Problem with the behaviour of input ready key figure

Dear All,
I am using one input ready key figure in a globally reusable key figure structure for my planning layout. When the input ready query is executed as such, the i/p ready key figure is readily available for inputting any data (as expected), but the moment the global reference from the key figure structure is removed in the query designer (from the context menu - > Remove Reference), that i/p ready key figure structure turns out to be non input ready and hence no entering of data is then possible.
I am removing the reference from the structure for some other editing purpose but the above mentioned problem comes in between.
The only input that i can provide is that this i/p ready key figure utilizes two hidden inverse formulas, but eventhough things are fine when the reference is not removed.

Hello Durgesh,
I suspect this to be a bug. Please open a customer message so SAP support can analyze the issue (include technical names of the original query with global structure and your new query where the reference was removed; put it on component BW-PLA-IP-QD).
Regards,
Marc
SAP Techology RIG

Similar Messages

Formula Functions are not working for Input Ready Key Figure

Hi all,
I have created an Input Ready report in BI IP, which is containg number of Characteristics / Key Fig. / Formula Functions.
Here, when I am executing this report, it is throwing below message only for formula functions I am using in the report (where Qty is INPUT READY). Since, by-default formula functions always remain "Not Input Ready"
"WARNING BRAIN (160): Total Importl / APR
Qty cannot be input ready. It is formula element.".
Best Regards,
Jatin

Thank you for your kind reply.
Actually, the issue I am facing here is with formula functions (NOT INPUT READY) which I am using in the report is colliding with Qty (INPUT READY) and throwing error during execution (Not giving me even variable screen).
And also, when I try to change an existing report. It opens in Display mode only.
Please help!
Best Regards,
Jatin

Problems with creating badi implementation for virtual key figures

Hi,
I'm running BI 7.0 (unicode).
I have been trying to follow this blog to calculate the virtual keyfigure in my infoset - Using Virtual Key Figure and Characteris in an InfoSet
My infoset includes 1 infocube, and 3 master data infoobjects. I have created everything the blog was referring to, and activated fine. However, it seems that when the field symbols are assigned from the c_s_data structure, they do not get referenced correctly, so that no correct memory area is assigned and instead the whole c_s_data structure is assigned to the field symbol, which prevents me from referencing the right mem area correctly.
For example, in this statement
ASSIGN COMPONENT P_CHA_ZMYINFOSET___F120 OF STRUCTURE c_s_data
TO <fs_ZMYINFOSET___F120>.
the component p_cha_zmyinfoset___F120 of c_s_data supposed to be assigned to the field symbol (point to the correct place in structure c_s_data). In other words when this statement is executed, the program looks at structure c_s_data, finds the component zmyinfoset___F120 in it, and assignes the position of that component in the structure to the field symbol, so that it could be referenced in the code. However, the correct assignment does not happen.
When I debug the code and view the structure c_s_data, I can never find any component with any of the names I can find in my BEX query like ZMYINFOSET___F120. All I see are the components that are named like these: Z____5179 (C_S_DATA-Z____5179), C_S_DATA-S____5150, etc. I see the correct values, but components all have weired names like that. I thought in Infosets the components are named in the following fashion: INFOSETNAME___FXXX which you can see from your BEX query designer. Why is this happening? Why don't I see the correct names in the c_s_data structure? If instead I try to assign those components with their weired names directly, I still get incorrect assignment.
what am I doing wrong?
I was reading abap help on this statement: assign COMPONENT comp OF STRUCTURE struc
and the following I found:
With this expression for mem_area, the memory area of a component comp of a structure struc is assigned to the field symbol. While the structure struc is specified directly, a data object must be specified for comp. The evaluation depends on the data type of comp:
If the field comp has a non-text, elementary type, the content is converted to the type i and interpreted as a position of the component in the structure. if the value for comp is 0, the storage area of the entire structure is assigned to the field symbol.
From what it says above, my value for comp is always 0, so that the entire structure is always assigned to my field symbol instead of a specific position in that structure.
please let me know what is wrong here.
thanks.
Edited by: AG on Oct 11, 2008 10:41 AM
Edited by: AG on Oct 11, 2008 10:42 AM

Hi,
I am facing the similar issue. Can you please tell me how you solved this problem in more details?
which sample code and how u can find that in SE24 and where to copy that code.
Thanks in advance..
vamsi.

