Problem with the Export/Import Utility when importing a .portal file

Hi there !
I got the following error when trying to import a .portal file to a desktop by using the Export/Import Utility.
<13-11-2009 12:13:26 PM CLST> <Error> <netuix> <BEA-423487> <Import: did not add navigable [2203] as it would cause an illegal dependency.>
The error is shown several times, starting from the number [2203] until [2285].
It causes that i can't see some pages of my portal... it's like they dont exist.
I Hope you can help me fix it, because i have not found any information about it.
Best regards
P.D.: I am using the BEA Weblogic 10.0.1 version.
Edited by: user12231353 on 16-nov-2009 12:38

I upgraded to cs6 and imported all the images together, I made them 3 frames per and exported them. The problem is slightly improved but still there. I'm still getting flicker.
Check it out: http://www.youtube.com/watch?v=g_yZjskzTLs
Black screen version from yesterday if you want to look at it: http://www.youtube.com/watch?v=NCcAEO8YU6Y
The problem has to be with my settings. when I upgraded it deleted all my prefrences and settings. There was no dslr preset either so I had to redo it all from  scratch to the best of my ability. Here is a complete rundown of my settings:
I shoot with a canon dslr 60D in 24fps and upload all my stuff in 1080p. Please advice.

Similar Messages

  • Many problems with the 'Export to Text' (.txt) in CR Xi

    Hi,
    I have listed many problems with the 'Export to Text' (.txt) function of CR Xi.
    These problems are related to this export format only (meaning everything works fine in the Viewer or in the 'Export to PDF')...
    - Multi-columns layout do not export as Multi-column (export only a one column);
    - Numeric values with parenthesis for negative values or with a fix currency sign at the leftmost position are not exported correctly;
    - Fields having a Suppress formula which is "WhilePrintingRecords" do not appears when exported;
    - Fields with 'Suppress double value' checked are not always suppressed when exported to Text.
    - 'Keep Group Together' flag is not working.
    - 'Reset Page Number After' simply does not works when exported to text;
    - 'Keep object together' on TextBox/Section is not working.
    - Whenever a group is ending on the last line of a page, the the following page as the same Group header as the previous group with no records until the page is filled, then the PageBreak and PageHeader is missing but the records of the following group appears.
    I would like to know what is the status of the 'Export to Text' function (is it a deprecated function not supported anymore???).
    If still supported, when will these bugs be fixed???
    Thanks

    Hi Rene
    Export to Text is supported till date. Crystal Reports 2008 also supports this with Keep together working however when I tried with format with multiple columns, it didnot show up in the exported text file.
    Regards
    Sourashree

  • I am having problems with the Preview application.  When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it.   Any ideas on how to resolve this problem?  Thanks for any help

    I am having problems with the Preview application.  When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it.   Any ideas on how to resolve this problem?  Thanks for any help

    Can you open the Preview program without loading a file, like by itself?
    If it doesn't load then I suspect a corrupt Preview preference file.
    Deleting the System Preference or other .plist file
    Can you open other files with Preview, like jpg's and images?
    How about other PDFs? or is it just that one you have downloaded?
    Run through this list of fixes
    Step by Step to fix your Mac

  • Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the  photo editing section,and no other application. My mouse drivers a

    Has anybody had a problem with the mouse cursor lagging when navigating the drop down menus? this only started happening after a re-install. it only occurs in Photoshop elements 13 in the  photo editing section,and no other application. My mouse drivers are up to date.Any help or advice would be most welcome.

    Good day!
    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements
    and please read this (in particular the section titled "Supply pertinent information for quicker answers"):
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
    Regards,
    Pfaffenbichler

  • There is a problem with the phone app. When I want to call somebody the phone screen come too late. This will cause a problem if I call the wrong number

    There is a problem with the phone app. When I want to call somebody the phone screen come too late. This will cause a problem if I call the wrong number.  Apple please please please fix it as soon as possible and also check why the phone is always restart. I prefer to let us use the iOS 7 until you finished from the IOS 8 because Ios 8 still under construction  there is a tones problems in the system.  And this Will cause undirect problem for the iPhone 6

    There is no apple here in this user to user technical forum.
    Do this Use iTunes to restore your iOS device to factory settings

  • I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should lo

    I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should look and B is what happens after I have I opened several tabs. I can get it back to normal if I click on VIEW than click on customize. When the customize window appears FireFox returns to its normal state. I than click on the done box and go back to what I have been doing. I tried resetting FireFox back to default settings, but that did not correct the problem.
    This began happening about a month ago. Is there a way I can fix this problem? Thanks for your help.I don't know how to attach my 2 attachments that shows the problem I am having.
    [email address removed to protect your privacy and security]
    <! [email protected] -->

