Problem with the built in mic. HELP!

ok so basically when i plug in my earphone the built in mic doesnt work. when i plug the earphone out it works so idk wats the problem y cant the mic work?

Because the 2013 does not have any audio inputs only outputs
http://support.apple.com/kb/HT6024

Similar Messages

Problem with the built in ram HELP

Hi I am in Shock, last week I was processing a huge file over 300 MB and suddenly my great IBook crashed, I re booted it and it made a HZZZZ sound and an error about memory appeared. After re starting it for the second time it went back to work fine, and without any problem.
This is the spooky part: I was showing the configuration to a colleague today and it displayed only the 512 MB extra ram I added when bought, but for the built in ram it said EMPTY SLOT!!!!
Please help, what can I do?
Can I buy a spare? can I still use my lap top in this condition?
Or do I have to get a new one?

That's real strange....Are you sure it's not the other way around with an empty added ram slot? and are you sure you had the extra ram when you bought it and maybe it was accidentally not installed by manuafacturer as you had hoped and you had 512 all along. As for the HZZZ sound, no clue. I assume it's still under warranty, call Apple. Geof

Problems with the Built in Camera - Help!

Dear Comunity,
In my Mac Book, when I turn on the built In camera, I get 4 horizontal red lines in the midle of the screen. i have the standard version of Leopard. Is there something I can do to change this?
Thank you very much for your help

Hello DUARTE
Drivers for OS X apps are built into Mac OS OS. There are no drivers to reload for use with OS X.
Try all relevant suggestions in How to Troubleshoot iSight.
If you are still getting red lines on your display when you turn the camera on with any app in any user account you try, see your AASP for service.
EZ Jim
PowerBook 1.67 G

Can I Record My Acoustic Guitar With The Built-in Mic?

Hi everybody!
I've been wondering that can i record the acoustic sound of my guitar with the built-in micro in my Powerbook G4?
Because my guitar doesn't have the out-put port for the cable that's why i want to use the Mic included in the PWB or the one built-in in my webcam(with USP port)....
Could anybody tell me how to set it up please?Thanks for your helps.
ibook G4 8oomhz 640mb Mac OS X (10.3.9)

By Default your PowerBooks should be ready to record with the PB's Built-Mic. just create a New Basic Track and hit record.
--HangTime [Will Compute for Food] %-|>