Bug: problems with the Escape key

Hi all,
In an attempt to get around real estate problems, I set my Dell 24" monitor in portrait mode. Logic 8 behaves as it should most of the time. However, there appears to be a problem with the Escape key. Most of the time, the Tools menu doesn't appear until you mouse out of the editing areas (eg into the menu area above the piano roll).
Clearly, Logic should just take its resolution and screen dimensions from the OS but there appears to be a problem in extreme portrait mode.
I'll report this but wanted to check that I'm not being an absolute and total plonker first. Anybody confirm this behaviour?
Thanks!
Pete

that sounds like a memory issue. have you tried reorganizing memory?

Problem with the volume keys on my keyboard.

Hey everybody,
I have a problem with the volume keys on my keyboard. This started a couple days ago and I can't seem to figure out how to fix it. When I press the volume up or down buttons, the graphic appears on the screen as it normally would, but has no effect on the volume of the sound coming out of my speakers. Therefore, the only way to change the volume of music or whatever I am listening to is to use the volume control within the program/website itself (itunes, youtube, etc.) Even changing the volume on the volume icon at the menu bar on top of the screen does nothing. If anyone has an idea of how to go about solving this issue, I would greatly appreciate it. Thanks!

First look into the Preference > Sound > Outpur whether internal Speakers are choosen.
The only Preference to delete I can discover is com.apple.systempreferences.plist in your home Library folder. You can try to move it out to the desktop for example, not to loose all your settings. Restart and see whether the problem still persists. If you don't know how to do this here some Terminal (Applications > Utilities) commands. Enter them by copy and paste followed by <enter>
mv ~/Library/Preferences/com.apple.systempreferences.plist ~/Desktop/
restart
to get it back:
mv ~/Desktop/com.apple.systempreferences.plist ~/Library/Preferences/
confirm with "y" if you are asked to replace this file.
marek

I have a new hard drive and itunes and my computer (windows XP) no longer recognise my ipod. I also had the problem with the registry keys not being present but this has now been fixed. However i can no longer link my ipod up with itunes.

When I first tried itunes with my new hard drive there was the problem with the registry keys but something also flagged up about needing a signed driver. Is this anything to do with why Itunes and my computer no longer recognises when my ipod is linked up? Whatever i try under 'devices' my ipod is never available to sync up. If anyone can help I would be most grateful.

Thanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
I've tried windows update but this doesn't do anything as '...the service is not running'.
Any suggestions?

I had a problem with the hard disk on a 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB and when I tried to erase and format It fails with input/output error. Any help much appreciated!

I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!

Zap the PRAM and Reset the SMC, then try again.

How do I save a PDF ready for print. I have a problem with the fonts. The fonts are blurry after pri

How do I save a PDF ready for print. I have a problem with the fonts. The fonts are blurry after printing. There is a trick in saving PDF.

Hi el_giclee,
Important to note from the beginning is that when you create your Photoshop document make sure you chose 300 Pixels/inch as your resolution.
I'm interested in seeing your Save Adobe PDF dialog box after you choose to save the PDF.
Could you post a screenshot of this dialog box with the Compression menu selected on the left side?
It's a good idea to select High Quality Print or Press Quality in the Adobe PDF Preset menu at the top of this box. It will automatically select the best default settings for a printed piece.
Michael

Problem with the input file format to be stored in database

Hi,
I am facing some problem with the input format. I am using the table name as data.employee. But i could not able to process the message forward. I am getting this error,
com.ibm.db2.jcc.c.SqlException: java.sql.Connection.close() requested while a transaction is in progress on the connection.The transaction remains active, and the connection cannot be closed.
Can you please help me prposing a solution for this format.
Thanks,
SOorya

I think you are missing out the COMMIT operation.
At the DB2 end before closing the connection if you do a 'COMMIT' then this may remove your error.
i.e. after you close the Resultset>close the statement object> perform 'COMMIT' operation--> then close the connection.
Also refer :-
http://www.dbforums.com/archive/index.php/t-976407.html
http://www.dbforums.com/showthread.php?t=1628183
I hope this will help you.
Thanks,
Vijaya

I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?

