Problem with the creation of a new user

Hi!
II want to create new user in the database but i have this message: this entry already exists in the following tables (CUMI).
This user doesn't exists and we haven't deleted users.
When I am going to see in the table OUSR I have 19 users
But when I am going to see the table CUMI, it recognises an user code 20!
when I use the orange arrow near the user code 20, nothing happens.
SAP 2005 A PL 46
How can i do?
Thank you
Séverine

Hai!
Raise a message in sap support portal.
Regards,
Thanga Raj.K

Similar Messages

  • Problems with the creation of a new domain using JCAPS6

    Hello again,
    I created a new domain, in addition to default domain1, with JCaps 6, following the steps in this link:
    http://blogs.sun.com/polyblog/entry/creating_a_new_caps_6
    I arrived to the step 4 of the procedure "install runtime installation" and I adapted install.xml file also (not only the install.properties), with the correct values concerning domainName and port.
    When I run the ant-command then, I always get the following error:
    C:\JavaCAPS6\appserver\bin>asant -f C:\JavaCAPS6\appserver\addons\caps\install.xml
    Buildfile: C:\JavaCAPS6\appserver\addons\caps\install.xml
    install:
    install:
    [sun-appserv-admin] Executing: list-lifecycle-modules port 19048 host localhost passwordfile "C:\JavaCAPS6\appserver\addons\caps\install.properties"  user admin server
    BUILD FAILED
    C:\JavaCAPS6\appserver\addons\caps\install.xml:86: The following error occurred while executing this line:
    C:\JavaCAPS6\appserver\addons\caps\applicationVerifier\server-init.xml:41: An exception occurred while running the command. The exception message is: CLI137 Command list-lifecycle-modules failed..
    Total time: 1 seconds
    How can i do to solve this problem?
    Thanx
    Edited by: fabrigas84 on Sep 3, 2009 8:36 AM

    Hai!
    Raise a message in sap support portal.
    Regards,
    Thanga Raj.K

  • I have a problem with the WiFi on my new 4th gen 32g Itouch.

    I have a problem with the WiFi on my new 4th gen 32g Itouch. It is showing the bars and the wifi connection is showing that it is on but I can't get onto any of my apps that use the internet. Any suggestions as to what might be the problem? Thanks!

    - Do other devices successfully connct to the same network?
    - Does the iPod successfully connect to other networks?
    Try :
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Powering off and then back on your router.
    - Resetting network settings: Setings>General>Reset>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • Problem with the AF of my new 18-135mm EFS IS STM lens

    Hello,
    The lens came with the EOS Rebel T5i bundle.
    The auto focus is working incorrectly, focusing closer than the detected area. This is happening when I use the viewfinder. When a picture is taken using the “direct view” (LCD display) it focus correctly.
     I didn’t use the camera a lot since I bought it, now looking the first pictures I see that this problem is happening since I bought it.
    I changed the zoom lens with another Canon camera and then my new Rebel T5i works fine and the same problem happens with the other camera, therefore I’m sure that the problem is in the lens and not in the camera body.
    The out of focus is more noticeable when I'm taking pictures in 18mm position to an object farther than 2 meters but it is happening in any zoom position. It is clear when I compare the same picture taken with the viewfinder with one taken with the LCD Display.
    I updated the body firmware and the problem continues.
    Is it possible to update the lens firmaware? I couldn’t find them in the canon webpage.
    I will go into an important trip next week, therefore I will not have time to send the camera to repair.
    Any idea?
    Thanks!

    You may want to rent a lens for your trip and get this lens to service.
    You'll want to be sure it really is a problem with the lens (it sounds like it is from your description).  Test the lens against a "flat" target (such as a wall).  You can hang something on the wall with high-contrast (newspaper works great) and put the camera on a tripod.  The idea is that (a) the camera is definitely not moving, (b) the focus target is definitely not moving, and (c) the target is flat and there are no distracting objects in the field of view so it's not possible for the focus system to decide to lock focus on anything OTHER than your intended target.
    Next... deliberately turn the focus ring to put the camera out of focus (so that the camera HAS to move the focus).  This is mildly tricky with an STM lens since there's no mechanical link from the focus ring to the lens -- it's electronic.  The lens only accepts focus input when focus is active (e.g. half-press the shutter button, etc. to wake it up.)  I run focus all the way in and test several times, then run focus all the way out and test several times (that way it has to move focus in both directions.)
    If the lens is consistently focusing closer, then it will need service.  
    Tim Campbell
    5D II, 5D III, 60Da

  • Problem with the creation of the _pageflow folder in the portal project

    Hi,
    I have developed one portal project on the BEA Weblogic Portal server version 9.2. And I am having a quite a number of pageflow portlets in my application.I am facing a weird problem with the workshop(BEA Workshop for Weblogic Platform 9.2.1). It is not generating the folder _pageflow required for all the protlets when we build it.I tried cleaning and building it number of times but it is of no use.
    Is it a bug in the weblogic server version or do I really miss something in the workshop settings?
    Please help.
    Thanks & Regards
    Prakash.

