Problem with the "now playing"-function after timer sleep-mode

At first: sorry for my english.
I have the following problem with the Nano 6G: I set the timer of my iPod Nano to shut it down after a while of playing. When I turn it back on afterwards, the now-playing-button does not show the song that it played at last. Instead of that the nano is automatically set to shuffle mode which was not activated before and the now-playing-button will show any other song randomly.
This does not happen when I switch it to sleep-mode with the button on the top, only when the sleepmode ist activated by the timer.
Does anyone notice the same issue with his nano? How can I bring my nano to play the same song after the sleepmode, that it played before?

Hey Ipaqman, that strange behavior of the Nano 6G annoys me for exactly the same reason: audiobook in bed + sleeptimer = losing the place. As You say, the 5G works better with that and I also hope that Apple takes notice of that issue and will solve it.
Until that I got myself a "workaround". I create a new playlist on the device, with just the single audiobook in it, that is actually in use. This helps me finding back into it, as long as "now playing" will not work correctly with the sleeptimer.

Similar Messages

I have a problem with the apple service team after making a payment. Where do I take the issue up?, I have a problem with the apple service team after making a payment. Where do I take the issue up?

I have a problem with the apple service team after making a payment. Where do I take the issue up?, I have a problem with the apple service team after making a payment. Where do I take the issue up?

If you are dissatisfied with the Service you have received and wish to Contact Apple...
India
Start your support request online and we'll connect you to an expert.
(91) 1800 4250 744
www.apple.com/in/support/
From the above Link...
To Contact Apple World Wide for Support and Service
http://support.apple.com/kb/HE57

Was there a problem with the last update? Every time I try to watch a video on the net it goes back to the home screen

Was there a problem with the last update? Every time I try to watch videos it goes back to the home screen

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I have a 7th generation ipod, i have a problem with the pause/play button, it no longer works.

I have a 7th generation ipod, i have a problem with the pause/play button, it no longer works.
What does it take to make sure it works ????
Thanks

If you successfullt restore to factory defaults/new iPod and still have the problem then it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

HT201365 ahs anyone had a problem with the passcode to iphone after ios7?

Has anyone had a problem with the passcode to iphone after ios7?

This link may help with your passcode issues:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212?viewlocale=en_US

Are you having problems with the Lacie external drive after upgrading to the new operating system

Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?

See here for everyone discussing the issue you are having:
https://discussions.apple.com/thread/5475136?tstart=0

HT1338 I have a problem with the calendar and notifications, every time I dismiss or snooze locks up and hangs, just reboot goes.

I have a problem with the calendar and notifications, every time I dismiss or snooze locks up and hangs, just reboot goes.

Have you run Disk Utility/Repair Permissions and/or deleted the .plist from your user library To see the user library, hold down the option key while using the Finder Go to Folder command.

My macbook pro 2.0 early 2011 will not go to sleep with the power source connected. only enters sleep mode when running on battery. Someone did this happen, and it could solve?

Alo, my Macbook pro i7 2 GHz Intel Core i7 (early 2011) will not go to sleep with the power source connected. only enters sleep mode when running on battery. Someone did this happen, and it could solve?

There is no output from that command line? Maybe the pid changed.
I'll repeat what I am trying to find out...
1. You do a pmset -g on the terminal.
2. The output from that pmset should have a line that says "sleep 0 (imposed by n)" where n is some number.
3. The ps ax | grep n is supposed to display what the process associated with n is.
It's the output from step 3 that should indicate what is causing you not to sleep.
But speaking of sleep, that's where I am going.

How can I see the "Now Playing" music screen in horizontal mode on my iPhone 6 plus?

The iPhone 6 plus is too tall to stand up on my elliptical trainer but when I rotate it to horizontal mode, the music app's "Now Playing" screen turns into that song icon screen. Is there some way to make it show a horizontal version of the "Now Playing" screen?

Go to the app store and search using the term YouTube. You should see a number of apps that will give you access to it.

