Problem with the audit ALEAUD

Hi,
I have a scenario SAP --idoc-> PI JMS>
The IDOC is branched into 12 JMS message and an audit (ALEAUD) is sent back to SAP for each inbound JMS message.
Everything is working fine except that some of the ALEAUD IDOC going back to SAP stays in status 51 with the error:
" Error when locking the audit statistics "
Half the ALEAUD are successfull (Status = 53) and the other half is in error (Status = 51)
Any idea?
Thanks,
Martin

Hi Martin,
Check Note 573991 - COM: ALEAUD IDocs for several objects of one message type
Kind regards,
Caio Cagnani

Similar Messages

Problem with the XI-Audit log entries in the table "XI_AF_MSG_AUDIT"

Hi,
I have an async-szenarios for PO:
We send Idoc's from SAP ERP to a WebService via SOAP. And we take Ack's. We use Integrationsprocess with deadline block to catche the errors after the retrying (three times) and to send they via e-mail.
Our problem is, the number of the audit logs in the table "XI_AF_MSG_AUDIT":
In the RTW only we see one audit log (with three retries) in an error case. But in the table XI_AF_MSG_AUDIT there are about 76 entries for the same audit log in the error case and about 20 entries in the case of the succuessfull processing.
This number of the entries in the table causes problem with the size of the redo log file and delete job of cours the large size of the table and therefore problem on the data base. The table can not be controlled. The delete job can not run and cancels every time due this redo log problems
What can cause that?
How can it be prevented, that so much entries are not be made in the table "XI_AF_MSG_AUDIT".
Best regards
Gueltekin

Hi Gueltekin,
I am only aware of the general property auditLogEnabled of J2EE Engine Service SAP XI AF Core, which controls in general (default = true) that entries in the AF Message Audit log are written at all.
(see [http://help.sap.com/saphelp_nw70/helpdata/en/5c/22ee41c334c717e10000000a155106/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/5c/22ee41c334c717e10000000a155106/frameset.htm])
I assume that your scenarios in the error case is sending up to three messages and for each message the number of audit log infos are created. You might want to check the detailed entries in the log and see from where they are comming, you might use customer modules etc. as well.
Best regards,
Silvia

There's a problem with the recipient's mailbox. Please try resending this message.

I have a user who cannot receive a message from a particular external sender. That senders assistant (same domain and server as the external sender with the issue) is able to forward the exact same message to my user and it arrives as it should. In
message tracking, I can see the message came in through my smart host, through my front end and to the users mailbox server, where an NDR was generated. We had the assistant forward us the NDR and it says:
There's a problem with the recipient's mailbox. Please try resending this message. If the problem continues, please contact your helpdesk.
From my 3rd party smart host/spam filter, I have a copy of the message in audit and when I forward it to myself, the same thing happens - it generates an NDR when it arrives at my Exchange mailbox server. This makes me conclude that my end users mailbox
isn't corrupt, rather it's something in the message header that our server doesn't like (I've seen this happen with other senders as well, but it is extremely rare and random).
Details/facts of my environment:
-Current production messaging system is Exchange 2003.
-Working on Exchange 2010 co-existence.
-This problem between this sender and us has been an issue before the introduction of Exchange 2010.
-I'm hoping to begin end user mailbox migrations to 2010 and will have the sender try again at that time, but I still have testing to do with our voice messaging system before I can begin moving end user mailboxes.
....Begin redacted NDR detail....
Remote Server returned '< #5.2.1>'
Original message headers:
Received: from fe.mydomain.com ([192.168.1.10]) by
mailboxsrv.mydomain.com with Microsoft SMTPSVC(6.0.3790.4675);      Thu, 4 Sep
2014 12:49:48 -0700
Received: from exc2010.mydomain.com ([192.168.1.50]) by
fe.mydomain.com with Microsoft SMTPSVC(6.0.3790.4675);        Thu, 4 Sep
2014 12:49:47 -0700
Received: from smtp.mydomain.com (192.168.1.49) by exch2010.mydomain.com
(192.168.1.50) with Microsoft SMTP Server (TLS) id 14.3.210.2; Thu, 4 Sep 2014
12:49:47 -0700
Received: from pps.filterd (PPMail.mydomain.com [127.0.0.1])   by
PPMail.gsblaw.com (8.14.5/8.14.5) with SMTP id s84Jkb0n023682       for
<[email protected]>; Thu, 4 Sep 2014 12:49:47 -0700
Received: from na01-by2-obe.outbound.protection.outlook.com
(mail-by2on0098.outbound.protection.outlook.com [TheirIP])    by
PPMail.gsblaw.com with ESMTP id 1p6da7h0jw-1 (version=TLSv1/SSLv3
cipher=AES256-SHA bits=256 verify=NOT)       for <[email protected]>; Thu, 04 Sep
2014 12:49:42 -0700
Received: from Theirexchange.theirdomain.com (TheirinternalIP) by
Theirexchange.theirdomain.com (TheirinternalIP) with Microsoft SMTP
Server (TLS) id 15.0.1019.16; Thu, 4 Sep 2014 19:49:38 +0000
Received: from Theirexchange.theirdomain.com ([10.141.86.14]) by
Theirexchange.theirdomain.com ([TheirinternalIP]) with mapi id
15.00.1019.015; Thu, 4 Sep 2014 19:49:38 +0000
Content-Type: multipart/mixed;
        boundary="_000_9a166afd24964edda2d5439ba3dbe712DM2PR08MB445namprd08pro_"
From: Mr Sender <[email protected]>
To: My User <[email protected]>, "Another external recipient ([email protected])"
        <[email protected]>
Subject: FW: A Subject
Thread-Topic: A Subject
Thread-Index: Ac/C2zn97ruwXQpoQtGNrjKOr1NckgFmNoeAAAEpQ2A=
Date: Thu, 4 Sep 2014 19:49:37 +0000
Message-ID: <[email protected]domain.com>
References: <[email protected]domain.com>
<[email protected]ET>
In-Reply-To: <>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator: <[email protected]domain.com>
x-ms-exchange-transport-fromentityheader: Hosted
x-originating-ip: [internetIP]
x-microsoft-antispam: BCL:0;PCL:0;RULEID:;UriScan:;
x-forefront-prvs: 0324C2C0E2
x-forefront-antispam-report: SFV:NSPM;SFS:(10009015)(6009001)(189002)(199003)(377454003)(164054003)(64706001)(66066001)(19609705001)(15202345003)(50986999)(19300405004)(19625215002)(90102001)(80022001)(20776003)(83322001)(101416001)(99936001)(76176999)(54356999)(81542001)(21056001)(19580395003)(86362001)(4396001)(92566001)(16236675004)(85852003)(551944002)(74502001)(83072002)(87936001)(74662001)(31966008)(107886001)(81342001)(76482001)(46102001)(85306004)(105586002)(33646002)(15975445006)(99396002)(76576001)(74316001)(77982001)(79102001)(95666004)(108616004)(2656002)(106356001)(99286002)(24736002);DIR:OUT;SFP:1101;SCL:1;SRVR:DM2PR08MB446;H:DM2PR08MB445.namprd08.prod.outlook.com;FPR:;MLV:sfv;PTR:InfoNoRecords;MX:1;A:1;LANG:en;
MIME-Version: 1.0
X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:5.12.52,1.0.27,0.0.0000
definitions=2014-09-04_03:2014-09-04,2014-09-04,1970-01-01 signatures=0
X-Proofpoint-Spam-Reason: safe
Return-Path: [email protected]
X-OriginalArrivalTime: 04 Sep 2014 19:49:47.0046 (UTC) FILETIME=[61900460:01CFC879]

