Problem with the new bios 1.9
I just install that bios on my 645 and damn its mess up
My screen keeps on blinking from time to time since i have installed that bios. Anyone know how to fix that or how to put back the old 1.8 bios?
go to bios page,number or name in little search engine top right,pick main board page,bios link to right,choose bios d/l it,top of that page click bios d/l instructions
note if ntfs pick the none fat 32 ones
Similar Messages
-
I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?
I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?
-
Problems with the new Pages.
Hi everyone.
I wonder if i am the only one experiencing a little problem with the new Pages?
My problem is that every other time i want to correct the font lets say trying to underline or make the font fatter using the hotkeys "Command+B" or "Command+U" or "Command+I", or even changing it manually in "formats" my font gets stuck, and i have to copy-paste text from another pages-file into my old one to get et back to normal.
Anyone else tried this?
Martin.VladRO wrote:
These are the problems that I am encountering for the moment! If there will come up some new once, I will write them here!
Instead of starting a new list, go to
https://discussions.apple.com/thread/5468056?tstart=0 -
Problem with the new server UCS C220 for set IP to CIMC
Hi
We’ve a problem with the new server UCS C220.
We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability.
When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it never enters at the CIMC.
Then, we configure our DHCP server and our switch, we connect the three gigabyte ports to our switch to give him an IP to the CIMC, so and then can enter via browser, but neither works.
Note. The dedicated management NIC does not link, the other two ports do make link.
What do you suggest to put an IP to CIMC and start installing our applications?
regardsYou may have noticed that there is no DVD rom on the c220. What you need to do is:
Login into the CIMC from your browser
Luanch the KVM
Insert the VMware DVD in your machines drive
On the KVM pop up there should be a tab to mount the drive, after mounting it click on Macros and choose ctrl_alt+delete to restart.
After the VMware OS installs press F2 to enter IP.
Browse to the VMware ip to download the Vsphere client
Open the Vsphere client, enter the ip of the vmware and the username will be root and no password if you did not set one.
You can now upload OVA templates or manually create virtua machine from this enviroment.
Hope this help -
I am having email problems with the new Mountain Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help
Incoming Mail (IMAP) Server - requires SSL:
imap.gmail.com
Use SSL: Yes
Port: 993
Outgoing Mail (SMTP) Server - requires TLS:
smtp.gmail.com (use authentication)
Use Authentication: Yes
Use STARTTLS: Yes (some clients call this SSL)
Port: 465 or 587
Account Name:
your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
Email Address:
your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
Password:
your Gmail password
The Quick Answer
Follow the instructions below to set up IMAP1 access in most email clients.
Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option? The next page under ADVANCED: THERE IS A BOX SSL MARKED. Then IMAP Path Prefix - I put stmp.gmail.com.. is that right? Port 993 can use this one? as 456 doesn't work and 587 said it wasn't safe. Under AUTHENTICATION I used PASSWORD. Should I have used external client cert TLS?
Please help me set this up securely. ThanksApple - Support - Mail Setup Assistant
-
Since the most recent Firefox update 3.6.8 my banking institution no longer shows as having a secure encrypted connection, however, my bank assures me all is well with their certificates and that is a problem with the new Firefox browser update, can you give me some idea why it is doing this?
== This happened ==
Every time Firefox opened
== Right after the new Firefox updateHello Anne.
Can you please try it in a new (temporary) Firefox profile and see if the issue is still present? See [http://support.mozilla.com/en-US/kb/Managing+profiles this article] to know how to create a new Firefox profile. Please report back the results. -
Is Anyone Having Problems with the newer version of Firefox?
I still have my older Mac OsXv10.4 Tiger software. I wasn't exactly happy with Safari browser as it would block many sites and were considered incompatible so I downloaded the free Firefox browser (the 2.0 version) of which I STILL have. I'm aware that there is a much newer version and would like to download that, but I've heard a lot of people saying they have been having severe problems with it, but then they have PCs and not Macs.
