Problem with the ECC6 Data sources after migration

Dear All.
I transfer all the data source which is required for sales overview cube 0SD_C03.
lets take two senairos.
for example take 2LIS_11_VAHDR to BI 7 and then i migrate this data source with Export option after that i activate the data source and then i initialize the delta request with data.
the request successfully generated in BI to R/3 but in monitor it shows in yellow for long period of time and no data arrive i wait for 30 min but nothing happen.
in second one i initialize the delta process for data source 2LIS_12_VCHDR this data source i did't migrate but face the same situation.
can you please explain what will be the cause of this and how i can manage to fetch the data from ECC6 client through Business content data source.
i did not migrate the update rules into transformations.
any help will be highly appreciated.
kind regards,
Zeeshan

yes that is what exactly happen i did not do any thing as in the previous update rules there are written complex abap routine.
please let me know how to generate the update rules as was there previously or if i have to revert the datasource back to the previous position what i have to do.
i have figure out that why the data is not coming from SAP just need steps that how to revert the data source or make the new transformations with generated update rules or transformation.
any help will be highly appreciated.
Kind Regards,
Zeeshan
Edited by: Zeeshan haider on Jun 2, 2009 6:02 PM

Similar Messages

Problem with the SQL Data Source (Essbase server in Unix Env)

I too have the same problem.
I have setup the Datasource for an Oracle db in the Essbase Server (which is on a Unix Box) using the Oracle Wire Protocol.I tested the ODBC connection in the Server and it connect with the credentials.
But if i choose the same DSN in the EAS and try to connect i get the below error
Error: 1021001 Failed to Establish Connection With SQL Database Server.
I even downloaded a document from the Oracle site.. on the SQL interface in Essbase but i could not find the inst-sql.sh file to enable Essbase SQL Interface on the server. Is this required??
I tried with both the User & System DSN on the server but no luck.
Any help on this will be highly appreciated. Thanks in advance.
Posting in a new thread since the old one is answered and no points available to score.

It can depend on the version, it is different for version 11, further information :- How to define a relational data source in (odbc.ini) V11 Essbase?
Cheers
John
http://john-goodwin.blogspot.com/

I have a problem with the apple service team after making a payment. Where do I take the issue up?, I have a problem with the apple service team after making a payment. Where do I take the issue up?

I have a problem with the apple service team after making a payment. Where do I take the issue up?, I have a problem with the apple service team after making a payment. Where do I take the issue up?

If you are dissatisfied with the Service you have received and wish to Contact Apple...
India
Start your support request online and we'll connect you to an expert.
(91) 1800 4250 744
www.apple.com/in/support/
From the above Link...
To Contact Apple World Wide for Support and Service
http://support.apple.com/kb/HE57

HT201365 ahs anyone had a problem with the passcode to iphone after ios7?

Has anyone had a problem with the passcode to iphone after ios7?

This link may help with your passcode issues:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212?viewlocale=en_US

Are you having problems with the Lacie external drive after upgrading to the new operating system

Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?

See here for everyone discussing the issue you are having:
https://discussions.apple.com/thread/5475136?tstart=0

How can I debug a problem with the 3g data connection on my iPhone 4s?

This question didn't get any answers in the "Using iPhone" forum. Thought I would re-ask here. Note, I had to reset the network again today 2 days after the last reset:
I've been having intermittent problems with my 3g data connection on my iPhone 4s on ATT. Whenever this happens I see full bars etc, but can't browse from safari or get any data in other apps. My wife's iPhone 4 right next to me has no issues at all. Switching on/off airplane mode and turning off/on Cellular Data does not help. The only thing that helps is resetting the Network Settings or hard restarting the phone.
I figured my problems were hardware related so I took my phone in for a replacement the other day. Things started out fine but after I upgraded it to 5.01 and restored my backup and now I am back to having the same issue today. I assume the issue is with something coming from my backup / restore but is there any way for me to pinpoint what could be causing the issue. I have a lot of apps, I'd rather not have to reinstall and set them all backup manually, but I would if I knew that would fix the problem... but for all I know one of the apps could be causing it.
Anyone have any logs I can check or testing I can do on my end?
Thanks!

