Problem with the External send output for Portugal in Smartforms

Hello All,
I am facing an issue with a particular outtype for external send for portugal country.The print priview is of different font than original font of the form.
But When the same output type is assigned with the print output the form is showing the font with the original fonts of the form.
can any one suggest the solution for this?

Hello ,
Actually the same external send output type is working fine in the development system.This is having issue only in quality system.
And the condition records are maintained same in both dev system and quality system.
Does the capturing of Font play any Role...
I read some where that sometimes in translations a particular coutry might not hold the fonts.
Regards,
Varun

Similar Messages

I have a problem with the external sound of my ipod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

I have a problem with the external sound of my iPod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

- Try insering and removing the headphone plug a dozen times or so.
- Try cleaning out the headphone jack in the iPod.
- Resett he iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restoe to factory defaults/new iPod
If yu still have the problem that indicates a hardware problem, likely a bad headphone jack. Yu can make an appointment at the Genius Bar of an Apple store to confirm.
If not underwarranty Apple will only exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
A third-party place like the following is less expensive. Here is one. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

I keep getting a message about a problem with the plug in container for firefox. what does it mean?

I am getting a pop up box saying that there is a problem with the plug in container for firefox. It keeps saying do I want windows to find a fix for it and close it or do I just want to close the program. What is this plug in container for firefox and why am I constantly getting this message? It has been happening for the past month or two.

It means either you have a faulty/out of date plugin, or your firewall/antivirus is causing problems with Firefox.
Make sure you update all your plugins and disable unwanted ones.
https://www.mozilla.org/en-US/plugincheck/
https://support.mozilla.org/en-US/kb/disable-or-remove-add-ons
Also, make sure your firewall/antivirus is not blocking plugincontainer.exe from the Firefox folder in your computer. How you make sure that's not the case will depend on your firewall/antivirus.

There seems to be a problem with the file download. For troubleshooting tips, please visit our customer support page

There seems to be a problem with the file download. For troubleshooting tips, please visit our customer support page.

Thank you for the update Dlawrenceusa. I would recommend reviewing the installation logs for the updates that are failing to apply to determine the exact cause of the failure. You can find details on how to locate and interpret the installation log files at Creative Cloud Help / Troubleshoot install issues with log files | CC. You are welcome to post any specific error messages you discover to this discussion.

Is anyone else having problems with the new software update for macbook? I get random clicking and flicker an movement of the pointer!

Is anyone else having problems with the new software update for macbook? I get random clicking and flicker an movement of the pointer!

OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

WLC (Foreign-Anchor), problem with the external web auth -- ISE

hello guys
I am currently designing a platform for a guest network, which must be isolated from the local network, the following equipment:
ISE 1.2 (Cisco SNS- 3415-K9)
WLC 7.0.230.0 (Cisco controller 5508)---> wlc Foreign
WLC 7.0.230.0 (Cisco controller 5508)---> wlc Anchor.
The EoIP tunnel between wlc is performed successfully.
The wireless client gets IP address of the anchor wlc (DHCP server).
Test 1:
I configure the WLC ANCHOR with local web authentication (internal), the wireless client is authenticated by WLC and navigate successfully.
Test 2:
Configure the WLC to anchor external web authentication (ISE). configure a user in ISE guest portal.
The wireless client gets IP address of the anchor wlc (DHCP server), attempting to navigate not display the guest portal.
Debug a wireless client trying to connect to the guest network is attached.

Thanks for your help Scott...
Now I presents another problem with the guest portal page. The wireless client obtains IP address and managed to reach the guest portal page, then enter the username and password page tells me it was successful. When I try to browse again brings me to the portal visitor page and asks me to enter user name and password.
test 1:
the username and password created for away was verified.
Scoot will have some implementation details with the same scenario I am developing? I think I'm missing some details in the ISE does not allow me to navigate the entrance for visitors to be successful.

