Problem with the n73-urgent!!

I cannot make/receive any phone calls, 'cause the person on the other side of the line doesn't hear anything I say. I'm sure its not a big problem, but I can't find the solution. Can anyone help? Its pretty urgent! Thanks!

It's either a software fault or hardware failure.
Backup everthing you want to keep then download and install the nokia software updater:
http://www.nokia.co.uk/A4226014
If this doesn't fix it then you will need to visit a nokia care point.
Care points:
UK
http://www.nokia.co.uk/A4228006
Europe:
http://europe.nokia.com/A4388379
Elsewhere:
http://www.nokia.com and select your country.

Similar Messages

Problems with the Strings Urgent Help needed

I have a unique problem. I have to retrieve a particular value from a String. I tried using String tokeniser but in vain. I cannot use java.util.regex package to match the expressions as the version of java on the client m/c is 1.1.8 and they are not ready to upgrade the same.
The string From which I have is a very long one running into more than 100 lines which can vary from case to case all I know is to retrieve the value which is just in front of "TestValue" which occur only once in the String Can Anybody suggest a bettter alternative.
Thanx.
ebistrio

StringTokenize on TestValueHow would you suggest that was done?
As I understand it StringTokenizer tokens = new StringTokenizer(string, "TestValue"); would not tokenize on the string "TestValue" but on any of the characters 'T', 'e', 's', 't', 'V', 'a', 'l' or 'u'. This is a common java pitfall in my opinion due to bady named parameters (I feel it should be called "delims" not "delim") or in other people's opinion due to bad parameter type (should be a char[] not a string).
A clearer explanation of the problem would help.

I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I c

I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I can do to repair it

Please authorize ADE 3 with same credentials that you used with older version of ADE

N73 problem with the usb cable

so, i have a problem with the connectivity of my usb
when i plug the cable to my pc or any pc it said "USB device Not Recognize"
this happen since i use my headset often than before, is that take effect?
or when i use card reader to transfer all file from my phone to pc, the card reader can't read the memory card.
so is there anyone know how to solved it?
i dont want to take my phone to Nokia Care, i dont believe Nokia Care in my town.

It looks like your memory card is corrupted. Reformat the card. Did you try another USB port?
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Very urgent!! Problems with the H.263 codec on JMStudio

I downloaded the JMF Version 2.1.1e ' version.
The H.263 codec doesn't work.
I noticed that the file sound.jar wasn't in the lib directory of JMF-2.1.1e.
Is for this reason I have problems with the H.263 codec??
Thanks for your help.

What do you try to broadcast? H263 is a video codec, not audio..

URGENT!!! Problems with the last version 14.2.1

Hello, I have a problem with the latest update of PS CC two iMac in the company where I work, is that updated to the latest version and have recurring problems, for example, when using the Transform an object tool, the object changes, shown with noise or change the opacity and you can not edit, or also adding some other effect is the result: a distorted image. I think that's the latest update of PS because I have no such problems, because even I do not upgrade to version 14.2.1. Please I need your help, as our work at the agency is compromised with the delays that this causes us. Greetings and thanks! I'll be waiting for an answer.

Lo siento mucho, aquí va el problema en español:
Buenos días, tengo un problema con la última actualización de PS CC en dos iMac en la empresa donde trabajo, resulta que actualizaron a la última versión y tienen problemas recurrentes, por ejemplo: al utilizar la herramienta Transformar en un objeto, éste objeto cambia, se muestra con ruido o cambia la opacidad y no es posible editarlo, o también agregando algún efecto el resultado es otro: una imagen distorsionada. Creo que es por la última actualización de PS ya que yo no tengo esos problemas, porque aún no actualizo a la versión 14.2.1. Por favor necesito su ayuda, ya que nuestro trabajo en la agencia se ve comprometido con los retrasos que esto nos ocasiona. Saludos y gracias! Estaré a la espera de una respuesta.
Muchas gracias!!!