Problems with the Proxy Programme--Please help

Hi All,
I have written a simple proxy server in the form of a servlet. I changed the proxy config of my browser to connect to this servlet hosted on the default context(http://localhost:8080) of the Tomcat 5.0.25 . Well , this servlet internally connects to the proxy of the corporate LAN . The logic that I have applied is as follows. The servlet gets the request from the client (ie the browser in this case) , extracts the headers and contents from the request, sets them to a new request that it forms and finally send this new request to the proxy. When the proxy responds, the servlet collects the response headers and contents adn writes them in its response. To sum up , this servlet transparently carries the requests and responses between the client(browser) and the corporate LAN proxy. Now the problem is this. Let's say , now I am accessing http://www.google.com.The browser sends a request to my servlet with the following headers as they are extracted by my servlet.
ProxyServer:::>posting request
ProxyServer:::>headerValue::> headerName = accept : headerValue=*/*
ProxyServer:::>headerValue::> headerName = referer : headerValue=http://www.google.com/
ProxyServer:::>headerValue::> headerName = accept-language : headerValue=en-us
ProxyServer:::>headerValue::> headerName = proxy-connection : headerValue=Keep-Alive
ProxyServer:::>headerValue::> headerName = user-agent : headerValue=Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; UB1.4_IE6.0_SP1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
ProxyServer:::>headerValue::> headerName = host : headerValue=www.google.com
ProxyServer:::>headerValue::> headerName = cookie : headerValue=PREF=ID=1be27c0a74f198ca:TM=1082058853:LM=1082058853:S=bu6ORrygzm8AUkm8
ProxyServer:::>postRequest
I set these headers into a new connection opened to the proxy and post a fresh request to the proxy,which, in turn responds with the following headers.
ProxyServer:::>posted request successfully
ProxyServer:::>writing response
ProxyServer:::>writeResponse-->headerName = Proxy-Connection : headerValue = [close]
ProxyServer:::>writeResponse-->headerName = Content-Length : headerValue = [257]
ProxyServer:::>writeResponse-->headerName = Date : headerValue = [Tue, 13 Jul 2004 14:01:40 GMT]
ProxyServer:::>writeResponse-->headerName = Content-Type : headerValue = [text/html]
ProxyServer:::>writeResponse-->headerName = Server : headerValue = [NetCache appliance (NetApp/5.5R2)]
ProxyServer:::>writeResponse-->headerName = Proxy-Authenticate : headerValue = [Basic realm="Charlotte - napxyclt2"]
ProxyServer:::>writeResponse-->headerName = null : headerValue = [HTTP/1.1 407 Proxy Authentication Required]
ProxyServer:::>writeResponse exiting
ProxyServer:::>wrote response successfully
I write these headers back to the client. According to what I was thinking, the client ie the browser would open a new dialog box asking for username/password owing to the presence of the "Proxy-Authenticate " header. But it does not happen that way. Rather the browser stops responsding and displays a blank page. Does anyone know why it happens this way? I am pasting the server prog below for everybody's reference.
package server.proxy;
//import all servlet related classes
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.io.*;
import java.net.*;
import server.resources.*;
//My Proxy server --->Currently it is very simplea and relies on
//other proxy servers of an already connected network.
public class ProxyServer extends HttpServlet
//stores the resource bundle
private ServerResBundle resBundle = null;
//checks for the mode of operation
private boolean proxySet = false;
private String proxy = null;
//storing the original System out/err etc
private PrintStream sysOutOrig = null;
private PrintStream sysErrOrig = null;
private InputStream sysInOrig = null;
//initialise certain features that are required later
public void init() throws ServletException
try
//initialise the resource bundle
this.initResBundle();
System.out.println("ProxyServer:::>res bundle init");
//set the mode of operation
this.setMode();
System.out.println("ProxyServer:::>mode set");
//set the system out and err --System.setOut etc
this.setSystemOutErr();
System.out.println("ProxyServer:::>in/out/err set");
}//End try
catch(Exception e)
System.out.println("Exception in init..."+(e.getMessage()));
throw new ServletException(e);
}//Edn
catch(Throwable e)
System.out.println("Irrecoverable Error...");
throw new ServletException(e);
}//End
}//End init
//method to init the resource bundle;
private void initResBundle()
this.resBundle = ServerResBundle.getBundle();
}//End
//method to set the mode of the server--proxy or direct
private void setMode()
//read the target proxy property from the bundle and
//if it is set,take that URL
String temp = (String)(this.resBundle.getResource(ResKeys.PROXY_SERVER));
if ( (temp != null) && (temp.length() > 0) )
this.proxySet = true;
this.proxy = temp;
temp = null;
}//End
}//End
//method to set the system out and err etc
private void setSystemOutErr() throws Exception
//keep a copy of the original system out and error
this.sysOutOrig = System.out;
this.sysErrOrig = System.err;
try
//read the options adn if they are set, take the values directly
String newOutStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_OUT));
String newErrStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_ERR));
if ((newOutStr != null) && (newOutStr.length() > 0))
System.setOut(new PrintStream(new FileOutputStream(new File(newOutStr),true),true));
}//End if
if ((newErrStr != null) && (newErrStr.length() > 0))
System.setErr(new PrintStream(new FileOutputStream(new File(newErrStr),true),true));
}//End if
}//End
catch(Exception e)
//restore the stuff
System.setOut(this.sysOutOrig);
System.setErr(this.sysErrOrig);
}//End
}//End
//this is where the proxy functionalities will be embedded
public void service(HttpServletRequest req,HttpServletResponse resp)
throws ServletException,java.io.IOException
//conenction URL
URL target = null;
//conenction to the remote object
URLConnection targetConn = null;
//stores the OOS and the OIS
ObjectOutputStream oos = null;
ObjectInputStream ois = null;
try
//check for the mode of operation
if (proxySet)
URLConnection objects go through two phases: first they are created, then they are connected.
After being created, and before being connected, various options can be specified
(e.g., doInput and UseCaches). After connecting, it is an error to try to set them.
Operations that depend on being connected, like getContentLength, will implicitly perform the connection,
if necessary.
//for the URL to the proxy
target=new URL(this.proxy);
//conenct to the proxy
targetConn = target.openConnection();
//set the details of the connectuon
targetConn.setDoInput(true);
targetConn.setDoOutput(true);
targetConn.setUseCaches(false);
