Problem with the HORIZONTAL Scrollbar
Someone (I thanks him) has explain me how to have a horizontal scrollbar in a JTable (I use setHorizontalScrollBarPolicy(...)).
So, now I have my Horizontal scrollbar but ONLY de bar and NOT the "button" in the bar. So, I am not able to scroll (and for a scrollbar it looks stupid). I have tried also setHorizontalScrollBar(...) but that didn't change anything.
1. Try calling setEnabled(true); on the scrollbar
2. Check that you need to scroll. If efffectively the knob (as the API docs call it) is larger than the scrollbar, it probably won't be shown.
Similar Messages
-
Problem with datagrid horizontal scrollbar
Hi all,
I am facing problem with Datagrid HorizontalScrollBar.
As per requirement i need to seperate the Horizontal and verticalscroll bars from grid.
So what i did was, i created HScroll & VScroll components and associated them Datagrid scroll bars. I made HorizontalScrollPolicy and VerticalScrollPolicy "off" for datagrid.
As i binded values to HScroll & VScroll components which are out side of datagrid, i should be able to scroll datagrid using those components.
Its working fine for VScroll. When i scroll VScroll component am able to scroll datagrid vertically.
Problem is with HorizontalScrollPolicy in datagrid, when i change the policy to "on" i can see the scrollbar down to datagrid and able to scroll. once i change the policy to "off", datagrid columns are getting resized and datagrid width will set back to its container width without scrollbar, because of this there will be no HorizontalBar for datagrid to assiciate with HSCroll Component.
Code given below:
[AS]
private function vScrollGrid(event:ScrollEvent):void
mainTable.verticalScrollPosition=vScrollBar.scrollPosition;
private function hScrollGrid(event:ScrollEvent):void
mainTable.horizontalScrollPosition=hScrollBar.scrollPosition;
}[/AS]
[CODE]
<mx:HBox height="100%" verticalScrollPolicy="off" horizontalScrollPolicy="off">
<mx:DataGrid dataProvider="{reportData}"
id="mainTable"
height="100%"
width="100%"
textAlign="right" allowMultipleSelection="true" visible="false" verticalScrollPolicy="off" horizontalScrollPolicy="off"/>
<mx:VScrollBar id="vScrollBar" height="100%" pageSize="1" scrollPosition="{mainTable.verticalScrollPosition}" maxScrollPosition="{mainTable.maxVerticalScrollPosition}" scroll="vScrollGrid(event)"/>
</mx:HBox>
<mx:HScrollBar id="hScrollBar" height="100%" pageSize="1" scrollPosition="{mainTable.horizontalScrollPosition}" maxScrollPosition="{mainTable.maxHorizontalScrollPosition}" scroll="hScrollGrid(event)"/>
[/CODE]
Please help me to resolve this
Thanks & Regards
Pratap1. Try calling setEnabled(true); on the scrollbar
2. Check that you need to scroll. If efffectively the knob (as the API docs call it) is larger than the scrollbar, it probably won't be shown. -
Is someone with iMac 2010 users have problems with the monitor. I mean horizontal stripes and dark screen ?
Mine's a late '09, but there have been display issues with iMacs.
Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine. -
To disable the horizontal scrollbar and to create a next button to navigate
To disable the horizontal scrollbar and to create a next button to navigate through the records. At present I create a JSF page and drag and drop my table view and then using the Tuning property I have limited the number of records to be shown. But I need to add a button and then code it to display the next few records. Can someone kindly suggest a suitable mechanism to get this accomplished.
Edited by: 888970 on Oct 2, 2011 10:15 PMHi Erp,
At present these are the entries that I have in my JSPX page.
I have a Table, Iterator and a Input List of Values. As per the scenario, I want a few rows to appear on the table for which I wanted to disable the horizontal scroll bar and then once I click on the list of values it must prompt me with the remaining page numbers.
Earlier there are about 150 records in the table. I want to show them as 15 per page.
For which I have added the Iterator and a LOV component code in my JSPX page.
