Problem with the Time Setting

Hi,
I am facing a strange problem with solution manager 3.1.
In solution graphic , its showing the refresh Time perfect but for alerts it is giving some very odd timings, sometimes well ahead in the day . .
We are running on Windows.
Anyone who has faced this problem .
Regards
Vijay

That means it is having trouble connecting to the network. Make sure location is set correctly. Go to settings - general - network and ensure DNS is set to automatic. Check that your router is up to date. If on wifi try Ethernet.

Similar Messages

  • Problems with the time setting. help please

    i have the time set on my ipod touch by the city i live. the time will be right for a couple days, but then it becomes an hour behind. how does that happen or how can i make that not happen?
    can anyone please help me?

    I'm having same problem too.  Has happened 3-4 times now.  Can't figure out what causes the time to change to random time. At one point I thought it was caused by my leaving my calendar at a previous date or appointment, but really don't think so.  I have a Verizon - iphone 5.  I would think that the time would come from Verizon. Not Apple.  But no one else is talking about it.  Anyway, you're not alone )c:   Turning it off and then back on is fine HOWEVER, last night it changed time to 2 or 3 hours EARLIER so my alarms were screwed up!  I asked Siri "what time is it" and she must get her information from the iphone settings. So... she gave me the WRONG time also.  Sad.  1st time it happened, it was actually Sunday 8:03 AM PST and iphone showed 11:38PM.   This morning, not only was the time wrong, the date was  last Tuesday, 9/26/12!  Not funny when we all depend on our calendars and appointments that are set on each day.   Other times, I just reset it and will wait for someone to fix the problem.  I love the iphone 5 though!  Nice and light (I'm a runner). It replaced a 4. Loved that one too, but new iOS6 is WAY FASTER!  Love it to pieces! 

  • Problem with the fullscreen setting in Mountain lion

    Hi, I am experiencing a problem with the full screen setting of my Mountain Lion. The trouble is that when I run certain apps such as Zotero or Scrivener and I open, say, the preferences window, this is automatically set in fullscreen, although it should not be. I have already got in contact with the Scrivener team and they suggested that was a problem related to one of the apps I use to manage my windows, i.e. RIghtzoom and Window Tidy. Following up this suggestion I uninstalled and restarted my laptop, but nothing has changed. I wonder if anyone has already experienced this problem or if you have any suggestions. Thanks.
    Alfredo

    Here a short video which shows the problem I am talking about
    https://www.youtube.com/watch?v=_JGEis-vvsc
    Any suggestion?

  • HT201272 Problems with The Times app for iphone

    I have purchased an iphone app for The Times through itunes at a cost of £9.99 for 30 days.  Over 2 weeks has passed and I still don't have full access to the app.  Sometimes I can log-in and it works, but every day there are times when I cannot log-in.  When I try to log-in, the app says my subscription has expired.  I type in my email address and password, and it doesn't accept it (a message says I should email The Times helpdesk).  I contacted The Times helpdesk, and they told me that it was a problem with itunes.  I would like to understand what the problem is, and why isn't the app working?

    kellihammer wrote:
    havent heard a thing from them
    Tried any of these steps?
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.

  • Problem with the time zone

    I live in Australia, but my hole family lives in Venezuela, I want to know how I can create an event using iCalendar but using the time support from Venezuela, without changing my time zone, for example when someone is on his birthday I want to receive an alert when it's 9 a.m in Venezuela not i Australia .. Thanks guys!

    I think you are all missing the point. java.util.Date objects always alway always store the date as the number of milliseconds since 1/1/1970 UTC so the only TimeZone they have its the implicit UTC. When you use the Date.toString() method the toString() method gets the default time zone from your environment and formats the data accordingly. This means that the same Date object will, by default, produce a different result for France and Australia and the US.
    So, if you have the date "12/5/2009" as a String then to convert it to a java.util.Date you must specify what TimeZone is implied. If it is your system time zone then you can just create a SimpleDateFormat object with the correct format and then use the parse() method to create the java.util.Date object and this will automatically be converted to UTC. If the date String represents some other time zone then you must explicitly set the time zone of the SimpleDateFormat object before parsing the string.
    The same approach applies when converting a java.util.Date object to a String. If you want anything other than your system time zone then you must explicitly tell the SimpleDateFormat what time zone you want the result formatted for.