// If true, this URL is being examined in a context in which it makes sense to allow user interactions such as popping up an authentication dialog. If false, then no user interaction is allowed
targetConn.setAllowUserInteraction(true);
//connect to the remote object
// targetConn.connect();//call this only when all the request properties are set
System.out.println("ProxyServer:::>posting request");
//post the received request to the URL
this.postRequest(targetConn,req);
System.out.println("ProxyServer:::>posted request successfully");
System.out.println("ProxyServer:::>writing response");
//receive the response
//write the received response to the client
this.writeResponse(targetConn,resp);
System.out.println("ProxyServer:::>wrote response successfully");
}//End if
else
//currently this functionality is not supported
throw new ServletException(
(String)(this.resBundle.getResource(ResKeys.ERR_FUNC_NOTSUPPORTED)));
}//End
}//End try
catch(Exception e)
if(e instanceof ServletException)
throw (ServletException)e;
}//End
if (e instanceof IOException)
throw (IOException)e;
}//End
//wrap it up in ServletException
throw new ServletException(e);
}//End
}//End
//method to write the response back to the client
private void writeResponse(URLConnection targetConn,HttpServletResponse resp)
throws ServletException
//get all the header fields from the response connection and set them to the
//response of the servlet
Map headerFields = null;
Iterator headerFieldEntries = null;
Map.Entry header = null;
//stores the input stream to the conn
BufferedReader brConn = null;
//stores the writer to the response
PrintWriter prResp = null;
//checks if the proxy authentication needed or not
boolean proxyAuthReqd = false;
try
//juste ensuring that the proxy authentication is reset
proxyAuthReqd = false;
if( (targetConn != null) && (resp != null) )
//Returns an unmodifiable Map of the header fields.
//The Map keys are Strings that represent the response-header field names.
//Each Map value is an unmodifiable List of Strings that represents the corresponding
//field values
headerFields = targetConn.getHeaderFields();
//Returns a set view of the mappings contained in this map
Set temp = headerFields.entrySet();
//Returns an iterator over the elements in this set
headerFieldEntries = temp.iterator();
if (headerFieldEntries != null)
while (headerFieldEntries.hasNext())
Object tempHeader = headerFieldEntries.next();
if (tempHeader instanceof Map.Entry)
header = (Map.Entry)tempHeader;
Object headerName = header.getKey();
Object headerValue=header.getValue();
System.out.println("ProxyServer:::>writeResponse-->headerName = "+headerName+" : headerValue = "+headerValue);
//do not select the key-value pair if both the key adn the value are null
if ( ( headerName == null) && (headerValue == null) )
continue;
}//Enmd
if (headerValue != null)
List headerValList = null;
if (headerValue instanceof List)
headerValList = (List)headerValue;
}//End
if(headerValList != null)
for (int i=0;i<headerValList.size();i++)
Object headerValueStr = headerValList.get(i);
if (headerValueStr instanceof String)
//note that the header-key can not be null for addHeader
//I have made this temporary provision to make the programme work.
resp.addHeader(( (headerName==null)? ("null_header"+i) :(String)headerName),
(String)headerValueStr);
//check if the proxy authentication required or not
if (((String)headerValueStr).
indexOf(resp.SC_PROXY_AUTHENTICATION_REQUIRED+"") != -1)
System.out.println("ProxyServer:::>writeResponse-->proxy auth needed");
//proxy authentication is needed
proxyAuthReqd = true;
}//End
}//Ednd of
else if (headerValueStr == null)
resp.addHeader(( (headerName==null)? null :(String)headerName),
null);
}//End
}//End for
}//End if
}//End if
}//End
}//End while
}//End if
//get the writer to the client
prResp = resp.getWriter();
System.out.println("ProxyServer:::>writeResponse-->proxyAuthReqd="+proxyAuthReqd);
//juste test a simple header
System.out.println("Proxy-Authenticate = "+(resp.containsHeader("Proxy-Authenticate")));
//if the proxy asks you for authentication,pass on the same to the client
//from whom you have received the request.When this flag is true,the connection
//is closed by the remotehost adn hence any attempt to open in input steram
//results in an error ie IOException
if (!proxyAuthReqd)
//now get the content adn write it to the response too
brConn = new BufferedReader(new InputStreamReader(
targetConn.getInputStream()));
String tempStr = null;
while ((tempStr = brConn.readLine())!=null)
prResp.println(tempStr);
}//End while
//close the connections
brConn.close();
}//End if
else
prResp.println("Proxy Authentication needed...");
}//End
//close the streams
prResp.flush();
prResp.close();
}//End if
System.out.println("ProxyServer:::>writeResponse exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
//method to post request to the internet
private void postRequest(URLConnection targetConn,HttpServletRequest req)
throws ServletException
//extract the header parameters and the body content from the incoming request
//and set them to the new connection
Enumeration reqHeaders = null;
//reads the incoming request's content
BufferedReader brReqRd = null;
PrintWriter prResWt = null;
//stores temp header names and values
String headerName = null;
String headerValue = null;
try
if( (targetConn != null) && (req != null) )
reqHeaders = req.getHeaderNames();
//extract a header adn set it to the new connection
while (reqHeaders.hasMoreElements())
headerName = (String)(reqHeaders.nextElement());
headerValue = req.getHeader(headerName);
targetConn.setRequestProperty(headerName,headerValue);
System.out.println("ProxyServer:::>headerValue::> headerName = "+headerName+" : headerValue="+headerValue);
}//End
System.out.println("ProxyServer:::>postRequest\n");
//establis the actual connection
//calling this method bfore the above loop results in IllegalStateException
targetConn.connect();
//NOTE : try reading from and writing into OIS and OOS respectively
//now read the contents and write them to the connection
// brReqRd = req.getReader(); //this hangs for some reason
brReqRd = new BufferedReader(new InputStreamReader(req.getInputStream()));
System.out.println("Got the reader..brReqRd = "+brReqRd);
if (brReqRd != null)
String temp = null;
//establish the printwriter
// prResWt = new PrintWriter(targetConn.getOutputStream(),true);
prResWt = new PrintWriter(targetConn.getOutputStream());
System.out.println("trying to read in a loop from brReqRd.. ready="+(brReqRd.ready()));
while( (brReqRd.ready()) && ((temp=brReqRd.readLine()) != null) )
System.out.println("In while::>temp = "+temp);
prResWt.println(temp);
}//Emd while
//close the streams adn go back
brReqRd.close();
prResWt.flush();
prResWt.close();
}//End
}//End outer if
System.out.println("ProxyServer:::>postRequest exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
}//End