Facing lot of problems with the DATA object -- Urgent

Hi,
I am facing lot of problems with the data object in VC.
1. I created the RFC initially and then imported the data object in to VC. Later i did some modifications to RFC Function module,and when i reload the data object, I am not able to see the new changes done to RFC in VC.
2. Even if i delete the function module, after redeploying the IVIew, results are getting displayed.
3. How stable is the VC?
I restarted the sql server and portal connection to R3 is also made afresh.... still i am viewing such surprise results..
please let me know what might be the problem.

Hi Lior,
Are u aware of this problem.
If yes, please let me know...
Thanks,
Manjunatha.T.S

Charm: BP problem with the user

Hi!
I have problem with the user for the usage of ChaRM.
When I try to set the the (urgent) correction in Development i get the following error.
There is no valid business partner assigned to your user.
Meanwhile the appropriate BP-entry for the user exists:
External BP number: <SID> <CLNT> <user name>
Identification number: <SID> <installation number> <user name>
Furthermore I have the following error, when I try to approve the change request:
Partner 141 (Change-Manager) is neither an employee nor an organizational unit
I would be great to get some help here.
Thank you
regards
Thom

Hi Thomm,
1. There is no valid business partner assigned to your user.
In BP under identification tab,
ID type idenification number
CRM001 <SID> <installation number><CLNT><username>
2.Partner 141 (Change-Manager) is neither an employee nor an organizational unit
Assign the BP role as "Employee" for Change Manager
regards
Naveen

[Castor] Problem with the namespace

Hello,
I'm using Castor for generate XML file with Java Object(generate with Castor with XSD).
I have a problem with the syntax and particulary with the reference of the namespace.
I obtain this :
<?xml version="1.0" encoding="UTF-8"?>
<TEST ID="">
<ns1:PERSON xmlns:ns1="http://www.w3.org/a/">
<ns1:CALCUL>
<ns1:SOURCE>RED</ns1:SOURCE>
<ns1:TIMESTAMP>2004-10-27-11.38.25.237113</ns1:TIMESTAMP>
</ns1:CALCUL>
<SIREN>666</SIREN>
<ns1:DOSSIER>
<ns1:TYPE>DN</ns1:TYPE>
<ns1:IDENTIFIANT>333</ns1:IDENTIFIANT>
</ns1:DOSSIER>
</ns1:PERSON>
<ENTITY>
<COMMON>
<ns2:ENTITY_ID xmlns:ns2="http://www.w3.org/a/">602449226</ns2:ENTITY_ID>
<ns3:RATING xmlns:ns3="http://www.w3.org/a/">NDE</ns3:RATING>
</COMMON>
<SPECIFICS_DATA>
<ns4:RATING_FC xmlns:ns4="http://www.w3.org/a/">2-</ns4:RATING_FC>
</SPECIFICS_DATA>
</ENTITY>
</TEST>
but I'd like to obtain :
<TEST ID="">
<PERSON >
<CALCUL>
<nSOURCE>RED</SOURCE>
<TIMESTAMP>2004-10-27-11.38.25.237113</TIMESTAMP>
</CALCUL>
<SIREN>666</SIREN>
<nDOSSIER>
<TYPE>DN</TYPE>
<IDENTIFIANT>333</IDENTIFIANT>
</DOSSIER>
</PERSON>
<ENTITY>
<COMMON>
<ENTITY_ID >602449226</ENTITY_ID>
<RATING>NDE</RATING>
</COMMON>
<SPECIFICS_DATA>
<RATING_FC >2-</RATING_FC>
</SPECIFICS_DATA>
</ENTITY>
</TEST>
"http://www.w3.org/a/" is the namespace reference in the xsd, here the begin of the xsd:
<xs:schema xmlns:FIN_Referential="http://www.w3.org/c/" xmlns:Rating_Referential="http://www.w3.org/f/" xmlns:Global_Referential="http://www.w3.org/a/" xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" attributeFormDefault="unqualified">
To marshall I use this code :
StringWriter fluxXmlSw = new StringWriter() ;
Marshaller mar = new Marshaller(fluxXmlSw);
mar.marshal(Test(),fluxXmlSw);
//Test() is the root element of the file xml
I hope somebody could help me, it's urgent I solve this problem.
Thanks for all responses

just a thought..... did u try removing xmlns:p1="http://ofcom.co.uk/unify/CustomerMaster" from your WSDL file ?
Try to remove that and proceed in your development.

