Problem with the Chinese simplified keyboard !

Since updating to iOS7 on my iPhone 4s when writing text using a QWERTY keyboard with Chinese Simplified Pinyin, characters no longer appear, only the letters which I've typed. Anyone else with this problem and found a solution? It troubled me since the day I updated. The only way to resolve this is to switch off then on again my phone. But it doesn't help because when I use this keyboard after few mins it turns to no character shown.

Have you tried a Reset?
http://www.apple.com/support/iphone/assistant/phone/#section_1

Similar Messages

Are there any other left eye dominant (or left handed) iPhone users that experience problems with the touch screen keyboard selecting the letter next to the one you'd intended..?

Are there any other left eye dominant (or left handed) iPhone users that experience problems with the touch screen keyboard selecting the letter next to the one you'd intended..?

It's either hand right or left.
I have the same issue myself. Not sure if it's b/c my fingers are too big or if I'm really missed the letter on the keyboard.

After updating my iPhone4 device from 4.3.3 to 5.0.1, I found I can't use the Chinese simplified keyboard and wifi as well.

After installing and restored my iphone4 32g from 4.3.3 to 5.0.1 recently, I found it can't acess Chinese simplified keyboard while messaging. When I select CS pinyin keyboard, it will jump back to the home screen. Connection to public wifi also problem while I put in the correct password it will keep on with searching icon but can't acess to the Internet. Pls help and I'd restored 3 times and the problems still remained.

djhmd
Re: iOS 4.3 Locked my factory unlocked iPhone 4!!
Apr 11, 2011 4:22 PM (in response to John Doe 69)
Hi i just have seen your problem I had the same situation with 4.2.1 but this is not your upgrade to ios 4.3 . few months ago i bought a factory unlocked iphone from apple store at full price. I bring it home and then i activated it with my fido sim card everything was perfect .
Then i send it to someone of my family in Morocco . When they received the phone they inserted a sim card and it said Invalid Sim card the iphone has been locked to Fido trough activation process went to appstore they did a check and they told me that infact it was unlocked and now it has been locked to fido ( Strange situation ) and then they told me to bring the phone and they will replace it but the phone was at 6000 Km so i had no choice i contacted fido to unlock it Because only fido and rogers can do this here in Canada so i paid 50 $ and send to them the proof of purchase and then they unlocked it trough itunes.
What they told me at appstore they have a batch of phones in this situations but now it seems that the problem is fixed.
Finaly for your information if you buy a brand new iphone from any career in canada you can activate it with any other carieer and it's gonna be locked to this career ( For example you can buy a brand new iphone from telus and for the first time you can use it with rogers and it will be locked to rogers ) Even if it s suposed to be a telus phone .
I found this post. Oh my GODDDDD! If this is true then Apple is **** **** and so is Canadian carrier.

Problem with the volume keys on my keyboard.

Hey everybody,
I have a problem with the volume keys on my keyboard. This started a couple days ago and I can't seem to figure out how to fix it. When I press the volume up or down buttons, the graphic appears on the screen as it normally would, but has no effect on the volume of the sound coming out of my speakers. Therefore, the only way to change the volume of music or whatever I am listening to is to use the volume control within the program/website itself (itunes, youtube, etc.) Even changing the volume on the volume icon at the menu bar on top of the screen does nothing. If anyone has an idea of how to go about solving this issue, I would greatly appreciate it. Thanks!

First look into the Preference > Sound > Outpur whether internal Speakers are choosen.
The only Preference to delete I can discover is com.apple.systempreferences.plist in your home Library folder. You can try to move it out to the desktop for example, not to loose all your settings. Restart and see whether the problem still persists. If you don't know how to do this here some Terminal (Applications > Utilities) commands. Enter them by copy and paste followed by <enter>
mv ~/Library/Preferences/com.apple.systempreferences.plist ~/Desktop/
restart
to get it back:
mv ~/Desktop/com.apple.systempreferences.plist ~/Library/Preferences/
confirm with "y" if you are asked to replace this file.
marek

The cursor on my iMac freezes, and I cannot do anything unless I unplug the computer. It is NOT a problem with the mouse or the keyboard ... it is internal. How do I fix this??