Hi serlank ,
Thanks for your reply. Well , I initially I thought of not pasting the code,as it was too long. But I could not help it,as I thought I must show in code what I exactly meant. That's why I followed a description of my problem with the code. You could probably have copied the code and pasted it in one of your favourite editors to take a look at it. Did you,by any chance, try to read it on the browser? And as regards reposting the same message, I can say that I did it as I felt the subject was not quite appropriate in the first posting and I was not sure as to how I could delete/alter the posting. I am not asking for a code-fix,but some suggestions from some one who might ever have come across such a thing.Anyway, lemme know if you have any idea on it. Thanks...

A problem with the BBM Bold9900 please help me !!

Hey All , i have a probem with my BBM , when i write something in personal message my conacts can't see what i wrote and when i put my status busy it shows that i'm avaliable, so please i want you to help me !!!!!!!!!!

Answered in your original thread.
http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/a-problem-with-the-BBM/m-p/139...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problems with the built in line in

In garageband I can record with the built in microphone, but when the built in input is chosen I get no signal. I have tried using audacity and the built in input works fine.
any ideas?

http://www.bulletsandbones.com/GB/GBFAQ.html#recordlinein

Re: Having some problems with the 8350i. Need Help Please!

Everyone I talk to hears echo's. I also don't get text messenges until sometimes a full day after they're sent. I wonder if our geographic area dictates why this is happening.. if you search the forum for "echo" there's quite a few people with the same problem. I'm in Florida.