Unfortunately, Apple does not make any logs available to the average schmoe (like us) for networking, kernel dumps, or anything else (assuming, of course, it is not jailbroken).
Your best bet is to take it back into the store. Ask them to look at the notes in GCRM regarding the last time this occured, then explain after upgrading to 5.01 it is occuring again. Then ask them for a phone swap since it is a reoccuring issue and doesn't sound like an OS/SW issue. Good luck!

Problem with the "now playing"-function after timer sleep-mode

At first: sorry for my english.
I have the following problem with the Nano 6G: I set the timer of my iPod Nano to shut it down after a while of playing. When I turn it back on afterwards, the now-playing-button does not show the song that it played at last. Instead of that the nano is automatically set to shuffle mode which was not activated before and the now-playing-button will show any other song randomly.
This does not happen when I switch it to sleep-mode with the button on the top, only when the sleepmode ist activated by the timer.
Does anyone notice the same issue with his nano? How can I bring my nano to play the same song after the sleepmode, that it played before?

Hey Ipaqman, that strange behavior of the Nano 6G annoys me for exactly the same reason: audiobook in bed + sleeptimer = losing the place. As You say, the 5G works better with that and I also hope that Apple takes notice of that issue and will solve it.
Until that I got myself a "workaround". I create a new playlist on the device, with just the single audiobook in it, that is actually in use. This helps me finding back into it, as long as "now playing" will not work correctly with the sleeptimer.

Maintaining the structure of a SQL Server staging area and dwh aligned with the Oracle data source

Hi,
I'm working in a context where the data source system, in Oracle, is a continuos work in progress. Each 1-2-3 weeks the data source system in the prod environment is updated with new tables or updated table (with new columns or altered columns). So, it is
important to apply in a rapid manner the related changes in the data structure of the SQL Server staging area and dwh.
The issues to solve are:
a. maintaining SQL Server data structure of the staging area aligned with the data structure of the Oracle data source;
b. maintaing SQL Server data structure of the staging area aligned with the data structure of the SQL Server staging area.
In order to solve these issues it could be useful to think to an authomatic manner to alert when a data structure change occurs and a simple manner to apply the changes on SQL Server data structure.
Any suggests, please? Many thanks

We use Oracle CDC service in SQLServer. It has a flag to indicate the schema changes happening at the Oracle end. We track the schema changes using it and then apply changes to sqlserver side. And regarding automation you can use Biml as suggested or .NET
scripts inside script task.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Exchange 2013: Problem with Default Global Address List after migration

I just completed a migration from Exchange 2007 to Exchange 2013. The 2007 box has been decommissioned just last week. I have been seeing weird issues with our offline addressbook and global address list, since the migration, but always thought
it was related to Ex2007. Well the issues still exist and here's what i've found so far:
1. If any user goes to Schedule Appointment in Outlook, and they click the Rooms button (on the Scheduling Assistant page), we get a LONG wait (about 5 mins or more) and then an error that says: "The operation could not be completed because
an offline address book is not available. Download a copy of the offline address book." When i click OK, the address book is up, with the "All Rooms" list showing blank (we have 3 rooms in Exchange currently).
2. Now if I go to the Address Book in Outlook it opens to the GAL and it's up to date... I can also force an update to the offline address book after adding a new group or entry, so i know offline address books are being updated properly and
working. HOWEVER, if i go to any of the other address lists (besides Contacts and GAL) under All Address Lists (All Contacts, All Groups, All Rooms, All Users and Public Folders) I get the same error given above: "The operation could not be
completed because an offline address book is not available. Download a copy of the offline address book."
3. I went to the Exchange 2013 EAC and went to Organization -> Address Lists. Everything under here said 'NO' under the Up-to-Date column. When i looked at the properties on each list, and clicked save, I had to update to the new version.
After doing this, the Up-to-Date column said 'YES'. I could do all lists EXCEPT for the GAL. It still says 'NO'
4. The last thing i did was set my Outlook to NOT be in cached mode. This should give me a direct connection to the GAL and all lists, if I'm not mistaken... So when i do this, I cannot even open see the GAL. The ONLY option in the
Address Book that comes up is Contacts (which are my personal ones).
5. I just now ran Get-GlobalAddressList | fl in powershell on the Ex2013 server. I see some things that make me wonder... First; nothing in the RecipientFilter field, however, there is something in the LdapRecipientFilter field.
Second; the RecipientFilterType field says "Legacy". and Third; the RecipientFilterApplied field says "False".
Didn't know what these should all be, but it appears maybe this is the cause of all my issues?? Can someone help me out here.. even if i have to recreate a new GAL, i'm fine with that, I just don't know all the steps to do so. I just need it
to work!
Thanks
Jeff
-Jeff