A little more discovery...
From my smart host/SPAM filter audit folder, I could see the message was received with a 2 meg "winmail.dat" file. Yesterday, I had attempted redirecting the message to my own mailbox, and it bounced. I decided to try redirecting the message
to a 2010 mailbox, and the message arrived. It had 3 attachments, 1 Word doc, and 2 PDF files. So, this appears to be an encoding issue with the winmail.dat file. Any work arounds/reasons for winmail.dat from being rejected at the mailbox
server? Once it made it to a 2010 mailbox/client, I was able to forward to a 2003 mailbox no problem.

Problem with WCS Audit status missmatch after upgrade

We had problem with wcs Audit status missmatch after upgrade to 7.0.164.3 WLC : 6.0.188.0.
how I can fix the problem?

Hi,
Try pinging the WCS from the WLC and vice versa and then try again to refresh config from controllers.. then follow the below if its still not happening..
Please forwrd the trace level logs from the WCS (Specifically WCS0.0.TXT logs) while recreating the issue!!
Regards
Surendra

I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)" more........ .

Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I can not upgrade to quicktime 7.7.3 for windows vista. Error message says there is a problem with the program installer. Any clue as to how to get around this.

I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?

The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

Having Problems With The Neo2 ? Read This!!!!

Hi,
i just bought a neo2 motherboard, with a p4 2,6 HT and 512 mb Kingston hyper ram ( 2 peaces of 256, else it won't use the dual bandwith :D)
In the beginning everything seemed fine, until i got some sudden reboots and other vague stuff. I read it could be the SB audigy messing things up. I removed the card and windows Xp pro runs fine now. no more sudden reboots or explorer not resonding crashes.
But, i still had problems with games crashing. I got reboots. After i set the "automatic reboot after crash" to false, i got blue screens or lock-ups in my games.
I wondered what it could be. Then i started to put my videocard ( a radeon 9700 pro 128 mb) in agp 4x mode instead of agp 8x! Now my games run without crashes, but benchmarks are not that high. 4780 marks with 3dmark 2003.
I think i will send msi and Ati a mail concerning this problem. I don't know if it is PSU related. Maybe the videocard demands a little more power in agp 8x mode.
Well, having probs with you're NEO2 ??
remove the sb Audigy and turn the agp back to 4 using smartgart ( it's located in you're display settings screen ).
First i tought it was a PSU related problem, because i swapped my 350 Watt enermax with a Q-tec 400 watt psu. The 400 watt PSU died while i was gaming. Maybe the enermax is the better PSU :D So, it could still be a PSU related problem. Maybe the agp 8x settings demands a lot more from you're psu. Anyway, i'll receive a 550 watt Antec PSU soon, so i can check this out....
Btw. I cant run the motherboard in anything better than "slow" mode. In all other modes Xp won't boot. I haven't tryed it since the AGP is at 4X, but i don't think it will matter.
Regards,
Welcome to the real world NEO :D