Numerous problems with the Adobe AIR runtime for Android

I created a app on the platform Adobe AIR for Android, which requires for AIR. The app is very popular in the Android Market, but many users complain of problems with the installation of Adobe Air runtime.
For example these phones users: LGE LG-P698, LG Pecan, HTC Wildfire. But judging by the fact that users have access to the installation of Air, their phones are compatible with it.
Tell me how do I solve the problem?
In addition, I have a few questions:
1. Decides whether the problem of export application with embedded AIR runtime?
2. I build my apps with the help of ADT. How in this case to make embeding AIR runtime?
3. Is it possible to prompt the user to download and install older versions of AIR? Where to find its?
I hope to help, because the problem is global.

Hi Astraport,
I think you should embed the air runtime in your application,
Some time ago I've written a step by step guide, have a look at this post:
http://forums.adobe.com/message/3961579#3961579
I hope it helps

Has anyone had problems with the latest driver update for the Lexmark printers? My Lexmark printers won't work with the latest driver update.

Has anyone had problems with the latest Lexmark printer driver update? My Lexmark printers won't work with the latest driver update. If I reinstall an older version of the drivers, they work.

Mine crashed once with new update, but working fine.
I had to delete old printer, restart iMac, and then reinstall
new drivers to get it to work. Would not complete without
the restart after deleting non-working printer. No problems
since and all features working.

Satellite Pro A120: I have problems with the graphics driver installation for W2k

I have installed windows 2000 on an A120 the system is fully service packed and up to date before I even begin installing the required drivers I am unable to restart the system. Once I install the drivers as recommended I have problems with the graphics driver as it will not install because it requires a restart and then I am unable to install any new programs that require a restart as the driver has not installed correctly.
The laptop is a A120 Pro, 1 week old and came with XP home, because of this toshiba will not offer me support as I have changed the O/S even though they obviously support 2000 on this laptop as they supply the drivers.
Any ideas would be greatly appreciated.

the reason the driver is not working is down to a problem with the windows 2000 not having the ability to reboot.
When you select restart the system appears to power down then stays switched on. Now if I try to install software I get an error saying that the system needs to complete a restart to finish the install of the driver.
The restart problem happens as soon as win2k is installed as although I have now shipped the laptop to the sales team I have another one which has just had a clean install of win2k without any drivers and the fault is present on this one.
I am thinking it could be to do with power management but I'm not to sure as I have never come across this as I normally purchase machines which accept just about any O/S.

A little problem with the "Audio-MIDI Config" for my Edirol "FA-101"

Hi to all of you!
I bought an Edirol "FA-101" a couple weeks ago, and when I try to plug and record with many mics, from the backside inputs, it seems that these inputs don't give me the "punch" I need. I mean by that that I have to go trough my old Tascam "M-30" in way to use the preamps from the mixer, so I can have a little more input "volume", and then, plug the direct output from the mixer and then plug it in the back inputs of the "FA-101".
I was wondering why do I need to do that? Cause when I take a look at the "Audio-MIDI Config" (I do work in french, so, apologize for any translations errors), the "AMC" window don't show any inputs as "selectable", and, or, "ajustable". The link bellow shows the exact copy of what I see when I open the "AMC" set-up window:
http://www.geocities.com/macjamsimages/configaudiomidi.jpg
Now, I have to explain that I had some problems in the past, when installing QT 7. I tried to remove QT 7, but I think I removed some files, maybe importants ones. So, now, what I want to know, is if that setup is normal, and impossible to configure, or is it MacOS Panther 10.3.9 that need a reinstall?
And I have to say that GB and Logic Express both recognize the "FA-101" as audio inputs. But need a little help from the mixer.
Thanks in advance!

The inputs on the back of the Edirol unit are LINE LEVEL inputs, meaning they are require a high level of voltage to give a level. A microphone plugged directly into this input will not give you the required voltage, if you were to plug either the outputs of a mixing desk or something like a CD player into it you would get a level.
First of all you must use a microphone preamplifier, like the ones on the front panel. There are thousands of companies producing these and it shouldn't be hard to find them. You could also use any mixing desk which has multiple outputs, so as to split the channels out to the relevant channels in logic.
Hope this helps.