The cursor on my iMac (Panther 10.3.9) freezes to where I cannot do anything unless I unplug the computer. It is NOT a problem with the mouse or the keyboard. How do I solve this problem?

ClassicII wrote:
Sorry to say but your imac g5 logic board has bad caps. This was a problem apple had and issued a out of warentee fix but that has now expired.
The cost to get this repaired is more than what you could find another used imac for.
I would suggest you get some details before you rush to make a diagnosis. You have absolutely no information to base this on. I see you're hitting up on numerous threads all over the place. Quality, meaning several good posts with reliable advice, is much more worthwhile than quantity.

2 Problems with the Ipad Air...midi keyboard and usb microphone

IN SHORT:
2 Problems with the Ipad Air...what midi keyboard will connect to the lightning camera connector and what microphone as well? There seems to be issues with the ipad air not being able to power them. Has anyone got any devices to work yet?
IN DEPTH:
I have a yeti microphone that when I plug in it says its using too much power. A little samsung go mic I have plugs in find and works but isnt quite what im looking for. My midi keyboard is not reading...its probably 15yrs old (didnt expect it to work). I have ordered a usb powered keyboard but im now nervous it may not work if it requires too much power. Has anyone had any success with a particular model of keybaord? I saw a youtube video of the CME Xkey in which it was plugged into an ipad that uses the lightning jack, but was unsure if it was the air or a different model.
Any help is appreciated on this...I love my ipad air and hoping to make it my fully functional music recording device.
By the way I mostly use garageband

hey mate
Yes what I ended up doing is buying a powered usb hub. They are about 10 dollars or so on amazon.com. There are tons to choose from. I use a yeti micrphone now with no issues and a midi keyboard. You will need the lightning usb adapter too. You plug the lightning adapter into the ipad and the hub into the adapter then plug all your accessories into the powered hub. So it works well you just gotta buy an extra piece of equipment.

I have a problem with the keyboard on my MacBook. The letters are typing as symbols and the delete and return/enter buttons do not work. Does anybody know how to fix this?

I have a problem with the keyboard on my MacBook. The letters are typing as symbols and the delete and return/enter buttons do not work. Does anybody know how to fix this?

Hey skyshade13,
Thanks for the question. The following article outlines how to restore a previous iTunes library should there be no content after updating. While the article does not speak specifically to your symptoms, attempting the steps by utilizing the "Previous iTunes Libraries" folder may resolve your issue.
No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
For further information see the following information:
OS X Lion: iTunes opens to "created by a newer version" alert
http://support.apple.com/kb/TS3918
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/HT1451
Thanks,
Matt M.

Enormous problems with the wireless keyboard

I have really big issues with the bluetooth slim keyboard from Apple. It is not working proberly with my MacBook Pro.
2 of 3 times when I press the Caps Look key, my keyboard says goodbye. The capslook LED display on the "real" keyboard gets green and so does the green light on the wireless. But from this moment on the connection is lost. I have to restart the computer to use the wireless keyboard again
I'm using no other bluetooth device (not that I'm aware of), only my Wacom tablet (usb cable of course).
I don't use the Capslook key in my workflow, but sometimes I accidentally press the key. Very frustating.
Someone else has this problem????

