mark under the WNMM driver. If this is the case he needs to uninstall the driver and reboot. It will then reinstall itself and should work properly after that.
MAC PRO Mac OS X (10.4.9)

Problem With the audio with flash player

i write because i have problem with teh audio in alls videos
of flash i have the latest version of flash but i cann´t
listen nothing somebody could help me? pelase thanks!!!!!

I have the same problem I have unistalled and reinstalled at least 5 times sometimes it wont even install. I have removed chrome as well. the audio does not work on IE8, chrome or firefox. I have tried to check the codecs as well to no effect. I believe this has to be a problem with windows xp since it plays fine on my vista and windows 7 systems. Any help would be greatly appreciated.

ITunes cannot run because it has detected a problem with the audio config.

I didn't make any audio changes, but since I startet up my laptop the last time there occures allways a warning pop up when I'm trying to open iTunes. The pop up contains the following message: "iTunes cannot run because it has detected a problem with your audio configuration".
And there is just the possibility to click the "close" button on the pop up.
So now uninstalled and re-installed the newest version of iTunes, but this didn't solve the problem. I allso searched through the audio settings in the control panel area. But I dind't find any false settings, or maybe I just don't know where the problem is.
Does someone know what the problem could be. Or did someone have similar problems and found a way tosolve it?
Could it be possible that another audio program such as winamp media player creates a problem for the startup of iTunes?
Thanxx a lot for any helpfull replies, cheers sal

typically, that error message is caused by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
the following document may be of some assistance:
iTunes 7 for Windows: iTunes has detected an audio configuration problem

Problem with the Audio when rendering !

Hi guys !
i just finished a project that i was working on..and i have been trying to render it down with the audio.
The problem is, i get the audio and everything, but always at the very start, i get that audio scratch (sounds like a scratched CD) and always at the beginning for like 1 second, then its back to normal !
My export setting is Quicktime movie if that helps!
Any of you are familiar with that problem ?
Thanks in advance guys !

There are about a zillion, well maybe not a zillion but there are a lot of Quicktime Codecs. Audio, but default should be good if your original is good. If the original audio is an MP3 and you are using an earlier version of AE you must convert the original audio to something elce and replace it.
More info about your system and your settings would help a bunch.

Problem with the audio editor window into logic pro X

Similar Messages

Maybe you are looking for