I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?

Check System Preferences > Sound > Output
Make sure the correct device is selected.

Display Problem with the Key Figures

Hi,
I working on the query where i need to display three Key Figures. I have no problem with the first two Key Figures , but the third Key figure values need to be display by day wise. (0Calday). i.e., the third key figure value should be displayed based no of days 0Calday has.
For Example if 0Calday is holding 4 days... then third keyfigure Value should be display as 4 columns with their respective values by dividing into day wise, remaining first two key figures should not be changed.
When i am trying to call the 0Calday into the Column, all the three Key Figures values are displaying as many as no of days 0calday has.
For Example if 0Calday has 2 day....the three Key Figures are values are breaking into two days values and displaying, so totally we can see 6 Key figure values. But i need first two values should not break but the last key figure should be divide into two days as values and display.
Thanks & Regards
Agama.

Hi Venkat
This can be achieved by supressing 0 values.
1) In the Query Designer: Go toquery properties
2) Select Suppress Zeros
3) Select option Active
4) Under Effect On : try with Column or row o (Not infront of system , so cannot exactly remember)
This will allow you to get the exact result as per your requirement. We had the same issue and we could resolve this by following this.
Hope it helps.
Cheers

I have a problem with the keyboar.when i push the key enter it doens't work

i have a problem with the keyboar.when i push the key enter it doens't work

Final Cut Express was discontinued about 18 months ago, before the release of Lion (10.7). It is no longer a supported product and was never supported on Lion, nor on Mountain Lion.
While some FCE users have had success running FCE on Lion, many have reported problems including problems with chroma keying. I do not recall any solution to the chroma keying problem, but you might try searching this Forum to see what others have discovered or tried.
Final Cut Pro X is the app supported on Lion & Mountain Lion, and the future direction Apple has taken. Since your computer lab has already moved to Lion (10.7.5) and presumably will move to Mountain Lion in the future, you should begin the process of moving to Final Cut Pro X. I appreciate there are implications for cost, training, inconvenience and re-doing lesson plans. But technology moves on and at some point we need to move with it too.

Hello, I have a problem with the keyboard of the device, some of the keys do not respond. What can I do? Amit

Hello,
I have a problem with the keyboard of the device, some of the keys do not respond.
What can I do?
Amit

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings (if you can)
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Problem with the power key of the iphone 5 (ios 6.1.2)

so... i've been having many problems with my iPhone 5's power key since two weeks.
I bought it last dicember. I always have to click 10-15 times before the iPhone turns off or on...
somebody says that that happens because of the software IOS 6.1.2 but I don't know...

