Problem with the nano in the CAR... please helpppp..

hey, i have a problem when im charging with the 12 volts adapter and hearing music at the same time, i hear a buzz sound while i am charging, if im not i hear it good, the sound feels like energy passing trrough the nano, whats the problem ?????
compaq x1000   Windows XP  

ummm im guessing you are using the tape/ cassette for it to play ...if so thats normal...

Similar Messages

  • Problem with zen-nano-plus!! please help

    i have the zen-nano-plus 52mb. and i try to update the firmware with latest version but i don't delete the music files in it.
    i have started the instalation and the program asked me to delete the files on zen. (i didn't care keeping the files, so i continue the instalation)
    when the program began to delete the files, after in few seconds i received an error messege from windowsoperating system reported error. the limit time on semaphore it's over.) now i have an 0.00.00 firmware version and i can't use the zen-nano because it's not starting. i have tried with the recovery tool but same situation it happend again. please help me if anybody knows something!!!!

    Go to Creative.com and click the Support link. Look for the firmware driver for your Zen Nano and follow the directions. I had to do this to fix my Zen Nano Plus, because it had the exact same problem that yours had.
    Good luck!

  • Hello , please am having a problem with my iphone 5 , the battery runs out quickly , also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out , and my final problem is that is "no service " appears a lot can you help ?

    Hello , please am having a problem with my iphone 5 , the battery runs out quickly ,another problem also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out . My final problem is that  "no service " appears a lot  especially when opening wifi or 3G , can you help ?

    Your battery is running quickly because your cellular data connection is weak.
    Is your phone carrier a supported carrier:   Wireless carrier support and features for iPhone in the United States and Canada - Apple Support
    For your no service issues:  If you see No Service in the status bar of your iPhone or iPad - Apple Support

  • TS1559 I have problem with my iPhone 4s, the problem is i can't turn on wifi, when i go to the setting then to the general and then to the about, i see there is wifi address for my iPhone but still i can't turn it on, please help me

    I have problem with my iPhone 4s, the problem is i can't turn on wifi, though i have wifi address in my iPhone setting when i go to the general then about option, i tryed many options like turning of iPhone in airplan mode, reset options, but still the same, its gray button of wifi, please help me.

    Hello Pllumb,
    It sounds like you are unable to turn on Wi-Fi because the option is grayed out in Settings. Use these steps from the following article named:
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    Restart your iOS device.
    Make sure that airplane mode is off by tapping Settings > Airplane Mode.
    Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
    This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
    Make sure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
    If you still can't turn Wi-Fi on, please contact Apple for support and service options. If you can turn Wi-Fi on but are experiencing other issues with Wi-Fi, please see these steps.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Hello to everyone, I have a problem with my iPhone 5, the dynimic doesn't work... i didn't drop it and didn't contact with water... so should I do? please help me =(  P.S. may be I wrote with some mistakes, so I apologyze for it

    hello to everyone, I have a problem with my iPhone 5, the dynimic doesn't work... I didn't drop it and didn't contact with water...
    so what should I do? please help me =( 
    P.S. may be I wrote with some mistakes, so I apologyze for it

    Hello darkhanfromaktobe,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Have a nice day,
    Mario

  • Has anyone else had a problem with their nano sim slot bending snapping or breaking when they put their sim in!? I have had to order a replacement and only had the phone 5hours!

    Has anyone else had a problem with their nano sim slot bending snapping or breaking when they put their sim in!? I have had to order a replacement and only had the phone 5hours!

    Hannahjadepurnell wrote:
    From giffgaff.
    i Don't actually mean when you put it In the phone. I mean when you try to take the slot out of the phone with the pin. As soon as I pulled it out it bent.
    That makes less sense as the sim tray a fairly stiff metal and should be pulled straight out once released. You didn't answer the question about where is was bought. Is is a real iPhone?

  • I have a problem with nokia c700 (forget the secur...

    I have a problem with nokia c700 (forget the security code). I can't open my phone and can't check my imei... bored. Please help me restore my security code. Thank you so much.
    Life is fun!

    There is no other way than to get it reset thru' Nokia Care . A proof of ownership (Bill / Invoice) may be asked ...

  • Problem with iWeb 09, after the publication in a local file.

    *Subject: problem with iWeb 09, after the publication in a local file, i can't see my blog, nor my photos, but before that all was working fine.*
    After the publication in the local file, I see all my pages, but there is a mistake on the page "Blog" where I just can see the top of my page, it's cut and I can't see it entirely, so I can't see the inputs while I should see 3 news or 3 inputs. And it's the same for the "Photos" page where the page is cut, I can't see the photos, and it's just written : "Put the slide show and subscribe".To finish, when I want to activate the comments, it doesn't work neither.
    Please help me.

    I want to activate the comments, it doesn't work neither.
    The comments feature is only available when you publish to the MobileMe server, so I don't think you can use it when you publish to a local file.

  • I have a 13.5 month old Ipad2, wifi only that has had problems with wifi com from the beginning. I am learning that this is not unusual for apple. Any suggestions?

    I have a 13.5 month old Ipad2, wifi only that has had problems with wifi com from the beginning. I am learning that this is not unusual for apple. Any suggestions?
    ronald1094

    Try #5.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • The problem with GT 630M in the laptop GT580 20150

    The problem with GT 630M in the laptop GT580 20150
    After updating the BIOS in Windows 8, and install windows 8 has stopped working NVIDIA graphics card
    message:
    System Windows stopped this device because it has reported a problem occurs. (Code 43)
    Tried different driver from 310.?? to 321.??
    After installing the driver card is working properly. After the first reboot card stops working.
    Help solve the problem!
    Please!

