Problem with the the file sharing

I have iTunes version 11.0.2 nad I can't find the file sharing, I tried to look for it in Apps but I couldn't find it.
Please help me.

Hi Patrick,
It seems I have to enable body manage property to be searchable and increase the maxindexsize to higher value.
I assume that this body field is used to store the content of the document, right?
I am wonder that why the default value of searchable of body manage property is set to False.
Best Regards,
Andy

Similar Messages

Error: There is a problem with the file and it cannot be copied

I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

There seems to be a problem with the file download. For troubleshooting tips, please visit our customer support page

There seems to be a problem with the file download. For troubleshooting tips, please visit our customer support page.

Thank you for the update Dlawrenceusa. I would recommend reviewing the installation logs for the updates that are failing to apply to determine the exact cause of the failure. You can find details on how to locate and interpret the installation log files at Creative Cloud Help / Troubleshoot install issues with log files | CC. You are welcome to post any specific error messages you discover to this discussion.

I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205)

I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205) please help

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Hi i am trying to open a pdf but " preview " is saying that the file cannot be opened or that there is a problem with the file - what do i do? :-)

hi i am trying to open a pdf but " preview " is saying that the file cannot be opened or that there is a problem with the file - what do i do? :-)

Try opening the file using Adobe Reader.
Clinton

"Performance" problems with the File adapter on Plain J2SE Adapter Engine

Hi,
At the moment I'm on a customer side to solve some XI issues for a few days. One of the issues is the performance of the Plain J2SE Adapter Engine, using the file adapter to transfer XML messages(already XI message format) from the legacy system to the Integration Engine. The File adapter has to deal with "large" XML messages(max at the moment is 65 Mb) and the engine fails with the following error when transferring the big XML file: "ERROR: Finished sending to Integration Engine with error "java.lang.OutOfMemoryError". Skip confirmation and quit this loop".
As far I got the information from the customer the memory use of the Plain adapter engine is set to 512Mb. This is maybe to low. But I don't know where to look for this, I only have the adapter web interface in front of me, no access to the OS it self via for example remote connection.
On the Integration Engine I know there is the ability to split large message with the file adapter(File Content Conversion), but I don't know this for the Plain Adapter Engine. Is there a possibility to do this also on the Plain Adapter Engine?
Thanks in advance for any input.
Greetings,
Patrick

Hi Sameer,
Thanks for your answers.
On the first solution, yes that is possible, we first decided to see if the legacy system can do the splitting, before starting developing a Java program.
On the second solution, as far as I know is this solution possible on the Integration Engine. But we are facing the problems on the Plain J2SE Adapter Engine. I went trough that documentation(link:
http://help.sap.com/saphelp_nw04/helpdata/en/6f/246b3de666930fe10000000a114084/frameset.htm ), to look for I similiar solution in the Plain Adapter Engine. So my question is, is this possible with the Plain Adapter? And if so, what kind of parameters I need to use to achieve this.
Regards,
Patrick

File cannot be opened because there are problem with the files

Hi
My program reads the data from file uploaded into SharePoint 2010 and massage with the list information. It finally creates a new document and prompt the end user to save it. When user opens the saved document it consecutively prompts with the below two message
How to turn off this warning messages? When I re-save this document with different name and open it again (any number of times) then the above messages
stops prompting. I want these messages should not appear even in first time as well. I tried to add these document on trusted location and also removed the protection settings but it does not help. Is there any setting requires to suppress these warning messages?
Any help will be greatly appreciated.
Best Regards,
Imran

Hi Imran,
your document is damaged. Pls try opening new and fresh documents
http://social.technet.microsoft.com/Forums/sharepoint/en-US/921c57a4-6120-419d-a612-07d4826eebcb/the-file-cannot-be-opened-because-there-are-problems-with-its-contents?forum=word
Please remember to click 'Mark as Answer' on the answer if it helps you