if it's under warrenty I would take it in

Problems with the Proxy Programme--Please help

Hi All,
I have written a simple proxy server in the form of a servlet. I changed the proxy config of my browser to connect to this servlet hosted on the default context(http://localhost:8080) of the Tomcat 5.0.25 . Well , this servlet internally connects to the proxy of the corporate LAN . The logic that I have applied is as follows. The servlet gets the request from the client (ie the browser in this case) , extracts the headers and contents from the request, sets them to a new request that it forms and finally send this new request to the proxy. When the proxy responds, the servlet collects the response headers and contents adn writes them in its response. To sum up , this servlet transparently carries the requests and responses between the client(browser) and the corporate LAN proxy. Now the problem is this. Let's say , now I am accessing http://www.google.com.The browser sends a request to my servlet with the following headers as they are extracted by my servlet.
ProxyServer:::>posting request
ProxyServer:::>headerValue::> headerName = accept : headerValue=*/*
ProxyServer:::>headerValue::> headerName = referer : headerValue=http://www.google.com/
ProxyServer:::>headerValue::> headerName = accept-language : headerValue=en-us
ProxyServer:::>headerValue::> headerName = proxy-connection : headerValue=Keep-Alive
ProxyServer:::>headerValue::> headerName = user-agent : headerValue=Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; UB1.4_IE6.0_SP1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
ProxyServer:::>headerValue::> headerName = host : headerValue=www.google.com
ProxyServer:::>headerValue::> headerName = cookie : headerValue=PREF=ID=1be27c0a74f198ca:TM=1082058853:LM=1082058853:S=bu6ORrygzm8AUkm8
ProxyServer:::>postRequest
I set these headers into a new connection opened to the proxy and post a fresh request to the proxy,which, in turn responds with the following headers.
ProxyServer:::>posted request successfully
ProxyServer:::>writing response
ProxyServer:::>writeResponse-->headerName = Proxy-Connection : headerValue = [close]
ProxyServer:::>writeResponse-->headerName = Content-Length : headerValue = [257]
ProxyServer:::>writeResponse-->headerName = Date : headerValue = [Tue, 13 Jul 2004 14:01:40 GMT]
ProxyServer:::>writeResponse-->headerName = Content-Type : headerValue = [text/html]
ProxyServer:::>writeResponse-->headerName = Server : headerValue = [NetCache appliance (NetApp/5.5R2)]
ProxyServer:::>writeResponse-->headerName = Proxy-Authenticate : headerValue = [Basic realm="Charlotte - napxyclt2"]
ProxyServer:::>writeResponse-->headerName = null : headerValue = [HTTP/1.1 407 Proxy Authentication Required]
ProxyServer:::>writeResponse exiting
ProxyServer:::>wrote response successfully
I write these headers back to the client. According to what I was thinking, the client ie the browser would open a new dialog box asking for username/password owing to the presence of the "Proxy-Authenticate " header. But it does not happen that way. Rather the browser stops responsding and displays a blank page. Does anyone know why it happens this way? I am pasting the server prog below for everybody's reference.
package server.proxy;
//import all servlet related classes
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.io.*;
import java.net.*;
import server.resources.*;
//My Proxy server --->Currently it is very simplea and relies on
//other proxy servers of an already connected network.
public class ProxyServer extends HttpServlet
//stores the resource bundle
private ServerResBundle resBundle = null;
//checks for the mode of operation
private boolean proxySet = false;
private String proxy = null;
//storing the original System out/err etc
private PrintStream sysOutOrig = null;
private PrintStream sysErrOrig = null;
private InputStream sysInOrig = null;
//initialise certain features that are required later
public void init() throws ServletException
try
//initialise the resource bundle
this.initResBundle();
System.out.println("ProxyServer:::>res bundle init");
//set the mode of operation
this.setMode();
System.out.println("ProxyServer:::>mode set");
//set the system out and err --System.setOut etc
this.setSystemOutErr();
System.out.println("ProxyServer:::>in/out/err set");
}//End try
catch(Exception e)
System.out.println("Exception in init..."+(e.getMessage()));
throw new ServletException(e);
}//Edn
catch(Throwable e)
System.out.println("Irrecoverable Error...");
throw new ServletException(e);
}//End
}//End init
//method to init the resource bundle;
private void initResBundle()
this.resBundle = ServerResBundle.getBundle();
}//End
//method to set the mode of the server--proxy or direct
private void setMode()
//read the target proxy property from the bundle and
//if it is set,take that URL
String temp = (String)(this.resBundle.getResource(ResKeys.PROXY_SERVER));