Hi
GUI of these controller still not their best or reliable as well, so I always use CLI for the configuration. Make sure you use IOS-XE 3.6 to get whatever the GUI enhancement this product has.
If you looking for specific commands to configure a feature let us know, otherwise for general config below should helps you.
1. http://mrncciew.com/2013/09/29/getting-started-with-3850/
2. http://mrncciew.com/2013/12/04/wlan-config-in-3850-part-1/
3. http://mrncciew.com/2013/12/06/wlan-config-with-3850-part-2/
4. http://mrncciew.com/2013/12/14/3850ma-with-5760mc/
5. http://mrncciew.com/2014/08/05/client-details-in-converged-access/
HTH
Rasika
*** Pls rate all useful responses ****

Hello, I have a problem with the keyboard of the device, some of the keys do not respond. What can I do? Amit

Hello,
I have a problem with the keyboard of the device, some of the keys do not respond.
What can I do?
Amit

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings (if you can)
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

my new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare. They will help you.
Best.

Would there be a problem with the warranty in the UK if bought in USA? Plus is there a big difference between US and UK keyboards? Thanks

Hi, I'm from the UK and in the USA for a week. I'm thinking of purchasing an Air. Would there be a problem with the warranty in the UK if bought in the US? Plus is there a big difference between US and UK keyboards?
Cheers
G

There are subtle differences on a British layout, mainly having to do with the top line (shift numbers), to permit the use of European monetary symbols. There are a few other keys different (note the enter key).
Here are the basic layouts. Obviously the MBA won't have an eject key, as the power key resides in that location.
British English Keyboard
USA English Keyboard

Has anyone had a problem with the letters literally rubbing off the keyboard?

Has anyone had a problem with the letters actually disappearing from the keybord, like being gradually rubbed out? My macbook air had this problem one year after purchase. They fixed it for free. Now, a year later, I have the same prob. Apple doesnt want to know.
I would be delighted with any suggestions, reactions etc. thanks in advance.

I don't have to be doing anything or be anywhere near the computer.
The machine feels warm but i don't know if thats normal or not.
Imac, 20-inch,mid 2007
Processor 2 GB intel core 2 Duo
Memory 2 GB 667 MHz DDR2 SDRAM
Graphics ATI Radeon HD 2400 XT 128 MB
Software OS X 10.8.2 (12C54)
No third party extensions that Iknow of

Problem with the way fonts display in Internet Explorer

Howdy. I built a site about a week ago (first crack at this). It has quite a bit of content but seemed to be fine on Safari, Netscape and Firefox. I checked it out at work on a PC with Internet Explorer 6 and there were typography problems. I intentionally used simple web fonts (all Arial) to hopefully minimize this sort of thing. I used a 70% tint of Black for the font color on all the fonts. On Explorer the fonts display fine on pages 1, 2, 3, and 4. On page 5 the type appears blurry, really greyed and spread. I can't figure out why (same fonts and styles).
As an experiment I tried posting just a couple of pages with the type at 100% black. The really bad pages weren't so bad (but not nearly as good as on the other browsers.) The site is rballister.com. If you click on any of the links (picture boxes) on the "print & mail index" pages you will see the problem with the type. Thanks in advance for any help anyone can provide.

Because I thought it would be a nice effect, I decided to use the slider in the color pallette and change to color of the type from 100% black to 70% black (which is to to say a shade of gray). I'm referring to text that I keyboarded into iWeb. As previously mentioned, the gray type worked just fine on most browsers but caused problems in Internet Explorer (in a seemingly random way. Still can't figure out the reason). When I changed the type to black on a white background (black and white), the problem wasn't as bad as it was in Explorer, but still not nearly as good as in the other browsers.

"There is a problem with the SIM card in your iPhone"

I'm getting this error when I try to activate my new iPhone 4 through iTunes:
"*There is a problem with the SIM card in your iPhone.*
To activate your iPhone with this account, you will need a new, unactivated SIM card. Please use the SIM card that was provided with your new iPhone. If you are using the new SIM card, and are unable to complete activation, you can go to an Apple Retail Store or an AT&T company owned retail store to request an unactivated SIM. If you would prefer to have a replacement SIM card sent to you via overnight mail, please call us at 1-800-MY-APPLE. We apologize for the inconvenience this has caused."
Now I've already been to AT&T and nothing they could do with the account settings would work, in fact they had never seen the issue before. They gave me a new SIM card and that did nothing as well. Finally they tried out a different SIM tray, and that still didn't work. I have a Genius Bar appointment at the Apple Store tomorrow, but I was wondering if anyone else has this problem. Do you think that the SIM reader inside the iPhone 4 is broken?