I can't synchronize my iPod's with my iTunes software (Windows Vista Home Premium) due to problems with the access authorization / rights for this operation

Hi there,
I'd like to ask you something:
I'm trying to synchronize all my iPod's (I have as many as 4 iPods: 2 iPod touch a 8 GB each and 2 iPod classic a 160 GB each) with my iTunes software (Version 11.3.1 which is installed on a Windows PC (Windows Vista Home Premium)). Unfortunately, the iTunes software refuses to run the command "synchronize with the iPod connected" regarding each and every iPod I have. iTunes just declares:
Synchronizing is impossible because I wouldn't hold the access authorization / rights for this operation.
I uploaded the songs at issue to my iTunes folder from CD's (all songs are in AAC format now).
What is this access authorization, why was something like that invented and what can I do to get it?
How do I have to proceed in detail?
What would it cost?
I am brand new here and have never ever made a post in any support community anywhere in the world in my life. Well, and I am not excessively knowledgeable about the particular computer or mac language but I know the very basics or can find out about them.
Anyways - can you help me please?
If you can't help me, who can do so?
It would be nice if you could answer me as soon as possible!
Thank you guys
Prying Pedro

Yes, others have experienced the problem, a simple search of the forums would have revealed that and the simple solution.
Termporarily disable any security software on the computer.

Problem with the flash players version for adobe connect

Hi, i install the flashplayer version 11 on my computer but adobe connect ask me for flash player 10.3.
Is there a problem with adobe connect with the flash player 11 ?
thansk
[email protected]

Try the Flash forum.

I am having difficult problems with the FocusritePro14 it works for a few then the firewire light flashes it cuts in an out then my MacBookPro crashes and restarts what can be the problem?

I am trying to figure out why this interface never works like it should, I have the lastest drivers 10.8 OS, The firewire cuts in an out and then crahses my computer, it was working fine for a good month, and then it does this. The people at Focusrite are clueless to what is going on. This is horrible engenerring on there part. There are three lights on the interface they all light up, then half way through a recording or just lisiting to music, the FW light flashes and cuts out, and now the mac is rebooting when it does that. I highly doubt it is a simple fix, or a bad wire. I have the original cable for the interface that came with it, hooked up to a sonet adapter to fit in the macbook pro because the geniuses at apple decided that they would make that port small.
Sorry about mispeling its 3 am here in Ohio. Please can someone help
Thank you

Hello Bagpus113
Check out the article below to troubleshooting issues with the sound for music and for videos. One other thing you can try is to convert the songs to a different format
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
iTunes: How to convert a song to a different file format
http://support.apple.com/kb/ht1550
Regards,
-Norm G.

Is there a known problem with the latest Shockwave player for Windows that will reboot a user without notification"

This problem is not with the actual Shockwave Application but the patch. Thanks!

This behavior was first observed with the 12.1.6.156 patch. The command line used to install the patch is: sw_lic_full_installer.exe /S. The /S switch installs the patch silently. However, in some cases, computers reboot without prompting the user

Problems with the canon xf plugin for fcp 7 Can't log and transfer mxf files.

Hi
I can't log & transfer mxf files from a c300 camera in FCP 7 even though I installed the xf plugin.
When I looked at canon's website this link comes up but it doesn't work.
http://usa.canon.com/nw3s/CanonUSA/DownloadContents/English/0200206002EN.htm
Any suggestions?
Or other plugins that might work?
Thanks,
James

Hello jameskendi,
The most obvious reason we can tell as to why this may not work properly is the version of FCP you are using. You mention using FCP 7, although the plugin is specifically for FCP X. This is why you're having such difficulty. If possible, we'd recommend using an updated computer and or software to process these files.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Problem with the External send output for Portugal in Smartforms

Similar Messages

Maybe you are looking for