Hi,
In my opinion, it is better to confirm whether the GAL is good, first.
How about the GAL working in OWA?
If GAL working well in OWA, it seems the issue on the Outlook Client or Connectivity side.
Please trying to run Outlook on the safe mode to avoid some AVs, add-ins and firewall for testing.
Please follow the steps as below to narrow down the OAB issue.
Following are the locations that .lzx files in CAS server and BMX server:
CAS:
C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\OAB
MBX:
C:\Program Files\Micorosft\Exchange Server\V15\ExchangeOAB
Please verify whether the .lzx files update to the latest.
1. If the .lzx files in MBX server not update to the latest.
It should be an issue on the OAB generation side.
2. If the .lzx files in MBX server is latest, but CAS server not.
It should be a distribution issue.
1) Please run Get-OabVirtualDirectory command in EMS to verify whether at least one OAB VD exist in the org. If not, please create a new one.
2) Please make sure whether any setup for Web Distribution. Selecting the “Enabling an Offline Address Book for Web Distribution” checkbox.
3) Please force restart File Distribution services to distribute OAB files manually.
3. If the .lzx files in MBX server and CAS server are all update to the latest.
It should be the connectivity between CAS server and Client issue.
1)Please verify the network.
2)Please check DNS, MX, etc. configuration.
3)Please run “Test E-mail AutoConfiguration” to check the AutoDiscover details.
   Please make sure the OAB URLs are correct.
   If the OAB URLs are incorrect, please using following command to re-set them:
   Set-OABVirtualDirectory -Identity "ServerFQDN\OAB (Default Web Site)" -ExternalUrl
https://www.contoso.com/OAB -InternalUrl
https://mail.contoso.com/OAB
4)Please checking the App log and finding solutions from Microsoft Technet articles or KB, according to the Event ID.
5)If it still not working after performing the methods above unfortunately, please trying to re-build OAB Virtual Directory.
   Article for reference:
   Remove, Re-Create, and Reconnect an Offline Address Book Virtual Directory
http://technet.microsoft.com/en-us/library/bb123595(v=exchg.141).aspx
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

HT201699 I'm using an iPhone 4 which i purchased last month, there seems to be some kind of problem with the mobile data network

Hi,
I bought a new iPhone 4 last month, totally fell in love with it untill there was this problem regarding the apn disappearing. I manually added the apn info and it worked fine for some time but soon after I disabled the mobile data/3g connection and enabled it later I always use to get a msg saying "Could not activate mobile data network" even after it being active( 3g symbol always used to be poped up at the top). Though the apn is filled with a valid data it shows me the same msg over and over again. It some times works on rebooting but the rebooting the handset everytime i want to use the connection sounds very pestering. Please suggest me with somehting to get rid of this problem...

https://discussions.apple.com/message/21946322#21946322

Problem with the master data loads

Hi Guys,
I am trying to load 0MATERIAL_ATTR in QA,but it is throwing error(Record 2 :0MATERIAL : Data record 2 ('000000000000000012 '): Version '000000000000000012 ' is not va ) and also similar error is coming when i load for 0VERSION(Record 1 :0VERSION : Data record 1 ('000E '): Version '000 ' is not valid ).
but for the same master data object in development with the same R/3 data the loads are successful,only in QA it is giving the problem.

