Problem with the Titler WIndow

Hello,
I don't know how it happened but the titler window is saparate in 2 windows : one with the title by it self and the other one with tools and buttons.
How is it possible to have only one window again ?
Thank you for your help and regards,
Daniel

Daniel,
Though I would expect it to be in Eddie's link, you only need to go to Window (in the Toolbar at the top of the GUI), choose Workspaces, and then choose one of the default Workspaces listed, or any Custom Workspaces that you might have created. Hint: once you get a Workspace set up the way you like it, do save it as a Custom Workspace. Can save a lot of time later. I have about a dozen, plus the ones that ship/install with PrPro and use them for different tasks.
Good luck,
Hunt

Similar Messages

  • When i open finder the windown is a completely blank grey box with the title "Window" as a header, and all my folders will not open when clicked

    when i open finder the windown is a completely blank grey box with the title "Window" as a header, and all my folders will not open when c
    the problem started when my computer screen broke from something falling on it, the screen was replaced but the people that fixed it for me told me there may be some hard disk issues when a problem like this happens, they ran their own checks and found nothing and i was given my laptop back, then when i tried to use it, i found this problem. everything else works fine.
    i have shutdown and re-started my computer multiple times and i have also re-started finder multiple times, both having no effect
    i have also done a few other things to find that my apple.com.finder.plist and apple.com.sidebar.plist are both missing, and are not re-creating themselves, i have found no way to bring them back either.
    any help would be greatly appreciated, thanks

    there is an app called daisydisk on mac app store which will help you see exactly where the memory is focused and consumed try using that app and see which folders are using more memory

  • Problem with the Finder window in Chrome

    Hello,
    I have a problem with my finder window in Chrome.
    Since the window isn't a separate window anymore, but stuck to the top of the webpage, my finder window is too big. I can't read the "Cancel" or "Send" (I have no idea what's supposed to be there in English but I assume it's something like "send" and "cancel") buttons. I have provided some images of the problem, even if I make the Chrome window as small as possible, the finder window still is too big for my screen. I can resize the finder window from lest to right, but not up or down, which is extremely irritating for me.
    If anyone can help me how I can solve this problem.
    Thanks!

    I found the solution on another thread...Here it is.
    "I was having the same problem.  I found a way to make it smaller.  First, I opened chrome and clicked the green button on the window to make chrome go into full screen.  Then I tried to save a file to make the finder window open in chrome. When it opened in full screen I could see the bottom of the window so I resized it to make it a little smaller.  Once I did this it remembered the size so now I can access the bottom buttons when I take it out of full screen mode. Hope this helps."
    Worked like a charm!

  • Problems with the Title Option in Adobe Premiere

    I am having a problem with this option because when it shows the title panel, it is very incomplete; it doesn't have as many option as it had before, such as color or shape options. It started happening when I tried to blur our somebody and pick an hoxigonal shape from the panel and a sign showed up saying that there was a problem and then the program would shut down and wouldn't open later on unless I restarted the computer. Now, it opening without any problem but the title panel is still very basic.

    What the other users have said is correct. Premiere captures through FireWire or through SDI/HDMI via a 3rd party solution.
    For your situation I would say the best bet is to connect you camera to your computer via USB or use a card reader and copy the entire directory to your hard drive and ingest into Premiere via Media Browser.
    If you Google 'how to make stop motion in premiere pro' there are tons of great tutorials.
    Best,
    Peter Garaway
    Adobe
    Premiere Pro

  • Is there a problem with the Itunes Windows Installer Programme?

    The reason I ask is because I had a perfectly working Itunes programme on my external hard drive, from which I then deleted all the double ups of songs I had and then could not gain auto. updates of the dsongs I wished to add to itunes.
    It said to reinstall Itunes, which I tried to do and since this time the installation stops when installing the registry components and the following message appears -
    There is a problem with the Windows Installer Package. A programme required for this to install could not be run. Comntact your support personall or package provider.
    Can anyone help please?
    Thank you in advance for any help forwarded
    MrG
    P.S. - Not that well versed in computer speak, so laymans terms welcomed.

    This message often relates to a problem with Apple software update.
    Go to Add remove programs and find Apple Software update. Try repairing it.
    Select Change>>repair.
    That probably will not work
    Then try uninstalling any instance you find of Apple Software update. That probably will not work either.
    Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program.
    http://support.microsoft.com/kb/290301/
    To run the program – All Programs>>Windows Install Cleanup
    Remove any instance you find of Apple software update with the cleanup utility.
    Download a fresh copy of the iTunes installer and save it on your desktop.
    http://www.apple.com/itunes/download/
    Restart your computer and try installing iTunes.

