Problem with the gateway protection
a few days ago I successfully installed the router WRT54G2 for a wireless broadband connection and I set the wep protection. Today I was suggested to change the security WPA2: I opened the window EasyLink Advisor, I went to tools and then in the keys protection control menù (the icon is represented by 2 keys) and I changed the protection from wep to WPA2 ; after I clikked on forward I was no longer able to create a connection. After several attempts and configurations I created a wireless connection, but checking the details of the gateway, I noticed that the "Wireless Encryption" is written "none" therefore now I am afraid that is not protected. Checking the details of my connection the wireless connection is set on wpa2: is it normal that my connection is wpa2 protected and the gateway no?
I would reinstall everything using the cd that came with the router: How do I reset everything and make the reinstallation ends successfully without any problems?
thanks
To reset your router press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
To re-configure the router don't use the CD, instead :
If your ISP is Cable go here
If your ISP is DSL go here
To enable Security go here
Similar Messages
-
I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. -
I am having a problem with the FireFox browser. I have attached two files that best describe the problem. I have labeled them A & B. A is the way it should look and B is what happens after I have I opened several tabs. I can get it back to normal if I click on VIEW than click on customize. When the customize window appears FireFox returns to its normal state. I than click on the done box and go back to what I have been doing. I tried resetting FireFox back to default settings, but that did not correct the problem.
This began happening about a month ago. Is there a way I can fix this problem? Thanks for your help.I don't know how to attach my 2 attachments that shows the problem I am having.
[email address removed to protect your privacy and security]
<! [email protected] -->I found the images here: https://support.mozilla.org/en-US/questions/977542#answer-501598
-
I am having email problems with the new Mountain Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help
Incoming Mail (IMAP) Server - requires SSL:
imap.gmail.com
Use SSL: Yes
Port: 993
Outgoing Mail (SMTP) Server - requires TLS:
smtp.gmail.com (use authentication)
Use Authentication: Yes
Use STARTTLS: Yes (some clients call this SSL)
Port: 465 or 587
Account Name:
your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
Email Address:
your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
Password:
your Gmail password
The Quick Answer
Follow the instructions below to set up IMAP1 access in most email clients.
Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option? The next page under ADVANCED: THERE IS A BOX SSL MARKED. Then IMAP Path Prefix - I put stmp.gmail.com.. is that right? Port 993 can use this one? as 456 doesn't work and 587 said it wasn't safe. Under AUTHENTICATION I used PASSWORD. Should I have used external client cert TLS?
Please help me set this up securely. ThanksApple - Support - Mail Setup Assistant
-
There's a problem with the recipient's mailbox. Please try resending this message.
I have a user who cannot receive a message from a particular external sender. That senders assistant (same domain and server as the external sender with the issue) is able to forward the exact same message to my user and it arrives as it should. In
message tracking, I can see the message came in through my smart host, through my front end and to the users mailbox server, where an NDR was generated. We had the assistant forward us the NDR and it says:
There's a problem with the recipient's mailbox. Please try resending this message. If the problem continues, please contact your helpdesk.
From my 3rd party smart host/spam filter, I have a copy of the message in audit and when I forward it to myself, the same thing happens - it generates an NDR when it arrives at my Exchange mailbox server. This makes me conclude that my end users mailbox
isn't corrupt, rather it's something in the message header that our server doesn't like (I've seen this happen with other senders as well, but it is extremely rare and random).
Details/facts of my environment:
-Current production messaging system is Exchange 2003.
-Working on Exchange 2010 co-existence.
-This problem between this sender and us has been an issue before the introduction of Exchange 2010.
-I'm hoping to begin end user mailbox migrations to 2010 and will have the sender try again at that time, but I still have testing to do with our voice messaging system before I can begin moving end user mailboxes.
....Begin redacted NDR detail....