Problem with the file /proc/sys/kernel/hotplug which is incorrect

Hello,
Since few days, I can't import photos from my camera with my user (that work in root), I open a thread in this forum (http://bbs.archlinux.org/viewtopic.php?pid=348659).
After investigations, the problem come from the content of the file /proc/sys/kernel/hotplug which is just :
-e
When I run the start_udev script, the content of /proc/sys/kernel/hotplug change and importing photos with my user work again.
I isolate the only important line for my problem :
echo -e '\000\000\000\000' > /proc/sys/kernel/hotplug
When I run this line after a boot, the import file from camera work.
I think that the content of the file is bas setted while the udev starting or replaced by another event which occurs later !
I use the x86 version up-to-date with kdemod.
Someone have an idea of why the content of /proc/sys/kernel/hotplug (it must contain an executable for kernel call on hotplugging) is bad ?
Last edited by tuxom (2008-03-30 13:31:14)

I think I've found the problem, see my comment in http://bugs.archlinux.org/task/9935. Thanks for the information about /proc/sys/kernel/hotplug!

Problems with the File System Repository & User Mapping!

Hi All
I am having a problem with a file system repository, and setting up user mapping for that repository.
I have done the following:
Created a File System Repository
Created a Network Path
Created a System (Including the alias)
Now when I go into User Administration and select my user the is no user mapped systems to select.
All this system is doing is connecering to a folder on our File System.
Any help would be great as this is really frustrating!
Thanks
Phil

I am using EP7 Stack 11 and unfortunately the only options I have are:
user
admin
admin,user
It is currently set to admin, user and does not seem to work!
Phil
Message was edited by:
Phil Wade

Problems with SMB and file sharing in Lion

I have an HP OfficeJet 8500 Premier that is only 2 years old. One of the things I loved about it was the ability to scan documents to a folder on my Mac. Unfortunately, the only filesharing HP supports is SMB. In SnowLeopard, SMB worked great (as long as SMB was set up in "Sharing").
Now, however, I cannot connect my HP printer/scanner to my Mac via SMB. I have rebooted my Mac, rebooted my printer, turned on then off the SMB sharing, tried to re-setup the scan-to folder on my printer...all to no avail.
One other oddity--when I try to turn off my SMB account (my login account) in sharing, it won't let me. It asks for a password then unchecks the account briefly, then re-checks the account (leaving it on). I have the opposite problem on my MBP--when I try to turn on SMB sharing and select the account, it asks for a password and briefly checks the account box, then un-checks it.
Anyone have any solutions for getting an HP printer/scanner to Scan-to a Mac running 10.7?
Thanks,
T.

Chih,
I also have a Xerox 6180 MFP that stopped connecting to a Lion Server machine via SMB, but I was able to come up with a workaround using FTP:
Although Lion Server's GUI doesn't have a service switch for FTP, it still exists and can be turned on via command line.
This is the workflow: Everyone at my office shares the Xerox 6180 scanner, so I created individual scan bins in the Xerox Directory for every user. A user would select their scan bin on the Xerox 6180 (Scan > Server > Scan to... Richard's Scan Bin) and make their scan. The Xerox 6180 FTPs the file to a Mac Mini running Lion Server. The user goes back to their workstation, logs into the server via AFP, and grabs the file out of their private scan bin.
My workaround on OSX Lion Server:
1.) I already had a "xerox" user in a group called "scangroup" via the Server.app. This user is for the Xerox 6180.
2.) In Terminal.app, I created an ftp access group called "com.apple.access_ftp":
   sudo dseditgroup -o create com.apple.access_ftp
3.) Then I added my "scangroup" group to "com.apple.access_ftp":
   sudo dseditgroup -o edit -a scangroup -t group com.apple.access_ftp
4.) Next, I turned on FTP:
   sudo launchctl load -w /System/Library/LaunchDaemons/ftp.plist
5.) In the "xerox" user's home folder, I created a directory called "Scans" and sharepoint subdirectories in it for each Shared User account (e.g. ~/Scans/Richard's Scan Bin)
6.) In Server.app, I gave each Shared User read/write permission to only their subdirectory (i.e. The shared user "Richard" has read/write permission for "Richard's Scan Bin" folder)
7.) In the Xerox Server Address Book Directory, I created entries for each user. i.e.:
   Name: Richard's Scans
   Server Type: FTP
   Server Address: [Your server's address]
   Port Number: 21
   Login Name: xerox
   Login PW: [your password]
   Server Path: Scans/Richard's Scans
You can also tweak my workaround if you aren't using Lion Server.
Hope this helps!