  • Problems with the System.Windows.Forms.Timer

    Hi All,
    Could some one help me please? I'm having a problem using the System.Windows.Forms.Timer inside an ItemEvent, the timer event just doesn't works...give a look in my code:
    private System.Windows.Forms.Timer myTimer = new System.Windows.Forms.Timer();
    if (pVal.FormUID.Equals("FrmTimer") && pVal.ItemUID.Equals("btnStartTimer") && (pVal.Before_Action.Equals(true)) && (pVal.EventType.Equals(SAPbouiCOM.BoEventTypes.et_CLICK)))
                myTimer .Interval = 1000;
                myTimer .Enabled = true;
                myTimer .Tick += new EventHandler(myTimer _Tick);
    void myTimer _Tick(object sender, EventArgs e)
                SBO_Application.MessageBox("Timer: " + DateTime.Now, 1, "OK", "", "");
    does someone have already tried to use the timer inside an itemevent, or could suggest another solution?
    thanks a lot...

    Hi Bruno,
    Unfortunately you cannot use a Forms.Timer without using a windows form (ie not a SBO form). Have you looked at the other 2 timer objects in .Net, the System.Timer.Timer and System.Threading.Timer? Here's a link to a web page that goes through the differences between each one:
    http://msdn.microsoft.com/msdnmag/issues/04/02/TimersinNET/
    Kind Regards,
    Owen

  • Problem with the preview window in Premiere Elements 10

    Hi guys,
    I have a question:
    I have a new PC (data follow) and Adobe Premiere Elements 10.
    My problem is that I see in the preview-window only one grey picture. The sound runs without problems! In other chats I red, that perhaps my graphic card is the reson of my problam. Is this thus? If so, how I can repair this?
    PC:
    AMD FX-8350 Eight Core Processor 4 GHrz
    NVIDIA GeForce GTX 750 Ti
    Do you need even more?
    What I have already tried:
    - Adobe Premiere Elements 10 anew inst.
    - Graphics drivers update
    - Check DirectX
    - Windows Media Player and QuickTimePlayer anew Inst.
    Already to many thanks for your help!!!!!
    lg
    Börni

    borni123
    What computer operating system is your Premiere Elements 10 to run on?
    You are involved in the Premiere Elements 10/NVIDIA GeForce issue whose full details (description and fix) are included
    in the Announcement at the top of this forum. Copy for your convenience below.
    You gave a lot of details but did not include the computer operating system. This information may be the key whether
    the known fix will work for you. The known fix requires roll back of the driver version to about May 2013. If your computer
    is Windows 8 or 8.1 64 bit, there may not be a driver old enough to resolve the issue. This may force you consider
    a Premiere Elements version other than 10 or a different video card/graphics card for your computer. This issue is
    specific for Premiere Elements 10 and the NVIDIA GeForce cards.
    Copy of Announcement at top of this forum....
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this
    applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary
    to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working
    Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is
    expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver
    roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    The following is the specific link in the above for determining what older NVIDIA GeForce GTX750Ti driver versions are
    available to you.
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    Please update us on your progress,
    Thank you.
    ATR

  • Problems with the latest Windows 7 Conexant HD Audio Drivers For WIndows 7

    Hi,
    I have a Toshiba Satellite P305-S8997E with the Conexant High Definition SmartAudio 211 speakers. I have recently upgraded with the Windows 7 32/64-bit audio drivers posted within the last week in the Drivers section, and have had a few problems with them. Namely that whenever I listen to music (and etc), the volume is fairly low, and even when the speaker AND media player (Foobar, FYI) volumes are cranked, they flucuate, and eventually end up being much lower than they should. Is there any fix to this? I recently downgraded to the last Vista 64-bit drivers for them and that has ended the volume problem, but it doesn't sound as good as it should to my ears. Any help is appreciated.
    Also, this computer is only about two months old, and this problem hasn't surfaced until very lately, so I doubt it's something like the speakers going out or anything.

    Windows 7 is still a PRE-RELEASE OS until the OFFICIAL release date of October 22nd.  Toshiba and other manufacturers are still working on their drivers and may not have fully functioning drivers until then.  My advice is be patient and wait for them to get all of the bugs out.
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • Does anyone have a problem with the code window not showing code?

    I am having a problem with this update where the code window is blank and where I cannot add anything/ The text does appears in the design or live window.
    I just use DW to format text that will go into Edge Animate.

    Hi,
    Are you getting this issue on all the files?
    Please share any screenshot.
    Regards,
    Devendra

  • Fixing problems with the Microsoft Windows Installer Cleanup Utility

    Sorry for the long subject. I am having what appear to be common problems with my acrobat reader for which the only solution appears to be using the microsoft windows installer cleanup thing.
    I have acheived downloading the utility to my desktop but when I try to run it I get an error message as follows:
    Across the top of the message it says 'WINDOWS SCRIPT HOST' and in the box it says:
    Script: C:\DOCUMEN~1\Karen\LOCAL~1\Temp\IXP000.TMP\StartMsi.vbs
    Line: 1
    Char: 1
    Error: The specified module could not be found
    Code: 800700E
    Source: (Null)
    Does anyone have any clues as to where I can go from here as I am stuck with a program I can neither use or uninstall, and a reascue plan that doesn't want to cooperate either. And please treat me like a 2 yr old with the technical stuff. Thanks. :-)
    Karen

    Can you try to download it again, perhaps to the C:\ drive rather than the Desktop? Delete the Desktop download, then open Windows Explorer, and run the installer from the C:\ drive.
    P.S. do you have administrative privileges on your system?

