Problem with the speaker for Xperia Z2

Hello All, Could you please help me and advise about my issue, i did an upgrade in the software as the mobile itself asked to be updated and after  the updates and when using the mobile in receiving calls the sound is not clear and the other person cannot hear me very well , sometimes its like mute, also the when i want to use the speaker in calls the other part in the call cannot hear anything from me and when i turn off the speaker it still same problem so i need to recall the person again and using the ear speaker to talk, but from the speaker it doesnt work.  please advise since its a very annoying thing to have in my Z2

mido-shora wrote:
i had same problem with my phone when i wash it with water the speakers have some noise  but after while ..... i think after speakers get dry......it works fine againHello and thanks for your reply i never put my mobile in water, or wash it before i think the issue is not becasue of that, when making calls its working fine and other sdie hearing me clearly but after turn on the speaker its like something happned and its mute! i dont know why!

Similar Messages

  • After a successful home button repair, I've got a buzzing sound when I make or receive calls. No problem with the speaker as I can listen to online radio stations and my music.

    After a successful home button repair on my iPhone 4, I've got a buzzing sound when I make or receive calls. No problem with the speaker as I can listen to online radio stations and my music.

    I guess your definition of a "successful repair" is different from most people's.
    If you got it serviced by Apple, take it back to them.
    If you had it serviced by a 3rd party, Apple won't touch it. Take it back to whoeever fixed it for you.

  • I have a problem with the speaker while using viber, Tango and rebtel

    I have upgraded my iPhone 4 to 5.1.1 and in no time I started having a problem with the speaker. It simply doesn't work at all with Viber, Tango  and Rebtel. It works fine with direct calls but not with calls through these applications. I have contacted Tango and Rebtel in this respect but non could help. Is anyone experiencing such problem. is there a solution. Many thanks for your helo

    Thank you. Have given it a try - it sort of works, although doesn't turn up very loud!

  • Haviing problem with the facebbok for 9800

    i hava a problem with the facebook for blackberry 9800, i download it many times but i can not see the i con, i used many ways to find out it, but failed to find it,

    Hello nomanmahmoo, 
    Welcome to the forums. 
    Have a look at this article which may help you out with your issue. 
    Facebook icon is missing on the BlackBerry smartphone after upgrading to Facebook
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • I have a problem with the indicator for power on the side of my HP DV6-1341el.

    I have a problem with the indicator for power on the side of my HP DV6-1341el. Insert the adapter's power jack on the notebook in front of the LED battery charging works, windows detects that the battery is charged, but if I use the diagnostic programs, they tell me they found that the computer is running on battery power and not AC mode.
    Where is the problem?
    I have also made the maneuver for the recognition by the operating system of the battery and does not seem to be there the problem.
    If I use the laptop without battery in AC mode happens that led to the side of the notebook blinks twice, three times and then goes off when I put the power jack.

    Go into the Device Manager. Expand the battery device, select the ACPI-Compliant Battery Control Method device, right-click it and select uninstall. After you have done that, right-click any device in the Device Manager and select scan for hardware changes. Your operating system will reinstall the  ACPI-Compliant Battery Control Method device. 
    Post your results whether they are negative or positive to keep us posted.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

    Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

    Hi Chhayank,
    the problem is not the exported xls. If you have a look inside with Notepad or something like that, you will see that your leading zeros are exported correct.Excel-settings occurs this problem, it is all about how to open the document. If you use the import-assistant you will have no problems because there are options available how to handle the different columns.
    Another solution might be to get familiar with ABAP2XLS-Project. I got in my mind, that there is a method implemented, that will help you solving this problem. But that is not a five minute job
    ~Florian

  • Problems with the speaker

    Hello!
    I bought the iphone 5 in Portland Oregon, but I live in Prague, Czech Republic. The phone have a problems with the speaker, it does not work. Where can I obtain warranty service? Should I go to the USA or I can do in Prague?

    First make sure the mute switch is not on, left side, then try restarting your iPhone by holding down the on/off and the home buttons at the same time until your see the Apple logo. 

  • TS1630 Hi have a problem with the speaker on my iPhone 4S. I can hear people during calls but phone has no sound for media or ringtones etc. any ideas?