    Hi Dmitry,
    What state are the tasks in?  Are they in Active, Running, or Completed?  There will only be output files if the tasks are in state running or completed.
    Additionally, what is the status of the pool which the tasks ran on?  If the pool VMs have been deallocated (or the pool itself has been deleted) then the task files will be lost.  This is because the files of the tasks reside on the VM which ran
    the task.
    Lastly, you can check the file retention time of the tasks in the BatchExplorer UI by selecting the task and looking in the "Task Details" tab for "TaskConstriants.RetentionTime" to see what that is set to - if the retention time has
    passed (i.e. retention time was 1h but the task was run 2h ago), then the files will be cleaned up.
    It sounds like you already are using BatchExplorer, but we recently published a blog post which has some specific instructions for using BatchExplorer to debug (how to RDP into a VM for example), which you can find
    here - it also has some code snippets for how BatchExplorer performs the operations that it does.
    Let us know what you find from your investigation and we can help you figure out why your tasks don't have output files.

  • Problem with the creation of asset master record

    Hi Gurus,
    i am having problem in creation of a new asset master with the use of existing man asset number and different asset sub number. I am trying to create the asset in the same company code but different depriciation area, but the system is not allowing me to do that. Is there a setting in the SPRO by which I can allow the use of creation of the asset number by using the already existing asset number with the new asset sub number. This is actually happening in the system for one type of equipments but not for other.
    Can any one tell me what settings are to be made to allow this for all containers.
    Thanks in advance
    Anoop Sharma

    Hi,
    A sub asset master can be created with AS11 only.
    You cannot create a asset sub number under a main asset number, in the case, where different set of dep areas needs to be maintained.
    When you create a sub asset, all the dep areas will be copied to sub asset's master from main asset master. Since this set of dep areas cannot be different from main asset to sub asset.
    Hopw you understood this.
    Thanks,
    Srinu.

  • Problems with the setup of my new AE

    Hi to all. I have an Airport Express since a long time, that works properly. I got a new one, to extend my signal to other area of my house. The first time I connected the new AE (802.11n)to configure it, the Airport Utility recognized the devise but I got an error message that prompt me to repeat the previous steps. After this, the new devise can't be recognized to be configured. I have restarted the AE without luck. What I am doing wrong?

    Hi - am having same problem. The Airport Utility sees the base station, but clicking Manual Setup or Continue sends it into a long search (for the config file I believe) and it then puts up error message "An error occured while reading the configuration file..."
    All I can do is RESCAN.
    Thought I had it sorted... Restarted both AX and iMac (G5) and got through the whole manual setup. Now it is saying "Your AX doesn't have a valid IP address... Make sure..."
    I must say Apple isn't making it easy with this.

  • Index problem during the creation of a new partition

    We have a range partitioned table, with a local spatial index on each partition. While trying to use the alter table command to add a new partition we get the following errors.
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-13249: internal error in Spatial index: [mdidxrbd]
    ORA-13249: Error in Spatial index: index build failed
    ORA-13249: Error in R-tree: [mdrcritbl]
    ORA-13231: failed to create index table [MDRT_D789CC$] during R-tree
    creation
    ORA-29400: data cartridge error
    ORA-01031: insufficient privileges
    ORA-06512: at "MDSYS.SDO_INDEX_METHOD_9I", line 7
    ORA-06512: at line 1
    ORA-06512: at "LPDAACECS_PART.UPDATE_METADATA", line 1937
    ORA-06512: at "LPDAACECS_PART.UPDATE_METADATA", line 3625
    ORA-06512: at line 1

    I just wanted to expand on this for the sake of others who may need a bit more detail, having just resolved my similar problem.
    In Oracle Enterprise Manager, in the left-hand tree view, expand Security then Users inside the relevant Databases entry.
    Then select the name of the user/schema which needs to be able to perform the required task (in my case, create a spatial index from within a stored procedure).
    On the System tab in the right-hand pane, highlight
    Create Any Table
    Create Any Sequence
    Create Any Index
    (depending on the task that needs to be performed)
    Click the arrow to move these items into the "Granted" area. Click apply and your prayers have been answered. Mine were, anyway!
    Regards
    Stuart

