Problem with the network (streaming-mirroring)

Hello guys, im really new in this whole posting my questions so hopefully im doing it right.
I have a Apple Tv 2nd gen and it was working like magic untill i changed my network.
I used to have severall routers which meant several networks (more or less) but when i bought the new equipmens I had the great idea to have only one router (Linksys N6500) and a access point that i used as a repeater (TPlink TL-wa901nd) the network works great for the AppleTV and the computers but when i try to mirror or stream any content my computer says that the AppleTV does not exist in the network some times and others it does but when i try to stream it, dissapears.
My guess is that the AppleTV and the computer are connecting to different access points (computer to router - Apple Tv to AP or reverse) and therefore not finding eachother, and i have been trying everything to make them encounter eachother and then stay like that (they miss eachother alot ).
Any opinions
Thanks in advance...

Connecting to different base stations shouldn't be a problem providing your network only has one DHCP server. Have you set your second router up in bridge mode.

Similar Messages

I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

Hello, Toro Silva.
Thank you for visiting Apple Support Communities.
The steps in the section labeled Unable to activate FaceTime or iMessage with phone number and Apple ID after waiting 24 hours (iPhone only) of the article below, should help resolve the issue. Make sure to create a current backup prior to processing these steps.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Cheers,
Jason H

Is there problems with the network/signal in TA3 Taunton area

Is there problems with the network/signal in the TA3 Taunton area I have not had a signal all day and then to make contact with one of my children regarding school pick up.

Unfortunately so. Spoke to EE today and the service may take up to 72 hours to get back to normal - which is unbelievable given how much we use our phones for day to day life! As they cannot do anything for us, to thank us for our patience they are asking us to monitor when the service resumes and get back to them (no doubt on their £ per min line) and let them know and they’ll credit us for the down time. Just Brilliant!!

The problem with the network card.

The problem with the network card.
My laptop HP Pavilion dv7-1260ew network connection breaks .
NIC is to blame .
On that card could replace the old Intel 5100 to work with the network as a standard N.

Pawełek wrote:
The problem with the network card.
My laptop HP Pavilion dv7-1260ew network connection breaks .
NIC is to blame .
On that card could replace the old Intel 5100 to work with the network as a standard N.
This confusing which one are you asking about?
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Lion: big problems with the network!

Since updating to Lion, I am experiencing difficulties with the network. My Kyocera task alfa 2500 cannot communicate properly with the Mac: it does print but cannot send scan to the Mac, it is just impossible for the printer/scanner to find the Mac. I hear it could be a problem with FTP which is not supported by the new OS Lion. How can I solve the problem?? Or is Apple going to resolve this problem????

Well, the problem relates to the Rosetta program eliminated by Apple in the Lion OS. When you try to rum the KM Scan to Mac.app you get:
"You can't open the application KM Scan to
Mac.app because PowerPC applications
are no longer supported."
So, I guess we (I encountered the same problem) will either have to wait out Kyocera-Mita for a scanner driver app, attempt write a new KM Scan to Mac.app for the Intel Macs; wait for somebody else to WRITE a new KM Scan to Mac.app for Intel Macs or just ***** about it.
Not a rosey situation.

The network backup disk could not be accessed because there was a problem with the network username or password.

Hardware Information:
          MacBook Pro - model: MacBookPro6,2
          1 2.66 GHz Intel Core i7 CPU: 2 cores
          4 GB RAM
Video Information:
          NVIDIA GeForce GT 330M - VRAM: 512 MB
          Intel HD Graphics - VRAM: 288 MB
Startup Items:
          HP Trap Monitor - Path: /Library/StartupItems/HP Trap Monitor
System Software:
          Mac OS X 10.6.8 (10K549) - Uptime: up 0:0:48:37
Disk Information:
          TOSHIBA MK5055GSXF disk0 : (465.76 GB)
                    (null) (disk0s1) <not mounted>: 200 MB
MacBook Pro HD (disk0s2) /: 465.44 GB (440.47 GB free)
          MATSHITADVD-R   UJ-898
Have tried…
re-setting Time Capsule (soft and hard) and power disconnect
re-setting modem
changing passwords in all relative locations
deleteing file://localhost/Library/Preferences/com.apple.TimeMachine.plist
deleteing all mention of Time Capsule in Keychain Access
running KeyChain First Aid (no problem found)
Restarting computer
Time Capsule has a green light, other MacBook Pro backs up OK but this machine continues to receive above error message and will not Enter Time Machine producing the error message Your Time Machine backup disk can’t be found. Maybe I need to do something over or in a particular order? All help is appreciated!

With the TC plugged by ethernet into the computer.. still in full isolation to the network and with factory reset.. you can do another to be sure.
Please open the network preferences.. and check the IP the ethernet is getting from the TC.
It should be 10.0.1.2
I set it to this manually
Don't worry about all the rest.
If you open airport utility can it see the TC?
YES
If not then I think you have a major network issue on the computer.
Assuming you can see the TC in airport utility.. go to manual setup and the disk tab. Does the disk register any issues.. SMART should show it has verified.
Shows verified
Now go to finder..
Mount the drive manually via the top menu.. Go.. Connect to server.
And type in the address.. SMB://10.0.1.1
Did NOT work, however 10.0.1.2 did
That should discover the drive and ask you for credentials which after a factory reset will just be public as the password. The drive should mount and you can then see it in finder.
Yes, but I have been able to do this with the IP address being set automatically
I would deliberately use SMB. The other alternative is AFP://10.0.1.1 but that seems to be more problematic at times..
Once mounted point TM to the drive and see if it can find it and start the backup.. if it fails I think you have need to use the A5 in pondini's troubleshooting and see what you can do.
It failed and A5 makes NO difference.
A drive that won't mount is obviously not going to work.
Pondini is welcome to make comments... sometimes my Mac terminology gets a bit loose.. !! My recent convert status is visible .. !!
My other solutions.. since these are fairly old products.. the TC is more than 3years in all likelihood so outside warranty.. get a USB drive and plug it into the Mac and use TM to backup to that. If that works.. I would erase the hard disk in the TC and start over with both computers.. you will need to backup the other computer before you erase of course. Erasing and starting over does seem to help.
If there are no other suggestions, I guess I will try erasing and starting over. Thank you both for ALL your advice.