    HI
    I Am having a problem with the sound/speaker on my iPhone 4S. Have no sound for media services ie iTunes but I can hear people when they ring me. Any ideas?
    thanks

    If you have a docking station try putting it on there.  I lost my sounds, docked it and they came back immediately.

  • Problems with the Search for room content

    Hi,
    I face a problem configuring the search for room content using KM search iView (com.sap.km.Search).
    I found the chapter Configuring the Search for Room Content in the help. So I set up the following things :
    1- I assign the room_id iView parameter to the roomid room parameter (in the template)
    2- I added room_cm_search component to the component set (I added it at the bottom of the "component for basic search function")
    3- I select the entry "Folder" as the default search scope in the search option set. I specify a root folder for search as well.
    But it doesn't work properly. It always returns "no result found". And if I add the room_cm_search component at the top of the "component for basic search function", It runs the search on all the documents of the default search scope, and not only on the room documents.
    Can you please tell me the right way to configure the search for room content using the com.sap.km.Search iView ?
    I work on EP 7.0 SP 10.
    Thanks a lot,
    Loïc LEVEUGLE

    Hi Loic,
    the Room Content Search iView is a special Search iView that is filtering for documents that were created in the Room Context (all documents get a specific metadata that is keeping the roomiD) . The easiest thing is to use the standard iView used for the delivered templates from SAP.
    I would advise to use the iView that is already preconfigured for a room template or part template and can be found and referenced in your template from the following path: Portal Content ->com.sap.ip.collaboration--> TemplateAndPartContent --> Generic -->iViews and take the iView "Search Room"
    If you reference that iView in your room template or room part template, you have to think about the correct configuration in the template configuration iView. Just take as example the configuration of the part template "SAP Search Room".
    Or even better: Copy a template (room or part) from SAP that is containing the Room Search and delete everything what you don´t need out of the template. You safe time and you can add all additional content you´ll need to your template. Some ideas can be found in the following "How to Guide":
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0496f69-cb70-2910-21a6-c4cf2cc66311
    What you have written under 3 -> would never work as the root folder for search doesn´t make any sense as the documents of a room are stored in different folders and you can´t define a root folder. Therefor you have the specific room_id parameter that is filtering what documents belong to the room.
    Good luck,
    Anja

  • Problem with DK26 dock for Xperia Z

    i just got my DK26 dock today and tried it out. it seems that whenever i plug in my device onto the dock, it'll reboot my phone every 5 to 10 minutes without failing! my sibling on the other hand has no issue on this. i have an SDcard plugged into my phone while my sibling doesn't. can anyone help me with this because its irritating.

    Might be related to the SD card yes. Try formatting the card via your computer and see if the problem persists. Remember to backup all the data on the card you want to save.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Problem with the speaker when listening to music

    I've been having problem with my iphones speaker when im listening to music through it, like u would hear a bad sound and annoying noise, wat can i do to fix this problem?

    Another thing to think of that might help.
    If you hear an odd sound intermittently over speakers when the iphone is near, that could be GSM interference. GSM phones produce this interference when contacting the cell network. You don't have to be using the phone for this to happen. The phone is in constant contact with the cell network to check time, signal strength and a range of other things you might have turn on the phone.
    one way you could test this is to put the iphone into airplane mode and play the music for a while.
    Hope this helps.

  • Problems with the driver for the HP E3631A

    I have installed the driver of NI for Labview version 5.1.
    I need to send information to a DC Power Supply ( HP E3631A), this information is just to set the output voltage for the HP E3631A.
    I'm using the "getting started.vi" for the HP E3631A, normaly this must work !
    I have called with support from NI,
    But they couldn't tell me what the problem was !
    The problem is that when I set the voltage on my PC ( using labview),
    and run the getting started.vi, I always get the same outputvoltage from my DC Power Supply. ( HP E3631A ) ( +0.288V )
    You first need to choose between +6V, +25V and -25V.
    The strange thing is that when you change this, the DC Power Supply
    changes correctly, follows these settings.
    So the DC Power Sup
    ply follow's the +6V, +25V and -25V when you change these, but always gives the same voltage when you set the outputvoltage.
    Can you tell me what the problem is ??
    Thanks in Advance !
    Hope you can solve my problem !!!