    I found the images here: https://support.mozilla.org/en-US/questions/977542#answer-501598

  • Getting problem with the new java.util.concurrent package

    i m using the new concurrency package of jdk 1.5 in my code. see the line:
    Executor threadPool = Executors.newCachedThreadPool();
    about this, api doc says Creates a thread pool that creates new threads as needed, but will reuse previously constructed threads when they are available
    but i dont find this method to create new threads whenever required. please tell me about this.
    in my code, in some rare cases many threads r created, and very difficult to detect the number of active threads.
    as the previous one failed i tried with another one newFixedThreadPool(int). but here i got another problem. it works successfully but i dont understand what should be the size of the pool. i tried with 1000, it works well, but in a very rare case, it failed also. then i tried with 10000. but i m still confused, i dont know whether it would work always or not. with traditional threads my code never fails.
    please tell me, what should be the size of the pool and also let me know what is the problem with the first one (newCachedThreadPool)

    The thread pool should not be more than 100 threads. Ideally you should only have a small number of threads per CPU. If your threads are not long running it is possible that you could add 10,000 runnables but on start a small number of threads. Note, adding a thread take a non trivial amount of time so while the thread is added, all the others could finish. This could mean the number of threads could be 140 or smaller.
    Have you looked at the code to see what it does?

  • Anyone have a problem with the iPhone 6 freezing when you're trying to send a text?

    I seem to be having a couple of problems with the iPhone 6 or possibly the update 8.1.2.  Sometimes when I turn the phone horizontally to text, nothing happens and it only works if I turn it back vertically.  Also, sometimes when I receive a call from someone who is already on my contact list, only the number shows up and not the name or picture connected with that contact.  It appears when I answer, but sometimes I don't want to answer if I don't recognize the number.
    Anyone else having these issues?  Do we need another update to the software to fix these problems?

    How much available storage do you have on your iPhone? You can find this at Settings>General>Usage
    If your available space is measured in megabytes (MB) then it is causing problems for your phone's operating system.
    If your available space is measured in gigabytes (GB) then that isn't the source of the problems and you can move to some other troubleshooting steps. First, try a simple restart  (holding the sleep wake button for about 5 seconds until the power off slider appears).
    If the problems reoccur after you've restarted the phone, I recommend Reset All Settings, which is located in Settings>General>Reset

  • Problem with the scale of pictures when importing.

    I have taken 250 images which I will edit into a stop motion film. however, I've encountered a few problems.
    The biggest problem is that when I imported the images into the timeline they were severely magnified and not even centered in the frame. as you can see by this screenshot:
    This is a big problem. You'd think I wouldn't have to go through every signle image and scale it down to correctly fit the frame..... right?? It's not even centered which means I have to scale and move and be very accurate and it's going to take so many hours to do! What is wrong here, how do I fix it so that when I import the images, they are the correct scale?
    problem 2: when i put the images in the timeline they were "backwards". As in, the last image was first in the timeline and the first image was last. It's like the program is TRYING to make my life a living hell.

    I upgraded to cs6 and imported all the images together, I made them 3 frames per and exported them. The problem is slightly improved but still there. I'm still getting flicker.
    Check it out: http://www.youtube.com/watch?v=g_yZjskzTLs
    Black screen version from yesterday if you want to look at it: http://www.youtube.com/watch?v=NCcAEO8YU6Y
    The problem has to be with my settings. when I upgraded it deleted all my prefrences and settings. There was no dslr preset either so I had to redo it all from  scratch to the best of my ability. Here is a complete rundown of my settings:
    I shoot with a canon dslr 60D in 24fps and upload all my stuff in 1080p. Please advice.

  • Problem with image export to epub when I work with ID cs6 (update)

    I creat a document and I select the page size as ipad，and later I export it into epub，put it my ipad（ibooks）
    but the problem comes，the image size is not right in my ipad
    for example，i set image width as 50%，and it looks good in adobe digital edition，it‘s 50% width.
    but it's 100%(or some  percent) in ipad(ibooks)
    i delete the cs6 version and install cs5.5, recreat a document,the problem has gone.
    but when i open the documnet with cs6,the problem comes again.
    please fix the bug.Thanks a lot.
    I‘ve found what’s wrong with cs6
    in the xhtml file，cs6 describe the image as this
    <p class="for-image"><span class="frame-2"><img alt="A1.jpg" class="frame-1" src="../Images/A1_opt.jpeg"  /></span> </p>
    but in cs5.5，it‘s this
    <p class="for-image"><img alt="A1.jpg" class="frame-1" src="../Images/A1_opt.jpeg" width="50%" /></p>
    so，we can find cs6 missed the style   width="50%"
    that’s why the image dose not be the size I've set when I see it in my ipad
    It's a unforgiven mistake. so can anybody report to Adobe to fix it??!!
    Message was edited by: zhanghami

    Does your anti virus program filter spam or junk mail? does your mail provider? are these accounts IMAP or POP?