<af:iterator id="i1"
value="#{bindings.NsEventDetailsView1.collectionModel}"
var="row"
binding="#{pageFlowScope.testPageBean.myIterator}"/>
<af:inputListOfValues label="Label 1"
popupTitle="Search and Result Dialog" id="ilov1"/>
Then I created the bean class as per the example.
Below is the bean class:
import javax.faces.event.ValueChangeEvent;
import oracle.adf.view.rich.context.AdfFacesContext;
import org.apache.myfaces.trinidad.component.UIXIterator;
import org.apache.myfaces.trinidad.event.AttributeChangeEvent;
public class TestPagebean {
public TestPagebean() {
public void i1ov1_valueChangeListener(ValueChangeEvent valueChangeEvent) {
// Add event code here...
private UIXIterator myiter;
public void setI1(UIXIterator myiter) {
this.myiter=myiter;
public UIXIterator getmyiter() {
this.myiter=myiter;
public UIXIterator setmyiter() {
return myiter;
UIXIterator valueIterator = getmyiter();
if (!valueChangeEvent.getNewValue().equals(valueChangeEvent.getOldValue())) {
int newPage =
Integer.parseInt(valueChangeEvent.getNewValue().toString());
int pageStart = (newPage) * valueIterator.getRows();
valueIterator.setFirst(pageStart);
AdfFacesContext.getCurrentInstance().addPartialTarget(valueIterator);
But i am getting errors in the bean class.
1. Block expecting }
2. public UIXIterator getmyiter() {
this.myiter=myiter;
Return Statement missing
3. Block expecting {
4. Type or variable 'valueChangeEvent' not found
5. Method 'getNewValue' not found
6. Method 'getOldValue' not found
7. Method 'toString' not found
Can you suggest a possible solution? -
The horizontal scrollbar on the timeline in Premiere Pro 5.5 has disappeared.
The horizontal scrollbar on the timeline in Premiere Pro 5.5 has disappeared.
Restart computer, hold down alt+shift while opening Premiere until welcome screen.
See if that will help.
Otherwise reinstall and use cleanertool
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
Anyone have a problem with the iPhone 6 freezing when you're trying to send a text?
I seem to be having a couple of problems with the iPhone 6 or possibly the update 8.1.2. Sometimes when I turn the phone horizontally to text, nothing happens and it only works if I turn it back vertically. Also, sometimes when I receive a call from someone who is already on my contact list, only the number shows up and not the name or picture connected with that contact. It appears when I answer, but sometimes I don't want to answer if I don't recognize the number.
Anyone else having these issues? Do we need another update to the software to fix these problems?How much available storage do you have on your iPhone? You can find this at Settings>General>Usage
If your available space is measured in megabytes (MB) then it is causing problems for your phone's operating system.
If your available space is measured in gigabytes (GB) then that isn't the source of the problems and you can move to some other troubleshooting steps. First, try a simple restart (holding the sleep wake button for about 5 seconds until the power off slider appears).
If the problems reoccur after you've restarted the phone, I recommend Reset All Settings, which is located in Settings>General>Reset -
Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?
The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.) -
I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.
Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?
-
I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again! -
Having Problems With The Neo2 ? Read This!!!!
Hi,
i just bought a neo2 motherboard, with a p4 2,6 HT and 512 mb Kingston hyper ram ( 2 peaces of 256, else it won't use the dual bandwith :D)
In the beginning everything seemed fine, until i got some sudden reboots and other vague stuff. I read it could be the SB audigy messing things up. I removed the card and windows Xp pro runs fine now. no more sudden reboots or explorer not resonding crashes.
But, i still had problems with games crashing. I got reboots. After i set the "automatic reboot after crash" to false, i got blue screens or lock-ups in my games.
I wondered what it could be. Then i started to put my videocard ( a radeon 9700 pro 128 mb) in agp 4x mode instead of agp 8x! Now my games run without crashes, but benchmarks are not that high. 4780 marks with 3dmark 2003.
I think i will send msi and Ati a mail concerning this problem. I don't know if it is PSU related. Maybe the videocard demands a little more power in agp 8x mode.
Well, having probs with you're NEO2 ??
remove the sb Audigy and turn the agp back to 4 using smartgart ( it's located in you're display settings screen ).