Problem with the math library functions

Hi,
I encountered a problem related to some functions provided by math library on sun. I narrowed it down to the following test program:
========================================================
#include<stdio.h>
#include<math.h>
void pow_res()
double x = 10.0;
double y = 2.5;
printf("pow(%.2e, %.2e):%.20e\n", x, y, pow(10.0, 2.5));
void cos_res()
double x = -6.433230338433114370e-02;
printf("x:%.20e cos(x):%.20e\n", x, cos(x));
int main()
pow_res();
cos_res();
return 0;
========================================================
The above test program has to be linked with any math library. It is �libm� for amd64/linux, but for sparc we have choice between �libm� and �libmopt�. I am compiling above program with "cc <test_program.c> <-lm/-lmopt>" command.
On sparc, if the above test program is getting linked with �-lm" then it gives same results for the �cos� on both amd64 and sparc, but gives different results (16th decimal digit onward) for �pow�. If it is getting linked with �-lmopt� then it gives same result for the �pow� on both the platforms, but gives different results for �cos�. Linux results match with the amd64 results.
The �Numerical Computation Guide� provided by SUN (ftp://docs-pdf.sun.com/802-5692/802-5692.pdf page 40, table 2.10 ) says that you can trust only 15-17 decimal digits for double calculation. But here the requirement is to match the sparc results exactly with the amd64/linux or at least match the result till 20th decimal digit. I guess it is something to do with the FPU setting either through compiler options or code. I tried many different compiler options, like -fast, different combinations of compiler options provided by -fast macro, but nothing helped.
Following is the system configuration:
Amd64:
gcc version: 3.3.6
OS: RedHat Enterprise Linux 3.0 U7 (Linux 2.4.21-40.ELsmp x86_64)
Sparc:
cc version: Sun C 5.8 Patch 121015-01
OS: SunOS 5.9 Generic_118558-21 sun4u sparc SUNW,Sun-Fire-280R
It will be great if somebody can explain the problem and the solution to get rid of it.
Many thanks,
Sunil

Transcendental functions are not specified to be correctly rounded in the same
sense as +-*/. So it's entirely possible, and often observed, that libraries of equal
quality deliver slightly different results.
To simplify, suppose one wanted to compute x = 4*atan(1.0)
which happens to be the
transcendental number pi which is roughly, in hex and in decimali:
.C90F DAA2 2168 C234 C... * 2^4 or 3.141592653589793239...
But binary floating-point arithmetic can only represent certain rational numbers of
the form of an integer of at most 53 significant bits times a power of two. The
nearest double-precision number to pi is
.C90F DAA2 2168 C * 2^4 or roughly 3.141592653589793116...
This particular number has a large but finite decimal expansion. And if you
do printf with %e.20 you will get the 20 decimal digits of that double-precision
number's expansion, not the 20 decimal digits of pi, which only agrees to the
15 significant decimals 3.141592653589793 and differs afterward.
In the case of pow(10.0,2.5), (which happens to be sqrt(1.0e5))
the correct result in hex looks something like
.9E1D 276F D4BA C410 C... * 2^9 or roughly 3.162277660168379332...E+2
in hex notation, while the closest double precision number is
.9E1D 276F D4BA C8 * 2^9 or roughly 3.162277660168379612...E+2
but it's only slightly closer than the next closest double precision number
.9E1D 276F D4BA c0 *2^9 or roughly 3.162277660168379043...E+2
Either answer is a good answer, and math libraries might that only aspire to
deliver results that are close to correctly rounded might deliver either, depending
on which approximation algorithm is used, which might depend on what's fastest
on a particular processor.
So why don't math libraries deliver correctly rounded results instead of almost?
Because the slight extra increase in accuracy doesn't do much good for most
people, and the major decrease in performance is noticeable by lots of people.
The main payoff of correctly rounded transcendental functions is that they
promote uniform numerical results across platforms, which is worth something
to some people but not much to many people.
So for those who find it worthwhile, there are correctly rounded transcendental
function libraries available. Sun's development version is available at
http://www.sun.com/download/products.xml?id=41797765
Another solution for some people is to change double variables and functions
to long double, using powl and cosl in the examples. That increases the
accuracy to almost 20 digits on x86 and over 30 digits on SPARC, and while
the same issues eventually arise, most users would never encounter them.
The SPARC long double implementation is in software rather than hardware,
and so entails a major performance reduction compared to double.
The Numerical Computation Guide at docs.sun.com discusses many of these
issues at greater length.