I solved a problem I had with activating my iPhone although the error message was different from yours.
I got the message "There is something wrong with your iPhone and it cannot be activated, please bring it to your nearest Apple service".
Via a Chinese forum I found out its the SIM card witch is the problem. If the serial number of the SIM has a "letter" in it it won't work. If only numbers it will work.
I now tried it with 2 SIM cards with letters and got the message over and over again. Than tried with my only numbers SIM card and it activated instantly.

Problem with the cache hit ratio

Hello,
I ma having a problem with the cache hit ratio I am geting. I am sure, 100% sure, that something has got to be wrong with the cache hit ratio I am fetching!
1) I will post the code that I am using to retrieve the cache hit ratio. I've seen about a thousand different equations, all equivalent in the end.
In oracle cache hit ratio seems to be:
cache hits / cache lookups,
where cache hits <=> logica IO - physical reads
cache lookups <=> logical IO
Now some people use the session logical Reads stat, from teh view v$sysstat; others use db block gets + db consistent gets; whatever. At the end of the day its all the same, and this is what i Use:
SELECT (P1.value + P2.value - P3.value) AS CACHE_HITS, (P1.value + P2.value) AS CACHE_LOOKUPS, P4.value AS MAX_BUFFS_SIZEB
FROM v$sysstat P1, v$sysstat P2, v$sysstat P3, V$PARAMETER P4
WHERE
P1.name = 'db block gets' AND
P2.name = 'consistent gets' AND
P3.name = 'physical reads' AND
P4.name = 'sga_max_size'
2) The problem:
The cache hit ratio I am retrieving cannot be correct. In this case i was benchamarking a HUGELY inneficient query, consisting of the Union of 5 Projections over the same source table, and Oracle is configured with a relatively small SGA of 300 MB. They query plan is awful, the database will read the source database table 5 times.
And I can see in the physical data statistics of the source tablespace, that total Bytes read is aproximatly 5 times the size of the text file that I used to bulk load data into the databse.
Some of the relevant stats, wait events:
db file scattered read     1129,93 seconds
Elapsed time: 1311,9 seconds
CPU time: 179,84
SGA max Size: 314572800 Bytes
And total bytes read: 77771964416 B (aproximatly 72 Gga bytes)
the source txt loaded to the database was aprox 16 G
Number of reads was like 4.5 times the source datafile.
I would say this, given the difference between CPU time and Elapsed Time, it is clear that the query spent almost all of its time doin DB file scattered reads. How is it possible that i get the following cache hit ratio:
Cache hit Ratio: 0,92
Cache hits: 109680186
Cache lookups: 119173819
I mean only 8% of that Logical I/O corresponded to physical I/O? It is just not possible.
3) Procedure of taking stats:
Now to retrieve these stats I snapshot the system 2 times. One before the query, one after the query.
But: this is not done in a single session. In total 3 sessions are created. One session two retrieve the stats before the query, one session to run the query, a last session to snapshot after the query.
Could the problem, assuming there is one, be related to this:
"The V$SESSTAT view contains statistics on a per-session basis and is only valid for the session currently connected. When a session disconnects all statistics for the session are updated in V$SYSSTAT. The values for the statistics are cleared until the next session uses them."
What does this paragraph mean. Does it mean that the v$sysstat only shows you the stats of the last session that closed? Or does it mean thtat v$sysstat is increamented with the statistics of each v$sessionstat once a session terminates? If so, then my procedure for gathering those stats should be correct.
Can anyone help me sort out the origin of such a high cache hit ratio, with so much I/O being done?