Hi Abdul,
Check if the data you are getting for the two fields in your data loading are correct. I think it has some illegal characters(I guess it has a trailing space). If possible try and correct it in the source system itself.
If you are doing full load for the master data, everytime the system is going to pull these values in and throw error. One other way of avoiding it will be to maintain routines to eliminate these.
The quickfix will be to correct it at the PSA level and load it again.
Regards.

Problem with 10.6.8 install after migration

moved from a 2010 iMac to a 2011 MacBook Pro... have Lion / Snow Leopard partition as the music software i use is still best on SL (10.6.8)
so when i got the new machine with Lion installed i partitioned the HD, installed 10.6.8. on the partition then Migrated over from the old
HD (an external drive clone of the iMac HD which had since been sold).Things seem fine but there's something going on.
Everytime i move anything on the desktop, Remove anything from the sidebar of the finder or Remove anything from the Doc it all
goes back to the way it was after reboot. Seems that none of these things are saved when rebooting and obviously its quite
unnerving. I have run updates and repaired permissions.
Any idea what is causing this? i really need to be able to resort my sidebar / re arrange my desktop / deleted question marks from my dock (uninstalled programs) none o

mgmtl wrote:
Everytime i move anything on the desktop, Remove anything from the sidebar of the finder or Remove anything from the Doc it all goes back to the way it was after reboot.
This sounds like a corrupted preference (plist) file behavior. Basically your "changes" are not being saved to the file on disk, only remain in memory and when you power off and back on the old changes return.
Reinstalling OS X won't help here, it's in your Users/Library/Preferences folder.
Just scroll down in there and delete anything
com.apple.dockpreferences.plist
com.apple.finderpreferences.plist
looking and reboot, the files will get rebuilt.
Also run all of OnyX's cleaning and maintainence aspects and reboot for good measure.
http://www.titanium.free.fr/

Problem with R/3 Data Source based on Function module in SAP BI

Hi,
We have a data source based on functional module. When we load data from R/3 to BI we face the following error.
" No end-confirmation arrived in the Warehouse from the source system."
We are getting data but due to no end confirmation from the source system, the load become timed-out and status becomes "RED". When we change the status to be "GREEN" and proceed tha load further, load is fine.
Please suggest us a suitable solution.
Thanks in Advance,
Geetha

Hi Geetha Devi Ramalingam.
I faced the same problem since yesterday. I just resolve the issue.
So here is my solution :
try this code :
    FETCH NEXT CURSOR s_cursor
               APPENDING CORRESPONDING FIELDS
               OF TABLE e_t_data
               PACKAGE SIZE s_s_if-maxsize.
    IF sy-subrc <> 0.
      CLOSE CURSOR s_cursor.
      RAISE no_more_data.
    ENDIF.
if you add your
bold
IF sy-subrc <> 0.
      CLOSE CURSOR s_cursor.
      RAISE no_more_data.
    ENDIF.
bold
than the sy-subrc may be equal and than your CLOSE CURSOR s_cursor. will have no effect
it work for me hope it will for u
Hard luck!
Salah
Edited by: idrissi salaheddine on Jan 19, 2012 12:24 PM

Problem with multiple XML data sources

Hi there,
I have a template (i'm using XML publisher). I need to use 2 different XML data files in the same template, but i couldn't find any way of doing so. Can somebody help me with this issue please? You obviously cannot load 2 XML Data sources in the same template.
Thanks and Regards,
Luke