How are you receiving the sms manually?
If your device is new, proceed to change the device.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

I have a problem with the iPad 2volume, any help?

I have an issue with the volume-really low- even in the high setting? This been going on for couple month...

Try to find the sound holes in ur iPad.its on the bottom left side when u flip ur iPad over. If it is covered take off whatever's covering it.

Having some problems with the 8350i. Need Help Please!

I just got the 8350i through Sprint/Nextel and already am having problems receiving text messages and when I finally do receive them (one day later or after turning set off then back on), I have to manually receive the message.
Also, I have customers complaining about an echo on their side of the phone every time they call me. Saw some others where having this problem as well.
Is there anything I can do to fix this? My phone is vital to my business and any help is greatly appreciated!!!
Thnaks!!

How are you receiving the sms manually?
If your device is new, proceed to change the device.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Error 213:11 problems with the license i need help

i have an adobe cc account and i installed some programs in my desktop, and when i intalled the same programs in my notebook appeared the error 213:11 pls help me sorry for my english bu i speak spanish

Hello,
Try these trouleshooting steps as mentioned in the document.
http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
Should certainly take care of the problem.
Good Luck !!

Having problems with the Built-in stereo speakers, how can i activate them?

Mi built-in stereo speakers are not working, and i cant increase or decrease the volume, the icon is in grey and i cant chance it

There have been more than a few cases of a tiny "switch" inside the audio jack having issues. Try gently inserting a 3.5mm audio plug into the jack part way and removing it. Next try a bit further. Continue this until you get it all the way in (without jamming it in) or sound starts working properly.
Also check to see if sound will play in ear/headphones via the jack.
People have also had success gently wiggly an audio plug in the jack or using something small to poke around inside the jack and reset the switch. Gently, carefully . . . don't want to damage anything.

I have problem with the Client Security. Help me please

I've a T61 and would like to use a finger print scan for my password. When I started the Client Security Solution, I've got this message "The TPM on this system has been configured previously for an operating system other than svista. To use TPM in windows vista, it must first be cleared for the BIOS setup." How could I do it? Please let me know. Thank you for your attention.
Solved!
Go to Solution.

i have the same problem after I downgraded my Vista to XP pro just now. What do you mean by ignoring the message? It won't let me in the CSS page...

Hi problem with the transaction XD02.please help..full marks given

Hi,
I am running a transaction XD02 and providing the following details.
Tcode: XD02
Customer: J101
Company Code: C800
Sale Org: CJRP
Dist Chan: 00
Divison: CH
<ENTER> and then
Click on pushbutton "Other Communication" - the popup does not include option INT Internet mail (SMTP).it has got other options like fax,pager services,printer,remote mail,telephone but no internet mail.
can anybody help me in adding this functionality.
full marks wud be given for the right person..

Hi, customer screens will come depending on our settings in SPRO. we can make them visible or invisible through our settings. Basically SD Consultants do that.
any way. As you are using XD02, find out the customer account group and follow the steps for that account group in SPRO. the seetings will reflect in XD01, 02 and 03 transactions.
But in your case may be you are doing the steps for different account group (sold-to, ship-to, bill-to..etc). You can find account group in KNA1 table.
Save the entries and then check. try using logon again.

Problem with the replaceAll method - please help

When the source String contains some special characters like ' ? ' , ' ) ' , or ' ( ' etc, the replaceAll function doesn't has any effect on the source String.
for example
String k="images/mainpage7(sm)_01.jpg";
String h=k.replaceAll("images/mainpage7(sm)_01.jpg","JoinNowBox_01.jpg");
System.out.println(k);
System.out.println(h);
output:
images/mainpage7(sm)_01.jpg
images/mainpage7(sm)_01.jpg
Can anybody tell me what to do?
Thanks in advance
Hristos Floros - Greece

But what if I don�t know the values of all Strings?
String a="images/mainpage7(sm)_01.jpg";
String b="images/mainpage7(sm)_01.jpg";
String c="images/mainpage7(sm)_01.jpg";
String d=a.replaceAll(b,c);
System.out.println(a);
System.out.println(d);

Problem with the built in mic. HELP!

Similar Messages

Maybe you are looking for