  • Problem with the creation of the date server with the technology Mysql

    Hi,
    I have installed date integrator 11.1.1.5.
    I have installed oracle database 11.2
    I have installed mysql 5.1.41 with xamp
    I have created the repository master and work.
    I have created data server for oracle .
    ok all correct
    I have created the date server for mysql but I cannot insert the data for jdbc (why ? where insert data ?) when except it creates me the date server.
    but when I try to add a physical schema me from this error and I don't see the list of the schema.
    java.lang.NoClassDefFoundError: bsh/EvalError
         at com.sunopsis.jdbc.driver.JavaDriver.connect(JavaDriver.java:80)
         at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriver(DriverManagerDataSource.java:409)
         at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriver(DriverManagerDataSource.java:385)
         at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriver(DriverManagerDataSource.java:352)
         at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnection(DriverManagerDataSource.java:331)
         at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter$ConnectionProcessor.run(LoginTimeoutDatasourceAdapter.java:217)
         at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
         at java.util.concurrent.FutureTask.run(FutureTask.java:138)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
         at java.lang.Thread.run(Thread.java:662)
    how can I resolve my problem?
    thank you for help and cooperation.
    gabriele

    Hi,
    A sub asset master can be created with AS11 only.
    You cannot create a asset sub number under a main asset number, in the case, where different set of dep areas needs to be maintained.
    When you create a sub asset, all the dep areas will be copied to sub asset's master from main asset master. Since this set of dep areas cannot be different from main asset to sub asset.
    Hopw you understood this.
    Thanks,
    Srinu.

  • Problem in the creation of a new toolbar

    I had offered you this problem earlier when the beta version of the browser experience, the problem is that the browser does not save the toolbar do I created after the close of the browser, where when you re-open the browser the toolbar that you created is not established.
    This version of the browser fourth final, is still the problem persists, so that when you do upgrade to a browser from version 3.6 to version 4.0 did not keep me Toolbar, which it opened.
    Note that the version which is used by the Arabic version.
    Excuse my language weakness.

    Hai!
    Raise a message in sap support portal.
    Regards,
    Thanga Raj.K

  • Problems with the setup of my new Z10

    Hello.
    Can anyone help me? I just got my new Z10 and I cannot get past the agreement menu, it keeps sending me back to the 'wi-fi connections' menu. I am connected to my mobile network, I have tried connecting to my home network, but the same thing happens (it forwards to the agreement menu, waits a while and then goes back to the wi-fi menu). I cannot turn off my wi-fi connections.
    Please help.
    Nici

    Well, I'm glad to hear it has worked out now!  
    I only asked about the previous device as I wanted to make sure you were previously subscribed to BlackBerry data services.
    Thanks!
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Troubles with the creation of New Custom Adapter for NW 7.1

    Hi guys !!!
    I have some troubles with the creation of a new custom adapter for NW 7.1. I have followed some pdf and notes, like :
    [Upgrade an SAP NetWeaver PI 7.0 Adapter to SAP NetWeaver PI 7.1|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0667f56-96c7-2b10-0e9a-c40fbd523f4d]
    note : 1004000
    I have all the materials to make the custom Adapter ( like file .sca with all .rar and .sda , like file sample_ra.rar with all the file .java, like all the libs for the projects ) and I have make it !!! But, when I try do deploy it, i recieve a warning that i don't understand, this is the warning :
    S U M M A R Y
    ~~~~~~~~~~~~~~~~~~~
    Successfully deployed:           0
    Deployed with warnings:           1
    Failed deployments:                0
    ~~~~~~~~~~~~~~~~~~~
    1. File:C:Users
    maienzaDesktopCreazione del SDAPI71_AF_myFirstCustomAdapter_ver_2.0.sda
         Name:PI71_AF_myFirstCustomAdapter_ver_2.0
         Vendor:sap.com
         Location:SAP AG
         Version:7.1007.20090310105326.0000
         Deploy status:Warning
         Version:NEW
         Description:
              1. Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
    No one of the [EJBContainer] containers, which processed it, returned deployed component names.
    The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
    Possible reasons :
         1.An AS Java service, which is providing a container, is stopped or not deployed.
         2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
         at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
         at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
         at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:80)
         at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:56)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:741)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:732)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:576)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:270)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:192)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:875)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Result
    Status:Warning
    I have see in the nwa if there are some applications or services that are stopped but all the necessary it's started, just one question : in the pdf for upgrade from 7.0 to 7.1 no one speaks about ejBean or about a creation of it ... it's necessary an ejBean ?? Beacause in the file .sda of the file .sca that i have downloaded there are more of the adapter with ejBean ....
    Antonello

    Hi,
    the adapter metadata it's been created but my service is still stopped; when I try to start it, in the NDWS -> Deploy view -> tab Repositary view, I receive this errors, one after the other, cause I try to start it 3 times and in each time I received 3 differents errors :
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
         at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
         at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
         ... 30 more
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
         at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
         at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
         ... 30 more
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
    No one of the [EJBContainer] containers, which processed it, returned deployed component names.
    The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
    Possible reasons :
         1.An AS Java service, which is providing a container, is stopped or not deployed.
         2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
         at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)

  • Error: Creation of a new user in CUP

    Dear all,
    During the creation of a new user in CUP, is generated the following error message:
    Error in the provisioning request. The error occurred in the system(s). Details of error: USER CREATE-Length password is not enough (minimum length: 8 characters).
    Thanks all for any suggestions!
    Liliana!