Is your xml stored some where,
then
Create datatemplate and use the xml as datasource.
You can create it using the following sysntax
<dataTemplate name="Employee" description="L" version="1.0">
<dataQuery>
<xml name="xml_emp" expressionPath=".//ROW">
<url method="GET" realm="" username="" password="">
file:///C:/dept_employee.xml</url>
</xml>
<xml name="xml_dept" expressionPath=".//ROW">
<url method="GET" realm="" username="" password="">
file:///C:/dept.xml</url>
</xml>
</dataQuery>
<dataStructure>
<group name="EMP" source="empxml">
<element name="NAME" value="ENAME"/>
your element here
</group>
<group name="DEPT" source="xm_DEPTl">
<element name="DNAME" value="DPTNAME"/>
your element from 2nd xml here
</group>
</dataStructure>
</dataTemplate>
Now your two xml source will become single source for the report.

Javacomm: problem with the receive data

Hello to all,
I have a problem on receiving data from a serial port.
As I figured out The port is obtained by the program I post
here bellow..but I can't receive data.
Do you have any hints?
Thanks in advance.
Mandy
import javax.comm.*;
import java.io.*;
public class SerialRead extends Thread implements SerialPortEventListener
     private InputStream in;
     public SerialRead(String port)
          try
               CommPortIdentifier id_porta;
               id_porta = CommPortIdentifier.getPortIdentifier(port);
               CommPort porta = id_porta.open("Read from serial porta", 200);
               in = porta.getInputStream();
               SerialPort porta_seriale = (SerialPort)porta;
               porta_seriale.setSerialPortParams(9600, SerialPort.DATABITS_8,
                    SerialPort.STOPBITS_1, SerialPort.PARITY_NONE);
               porta_seriale.addEventListener(this);
               this.start();
          catch (NoSuchPortException ne)
               System.out.println("The port " + port + "is not present");
          catch (PortInUseException pe)
               System.out.println("The port " + port + "is used by " + pe.
                    currentOwner);
          catch (UnsupportedCommOperationException ue)
               System.out.println(
                    "The porta does not support the properties defined");
          catch (java.util.TooManyListenersException tme)
               System.out.println(
                    "Ther can be only one owner of the port");
          catch (IOException ioe)
               System.out.println("Error ofi IO");
     public void run()
          try
               Thread.sleep(10000);
          catch (InterruptedException e)
     public void serialEvent(SerialPortEvent event)
          System.out.println("1");
         switch ( event.getEventType() )
               case SerialPortEvent.BI :
               case SerialPortEvent.OE :
               case SerialPortEvent.FE :
               case SerialPortEvent.PE :
               case SerialPortEvent.CD :
               case SerialPortEvent.CTS :
               case SerialPortEvent.DSR :
               case SerialPortEvent.RI :
               case SerialPortEvent.OUTPUT_BUFFER_EMPTY :
                    break;
               case SerialPortEvent.DATA_AVAILABLE :
                    byte[] readBuffer = new byte[20];
                    try
                         while ( in.available() > 0 )
                              int numBytes = in.read(readBuffer);
                         System.out.println(new String(readBuffer));
                    catch (IOException e)
                    break;
     public static void main(String[] args)
         System.out.println(args[0]);
         if ( args.length < 1 )
               System.out.println("Use java SerialRead <port name>");
          else
               SerialRead reading = new SerialRead(args[0]);
}

Hi Abdul,
Check if the data you are getting for the two fields in your data loading are correct. I think it has some illegal characters(I guess it has a trailing space). If possible try and correct it in the source system itself.
If you are doing full load for the master data, everytime the system is going to pull these values in and throw error. One other way of avoiding it will be to maintain routines to eliminate these.
The quickfix will be to correct it at the PSA level and load it again.
Regards.

Problem with the ECC6 Data sources after migration

Similar Messages

Maybe you are looking for