sono99 wrote:
Hi,s
first of, let me start by saying that there were many things in your post that you mentioned that I could no understand. 1. Because i am not an Oracle Expert, i use whatever RDBMS whenever i need to. 2. Because another problem has come up and, right now, i cannot inform myself to be able to comprehend it all.Well, could it be that you need to understand the database you are working on in order to comprehend it? That is why we strongly advise you to read the concepts manual first, you need to understand the architecture that Oracle uses, as well as the basic concepts of how oracle does locking and maintains read consistency. It does these different than other database engines, and some things become nonsense if looked at from the viewpoint of a single user.
>
quote:
It would be useful to see the execution plan jhust in case you have simplified the problem so much that a critical detail is missing.
First, the query code:
2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:>SQL> CREATE TABLE FAVFRIEND
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 2 NOLOGGING TABLESPACE TARGET
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 3 AS
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 4 SELECT ID as USRID, FAVF1 as FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 5 UNION ALL
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 6 SELECT ID as USRID, FAVF2 AS FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 7 UNION ALL
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 8 SELECT ID as USRID, FAVF3 AS FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 9 UNION ALL
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 10 SELECT ID as USRID, FAVF4 AS FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 11 UNION ALL
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 12 SELECT ID as USRID, FAVF5 AS FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 13 ;
Now, Althought it is clear from the query that the statement is executed with the NOLOGGiNG, i have disabled the logging entirely for the tablespace.There are certain rules about nologging that may not be obvious. Again, this derives from the basic Oracle architecture, and if you use the wrong definitions of things like logging, you will be led down the primrose path to confusion.
>
Futhermore, yes, the RDBMS is a test RDBMS... I have droped the database a few times... And I am constantly deleting an re-inserting data into the source database table named PROFILE.>
I also make sure do check all the datafile statistics, and for this query the amount of RedoLog, Undo "Log", Templife used is negligible, practically zero.Create table is DDL, which has implied commits before and afterwards. There is a lot going on, some of it dependent on the volume of data returned. The Oracle database writer writes things out when it feels like it, there are situations where it might just leave it in memory for a while. With nologging, Oracle may not care that you can't perform recovery if it is interrupted. So you might want to look into statspack or EM to tell you what is going on, the datafile statistics may not be all that informative for this case.
>
Most of the I/O is reading, a few of the I/O is writing.
My idea is not to optimize this query, it is to understand how it performs. Well, have you read the Concepts manual?
I have other implementations to test, namely I having trouble with one of them.
Furthermore, I doubt the query Plan Oracle is using actually involves tablescans (as I I'd like it to do); because in the Wait Events, most of the wait time for this query is spent doing "db file scattered read". And I think this is different from a tablescan.Please look up the definition of [db file scattered read|http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/instance_tune.htm#sthref703].
>
Do you really have to use sessions external to the query session ? Can you query v$mystat joined to v$statname from the session itself.
No, I don't want to that!
I avoid as much as possible having the code I execute being implemented in java. Why do you think java has anything to do with this? In your session, desc v$mystat and v$statname, these are views you can look at.
When i can avoid it I don't query the database directly through JDBC, i use the RDBMS command line client, which is supposed to be very robust. Er, is that sqlplus?
So yes, I only connect to the database with JDBC... in very last session.
Of course, I Could Have put both the gather stats before query and gathers stats after query a single script: the script that would be also runing the query.
