Problem with the release trigger in EXS 24

Hello!
I´m working on a sample instrument in EXS 24 and can´t really get the release trigger to work properly. I´ve tried to adress a sample to sound when i release the key, by placing the sample in a group for itself and choosing the "key release" option for that group in the trigger menu in the group editing window. The problem is that the sample is not played.
Any ideas?
Running Logic Pro 9.00 on Snow Leopard.
/Joel

Hi there,
I remember running into this problem myself a while back and I can't remember what the solution was. I found this answer on another forum which i thought might help. I think this was the solution, although I haven't tried it (before posting this).
Another use would be to sample a brass instrument and loop a section, then triggerthe very end of the note.
To do this, in the EXS editor select group then make sure View>Group Voices is enabled. Her you can set the trigger for a sample to be Key release rather than the normal Key Down. You can now use vel range to assign that group of samples to play at whatever the release velocity is, ie how quickly you let go of the key. (I think - someone please correct me if I'm wrong about that, it's a long time since I did this in EXS)
I hope that helps.
Best
Felix

Similar Messages

I got my iphone 5 3 weeks ago and the battery life is very short. It drains out very fast. Does anyone know if it's a problem with the iOS or with my phone? Because I'm a bit concerned

I recieved my iPhone 5 3 weeks ago and the battery life completely *****! After doing a few things and maybe using it for about 30 minutes the phone start overheating like crazy then the battery starts dropping very fast. Does anyone know if it's a problem with the iOS or with my phone? And is anyone else expierenceing these problems?

It sounds like you have an app that is incorrectly continuously using data and power... from normal use the phone should NOT be getting that warm... only constant video playing via data like Netflix for example would result in that...
I'd say that you should remove all apps in the recent app tray... tunr phone off... then once you power back on...
Hold BOTH home and sleep wake buttons together until you see a white apple symbol... then release both buttons...
This will ensure you have no apps running...
I've experienced a hang up with mail while out and about that has resulted in this on my iPhone as well... Once I performed these steps it was fixed... it seemed like it got stuck and that's what caused the warm phone and battery drain...
I notived that when it gets stuck (mail app that is) I will see the text connecting at the bottom and it never changes to "updated" like it should... this is my trigger that it's gotten stuck.
Have not really figured out what causes mail app to get stuck yet...

Problems with the (WINDOWS 8 pro -64 BIT) IN THINKPAD L520 - 5016 RL2

I have some problems with the (WINDOWS 8 pro -64 BIT) is not working properly IN THINKPAD L520 - 5016 RL2.
1. Message appears telling me that the drivers of the display has been restored crash.
2. The mouse pointer moves very slowly sometimes, and sometimes does not move for a while.
3. Device software such as lenovo-airbag protection , lenovo-internet connection and lenovo web connection........ its is not compatible with the system, and do not work.
What is the solution؟

Hi, MUJAHED
I have a few questions for clarification I would like to ask about your first two issues:
1) Can you copy the contents of this message and respond back with them. Any error codes or direct quotation from the system can really help in diagnosing a problem.
2) Does this only apply to the TrackPad, or does this behavior also occur with an external mouse? It may help to download the latest mouse drivers for your system, which can be found here.
As for your last issue with the Lenovo service not being compatible with the system: Unfortunately, software for these applications has not been released for Windows 8. Windows has its own network settings that you can use to connect to the Internet and networks, so that is still possible, though you may not enjoy it as much as Lenovo's program.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Upon firefox update this morning, every window opens with error: CaptureMovieFox could not be initialized. Some files of the extension may be missing or there is a problem with the Firefox.

upon firefox update this morning, every window opens with this error in a popup: ''CaptureMovieFox could not be initialized. Some files of the extension may be missing or there is a problem with the Firefox.''
when I close the popup, the original window opens seemingly without issue.

http://getfirebug.com/releases/firebug/1.8/
visit this and find the compatible version of this f***ing firebug. which certainly has nothing to do with us (not-programmers). i have been having this problem for months but now the last link worked for my firefox 6. Find yours here.

Problems with the iOS 5.1 version, HELP!

I just upgraded to the latest version - iOS 5.1 on my iPhone 4, but now the screen is freezing all the time, and the phone shuts down. Is this a problem with the new 5.1 version? What can I do to fix it?

Try to restore it... I'm hating this iOS 5.1, everything was working much better before it was released. I shouldn't have upgraded...

Problem with the standard RMDATIND

Good afternoon
I say that tango is a problem with the standard load of the material RMDATIND where the burden me all the good materials but in the CAT type of feedstock me what brand as subject to lot but I do not step parameter that the program that will be That someone can help me ..