A problem with the network adapter, help please

I have an hp touchsmart pc 600 1040uk and today i woke up to find that the network adapter (nVIDIA) dissapeared and no local area connection. Also i can not connect to the wireless network
I tried everything starting by restarting my router then removing all the cables and retarting the pc. Also tried adding a new device and everything didnt work. I even restored the pc to the factory settings and after starting over new still there is no local area network, just the wireless and bluetooth adapters and the wireless did not connect
Another problem is that when i restored the pc to factory settings the recovery program asked me to backup my pc and I did the backup and saved it in an external hard disk, and now I cant restore that back coz it dosent appear in the window of backups to restore
Plllllllllllllllllllllllllllllllllllllllllease help me, thanks

I found this on another post by "Scott", and it worked.
http://support.apple.com/kb/TS2048?viewlocale=en_US
Sure did take some searching to get to the answer.

Problem with the network

sorry for my inglish :oops:
1.- i install the base system and then rp-pppoe
2.- run adsl-setup and the user name, passwd
3.- i try adsl-start but time out
4.- try modprobe 8139too but time out agin
what i can do ????
the version is arch0.5.

im using 0.5 because i don´t have enouth time for download the last version
about the problem, add that in rc.conf, "8139too", and "alias eth0 8139too" in modules.conf, but, nothing hapend
the time outis when try with "adsl-start", if try with "/etc/rc.d/adsl start" then BUSY, "/etc/rc.d/adsl stop" FAILED.
only with gentoo(give up) and now arch happend this problem :?

I have a problem with the network on iphone 3gs, even when I can not call you ring someone

bejtush.k

If I understand correctly, you are in Romania and the phone was bought from Sweden. In order to unlock that device, you have to have the carrier in Sweden unlock it. If your phone just won't power on, then wjosten has provided the steps needed to try and power it on. Otherwise, if you want the phone "unlocked" or if it has been "jailbroken" or an unauthorized version of software has been put on the iphone, nobody can help you here.

HT1414 I am unable to install a newer version for my Iphone 4S error tells me something was wrong with the network?

I am unable to update my software to a newer version. I keep getting an error message stating there is a problem with the network? I am using my verizon internet service to update and it's not letting me?

Are you doing through the phone, or itunes? What version of ios are you running now?

Strange problem with the internet connection

Hello,
I've a strange problem with the network connection , I have bought a Iphone 3g in Italy in date 31st
October 2010. Now in Italy I have just subscribed a telephone rental with Wind company, where there is an unlimited internet service. The problem is that in my Iphone there is not the line.
All this is strange because I receive the messages from social networks (like facebook and msn) but I cannot open tha page for the internet connection. I have gone to Apple store and I have tried to put my SIM in an other phone (iphone 3g or 3gs): my SIM is perfectly working.
The problem is only for the internet connection on my phone because wifi connection is good.
Thanks!!

Please help everyone who has the same problem by posting yr solution, thx!

HT4864 I am getting a triangle with an exclamation point next to my inbox...it says: There may be a problem with the mail server or network. Verify the settings for account "MobileMe" or try again. The server returned the error: Mail was unable to log in

I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailable

Also if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.

Why do I get an "unable to connect - There may be a problem with the mail server or network." message from iCloud. I have verified the settings. I can access my iCloud account online but can't send or receive e-mail via the mail account.

Text limits to the "Question" link prevents a full explanation:
This is a long-time problem. I have tried to resolve it with Apple but their "Customer Support" is merely a name.
I can go online and access my e-mail but when I try to send or receive e-mail via iCloud through my internet server (Google fiber now but the same situation existed with my prior service), I receive "There may be a problem with the mail server or network. Verify the settings for 'Apple Email' and try again.
"The server returned the error: The server 'p0-imap.mail.me.com' refused to allow a connection on port 143."
Well, I have verified the setting and tried again and again and …
Well, you get the idea …

JungleTaxi Cabbie wrote:
Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
Enter your Incoming Mail Server, User Name, and Password using the following settings:
Incoming Mail Server: mail.me.com
User Name: Your iCloud email address (excluding @me.com)
Password: Your password
Last Modified: Jun 27, 2013
Maybe you should test these things before calling people out, because these settings do function perfectly well.
iCloud is not supported on Snow Leopard or lower, why bother to mention it?
The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
JungleTaxi Cabbie wrote:
Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
I never said that there was, perhaps you imagined it.

Error message in time machine: "There was a problem with the user name or the password of the network

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .

After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .

Hi,
What version of the OS did you upgrade from ?
Anything before OS X 10.8.2 may have an issue if the Logic/Mother board has been replaced and the Serial Number not "flashed" back to it.
In the Apple Icon menu use the About this Mac item.
In the new panel click twice on the line that tells you the current OS level
It will change to the Build number (and alternative count to the OS versions) and then the Serial Number.
If it is missing you need to get it replaced.
(It is supposed to be done on Repair or Refurbishment).
An Apple Store or Apple Authorised Service Provider as the best choices.
There are apps you can download (They are Mac Model specific) but needs careful typing as it is a once only trip.
8:56 pm Sunday; November 24, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
Message was edited by: Ralph Johns (UK)

Problem with the network (streaming-mirroring)

Similar Messages

Maybe you are looking for