But that would cause me a number of problems, namely some of the SQL i build has to be implemented dynamically. And I don't want to be replicating the snapshoting code into every query script I make. This way I have one sql with the snapshoting scripts; and multiple scripts for running each query. I avoid code replication in this manner.Instrumentation is a large subject; dynamic sql generation is something to be avoided if possible. Remember, Oracle is written with the idea that many people are going to be sharing code and the database, so it is optimized in that way. For SQL parsing in particular, if every SQL is different, you get a performance problem called "hard parsing." You can (and generally should, and sometimes can't avoid) use bind variables so that Oracle doesn't need to hard parse every SQL. In fact, this is one of those things that applies to other engines besides Oracle. I would recommend you read Tom Kyte's books, he explains what is going on in detail, including in some places the non-Oracle viewpoint.
>
Furthermore, Since the database is not a production database, it is there so I can do my tests. I don't have to be concerned with what other sessions may be doing to my system. There are only the sessions I control.No, there are sessions Oracle controls. If you are on unix, you can easily see this, but there are ways to see it on Windows, too. In some cases, your own sessions can affect themselves.
>
then what it the array fetch size ? If the array fetch size is large enough the number of block visits would be similar to the number of physical block reads.
I don't know what the arraysize you mention is. i have not touched that parameter. So whatever it is, it's the default.You should find out! You can go to http://tahiti.oracle.com and type array fetch size into the search box. You can also go to http://asktom.oracle.com and do the same thing, with some more interesting detail.
>
By the way, I don't get the query results into my client, the query results are dumped into a target output table.
So, if the arraysize has something to do with the number of rows that Oracle is returning the client in each step... I think it doesn't matter.You may hear this phrase a lot:
"It depends."
>
As for the query plan, If i am not mistaken you can't get get query plans for queries that are: create table as select.What?
JG@TTST> explain plan for create table jjj as select * from product_master;
Explained.
JG@TTST> select count(*) from plan_table;
COUNT(*)
         3
I can however commit the create table part and just call for the evalution of the Select part of the query; i believe it should be same.
"Optimizer"     "Cost"     "Cardinality"     "Bytes"     "Partition Start"     "Partition Stop"     "Partition Id"     "ACCESS PREDICATES"     "FILTER PREDICATES"
"SELECT STATEMENT"     "ALL_ROWS"     "2563"     "586110"     "15238860"     ""     ""     ""     ""     ""
"UNION-ALL"     ""     ""     ""     ""     ""     ""     ""     ""     ""
"TABLE ACCESS(FULL) SONO99.PROFILE"     ""     "512"     "117222"     "3047772"     ""     ""     ""     ""     ""
"TABLE ACCESS(FULL) SONO99.PROFILE"     ""     "513"     "117222"     "3047772"     ""     ""     ""     ""     ""
"TABLE ACCESS(FULL) SONO99.PROFILE"     ""     "513"     "117222"     "3047772"     ""     ""     ""     ""     ""
"TABLE ACCESS(FULL) SONO99.PROFILE"     ""     "513"     "117222"     "3047772"     ""     ""     ""     ""     ""
"TABLE ACCESS(FULL) SONO99.PROFILE"     ""     "513"     "117222"     "3047772"     ""     ""     ""     ""     ""
This query plan was taken from sql developer, exported to txt, and the PROFILE table here has only 100k tuples.
Right now I am more concerned with testing the MODEL query. Which Oracle doesn't seem to be able any more... but that is a matter for another thread.
Regarding this plan. The Union ALL seems to be more than just a binary Operator... IT seems to be Neray.
The union all on that execution plan seems to be taking as leaf tables 5 99sono.Profile tables, and be making a table scan to them all. So I'd say that the RDBMS should only scan each database block once and not 5 times.
But: It doesn't seem to be so. IT seems like what oracle is doing is scanning completly each the table, and then moving on to next select statement in the UNION ALL. Because given the amount of source table that was read, 5 times greater than the size of the source table. Oracle didn't reuse read blocks.
But this is just my feeling.Your feeling is uninteresting. Telling us what you really hope to accomplish might be more interesting.
Anyway, in terms of consistent gets, how many consistent gets should the RDBMS be doing? 5
One for each table block?It depends.
>
My best regards,
Nuno (99sono xp).

Problem with the Chinese simplified keyboard !

Similar Messages

Maybe you are looking for