  • Are there still problems with the free Iwork trial when you then buy it?

    Hi all,
    new macbook user - it's brilliant by the way, and first post on here so hi all.
    Saw this thread via a search, and saw similar points on an Amazon review:
    http://discussions.info.apple.com/thread.jspa?threadID=2202953
    Does anyone know if this problem still exists (thread was some time ago) or can I download the free trial without worrying (would like to do some work this weekend and dont want to wait for delivery of the software - I def plan to buy it).
    Apols if the topic has been recently covered, please direct me to that if so
    Thanks

    Apple made a decision which boggles my mind: there are two versions of iWork, one you purchase online getting a serial number you apply to the demo. The demo contains the full contents of the program, you lose nothing by purchasing the program this way. The other version of iWork is a boxed copy, the same as the demo+serial# except that this version requires no serial number. Mixing the two creates unhappy people
    If you download the demo and then purchase the boxed version you must remove the demo (and all support files and preferences associated with the demo) before installing the disc copy. If you don't, the program thinks you need a serial number and continues working in demo mode until it expires.
    If you can't wait for the box to arrive, why not just download the demo and purchase the serial# online from Apple?

  • Problem with the "Quit Unexpectedly" message when trying to launch Pro?

    Earlier in the day I downloaded the NVidia Cuda GPU accelerator and installed it for AE.  Later I left my computer during editing for an emergency and when I returned the computer had put itself in the sleep mode and dumped out of the program.  Now when I try to launch Pro I get the "Adobe Premiere Pro CC quit unexpectedly" message.  I have tried all 3 options and can send a message to Apple but Prem Pro will not launch!  AE will not launch either so I suspect the Cuda program and i have deleted it but no luck!  Still will not launch.  Help!

    Hi Peter,
    Please remove cuda from the following locations and then try to launch Premiere Pro and After Effects:
    /System/Library/Extensions/CUDA.kext
    /Library/Frameworks/CUDA.framework
    /Library/LaunchAgents/com.nvidia.CUDASoftwareUpdate.plist
    /Library/PreferencePanes/CUDA/Preferences.prefPane
    /System/Library/StartupItems/CUDA/
    /usr/local/cuda
    Please reply if the issue persists.
    Thanks

  • Problem with the wrong host name, when accessing IR or ID

    Hey all,
    I am trying to accessing the IR and ID at my client however the wrong host name is being called. For instance the
    URL should start nero.bcm.tmc.edu, but it is calling just nero. The basis guy here fixed a similar problem in the exchange profile for calling the Builder start page, where do we need to fix the problems for accessiing the IR and ID for the start page?
    Kind regards,
    Chris

    Problem reso;ved, just had to restart XI for the changes to take effect

  • The problem with the correct diagnosis sensitive when exporting PDF to RTF

    Welcome.
    I came across the following error when converting PDF files to RTF program "Adobe Acrobat XI Pro" - it happens that some files (unfortunately, they form the majority of those who support it) some letters for some reason are not properly converted - for example, instead of getting a word in capital letters word in which the first letter is small and the other large. This is just one of many examples - "POLICE" -> "pOLICE", etc.
    Can someone already encountered a similar problem?Is interesting to add that when I open this PDF in the "Adobe Reader" and choose "save as" -> "text" - the letters are incorrect.
    I apologize in advance for any spelling mistakes - the text is translated automatically :-)
    PDF:
    RTF:

    Unfortunately, this was afraid ... I understand that there is no way to get around this? I do not have any influence on how the PDF files are created - just get there already, and I bring them into a fully editable (RTF).

  • Facing a stubborn problem with the security note utility.

    My system will not allow some users due to authorization issue.
    I have looked at the access over and over again without avail.
    Any additional tips would be appreciated from admins who have had issues with rsecnote utility.
    Points will be awarded for helpful suggestions.
    Cheers
    Roger

    Jared,
    The solution was simple really. Object security-check was set incorrectly as "security_check"
    The appropriate authorization is duly noted in 888889.
    Cheers
    Roger

Maybe you are looking for