    The problem with GT 630M in the laptop GT580 20150
    After updating the BIOS in Windows 8, and install windows 8 has stopped working NVIDIA graphics card
    message:
    System Windows stopped this device because it has reported a problem occurs. (Code 43)
    Tried different driver from 310.?? to 321.??
    After installing the driver card is working properly. After the first reboot card stops working.
    Help solve the problem!
    Please!

  • Hi there, I have a problem with my iphone3g. The '*', '0' and '

    Hi there, I have a problem with my iphone3g. The '*', '0' and '#' dont work on the keypad when i try to umlock my phone? When I swipe across the screen its fine, but when I try to enter passcode, it wont let me as the passcode has a '0' in it =/ this happened out of the blue and dont know what could have caused it to happen?? Can anybody help me please?

    Try restarting your phone while you hold down the power AND the sleep button at the same time.
    This defenitly is a software bug and normally there should be this button.

  • I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11:  the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, howev

    I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11:  the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, however the arrows will move it OK.  Also I cannot drag the selection to another photo in the photo bin as before.

    Hi,
    Please refer: http://helpx.adobe.com/photoshop-elements/kb/pse-stops-responding-yosemite.html
    Thanks,
    Anwesha

  • Problems with "no color" in the "Fill and Stroke"

    I am having problems with “no color” in the “Fill and Stroke” function of Flash CS4 Pro.
    I had been using CS4 for 10 days and everything worked fine. Then I tried experimenting with various color combinations (along with “no color”) for “Fill and Stroke” for a simple button. Suddenly CS4 locked up on me while I was working with the “color panel”. A second color panel appeared in the upper left corner and the program was not responding. All I could do was to end the CS4 task.
    After that, whenever I created even a simple rectangle, at first the colors would appear as indicated for “Fill and Stroke”, but when I selected the object to see its properties, either the stroke or the fill color box would have a red slash line, indicating a “no color”, and I couldn’t select the color box to change it using the ink bottle tool, although the other box worked fine.
    Rebooting did not help. So I uninstalled CS4 (and didn’t keep the preferences), rebooted, then reinstalled it. The problem was still there. Logging on as another user didn’t help. I tried restoring the Windows system to before I installed CS4 and resinstalling it and that didn’t work. I have a disfunctional CS4 now and I don’t know what to do to fix it. Please help me. Thank you.

    Have you updated flash to 10.0.2?  Have you played around with a bunch of different selections, objects, and so forth to see if this box is always incorrect?  I think there's some particular selection (order of selecting things, and so on), where the color swatches in one location don't work as expected. However, it should not happen all the time and from what I recall it was fairly easy to work around (I can't even figure out what this was - so probably not it, as it seems hard to run into or perhaps now fixed).
    Also make sure you have the stroke selected - if you don't have everything selected, either the fill or stroke will show no color and dim depending on the selection.

  • Having problem with my app on the Iphone 4

    i recently buy an iphone 4 but lately i been having problem with all app on the iphone i can't enter app store, facebook, tweeter etc and when i try to log off my account it actually don't let me log off i even do a recent to the iphone 4 and yet not letting me do a thing!

    some help please!

  • I have problem with my iPhone 4s, the problem is i can't turn on wifi, though i have wifi address in my iPhone setting when i go to the general then about option, i tryed many options like turning of iPhone in airplan mode, reset options, but still the s

    I have problem with my iPhone 4s, the problem is i can't turn on wifi, though i have wifi address in my iPhone setting when i go to the general then about option, i tryed many options like turning of iPhone in airplan mode, reset options, but still the same, its gray button of wifi, please help me.

    Hello Pllumb,
    It sounds like you are unable to turn on Wi-Fi because the option is grayed out in Settings. Use these steps from the following article named:
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    Restart your iOS device.
    Make sure that airplane mode is off by tapping Settings > Airplane Mode.
    Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
    This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
    Make sure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
    If you still can't turn Wi-Fi on, please contact Apple for support and service options. If you can turn Wi-Fi on but are experiencing other issues with Wi-Fi, please see these steps.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

Maybe you are looking for

  • How to get music off my ipod into my itunes

    My computer crashed and i had to reinstall itunes on it. i have lost all my music and need to pull the music off of the ipod. how do i do this

  • Adobe Muse insert or delete topics

    Just a question for a beginner user of Muse: I create a page with 4 topic (with text and image) is it possible to insert or delete one of these topics in" in-browse edit" modality

  • [SOLVED] eth0-wlan0 AP using bridge AND keep internet access

    Hi there! This is my very first post here, so please forgive me if I (unintentionally) violate some rule. I have set up my system as an eth0-wlan0 access point with hostapd using a bridge. The IP addresses are provided by a separate dhcp-server (rout

  • Export/compressor glitch

    Dear Motion Users, I've barely dabbled in Motion before, so the project I just started has already tripled my Motion experience. I started with a template, which was HD only, except I'm bringing this into DVDSP so I wanted a SD downconvert. I managed

  • Question about 'hosts: cluster' entry in /etc/nsswitch.conf

    Hi~ my system have "hosts: cluster files dns" entry in /etc/nsswitch.conf. I know 'files' to see the '/etc/hosts'. I want to know that 'cluster' to see 'what file'. Thanks,