    Pauwels,
    You may also check in the Configure Output.vi, which is one subvi of the Getting Started VI, and try to set the boolean for output(which is On=True by default) to false. I do not have the power supply, but my guess is that this boolean when set to true, only allows the predefined values.
    Regards,
    Cyril Bouton
    Applications Enginneer
    National Instruments
    Cyril Bouton
    Active LabVIEW Developper

  • Just purchased Wndows Vista and having problems with the port for Palm 125

    I just purchased a Windows Vista computer and having problems with getting my Palm 125 to sync with the desktop.  I get an error message saying:  "Com1 not available"  What do I do?
    Thanks,
    Frustrated
    Post relates to: Palm m125
    This question was solved.
    View Solution.

    Sorry, that didn't work.  I get no drop down menu from the Hot Sync Manager for the Serial Port.  What comes up often is:  "The selected port, COM1, is not available at this time.  Hot Sync Manager will open the port when it becomes available." 
    Could it be the Norton Antivirus Firewall that is preventing the Hot Sync Manager to open the Serial Port?  Just a thought.  Thanks for your help.
    Post relates to: Palm m125

  • If there is a problem with the wifi for i pod touch or i phone like i have read just like the problem with mine wilix for this problem l there be  a f

    i pod touch wifi works for few minutes then goes off seems lots of people having same problemsif it is a problem with latest software updates apple should put this right.
    how can i find out if it is something to do with software or it is problem with i pod touch 1stg if it is software problem apple need to fix it or give me some money back.
    i have wrote about this before and some people have e mailed me over this but i can not mail them back because when i e mail them i get pop 3 failier
    any got anyinfo about this or any fix it updates coming
                                                                                     thanks slobber

    Do the filenames contain special characters, like "ä,ü,..." or white space or are the vry long? Is there anything special about the image format? Try to export the edited versions in that case and reimport it with a different, shorter filename.
    For testing, create a new book with only the images you want to check.
    If this does not fix it, try rebuilding. Depress the option and command keys, launch iPhoto and rebuild the library.

  • Problems with the condition for a switch in our IntegrationProcess

    Hi,
    we're relatively new in using the XI-IntegrationBuilder and we have a small problem.
    We try to define a switch-condition to perform two different Transformations depending on a specific value of a message element.
    The condition looks like this:
    (IncomingRequest./p1:MT_XI_REQUEST/status = donormal)
    Both 'sides' of the condition are of the type (xsd:string).
    But it seems the condition is not working in the right way.
    It always uses the Transformation 'merge' (pls see image of IntegrationProcess->here the Transformation is shown as 'me').
    <a href="http://www.edwebservice.de/uploads/a1a956a10f.jpg">Image of sampleprocess</a> (this is only a testprocess to show  what we want to do)
    For testing we already run the process without the switch (making it linear), by using each transformation occurring in the switch on its own. Both tests worked well and returned the expected different values. But as mentioned above when we're using both Transformations in the switch, always the Transformation 'merge' is performed.
    It does NOT matter if the Transformation 'merge' is placed in the 'if' or in the 'otherwise' branch. It does NOT matter what value (true/false) the condition should return.
    Maybe its a basic desing-problem of our process? 
    <b>Any suggestions will be appreciated</b>
    Regards!
    Georg
    Our systemenvironment:
    Runtime
    Java version:1.5.0_01
    Java vendor:Sun Microsystems Inc.
    Version
    Service pack:15
    Release:NW04_15_REL
    Latest change:15767
    Sync time:200603080654
    ps: we already checked the OSS note 890760 for resolution. but this didn't solve the problem.

    Hi!
    @Peter:
    1) the namspaces are the same. we ckecked it already.
    2) status is an element NOT an attribute
    3) it is the same value (no blanks etc.)
    we will try to run XI with 1.4.2
    @Udo:
    We know how to use XPath a litte bit and were to customize an expression in the conditioneditor. We only thought that you could mean a 'special functionality' of XI
    Thanks for your ideas so far!
    Regards!
    Georg

Maybe you are looking for