Ok.....
i raised the memory voltage setting in the bios from 2.65 to 2.8 and the agp voltage from 1.5 to 1.7
Everything seems fine, but games crash back to the desktop now without an error message or the either lockup.
Whatever i do, i can't make the mobo crash in anything but games!
Btw. the following message caught my attention, when i ran f1 2002 with directx 8.1. Since i have directx 9, i haven't seen it anymore. Maybe because the ati-drivers are made for directx 9....
// Watchdog Event Log File
LogType: Watchdog
Created: 2003-10-04 02:02:53
TimeZone: -60 - West-Europa (standaardtijd)
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 9
Shutdown: 0
EaRecovery: 1
EventCount: 2
BreakCount: 2
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: ati2dvag
EventFlag: 1
DeviceClass: Display
DeviceDescription: RADEON 9700 PRO
HardwareID: PCI\VEN_1002&DEV_4E44&SUBSYS_00021002&REV_00
Manufacturer: ATI Technologies Inc.
DriverFixedFileInfo: FEEF04BD 00010000 0006000E 000A18EA 0006000E 000A18EA 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: ATI Technologies Inc.
DriverFileDescription: ATI Radeon WindowsNT Display Driver
DriverFileVersion: 6.14.10.6378
DriverInternalName: ati2dvag.dll
DriverLegalCopyright: Copyright (C) 1998-2002 ATI Technologies Inc.
DriverOriginalFilename: ati2dvag.dll
DriverProductName: ATI Radeon Family
DriverProductVersion: 5.2.3790.2
I wish i had another videocard to test. My radeon 9700 pro is getting suspicious...
Regards,
The real world

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

HT4864 I am getting a triangle with an exclamation point next to my inbox...it says: There may be a problem with the mail server or network. Verify the settings for account "MobileMe" or try again. The server returned the error: Mail was unable to log in

I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailable

Also if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.

Problems with the O2 blackberry data package on my Curve 3G.

I have already informed O2 about this but they claim that I should be used the blackberry support services, but nothing there helps me!
I got my Blackberry Curve 3G on September 9th this year and I put on the Blackberry Data Package bolt-on onto my phone on September 16th. I then received a text to say they've taken £5 from my credit and it will be up and running in the next 24 hours. Its now September 19th and my BBM is not working at all and I am extremely upset with the services and behaviour I have received from both O2 and Blackberry.
Is there any way you can help? If this fails, I shall be forced to go back to the shop from where I got my Blackberry from and ask for their help.
Many thanks, Jade.

Can a bubble whistle Problems with the O2 blackberry data package on my Curve 3G.? The seat matures in your oar. The lad ices the pursuing method inside a resident. A judge spins against the vendor! The rose wows the hello.
filipina heart

Many problems with the 'Export to Text' (.txt) in CR Xi

Hi,
I have listed many problems with the 'Export to Text' (.txt) function of CR Xi.
These problems are related to this export format only (meaning everything works fine in the Viewer or in the 'Export to PDF')...
- Multi-columns layout do not export as Multi-column (export only a one column);
- Numeric values with parenthesis for negative values or with a fix currency sign at the leftmost position are not exported correctly;
- Fields having a Suppress formula which is "WhilePrintingRecords" do not appears when exported;
- Fields with 'Suppress double value' checked are not always suppressed when exported to Text.
- 'Keep Group Together' flag is not working.
- 'Reset Page Number After' simply does not works when exported to text;
- 'Keep object together' on TextBox/Section is not working.
- Whenever a group is ending on the last line of a page, the the following page as the same Group header as the previous group with no records until the page is filled, then the PageBreak and PageHeader is missing but the records of the following group appears.
I would like to know what is the status of the 'Export to Text' function (is it a deprecated function not supported anymore???).
If still supported, when will these bugs be fixed???
Thanks

Hi Rene
Export to Text is supported till date. Crystal Reports 2008 also supports this with Keep together working however when I tried with format with multiple columns, it didnot show up in the exported text file.
Regards
Sourashree

When going to update it says there is a billing problem with the previous purchase, I went in to fix it but it won't let me download it. How do I fix this problem?

When going to update it says there is a billing problem with the previous purchase when I go to update it still won't let me download and all the info is correct. How do I fix this?

You have to email iTunes Store Support about this issue now. You can get started here. Change the country in the upper right if necessary.
https://ssl.apple.com/emea/support/itunes/contact.html

Problem with the audit ALEAUD

Similar Messages

Maybe you are looking for