    Hi,
    Thanks for your answers!
    My version is SAP GRC AC 5.3 and Support Package: 16.
    This is the complete error when I try to create a new user in CUP:
    iniu2011-07-04 07:59:19,520 [SAPEngine_Application_Thread[impl:3]_8] ERROR com.virsa.ae.service.ServiceException: Longitud clave acceso insuficiente (     )
    com.virsa.ae.service.ServiceException: Longitud clave acceso insuficiente (longitud mínima: 8 caracteres)
         at com.virsa.ae.service.sap.SAPProvisionDAO.createUser(SAPProvisionDAO.java:324)
         at com.virsa.ae.service.sap.ProvisionSAPUserDAO.createUserInNonCUA(ProvisionSAPUserDAO.java:1784)
         at com.virsa.ae.service.sap.ProvisionSAPUserDAO.createUser(ProvisionSAPUserDAO.java:352)
         at com.virsa.ae.service.sap.ProvisionSAPUserDAO.provisionUser(ProvisionSAPUserDAO.java:120)
         at com.virsa.ae.accessrequests.bo.ProvisioningBO.autoProvision(ProvisioningBO.java:219)
         at com.virsa.ae.accessrequests.bo.RequestBO.autoProvisioningForApprove(RequestBO.java:6164)
         at com.virsa.ae.accessrequests.bo.RequestBO.callAEExitService(RequestBO.java:7263)
         at com.virsa.ae.accessrequests.bo.RequestBO.callExitService(RequestBO.java:7037)
         at com.virsa.ae.accessrequests.bo.RequestBO.approveRequest(RequestBO.java:6889)
         at com.virsa.ae.accessrequests.bo.RequestBO.approveRequest(RequestBO.java:6682)
         at com.virsa.ae.accessrequests.actions.RequestViewAction.confirmRequestApproval(RequestViewAction.java:1022)
         at com.virsa.ae.accessrequests.actions.RequestViewAction.execute(RequestViewAction.java:106)
         at com.virsa.ae.commons.utils.framework.NavigationEngine.execute(NavigationEngine.java:295)
         at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:431)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
         at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:461)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
         at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:461)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:219)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Thanks all for any suggestions!
    Liliana!

  • Gmail on iphone was working fine until yesterday when it prompted me with the message cannot get mail user name or password for gmail is incorrect, i have tried deleting the account and re-created a new account, same problem, can anyone help?

    gmail on iphone was working fine until yesterday when it prompted me with the message "cannot get mail user name or password for gmail is incorrect", i have tried deleting the account and re-created a new account, same problem, can anyone help?

    paulcb, you're a genius, it worked, thank you so much, you don't know how much stress you have taken off my shoulders, I am constantly on my email in my iphone everyday.  Thanks a million, take care. Robert.

  • The timesheet creation failed, because of problems with the project I server or with data validation

    Hi,
    One of my user is facing issue in creating new time sheet,
    "The time sheet creation failed, because of problems with the project server or with data validations".
    This issue is coming to only few members out of 10000 members.
    Note: For the same user, can able to do in other machines. only the problem in his machine. Have ran the office diagnostics, but still the problem persists.
    Is any add-on's/any settings need to update in IE. Could any one please help me on how to fix this issue?
    Many thanks in advance.

    I would check the compatibility settings in IE etc, or try another browser (chrome, safari etc.)
    Ben Howard [MVP] | web |
    blog | book

Maybe you are looking for

  • Long Running BTC process in SAP R3 PROD system

    Hello All, In our PRD. env ..one BTC job running since long time with out collecting any data . when looked into job log and its associated BTC work process its status is active and the action performed is Sequential read to the table RESB .And this

  • Quicktime won't uninstall or install ?!

    Okay so I've trawled the internet looking for a solution and I have ended up here, here it goes. My iTunes would not open and a window appeared every time I tried saying 'iTunes has stopped working windows has closed the programme to prevent damage t

  • Forms9i and BLOB

    Hi, In Forms 6i, we had a form with OLE Container on it. We had a scenario where we allowed the user to attach a file that they had on hard disk to a record and save the record. We saved the information as a BLOB. The next time around, when they quer

  • Why do I keep getting logged out from iMessage?

    Every time I goto send a message I have to login. If I'm logged out am I missing messages? Is this why me friends and family are getting "Not Delivered" errors when messaging me?

  • IDLE URL on CCM 5.0

    Hi all Do you know how to get my .xml file into CCM 5.0 to get it dispayed as IDLE URL? It was working back in 4.1(3). How can acomplish this? Thanks in advance for any help