Thanks for the suggestion to debug the problem - but I have no idea what I'm looking for.
I answer to your question, this is not restricted to just the one user. It has happened to a few, but not all. Not sure what the trigger is.
Now it has happened for a non-portal user, that is to say when I run it test mode from SE80. Debugging has not shed any light on it. All behaves as I would expect. All the alv formatting code is executed, then the component loads and by default the 'standard view' has all column set as hidden.
Looking at this from a different perspective, when, in an alv you create a custom view and 'save as' to store the settings, does anyone know where that is saved too ? Can we delete the settings for the user ? or see the personalization ?

TS3938 I have a problem with the CD player plays some species, others give me this letter no longer supported PowerPC

I have a problem with the CD player plays some species, others give me this letter no longer supported PowerPC

Educational software suffers from having been written many years ago, but the financial market is not such to give the publisher much incentive to update the software.
The problem for you is that Top Notch 2 with ActiveBook was written and released by Pearson back when Macs utilized the PowerPC CPU platform. In 2006, Apple migrated the Macs to Intel CPUs, but released their Operating Systems with an invisible translation program, Rosetta, so that the user could continue to use their existing library of PowerPC applications and take time to update them as needed.
The problem arises in that Apple no longer continues to update Rosetta for inclusion in Lion and now Mountain Lion, so that your CD-ROM cannot be executed on your Lion Mac.
Since Pearson looks unlikely to rewrite and release an Intel version of Top Notch 2, you must find a workaround that will play your CD-ROM and allow you to continue utilizing your ActiveBook.
You do not indicate which model of Mac you are using. If you upgraded it to Lion from Snow Leopard, you have these workarounds:
1. Revert to Snow Leopard
2. Partition your hard drive or add an external hard drive and install Snow Leopard into it. This will allow you to "dual-boot" into Snow Leopard when you need access to run Top Notch 2. You would then have to "dual-boot" back into Lion when you needed access to those features required by Lion.
If you purchased a new Mac that came with Lion, you only have one workaround available to run Top Notch 2:
3. Install Snow Leopard (with Rosetta) into Parallels
[click on image to enlarge]
There is an easier way to run your Top Notch 2 in Parallels if cost is not a significant factor for you. You must purchase Snow Leopard Server from a third party souce, such as eBay, which when sold by Apple was $499 or more. I now see that it can be purchased on eBay for as little as $51. Parallels allows for easy installation of Snow Leopard Server into Parallels.
If cost is a factor, then use the link above the photo to follow my instructions on how to install Snow Leopard client ($19.99 from Apple) into Parallels and achieve the same result.
Lastly, you could purchase a used Mac that will allow Snow Leopard to be the boot OS X installed (wth the optional Rosetta installed). But this seems like an expensive alternative just to run one piece of software; and subject to hardware failure without notice or recourse.

Problem with the crystal reports XI

Portuguese
Boa Tarde, tenho um problema com o cristal reports XI.
ele esta em producao fazendo a consulta em um servidor mas quando eu acesso passando parametro connectionInfo.ServerName = <endereco do servidor> para um servidor de teste pelo VStudio 2005, ele nao busca os dados deste e continua acessando o servidor de producao.
gostaria de saber como consertar isso
English
Good afternoon, I have a problem with the crystal reports XI. him this in production making the consultation in a servant but when I access passing parameter connectionInfo.ServerName = I address of the servant > for a test servant for VStudio 2005, he doesn't look for the data of this and it continues accessing the production servant.

Fabiano, here is what I understand of the issue:
1) You are using CR XI (I am not sure if release 1 or release 2)
2) you are using .NET 2005
3) you are trying to change the server name, but the report keeps giving you data from the original server
Please answer the following:
1) Are you using CR XI release 1 or release 2?
2) Can you change to the new server, using the Crystal Reports Designer?
3) Can you duplicate the issue on your development computer?
4) What Crystal Reports service pack are you on?
5) Are you connecting to the database using OLE DB?
Ludek

Problems with the sap* password

Hi,
i have a problem with the sap* password.
I tried my masterpassword but it did not work.
So i tired the following from the Tread: Password problem with user DDIC
resetting password for sap*
sqlplus "/as sysdba"
sql> update sapsr3.usr02 set bname='SAP1' where bname='SAP' and MANDT=000;
sql> commit;
Bud it did not work. After i tried to delete the sap*1 from the table sapsr3.usr02 but it did not work.
sql>delete from sapsr3.usr02 where mandt='000' and bname = 'SAP*1';
I also restarted the instance after the commands. But i can not logon with 'sap*' and the password 'pass' .
Mybe someone can help me?
Regards
Mike

Starting with release 7.00 based system you have to set
login/no_automatic_user_sapstart=0
in your instance profile and restart the instance.
Markus

Problems with the display resolution on Android

We have a problem with the display resolution on our Google Nexus 7 (2013) and our Multi-Folio-App. If we watch an article inside our published Multi-Folio-App, the article does not use the full screen of the tablet. But when I look the article inside the content viewer, it use the full screen of the tablet. For your information: We use the resolution of 1280 x 800 and the tablet has the highest resolution of 1920 x 1200.
However, under iOS it works without problems. We use the iPad 4 (2048 x 1536) with the article resolution of 1024 x 720. Do you have any idea what we can do? Under this post, you can find two screenshots which discribe the problem.