First i tought it was a PSU related problem, because i swapped my 350 Watt enermax with a Q-tec 400 watt psu. The 400 watt PSU died while i was gaming. Maybe the enermax is the better PSU :D So, it could still be a PSU related problem. Maybe the agp 8x settings demands a lot more from you're psu. Anyway, i'll receive a 550 watt Antec PSU soon, so i can check this out....
Btw. I cant run the motherboard in anything better than "slow" mode. In all other modes Xp won't boot. I haven't tryed it since the AGP is at 4X, but i don't think it will matter.
Regards,
Welcome to the real world NEO :DOk.....
i raised the memory voltage setting in the bios from 2.65 to 2.8 and the agp voltage from 1.5 to 1.7
Everything seems fine, but games crash back to the desktop now without an error message or the either lockup.
Whatever i do, i can't make the mobo crash in anything but games!
Btw. the following message caught my attention, when i ran f1 2002 with directx 8.1. Since i have directx 9, i haven't seen it anymore. Maybe because the ati-drivers are made for directx 9....
// Watchdog Event Log File
LogType: Watchdog
Created: 2003-10-04 02:02:53
TimeZone: -60 - West-Europa (standaardtijd)
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 9
Shutdown: 0
EaRecovery: 1
EventCount: 2
BreakCount: 2
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: ati2dvag
EventFlag: 1
DeviceClass: Display
DeviceDescription: RADEON 9700 PRO
HardwareID: PCI\VEN_1002&DEV_4E44&SUBSYS_00021002&REV_00
Manufacturer: ATI Technologies Inc.
DriverFixedFileInfo: FEEF04BD 00010000 0006000E 000A18EA 0006000E 000A18EA 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: ATI Technologies Inc.
DriverFileDescription: ATI Radeon WindowsNT Display Driver
DriverFileVersion: 6.14.10.6378
DriverInternalName: ati2dvag.dll
DriverLegalCopyright: Copyright (C) 1998-2002 ATI Technologies Inc.
DriverOriginalFilename: ati2dvag.dll
DriverProductName: ATI Radeon Family
DriverProductVersion: 5.2.3790.2
I wish i had another videocard to test. My radeon 9700 pro is getting suspicious...
Regards,
The real world -
Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.
This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck
-
I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html -
I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailableAlso if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.
-
Problems with the O2 blackberry data package on my Curve 3G.
I have already informed O2 about this but they claim that I should be used the blackberry support services, but nothing there helps me!
I got my Blackberry Curve 3G on September 9th this year and I put on the Blackberry Data Package bolt-on onto my phone on September 16th. I then received a text to say they've taken £5 from my credit and it will be up and running in the next 24 hours. Its now September 19th and my BBM is not working at all and I am extremely upset with the services and behaviour I have received from both O2 and Blackberry.
Is there any way you can help? If this fails, I shall be forced to go back to the shop from where I got my Blackberry from and ask for their help.
Many thanks, Jade.Can a bubble whistle Problems with the O2 blackberry data package on my Curve 3G.? The seat matures in your oar. The lad ices the pursuing method inside a resident. A judge spins against the vendor! The rose wows the hello.
filipina heart
Maybe you are looking for
-
I went I to my phone and I tried to unlock my passcode but it did not let me in, how can I reset my lock passcode without plugging it onto the computer on iTunes, or restoring it or deleting any data ?
-
Hi, In TestStand
-
Exception when recompiling during application run (ctrl+shift+f9) in jdev 11.1.2.4
Hello, We just moved to 11.1.2.4 and when I make a small change to a java managed bean class and press ctrl+shift+f9 (which worked on other version of 11g), I get many excpetions. This the exception from a very simple test case I created ( It has a b
-
The FAQ says that you can create a link to both a thread and a message using tags. I just right clicked on a thread title, clicked "Copy Link Location", pasted and saw a url with a messageID. But if I wanted to use the {thread} tag, what id do I use?
-
What do you call it when there is a scroll bar in the middle of your page?
Hi, I have a few pages that have four paragrapghs of text. I don't want the over all dimensions of my page to change so I want to have a window within my page that will have a scroll bar allowing the visitor to scroll throught the text without having