Remote Server returned '< #5.2.1>'
Original message headers:
Received: from fe.mydomain.com ([192.168.1.10]) by
mailboxsrv.mydomain.com with Microsoft SMTPSVC(6.0.3790.4675); Thu, 4 Sep
2014 12:49:48 -0700
Received: from exc2010.mydomain.com ([192.168.1.50]) by
fe.mydomain.com with Microsoft SMTPSVC(6.0.3790.4675); Thu, 4 Sep
2014 12:49:47 -0700
Received: from smtp.mydomain.com (192.168.1.49) by exch2010.mydomain.com
(192.168.1.50) with Microsoft SMTP Server (TLS) id 14.3.210.2; Thu, 4 Sep 2014
12:49:47 -0700
Received: from pps.filterd (PPMail.mydomain.com [127.0.0.1]) by
PPMail.gsblaw.com (8.14.5/8.14.5) with SMTP id s84Jkb0n023682 for
<[email protected]>; Thu, 4 Sep 2014 12:49:47 -0700
Received: from na01-by2-obe.outbound.protection.outlook.com
(mail-by2on0098.outbound.protection.outlook.com [TheirIP]) by
PPMail.gsblaw.com with ESMTP id 1p6da7h0jw-1 (version=TLSv1/SSLv3
cipher=AES256-SHA bits=256 verify=NOT) for <[email protected]>; Thu, 04 Sep
2014 12:49:42 -0700
Received: from Theirexchange.theirdomain.com (TheirinternalIP) by
Theirexchange.theirdomain.com (TheirinternalIP) with Microsoft SMTP
Server (TLS) id 15.0.1019.16; Thu, 4 Sep 2014 19:49:38 +0000
Received: from Theirexchange.theirdomain.com ([10.141.86.14]) by
Theirexchange.theirdomain.com ([TheirinternalIP]) with mapi id
15.00.1019.015; Thu, 4 Sep 2014 19:49:38 +0000
Content-Type: multipart/mixed;
boundary="_000_9a166afd24964edda2d5439ba3dbe712DM2PR08MB445namprd08pro_"
From: Mr Sender <[email protected]>
To: My User <[email protected]>, "Another external recipient ([email protected])"
<[email protected]>
Subject: FW: A Subject
Thread-Topic: A Subject
Thread-Index: Ac/C2zn97ruwXQpoQtGNrjKOr1NckgFmNoeAAAEpQ2A=
Date: Thu, 4 Sep 2014 19:49:37 +0000
Message-ID: <[email protected]domain.com>
References: <[email protected]domain.com>
<[email protected]ET>
In-Reply-To: <>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator: <[email protected]domain.com>
x-ms-exchange-transport-fromentityheader: Hosted
x-originating-ip: [internetIP]
x-microsoft-antispam: BCL:0;PCL:0;RULEID:;UriScan:;
x-forefront-prvs: 0324C2C0E2
x-forefront-antispam-report: SFV:NSPM;SFS:(10009015)(6009001)(189002)(199003)(377454003)(164054003)(64706001)(66066001)(19609705001)(15202345003)(50986999)(19300405004)(19625215002)(90102001)(80022001)(20776003)(83322001)(101416001)(99936001)(76176999)(54356999)(81542001)(21056001)(19580395003)(86362001)(4396001)(92566001)(16236675004)(85852003)(551944002)(74502001)(83072002)(87936001)(74662001)(31966008)(107886001)(81342001)(76482001)(46102001)(85306004)(105586002)(33646002)(15975445006)(99396002)(76576001)(74316001)(77982001)(79102001)(95666004)(108616004)(2656002)(106356001)(99286002)(24736002);DIR:OUT;SFP:1101;SCL:1;SRVR:DM2PR08MB446;H:DM2PR08MB445.namprd08.prod.outlook.com;FPR:;MLV:sfv;PTR:InfoNoRecords;MX:1;A:1;LANG:en;
MIME-Version: 1.0
X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:5.12.52,1.0.27,0.0.0000
definitions=2014-09-04_03:2014-09-04,2014-09-04,1970-01-01 signatures=0
X-Proofpoint-Spam-Reason: safe
Return-Path: [email protected]
X-OriginalArrivalTime: 04 Sep 2014 19:49:47.0046 (UTC) FILETIME=[61900460:01CFC879]A little more discovery...
From my smart host/SPAM filter audit folder, I could see the message was received with a 2 meg "winmail.dat" file. Yesterday, I had attempted redirecting the message to my own mailbox, and it bounced. I decided to try redirecting the message
to a 2010 mailbox, and the message arrived. It had 3 attachments, 1 Word doc, and 2 PDF files. So, this appears to be an encoding issue with the winmail.dat file. Any work arounds/reasons for winmail.dat from being rejected at the mailbox
server? Once it made it to a 2010 mailbox/client, I was able to forward to a 2003 mailbox no problem. -
Problems with the (WINDOWS 8 pro -64 BIT) IN THINKPAD L520 - 5016 RL2
I have some problems with the (WINDOWS 8 pro -64 BIT) is not working properly IN THINKPAD L520 - 5016 RL2.
1. Message appears telling me that the drivers of the display has been restored crash.
2. The mouse pointer moves very slowly sometimes, and sometimes does not move for a while.
3. Device software such as lenovo-airbag protection , lenovo-internet connection and lenovo web connection........ its is not compatible with the system, and do not work.