Scaling was introduced in v28:
from http://helpx.adobe.com/digital-publishing-suite/help/whats-new-release.html#what_s_new_in_ this_release
Content on Android devices scaled up
In previous releases, smaller renditions in Android apps were not scaled up, causing both letterboxing and pillarboxing. With v28 AIR-based Android apps, smaller renditions are now scaled up proportionally.

After updating to itunes 10 i now get an error message saying there is a problem with the windows insaller package - I have tried all the suggestions but nothing works for me - have I lost all my itunes forever?

After updating to itunes 10 I now get an error message that says there is a problem with the windows installer package. I have tried all the things that others suggested but cannot download itunes at all now. Have I lost itunes forever?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Hallo, i have a problem with the intallation about after effects. I have a mac 10.6.8 and they told me I can't installete it because i don't have a system with 64 bit. how can i do? someone told me i can .. but i don't know how. thank you

hallo, i have a problem with the intallation about after effects. I have a mac 10.6.8 and they told me I can't installete it because i don't have a system with 64 bit. how can i do? someone told me i can .. but i don't know how. thank you

You cannot. If someone else told you there is a way then they will need to show you. After Effects requires a 64-bit system and the latest release requires Mac OS X v10.8 or v10.9 minimum

I have a problem with the FM "RH_START_EXCEL_WITH_DATA".

Hi,
i have a problem with the FM "RH_START_EXCEL_WITH_DATA". After the release of our SAP-system changed to gui 7.1 the FM doesn't work. After calling the FM with an filled internal table Excel starts but the spreadsheet is empty.
What can i do without changing Function 'RH_START_EXCEL_WITH_DATA'?
CALL FUNCTION 'RH_START_EXCEL_WITH_DATA'
EXPORTING
data_name = hf_datei
data_path_flag = 'W'
wait = ' '
data_table = iexcel[]
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE e020 WITH hf_datei sy-subrc.
ENDIF.

Hi Jake,
Pass the filename with .xls extension.
e.g
DATA: t_scarr LIKE STANDARD TABLE OF scarr.
SELECT * FROM scarr INTO TABLE t_scarr UP TO 10 ROWS.
CALL FUNCTION 'RH_START_EXCEL_WITH_DATA'
EXPORTING
   DATA_FILENAME               = 'Santhosh.xls'
   <b>DATA_PATH_FLAG</b>       = 'W'
   DATA_TABLE                      = t_scarr[]
   WAIT                                   = 'X'
EXCEPTIONS
   NO_BATCH                  = 1
   EXCEL_NOT_INSTALLED       = 2
   INTERNAL_ERROR            = 3
   CANCELLED                 = 4
   DOWNLOAD_ERROR            = 5
   NO_AUTHORITY              = 6
   FILE_NOT_DELETED          = 7
   OTHERS                    = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
And u just check the Value range for domain HRPATHFLAG. U will come to know what are values u can pass for the <b>DATA_PATH_FLAG---Path Flag for Directory Determination</b>. U have some 6 values for that domain.Choose carefully or else u ll get a download error.
I hope this will help u.
Thanks & Regards
Santhosh
Message was edited by:
        santhosh ds

I have a problem with the keyboar.when i push the key enter it doens't work

i have a problem with the keyboar.when i push the key enter it doens't work

Final Cut Express was discontinued about 18 months ago, before the release of Lion (10.7). It is no longer a supported product and was never supported on Lion, nor on Mountain Lion.
While some FCE users have had success running FCE on Lion, many have reported problems including problems with chroma keying. I do not recall any solution to the chroma keying problem, but you might try searching this Forum to see what others have discovered or tried.
Final Cut Pro X is the app supported on Lion & Mountain Lion, and the future direction Apple has taken. Since your computer lab has already moved to Lion (10.7.5) and presumably will move to Mountain Lion in the future, you should begin the process of moving to Final Cut Pro X. I appreciate there are implications for cost, training, inconvenience and re-doing lesson plans. But technology moves on and at some point we need to move with it too.

Still after update to 5.0.1 same problem with the 4S with dial out, connecting to internet, echo in reception. It is the second phone.

Still after update to 5.0.1 same problem with the 4S with dial out, connecting to internet, echo in reception. It is the second phone.

Try deleting the account(s) you're having problems with, resetting your phone (hold on/off and home buttons simultaneously 10-15 seconds until Apple logo appears, release buttons and wait for it to restart), then add back your mail accounts. I've read that this has worked for some.

Problem with the release trigger in EXS 24

Similar Messages

Maybe you are looking for