A problem with the File adapter receiver

Hi people,
In the Integration Monitoring the system represent this problem:
File adapter receiver channel Mainframe_FA_StructureAch_CC_RC is not initialized. Unable to proceed: null
Any body can help me!!
Thanks!!

Hi ,
Just check is it Activated ? Go to RWB->Adapter Monitoring
Check the status there ..
To more- Go to service market place to view the Adapter Monitoring PDF
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
Hope this helps.
Regards,
Moorthy

Photoshop CS5-Could not complete your request because of a problem with the file-format module interface.

When I always try to open a picture, a pop-up always open displaying the said message. What will I gonna do? Help, please!

Without proper system information and other details like what pictures you are trying to open from which storage locations nobody can tell you much.
Mylenium

I am using Firefox 3.6.12 and it won't allow me to store any bookmarks and I can't go back. Any idea if there is a problem with the settings?

This problem suddenly started happening, it wasn't when I installed an update of Firefox. I can use other search engines ok (safari etc.) I have also unistalled Firefox then re-installed and the same problem still occurs.

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Problem with the config.xml

Dear all,
After doing a wscompile on the config.xml file (JWSDP1.6), I am able to generate the wsdl for the interface defined.
But now the config.xml shows an error
"Cannot find the declaration of element 'configuration' "
for the attribute xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config"
Any idea what is the problem as "http://java.sun.com/xml/ns/jax-rpc/ri/config" is no longer available on the sun site.
Any alternate references to be made to this xml namespace declaration.
Rgds,
Seetesh

My point above is that Project 2007 was extremely buggy and unless files are saved using Project 2007 SP3 first you are likely to experience problems with the files when opening in project 2010. Project 2007 to 2010 with no service packs is problematic.
With SPs applied you should have far fewer problems.
Doesn't look like a exe with SP2 is available yet so you need to add the service pack separately, probably in the updates folder.
If all Project 2007 installs are already at SP3 then no need for this.
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz

Is there a problem with the new aperture update ?

Hi,
Got the lastest update for aperture and just opened up some recent photos in aperture and it looked like missing pixels in the picture. Some of the pictures, distortion of pixels was terrible. At first I thought my new Macbook pro screen was faulty. It was the third time today that I was looking at the same pictures and I knew there was no problem with the file and then I remembered the aperture update. I opened the same pictures with iphoto and then set the photos as desktop pictures and they came out perfect.
Has anyone else had the same problems after the update ?
Thanks.

Hi, welcome to the forum
Sometimes these issues are user related, but not always.. I agree with Allan that you need to let Aperture finish its tasks.
Here is a link to an article that you can work through to see if you can resolve your specific problem....... http://support.apple.com/kb/HT3805
This will step you through some issues and hopefully help you resolve your problem.
Regards....... Gerry..

Problem with SP 15 (File-Adapter etc.)

Hallo,
has anybody face to problems with sp 15? It may be a problem with the file-adapter. Whats yours experiences with sp 15?
Thanks in advance,
Frank

Hi Frank,
I am not sure about the issues with SP15, but Michal's Frequently Asked Questions blog talks about what to do if your adapters are not shown after an upgrade to some SP. Just check it out,
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Question 3 under Adapters,
I can't see my adapters in the adater monitoring after the import of a new SP
a) try reimporting "SAP Basis software component"
b) take a look at the XI installation guide on how to do it: "Importing the XI Content for Software Component Version SAP Basis 6.40"
Regards,
Bhavesh

Problem with the the file sharing

Similar Messages

Maybe you are looking for