So my question is for you Mac users that use Firefox, have you had major problems with the newer version? I'm real hesitant to download if I'm going to have the same problem PC users are having...like constantly crashing. Also would my old Tiger software be compatible? I don't want to upgrade to Leopard.Yes. I had problems with Firefox 3.5. The primary problem was very slow or never-ending loading of certain websites (particularly secure sites and sites with many features). I also have had similar, but not as bad, problems with Safari 4. I never had these problems with Safari 2 or Firefox 2. It just seems that with each update, the problems increased for me. I have read the Safari and Firefox forums and tried many fixes with little improvement. I have come to the conclusion that there is some kind of compatibility problem between the latest versions of Safari and Firefox and Shockwave Flash and/or Javascript and OS 10.4, particularly on PPC Macs. I expect there are many who will disagree and I cannot argue or prove the point. This is just my opinion. And I recognize that my problems could be caused by my setup and not by the browsers. By the way, I do not use any add-ons with any of my browsers. Anyway, I got tired of dealing with it and installed the latest version of Camino about 2 weeks ago. I also did a clean install of Firefox 3.0.13. Camino is working out great for me. It is simple and it works. No problems at all. So currently I am using Camino as my primary browser and Firefox 3.0.13 as my backup. I hope this helps.
-
I am having trouble with the music from my bluetooth "skipping" on my IPhone 5. I thought that this was an antiquated problem with the new technology. It's very frustrating to purchase all of this music and expect great sound and playability and get "skipping". Any ideas on how to resolve this issue?
Does the issue occur when listening to the media using the speaker or wired headphones? If it does, the issue is with the media itself.
If it does not, it's likely a bad connection or interference. -
I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?
Check System Preferences > Sound > Output
Make sure the correct device is selected. -
HT4623 Has any one had a problem with the new download?
Has anyone had a problem with the new download?
Here's what others have done successfully to work around that problem: In your Web browser, go to Photoshop.com and log in. You should be asked to accept the Terms Of Use. Once you have, then you won't have any issue with accessing Photoshop.com from PSE.
-
Is anyone having problems with the new update?? it has messed up my mail I can't send and all my passwords are messed up
Is anyone having problems with the new update?? it has messed up my mail I can't send and all my passwords are messed up
-
Is anyone else having problems with the new software update for macbook? I get random clicking and flicker an movement of the pointer!
OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”. -
Help with the new Bios 1.56 AND RAM Q
can high voltage for Ram, A-DATA 2X512 DDR500 2.85 for this case, can cause instablity, how do i know when to raise it, because it look like running fine with 2.70, and i oced it to 270mhz , 4000 in sandra. so what should the voltage be? and what problem can high voltage do?
and in the new bios there is the REFRESH RATE (TREF) and some crazy numbers, how should i know what to set it,
in A64 TWEAKER there is same option, Refresh Rate (TREF) , of course i am using the 200mhz, but can the 200mhz 15.6us cause to instabilty instead of the 3.9us ?
when ocing or not? how should i know if it causing any problems?
I am very very confused because i don't know how to oc right, i sometimes have crashes and blue screens when trying to oc, because always there is one option or setting that can make the instablity and to get real, there too Freaking many,
and how do i know for sure that Agressive timing doesn't causing to any errors or anything else? crashes and all kind.
PLZ if someone could answer those question i will be greatly happy, because i have no idea what to look for and i have some anoying problem with that, my ram is good for ocing and i really want stable ram with max speed.
and i think i am using the 1T i cant change it or anything. no where to change anyway.
THANX
AMD64 2800 NewCastle SH7-C0 1.8 @ 2.03 270FSB 1.63V
MSI K8N Nero Platinum 1.56Beta
A-DATA 2X512 DDR500 270mhz 4000sandra 3-4-4-8 1T
ThermalTake ButterFly 550Watt +12 18amp
Elsa Radeon 9800Pro 128mb 378/336
Audigy 2 ZS
PCI Latency 32Clk
FastWrite ON
i will have furture questions just need to get answers on those first.\
Hope someone could helpQuote
Originally posted by pinochio
1)Turn Fastwrites OFF
2)2.85 Volts won't hurt your Ram.(i wish MSI could give us MORE!!)
3)TRef depends on your Ram.I found mine to work best with 200 15.6us
but maybe yours doesn't.Experiment and see.