if ( (temp != null) && (temp.length() > 0) )
this.proxySet = true;
this.proxy = temp;
temp = null;
}//End
}//End
//method to set the system out and err etc
private void setSystemOutErr() throws Exception
//keep a copy of the original system out and error
this.sysOutOrig = System.out;
this.sysErrOrig = System.err;
try
//read the options adn if they are set, take the values directly
String newOutStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_OUT));
String newErrStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_ERR));
if ((newOutStr != null) && (newOutStr.length() > 0))
System.setOut(new PrintStream(new FileOutputStream(new File(newOutStr),true),true));
}//End if
if ((newErrStr != null) && (newErrStr.length() > 0))
System.setErr(new PrintStream(new FileOutputStream(new File(newErrStr),true),true));
}//End if
}//End
catch(Exception e)
//restore the stuff
System.setOut(this.sysOutOrig);
System.setErr(this.sysErrOrig);
}//End
}//End
//this is where the proxy functionalities will be embedded
public void service(HttpServletRequest req,HttpServletResponse resp)
throws ServletException,java.io.IOException
//conenction URL
URL target = null;
//conenction to the remote object
URLConnection targetConn = null;
//stores the OOS and the OIS
ObjectOutputStream oos = null;
ObjectInputStream ois = null;
try
//check for the mode of operation
if (proxySet)
URLConnection objects go through two phases: first they are created, then they are connected.
After being created, and before being connected, various options can be specified
(e.g., doInput and UseCaches). After connecting, it is an error to try to set them.
Operations that depend on being connected, like getContentLength, will implicitly perform the connection,
if necessary.
//for the URL to the proxy
target=new URL(this.proxy);
//conenct to the proxy
targetConn = target.openConnection();
//set the details of the connectuon
targetConn.setDoInput(true);
targetConn.setDoOutput(true);
targetConn.setUseCaches(false);
// If true, this URL is being examined in a context in which it makes sense to allow user interactions such as popping up an authentication dialog. If false, then no user interaction is allowed
targetConn.setAllowUserInteraction(true);
//connect to the remote object
// targetConn.connect();//call this only when all the request properties are set
System.out.println("ProxyServer:::>posting request");
//post the received request to the URL
this.postRequest(targetConn,req);
System.out.println("ProxyServer:::>posted request successfully");
System.out.println("ProxyServer:::>writing response");
//receive the response
//write the received response to the client
this.writeResponse(targetConn,resp);
System.out.println("ProxyServer:::>wrote response successfully");
}//End if
else
//currently this functionality is not supported
throw new ServletException(
(String)(this.resBundle.getResource(ResKeys.ERR_FUNC_NOTSUPPORTED)));
}//End
}//End try
catch(Exception e)
if(e instanceof ServletException)
throw (ServletException)e;
}//End
if (e instanceof IOException)
throw (IOException)e;
}//End
//wrap it up in ServletException
throw new ServletException(e);
}//End
}//End
//method to write the response back to the client
private void writeResponse(URLConnection targetConn,HttpServletResponse resp)
throws ServletException
//get all the header fields from the response connection and set them to the
//response of the servlet
Map headerFields = null;
Iterator headerFieldEntries = null;
Map.Entry header = null;
//stores the input stream to the conn
BufferedReader brConn = null;
//stores the writer to the response
PrintWriter prResp = null;
//checks if the proxy authentication needed or not
boolean proxyAuthReqd = false;
try
//juste ensuring that the proxy authentication is reset
proxyAuthReqd = false;
if( (targetConn != null) && (resp != null) )
//Returns an unmodifiable Map of the header fields.
//The Map keys are Strings that represent the response-header field names.
//Each Map value is an unmodifiable List of Strings that represents the corresponding
//field values
headerFields = targetConn.getHeaderFields();
//Returns a set view of the mappings contained in this map
Set temp = headerFields.entrySet();
//Returns an iterator over the elements in this set
headerFieldEntries = temp.iterator();
if (headerFieldEntries != null)
while (headerFieldEntries.hasNext())
Object tempHeader = headerFieldEntries.next();
if (tempHeader instanceof Map.Entry)
header = (Map.Entry)tempHeader;
Object headerName = header.getKey();
Object headerValue=header.getValue();
System.out.println("ProxyServer:::>writeResponse-->headerName = "+headerName+" : headerValue = "+headerValue);
//do not select the key-value pair if both the key adn the value are null
if ( ( headerName == null) && (headerValue == null) )
continue;
}//Enmd
if (headerValue != null)
List headerValList = null;