What is the solution؟Hi, MUJAHED
I have a few questions for clarification I would like to ask about your first two issues:
1) Can you copy the contents of this message and respond back with them. Any error codes or direct quotation from the system can really help in diagnosing a problem.
2) Does this only apply to the TrackPad, or does this behavior also occur with an external mouse? It may help to download the latest mouse drivers for your system, which can be found here.
As for your last issue with the Lenovo service not being compatible with the system: Unfortunately, software for these applications has not been released for Windows 8. Windows has its own network settings that you can use to connect to the Internet and networks, so that is still possible, though you may not enjoy it as much as Lenovo's program.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it. -
I cant cant use mail merge feature in Winword in conjunction with Abobe Acrobat 10 (pdfmaker add-in) after the recent Office April Windows and Office Updates.
Here is a quick note from the event viewer:
The program WINWORD.EXE version 14.0.7134.5000 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 1138
Start Time: 01d07dcede19c458
Termination Time: 15
Application Path: C:\Program (file:///C:/Program) Files (x86)\Microsoft Office\Office14\WINWORD.EXE
Report Id:
Microsoft Word: Accepted Safe Mode action : Word experienced a serious problem with the 'acrobat pdfmaker office com addin' add-in. If you have seen this message multiple times, you should disable
this add-in and check to see if an update is available. Do you want to disable this add-in?.
I do not wish to disable the pdfmaker add-in as I use it to run mail merge on WORD and send 10s and 1000s of pdfs via email to external users. I am not sure what are my options here and I wish
someone could help me get to the root cause of the matter.
My environment is as follows:
Windows 7 x64 SP1
Office 2010 v 14.0.7128.5000
Adobe Reader MUI X and Adobe Acrobat X
FerozeHi,
As the event log indicated, this is due to acrobat pdfmaker office com addin doesn't work well with Microsoft Word.
I would suggest you go ahead and try to upgrade your Adobe product to the latest version and see if issue persists.
Or contact the support of Adobe and see if there is a known compatibility issue or not.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Remote Resources: "A problem with the system proxy caused the connection to fail: End of file"
Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
The relevant log is the following:
[2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||ZWaveUtil
remote.workingdirectory
remote.name ZWave Adapter Utility
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost = 200.5.68.10
proxyPort = 8080
sessionId = -1
[2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
[2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
[2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
[2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
[2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username Administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=Administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 16:58:13] RDP (0): Not using any proxy
[2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
[2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 17:09:27] RDP (0): Not using any proxy
[2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be. -
Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help meWhat are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected] -
Problems with the fscommand("quit")
Hi,
I am experiencing Problems with the fscommand("quit"). I have tried adding the code to the button and to the timeline. Both works perfectly with the SWF and if published with CS4. However I am using a program called 'Flash EXE Builder' and this is where the problem comes in, all other button functions works perfectly just the quit.
The reason I am using 'Flash EXE Builder' is that it protects the exe file and puts a time limmit to it making it a shareware.
Is there another command I could try?
Please can someone help me?pagination for tables on Pages is not working properly... for 5.5 version... Any solution???
-
I'm having problems with the reproduction of documents in Adobe X due to low reproduction quality ¿c
I'm having problems with the reproduction of documents in Adobe X due to low reproduction quality ¿can you help me
Some things to try...
Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
If you cannot open Reader by itself, try to disable Protected Mode in the registry; download, unzip, then run the attached registry script
It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html -
Problems with the postal code in address iview ESS.
I would greatly appreciate if someone answer this threat. I am having this big problem with the address iview. It is not possible to change the postal code in the address iview.
Can you explain the issue? Means for which country this issue is coming. We faced similar issue. There is some bug in ESS/MSS package itself. You send me details of issue at [email protected] I will reply you back with OSS message answered by SAP if that is a bug.
-
I'm having problems with the plugin
It constantly asks me if i want to continue or stop the 'scrip'. Also, i'm having problems with the tabs constantly loading. Like I'm on a page, and then i found the page reloading itself when i'm looking at the page. I'd like to know how i can fix those problems i've reinstalling firefox, but that doesn't seem to work, i've tried reinstalling the plugin but that doesn't work either. I was wondering what version of the plugins does firefox use.
Here's an explanation of what those processes are.
Inside Flash Player Protected Mode for Firefox
I'm curious about what you did to uninstall just those. -
Problem with Mobile Gateway 1.0 Configuration
reffering to the config guide for mobile gateway 1.0 (https://websmp102.sap-ag.de/~sapdownload/011000358700000518422009E/Config_Guide_MGW_SP01_rev.pdf) we are facing some problems with the configuration in the DOE.