  • Problems with the time limit in PCI6602

    Hi,
         I am using a counter-timer PCI-6602 to scan a sample.
        I’m using Counter0  as a pulse generator to generate a GATE signal and Counter1 as a counter, and the mode is event counting.
    J'd like to have a more precise definition about "time limit". If I used a GATE frecuency of 1KHz (1ms integration time) and a SOURCE frecuency of 10KHz with a time limit of 1sec, I measured1000 times a 10. That’s OK but that also means that I need to be 1 sec at each position!!!! And this is a lot of time!!! If I changed the time limit form 1sec to a fraction of a sec (300 ms for example) it doesn’t work. Why?
    Could anybody help me! Thanks,
    Lala

    Lala,
    What exactly do you mean by "I need to be 1 sec at each position"? Are you trying to interface with quadrature encoders? It is possible to perform a buffered period measurement which will sample the position once per second (hardware-timed). It also sounds like you are using Traditional NI-DAQ. Would it be possible to upgrade to NI-DAQmx? This API is recommended for new designs. Also, are you using LabVIEW or a text-based language. In the LabVIEW Example Finder (Help->Find Examples), search under "Hardware Input and Output->DAQmx->Counter Measurements->Position" for the Meas Angular Position-Buffered-Cont-Ext Clk.vi example. You can also use another counter to clock this buffered measurement. If this does not sound like what you are trying to accomplish, please let me know a bit more about your hardware and what you intend to do with it. I'm sure I could then recommend a better method.
    Hope this helps,
    Ryan Verret
    Product Marketing Engineer
    Signal Generators
    National Instruments

  • Problem with the display setting

    I havn't used my iPod sence yesterday, when the display was fine. Sence then it hasnt been touched, but when I turned it on and played a song, all i could see was the album cover art, now i've been messing around with the settings for about 30 min, and I dont get anything, but maybe theirs some obvious setting I'm missing.
    The songs play fine, the volume works fine, i just cant see anything but the album cover.
    Any suggestions?
    PS: i just got this a few days ago, so please be as detailed in your answer as possible.

    no problem

  • Problem with the EQ setting for the music app

    I have an iPhone 6. Whenever I listen to music on my iPhone, I set the equalizer (EQ) in the settings app to Rock. However, whenever I stop playing music, and then begin playing music again a little while later, the EQ has reset itself to "Off". I am constantly having to go back to Settings to reset the EQ. Is there something I can do to stop the phone from the EQ by itself?

    Here a short video which shows the problem I am talking about
    https://www.youtube.com/watch?v=_JGEis-vvsc
    Any suggestion?

  • I can make calls and send text messages on my new iPhone 5, but incoming calls and texts still go to my old (non-Apple) phone. Is this a problem with the phone set up, or is it a problem with my old carrier or my new carrier?

    I can make calls and send texts on my new iPhone 5,  but all incoming calls and texts are received by my old (non-Apple) phone.

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Problems with the Time Control

    well whenever I choose "play" it will play but then stop and say:
    Fps: 27.4/29.97 (Not Realtime)
    Even though I have "Auto" selected on Frame Rate..When I try to RAM Preview I have to continuously click it for it to finish because it just stops..
    I know this might sound like an odd problem but I've tried everything.
    OS: Windows
    Vista
    Laptop
    32-bit
    894 MB Ram
    AMD Athlon 64 X2 Dual-Core Processor TK -55 1.80GHz

    You don't have enough RAM to adequately run Vista, let alone After Effects. You should have a bare minimum of 1GB to use AE and expect RAM previews of anything more than a second or two. 2GB is real-world starting point.
    http://www.adobe.com/products/aftereffects/systemreqs/

  • Having problem with the apple tv, because it still setting date and time and dont finish w the activation

    having problem with the apple tv, because it still setting date and time and dont finish w the activation

    That means it is having trouble connecting to the network. Make sure location is set correctly. Go to settings - general - network and ensure DNS is set to automatic. Check that your router is up to date. If on wifi try Ethernet.