if (headerValue instanceof List)
headerValList = (List)headerValue;
}//End
if(headerValList != null)
for (int i=0;i<headerValList.size();i++)
Object headerValueStr = headerValList.get(i);
if (headerValueStr instanceof String)
//note that the header-key can not be null for addHeader
//I have made this temporary provision to make the programme work.
resp.addHeader(( (headerName==null)? ("null_header"+i) :(String)headerName),
(String)headerValueStr);
//check if the proxy authentication required or not
if (((String)headerValueStr).
indexOf(resp.SC_PROXY_AUTHENTICATION_REQUIRED+"") != -1)
System.out.println("ProxyServer:::>writeResponse-->proxy auth needed");
//proxy authentication is needed
proxyAuthReqd = true;
}//End
}//Ednd of
else if (headerValueStr == null)
resp.addHeader(( (headerName==null)? null :(String)headerName),
null);
}//End
}//End for
}//End if
}//End if
}//End
}//End while
}//End if
//get the writer to the client
prResp = resp.getWriter();
System.out.println("ProxyServer:::>writeResponse-->proxyAuthReqd="+proxyAuthReqd);
//juste test a simple header
System.out.println("Proxy-Authenticate = "+(resp.containsHeader("Proxy-Authenticate")));
//if the proxy asks you for authentication,pass on the same to the client
//from whom you have received the request.When this flag is true,the connection
//is closed by the remotehost adn hence any attempt to open in input steram
//results in an error ie IOException
if (!proxyAuthReqd)
//now get the content adn write it to the response too
brConn = new BufferedReader(new InputStreamReader(
targetConn.getInputStream()));
String tempStr = null;
while ((tempStr = brConn.readLine())!=null)
prResp.println(tempStr);
}//End while
//close the connections
brConn.close();
}//End if
else
prResp.println("Proxy Authentication needed...");
}//End
//close the streams
prResp.flush();
prResp.close();
}//End if
System.out.println("ProxyServer:::>writeResponse exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
//method to post request to the internet
private void postRequest(URLConnection targetConn,HttpServletRequest req)
throws ServletException
//extract the header parameters and the body content from the incoming request
//and set them to the new connection
Enumeration reqHeaders = null;
//reads the incoming request's content
BufferedReader brReqRd = null;
PrintWriter prResWt = null;
//stores temp header names and values
String headerName = null;
String headerValue = null;
try
if( (targetConn != null) && (req != null) )
reqHeaders = req.getHeaderNames();
//extract a header adn set it to the new connection
while (reqHeaders.hasMoreElements())
headerName = (String)(reqHeaders.nextElement());
headerValue = req.getHeader(headerName);
targetConn.setRequestProperty(headerName,headerValue);
System.out.println("ProxyServer:::>headerValue::> headerName = "+headerName+" : headerValue="+headerValue);
}//End
System.out.println("ProxyServer:::>postRequest\n");
//establis the actual connection
//calling this method bfore the above loop results in IllegalStateException
targetConn.connect();
//NOTE : try reading from and writing into OIS and OOS respectively
//now read the contents and write them to the connection
// brReqRd = req.getReader(); //this hangs for some reason
brReqRd = new BufferedReader(new InputStreamReader(req.getInputStream()));
System.out.println("Got the reader..brReqRd = "+brReqRd);
if (brReqRd != null)
String temp = null;
//establish the printwriter
// prResWt = new PrintWriter(targetConn.getOutputStream(),true);
prResWt = new PrintWriter(targetConn.getOutputStream());
System.out.println("trying to read in a loop from brReqRd.. ready="+(brReqRd.ready()));
while( (brReqRd.ready()) && ((temp=brReqRd.readLine()) != null) )
System.out.println("In while::>temp = "+temp);
prResWt.println(temp);
}//Emd while
//close the streams adn go back
brReqRd.close();
prResWt.flush();
prResWt.close();
}//End
}//End outer if
System.out.println("ProxyServer:::>postRequest exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
}//End

Hi serlank ,
Thanks for your reply. Well , I initially I thought of not pasting the code,as it was too long. But I could not help it,as I thought I must show in code what I exactly meant. That's why I followed a description of my problem with the code. You could probably have copied the code and pasted it in one of your favourite editors to take a look at it. Did you,by any chance, try to read it on the browser? And as regards reposting the same message, I can say that I did it as I felt the subject was not quite appropriate in the first posting and I was not sure as to how I could delete/alter the posting. I am not asking for a code-fix,but some suggestions from some one who might ever have come across such a thing.Anyway, lemme know if you have any idea on it. Thanks...

Problem with the behaviour of input ready key figure

Similar Messages

Maybe you are looking for