Hola i have a problem with the dowland of adobe, say fault 1 help me please

hola i have a problem with the dowland of adobe , say fault 1, hepl me please, urgent, than you

Please post only one message... I deleted your duplicate
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)" more........ .

Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I can not upgrade to quicktime 7.7.3 for windows vista. Error message says there is a problem with the program installer. Any clue as to how to get around this.

I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?

The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

Having Problems With The Neo2 ? Read This!!!!

Hi,
i just bought a neo2 motherboard, with a p4 2,6 HT and 512 mb Kingston hyper ram ( 2 peaces of 256, else it won't use the dual bandwith :D)
In the beginning everything seemed fine, until i got some sudden reboots and other vague stuff. I read it could be the SB audigy messing things up. I removed the card and windows Xp pro runs fine now. no more sudden reboots or explorer not resonding crashes.
But, i still had problems with games crashing. I got reboots. After i set the "automatic reboot after crash" to false, i got blue screens or lock-ups in my games.
I wondered what it could be. Then i started to put my videocard ( a radeon 9700 pro 128 mb) in agp 4x mode instead of agp 8x! Now my games run without crashes, but benchmarks are not that high. 4780 marks with 3dmark 2003.
I think i will send msi and Ati a mail concerning this problem. I don't know if it is PSU related. Maybe the videocard demands a little more power in agp 8x mode.
Well, having probs with you're NEO2 ??
remove the sb Audigy and turn the agp back to 4 using smartgart ( it's located in you're display settings screen ).
First i tought it was a PSU related problem, because i swapped my 350 Watt enermax with a Q-tec 400 watt psu. The 400 watt PSU died while i was gaming. Maybe the enermax is the better PSU :D So, it could still be a PSU related problem. Maybe the agp 8x settings demands a lot more from you're psu. Anyway, i'll receive a 550 watt Antec PSU soon, so i can check this out....
Btw. I cant run the motherboard in anything better than "slow" mode. In all other modes Xp won't boot. I haven't tryed it since the AGP is at 4X, but i don't think it will matter.
Regards,
Welcome to the real world NEO :D

Ok.....
i raised the memory voltage setting in the bios from 2.65 to 2.8 and the agp voltage from 1.5 to 1.7
Everything seems fine, but games crash back to the desktop now without an error message or the either lockup.
Whatever i do, i can't make the mobo crash in anything but games!
Btw. the following message caught my attention, when i ran f1 2002 with directx 8.1. Since i have directx 9, i haven't seen it anymore. Maybe because the ati-drivers are made for directx 9....
// Watchdog Event Log File
LogType: Watchdog
Created: 2003-10-04 02:02:53
TimeZone: -60 - West-Europa (standaardtijd)
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 9
Shutdown: 0
EaRecovery: 1
EventCount: 2
BreakCount: 2
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: ati2dvag
EventFlag: 1
DeviceClass: Display
DeviceDescription: RADEON 9700 PRO
HardwareID: PCI\VEN_1002&DEV_4E44&SUBSYS_00021002&REV_00
Manufacturer: ATI Technologies Inc.
DriverFixedFileInfo: FEEF04BD 00010000 0006000E 000A18EA 0006000E 000A18EA 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: ATI Technologies Inc.
DriverFileDescription: ATI Radeon WindowsNT Display Driver
DriverFileVersion: 6.14.10.6378
DriverInternalName: ati2dvag.dll
DriverLegalCopyright: Copyright (C) 1998-2002 ATI Technologies Inc.
DriverOriginalFilename: ati2dvag.dll
DriverProductName: ATI Radeon Family
DriverProductVersion: 5.2.3790.2
I wish i had another videocard to test. My radeon 9700 pro is getting suspicious...
Regards,
The real world

Problem with the n73-urgent!!

Similar Messages

Maybe you are looking for