4)In the BIOS the TRef 1x,2x,3x,4x numers represent the "us" that you see above.
1x=15.6us , 2x=7.8us , 3x=3.9us, 4x=1.95us.The "cycles" you can play with.
5)Don't trust A64 for the Tref value.I have mine set to 15.6 and A64 Tweaker says 1.95
6)Use Rmma "Memory Analyzer" to see and even change your timings.
Went through the bios TREF , i have non 3X options.
This is what i found :
1:1552 100mhz 15,6us
1:2064 133mhz 15,6us
1:2592 166mhz 15,6us
1:3120 200mhz 15,6us
1:3632 100mhz 7,8us
1:4128 133mhz 7,8us
1:4672 166mhz 7,8us
2:1552 100mhz 3,9us
2:2064 133mhz 3,9us
2:2592 166mhz 3,9us
2:3120 200mhz 3,9us
2:3632 100mhz 1,95us
2:4128 133mhz 1,95us
2:4672 166mhz 1,95us
4:1552 100mhz 15,6us
4:2064 not tested ,assumed 133mhz 15,6us
4:2592 not tested ,assumed 133mhz 15,6us
4:3120 200mhz 15,6us
4:3632 not tested
4:4128 not tested
4:4672 not tested
128 cycles 200mhz 1,95us
200mhz 7,8us is missing in my system and setting it with A64Tweaker
cause windows to freeze .
You will find documentation of 1x , 2x and 4x (1K refresh,2K refresh and 4K refresh) here:
http://www.oempcworld.com/support/RAM_Technical_Perspective.htm -
[SOLVED][GRUB]Install problem with the new method
Hi,
it is not my first install of Arch Linux but I have a problem with this new kind of installation method, especially with GRUB.
Here is my hard drives configuration :
/dev/sda1 -> SSD 120 GB ntfs (windows)
/dev/sdb1 -> HD 1 TB ext4 (data)
/dev/sdc :
/dev/sdc1 -> ext2 /boot
/dev/sdc2 -> swap
/dev/sdc3 -> ext4 /
/dev/sdc5 -> ext4 /home
During the installation, I installed grub (with grub-install) in /dev/sdc. I assumed it was the correct drive to install it but apparently not, Windows starts automatically and I don't have the grub menu.
Should I install my system again or is there a way to boot on the livecd and install it ?
Should I :
1) mount /dev/sdc3 in /mnt then /dev/sdc1 in /mnt/boot and finally /dev/sdc5 in /mnt/home
2) pacstrap /mnt grub-bios
3) arch-chroot
4) grub-install
Thank you.
Last edited by hiveNzin0 (2012-09-12 06:15:15)DSpider wrote:
If you set whatever drive "/dev/sdc" is (brand and model) to boot first in the BIOS, all you need to do is install a bootloader on Arch. You don't even need a separate boot partition. It will use the /boot folder on root partition. Then install os-prober (if you don't already have this installed) and re-generate the .cfg.
https://wiki.archlinux.org/index.php/Be … bootloader
The problem is that I cannot select another hard drive. The only one available for the boot order is the Samsung 830 series (/dev/sda with Windows).
The other options are the CD drive and removable disk.
I checked that this morning, maybe I was too tired. I will check again this evening.
But if I am right and I cannot select my intel SSD (containing my arch setup) for the boot order, would the solution I described work ? I don't see why not but my knowledge are basic in Linux.
Thank you again for your help. -
I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!
Maybe you are looking for
-
How can i add custom attributes to a new Class Object using the API ?
Hello everyone, Here is my problem. I just created a subclass of Document using the API (not XML), by creating a ClassObjectDefinition and a ClassObject. Here is the code : // doc is an instance of Document ClassObject co = doc.getClassObject(); Clas
-
Hi..can I use the iPad2 camera as a webcam in msn messenger please
Can I use the iPad 2 camera in man messenger as a webcam please
-
Reds turned to rust in CS 5, Reds are accurate in Windows. How can I correct this.
-
My ipod nano pauses a minute into ever song...I have to unpause it everytime?
-
What are the business processes and process flow in RDS for PM and what are the difference of RDS comparatively with Standard PM process ? from where I can get document and process of RDS for Plant Maintenance