In Chapter 4.1.1.4 a SWCV "MAS_SMARTPHONE" is mentioned, which is not available in our System, though all other steps before have been successfully executed.
We are on SP08 and SWCV "SAP BASIS 7.10" is activated and generated.
Does anyone know a workaround?
Thanks in advancei think i located the problem in the DOE.
When a new device is registered (by user-login from device) some LUW's are listed in the SMQ2 for that Queue. Here several dumps occur:
--> 100 ABBTO RR014013005_DRFILLING_006 MMW_RR_RR014013005 05.11.2009 18:19:51 Syntax error in program
ZDOECL_013_005_STRWRPR==== 0A0A001710804AF2FB270034
0A0A001710804AF2FB270034 bgw23
--> 100 ABBTO RR014013002_DEPQ_SERVICE MMW_RR_RR014013002 05.11.2009 18:19:53 Syntax error in program
ZDOECL_013_002_STRWRPR==== 0A0A001710604AF2FB29000E
0A0A001710604AF2FB29000E bgw23
From ST22:
Error in the ABAP application program.
The current ABAP program "SAPLSMMW_STRWRAPPER_APIS" had to be interrupted
because it contains
a statement that cannot be executed.
In the include "ZDOECL_013_002_STRWRPR========CM001 " in the line 21 of program
"ZDOECL_013_002_STRWRPR========CP " the following syntax
errors occur:
"Field "INIT_FLAG" is unknown. It is neither in one of the specified ta"
"bles nor defined by a "DATA" statement. "DATA" statement." -
Photosmart 7520 error. there is a problem with the printer. turn printer off then on.
I have a photosmart 7520 experiencing the following issues.
Problem #1: Randomly all the lights start to blink off and on and the display reads the following :
Error . There is a problem with the printer. Turn printer off then on.
I cannot find any one action that triggers this to happen.
Problem #2: When the printer is turned on and idle, also at RANDOM times, the printer will "Ding" followed by the wireless light blinking. Then what sounds like the cartridges being cleaned, then a sound like the feeder spinning or the print head running full track from side to side, then ending with a "Ding" and then returning to normal.
When this occurs, the wireless connection is disconnected then reconnected. Also this Disables the "Scan to computer" function to all the computers on the network and requires manually re-enabling all .
From what I can tell the printer is restarting itself.
It is plugged directly into the wall outlet, no surge protector.
Tech support has already run me through the clean the print head steps, escalated me up the chain, and ultimately replaced the printer with a brand new one.
THE NEW PRINTER IS DOING ALL THE SAME THINGS AS THE PREVIOUS ONE.
This printer is connected wirelessly to a Netgear N900 router. My computers all running Windows 7, all are on the same network and workgroup and all are running Mcafee Total Protection.
If anyone is or has experienced the same or similar problems, I could sure use some help.
This question was solved.
View Solution.How did you fix this?
I replaced an HP printer recently for a new Photosmart 7520 after a complete ink container emptied into the printer.
The old printer sometimes had difficulties switching it on and the new printer has the same problem.
Also the wireless connection regulary drops and can only be reenabled by switching of the printer and switching it back on, only this sometimes takes more than ten minutes before a simple push on the power button is translated in a power on of the printer.
Since the previous printer also suffered from these "power" issues, I think the problems are power related, but I have to check this first before I can say anything more about this.
Maybe you are looking for
-
MDS error while deploying the application in 12c
Hi, I'm using JDeveloper - 12.1.2.0.0 I'm trying to deploy the application and encountered the following error: oracle.mds.config.MDSConfigurationException: MDS-01330: unable to load MDS configuration document MDS-01329: unable to load element "
-
I am trying to stop pages from being able to automatically reload. Sites such as Drudge Report and now Yahoo News anre reloading before I have a chance to read them and it confuses me due to a disability besides just being annoying. I have found the
-
Printing from a Galaxy S5 To a non wireless network printer
I have a Galaxy S5 smart phone... I would like to be able to print to my home network printer... I havea HP officejet Pro 8000 printer, non wireless, it is USB cabled to my PC runing Windows Home Pro.... I have a home network set up with a laptop tha
-
Playing Videos from iPhoto in any other player than Quicktime
Hi, is there any way to make iPhoto open video files in anything but Quicktime X. I'd prefer them all starting in VLC. Setting VLC as the default player for all .MPG files works when selecting the files in Finder, yet iPhoto will still try and start
-
Product experation date not appearing in Idoc
Hi, I have an EDI customer that is requesting the product expiration date on his ASN. The Idoc which I am using is 46C DELVRY03 with the message type: DESADV. There is a field available on the Idoc for this data but no matter how we configure we canu