  • Problem with the home window

    hello,
     can you please help with the connection problem I am facing in my skype account. I am able to log in the account, but I am not able to interact with anyone due to my offline status in other's account. Moreover, there comes a error of "skype home unavailable". Also, I cant see other people present online.
    I have already checked in the options of staying online and staying connected. Everything is working. But still I am not able to detect the problem. Please help me.

    Is your connection status on Skype Online? The status icon must be solid green with a white checkmark inside. Try to change the status using the dropdown arrow next to this icon.

  • Problems with the Title

    I have problems in creating new titles. I did alreday a few titles but now it is not possible to create new ones.
    I can only press the button preview, but the update button is not active.

    Hello Galfi,
    the update button should only be active when selecting an already created title and thus trying to change it's settings. have you tried simply dragging and dropping the title in the desired location?
    hope this helps
    viva la mela

  • Problems with the latest windows installer?

    FMS *sigh* FML
    I am trying to get live streaming running on my windows 7 machine (as full admin; permissions shouldn't be an issue)
    - Windows install
    - No serial/Development server version
    - Yes Appache
    - Admin, password...
    - Default, default, default...ect, GO.
    Out of box, nothing worked - localhost just laughed at me with a blank ("could not connect") page and the FMS admin page was no better "Login attempt to the server below failed...etc".  Then I found that [root]/Apache2.2/conf/httpd.conf came straight from the installer like this
    # Please see httpd.conf.orig for the configuration of a default
    # (non-FMS) installation of apache.
    Listen 8134
    # If you plan to run FMS as root on linux, you _must_ specify a
    # valid user, with access to the FMS installation direction, or
    First off - Isn't that supposed to be set to 80?  Also, httpd.conf had no definition for ServerRoot - I am no apache expert (that cannot be overstated) but everytime i've used it, i've needed to define this.
    Anyway, I figured I had nothing to lose and so armed with essentially my mom's working knowledge of Apache's .conf schema, I went in and changed "Listen 80" and added a definition for ServerRoot, reset and...tada...finally, localhost would resolve to that FMS startup page.  But that doesn't mean much because I get a timeout/failure on the rtmp demo (sure the http demo works but who cares; ignf about http).  But that makes sense because the FMS admin page STILL can't connect to localhost (or localhost:1111 for that matter) so there was no server instance to connect to anyway...[Jason slumps; a broken man].
    Anyway - anyone have any insight?  Same problems += soultion?

    Hi,
    Thank you for trying FMS.
    Though you mentioned you have the admin access on your windows 7 machine, I still doubt the admin privileges are the cause of the problem for you. Let's take your issues one by one.
    After the FMS installation, the installer gives options to start the service automatically (few check boxes to select). But on Windows 7, that wont work straight away even though you are logged in as admin. What you need to do is to open a command prompt (with run as administrator). So, your command prompt is actually elevated with admin stuff. Now try to start the fms services as below :
    c:\> net start fms
    c:\> net start fmsadmin
    Once you get the successful messages, try to make connections, it should work.
    Next, the apache that comes along with FMS runs/listens on 8134 itself. Port 80 is taken over by the FMS processes (to be exact, the FMSEdge process) which will redirect all HTTP traffic to Apache on 8134 and all the RTMP traffic to itself (to be exact, to FMSCore process) and hence you can keep the 8134 intact.
    Once your services start correctly, there wont be any port conflict/problems.
    Please try and let us know if that helps.
    Thank you !

  • Problem with the Finder Window

    Ever since I updated to Mountain Lion, for some reason every time I open a Finder Window nothing shows up in the side pane such as the Applications, Documents, etc. It's just blank. But for some reason every now and then it actually does show up again. I have no idea what is causing this so if anyone has a solution it would be a great help.

    While in Finder, I suggest opening Preferences and choosing the Sidebar tab.  See what's there and change it to your liking.  Then report back if the results are inconsistent when you open Finder windows in the future.

  • OnScreen windows problems with the new MacBook Pro (see pictures)

    Hi Everyone,
    For the beginning, please excuse my bad english i am more fluent in french ...
    I have some problems with the onscreen windows (pictures = 1000 words !) :
    With explanation
    http://img17.imageshack.us/img17/425/captureecran001.png
    Without but same problem ...
    http://img806.imageshack.us/img806/1007/captureecran002.png
    http://img215.imageshack.us/img215/2059/captureecran003.png
    http://img839.imageshack.us/img839/8513/captureecran004.png
    Somebody have any ideas ?
    Thanks in advance
    MB

    So this only appears in advisory/confirmation windows and nowhere else, i.e. you never see it across documents or images or in other situations ?
    First suggestion is to try re-installing the latest 'combo' 10.6.6 updater and see if that changes anything.
    http://support.apple.com/downloads/DL1349/en_US/MacOSXUpdCombo10.6.6.dmg

Maybe you are looking for