  • Problem with the "now playing"-function after timer sleep-mode

    At first: sorry for my english.
    I have the following problem with the Nano 6G: I set the timer of my iPod Nano to shut it down after a while of playing. When I turn it back on afterwards, the now-playing-button does not show the song that it played at last. Instead of that the nano is automatically set to shuffle mode which was not activated before and the now-playing-button will show any other song randomly.
    This does not happen when I switch it to sleep-mode with the button on the top, only when the sleepmode ist activated by the timer.
    Does anyone notice the same issue with his nano? How can I bring my nano to play the same song after the sleepmode, that it played before?

    Hey Ipaqman, that strange behavior of the Nano 6G annoys me for exactly the same reason: audiobook in bed + sleeptimer = losing the place. As You say, the 5G works better with that and I also hope that Apple takes notice of that issue and will solve it.
    Until that I got myself a "workaround". I create a new playlist on the device, with just the single audiobook in it, that is actually in use. This helps me finding back into it, as long as "now playing" will not work correctly with the sleeptimer.

  • Having just bought an iMac and set every thing up I have found that my IPad seems to run very slow. I have also just updated the IPad to OS 5.1 .Are these two things connected or is there a problem with the IPad

    Having just bought an iMac and set every thing up I have found that my IPad seems to run very slow. I have also just updated the IPad to OS 5.1 .Are these two things connected or is there a problem with the IPad

    Using the Mac with your iPad has nothing to do with the fact that the iPad is running slow. There could be any number of reasons why the iPad is now running slow.
    Have you tried a reset on the iPad?
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Problem with the new server UCS C220 for set IP to CIMC

    Hi
    We’ve a problem with the new server UCS C220.
    We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability.
    When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it never enters at the CIMC.
    Then, we configure our DHCP server and our switch, we connect the three gigabyte ports to our switch to give him an IP to the CIMC, so and then can enter via browser, but neither works.
    Note. The dedicated management NIC does not link, the other two ports do make link.
    What do you suggest to put an IP to CIMC and start installing our applications?
    regards

    You may have noticed that there is no DVD rom on the c220. What you need to do is:
    Login into the CIMC from your browser
    Luanch the KVM
    Insert the VMware DVD in your machines drive
    On the KVM pop up there should be a tab to mount the drive, after mounting it click on Macros and choose ctrl_alt+delete to restart.
    After the VMware OS installs press F2 to enter IP.
    Browse to the VMware ip to download the Vsphere client
    Open the Vsphere client, enter the ip of the vmware and the username will be root and no password if you did not set one.
    You can now upload OVA templates or manually create virtua machine from this enviroment.
    Hope this help

  • I want to set up the Time Machine and I would love to use the Time  Capsule but since I already have a wireless router I need suggestions on  what other external disks Apple could recommend to use with the Time Machine and  how to configure that disk

    I want to set up the Time Machine and I would love to use the Time
    Capsule but since I already have a wireless router I need suggestions on
    what other
    external disks Apple could recommend to use with the Time Machine and
    how to configure that disk.
    A complication that I need to resolve is the fact that I am using Vmware
    Fusion to be able to use Windows on my Mac. Now it seems that Time
    Machine is not backing up my files
    on that virtual Windows without additional configuration and my question
    is whether you can advise me here or whether this is only a matter for
    the Fusion virtual machine.

    If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
    You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas  series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
    Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
    TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
    You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it.

Maybe you are looking for