I have problems with the wi-fi connection after upgrading my iPhone to iOS 5- why?

Since upgrading the software on my iPhone 4 to iOS5, I have had all sorts of wi-fi connection problems.
The wireless router I have always used is now usually not detected by my iPhone. It still works on my MacBook and iPad, but not on my iPhone. When it is detected, the connection lasts for a few minutes before cutting out. The signal is also very low.
I have tried the following:
-Restarting the router
-Restarting my iPhone
-Resetting my network settings
-Restoring to factory defaults
-Forgetting the network
-Rejoining the network
-Setting up the connection manually
-Turning off location services on my iPhone (I read in another thread this would help)
I am running out of ideas and I have tried researching this. I found many people with the same problem but no solution for my problem yet.
Does anyone have any ideas, or know whether Apple is planning on fixing this anytime soon? It's a huge disappointment.

I tried this! Somebody suggested it in another thread. It did not work, sadly.

Hello my Power Macintosh G5 2.7 DP (PCI-X) flashes and tell me theres a problem with the installed Ram! some times it powers on with no problems but now its saying there a ram fauilt and dont boot! any help here please thanks

hello i have a powermac G5 it flashed lights tells me it has a Ram fault but some times it pwers on with no problems odd any one give me advice on this ? thanks

Hi, while it could be the RAM, it seems more likely a RAM slot solder problem related to temperature.
Does it do that when it's colder?
If you're sure the RAM is good, try the Hair Dryer trick...
http://discussions.apple.com/message.jspa?messageID=13240047#13240047

Hi guys , when I tap a song on my iPod touch it plays the wrong song and sometimes it comes up with the now playing screen but no matter how many times I press play it doesn't play ,what's wrong with my ipod

When I play a song on my iPod it immediately skips a song and sometimes doesn't play any song at all

- Try a reset. It cvures many ills.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync and then resync the music
- Restore from backup
- Restore to factory defaults/new iPod.

Problem with the ECC6 Data sources after migration

Dear All.
I transfer all the data source which is required for sales overview cube 0SD_C03.
lets take two senairos.
for example take 2LIS_11_VAHDR to BI 7 and then i migrate this data source with Export option after that i activate the data source and then i initialize the delta request with data.
the request successfully generated in BI to R/3 but in monitor it shows in yellow for long period of time and no data arrive i wait for 30 min but nothing happen.
in second one i initialize the delta process for data source 2LIS_12_VCHDR this data source i did't migrate but face the same situation.
can you please explain what will be the cause of this and how i can manage to fetch the data from ECC6 client through Business content data source.
i did not migrate the update rules into transformations.
any help will be highly appreciated.
kind regards,
Zeeshan

yes that is what exactly happen i did not do any thing as in the previous update rules there are written complex abap routine.
please let me know how to generate the update rules as was there previously or if i have to revert the datasource back to the previous position what i have to do.
i have figure out that why the data is not coming from SAP just need steps that how to revert the data source or make the new transformations with generated update rules or transformation.
any help will be highly appreciated.
Kind Regards,
Zeeshan
Edited by: Zeeshan haider on Jun 2, 2009 6:02 PM

Problems with the key word function

Have recently acquired Lightroom. I uploaded my photos into Lightroom and have pretty much key worded all of them. I have had something happen which I am not sure why and hope you all can enlighten me. I did a search for Flower and my flower photos showed up along with a bunch of other photos. These other photos did not have the key word flower yet they appeared in the group. Any idea why? Thanks in advance.
Mike

Thanks for responding. I did try your suggestion and only those photos with flower appeared. I just solved my problem though I don’t know why it happens. When I selected text at the top of the window, I left the other fields alone. This time I changed any searchable field to Keys words and that caused only the key worded photos to appear. I till don’t understand why leaving “any searchable field” the way it is would cause this. I could understand if all the photos then appeared but they don’t only a few.
Anyway thanks for responding, I appreciate it. I wonder if anyone else has experienced this?
Mike Crosa

Problem with the "now playing"-function after timer sleep-mode

Similar Messages

Maybe you are looking for