Problem with the wifi acquisition
hello all,
Actually this problem is just screwing me from so many days.I have one wireless adapter(serial to wifi adapter) and using that adapter i had designed one wifi amplifier which will sense biosignals and transmit wirelessly...Ok.Now i started writing an application in labview (receiver ) so that whatever data wifi amplifier is sending i should receive and store in a file.For that purpose i am using TCP/IP vis of labview.But the problem is with the connection.Actually my labview program is configured as server and it waits for some client to connect whereas wifi amplifier is by default it is in client mode.Can anybody please tell where the problem is and please post any VI for the connection?
Thanks and regards,
srikrishna.
Hi muks,
Thank you very much for your reply...Actually in my application, i am not using any WLS carrier and NI C series modules.Just i have a wifi amplifier(we need to run some ATI commands for communication).I want to connect using normal TCP\IP vis.Can you please tell me how to do this?
Similar Messages
-
Does anyone else have problems with the wifi connection on their 4th generation Mine keeps going off line and its only 3 weeks old.I had the ipad mini and this problem never existed. I brought it back to the shop where i bought it Expert Laois last week and they said they couldnt find a problem but had to take it back today as it keeps disconneting from wifi still, anyway they are sending it back for repair and it am left with no ipad. After spending in excess of 700e i feel that this is really bad after sales service. I bought something that i want to use now and cant so what a waste of money it is .
Thankyou, but the shop said that they spoken to apple and that they have now changed their policy and that they do not give a replacement. So are you telling me that their information is false. Also what should they have done. This problem has existed since i bought it.????? What should i do?????
-
My apple Tv will not airplay, this is the 3rd one i have exchanged and my devices airplay just fine elsewhere, could there be a problem with the wifi even though all of the other functions are working fine?
Hello there, AntRambo.
The following Knowledge Base articles may provides some steps to go over for troubleshooting your issue:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
And also the following:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Particularly but not exclusively of note:
If the AirPlay icon doesn't appear
Ensure that you have followed the steps in using AirPlay and AirPlay Mirroring.
If you are still unable to see the AirPlay icon , try one of the following steps:
If trying to AirPlay, or AirPlay mirror, to your Apple TV, ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay.
Check Internet or network connectivity on all affected devices. Some content requires an Internet connection to authorize content playback. AirPlay capabilities may be limited if your network is not connected to the Internet.
If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information).
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro -
My iPhone 5 is experiencing problems with the Wifi at home. It shows that it is connected to the wifi but anything that uses wifi (apps etc) doesn't load content and just looks like it's loading forever but nothing ever comes. However the wifi and wifi/internet dependant apps work sometimes but it's rare. How do I fix this?
Back up all data.
Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
8.8.8.8
8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. Any difference?
Notes:
1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click Apply in order for any changes to take effect.
2. I don't use Google DNS myself, though I have tested it, and I'm not recommending it or any other DNS provider; the server addresses are offered merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist. -
I have a problem with the WiFi on my new 4th gen 32g Itouch.
I have a problem with the WiFi on my new 4th gen 32g Itouch. It is showing the bars and the wifi connection is showing that it is on but I can't get onto any of my apps that use the internet. Any suggestions as to what might be the problem? Thanks!
- Do other devices successfully connct to the same network?
- Does the iPod successfully connect to other networks?
Try :
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Powering off and then back on your router.
- Resetting network settings: Setings>General>Reset>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
I have an iPad MD371Y. Since when I installed the iOS 6 I'm fading problem with the WiFi connection. The line fall everytime the device go on automatic stand by (if i do not touch it for 5 min). Can somebody be of Help?
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
hello
I have an Iphone 3, but I had a problem with the wifi connection when I want to connect the wifi icon is gray and I can choose to access the wifiRead here:
http://support.apple.com/kb/ts1559
If nothing works, you most likely have a hardware issue. -
I just bought an iphone4 and is connected to my wifi at home but I can't bring anything up in the app store, itunes, etc. My husband has a droid 2 and he has no problems with the wifi? Any ideas?
If you look at the top left of your screen you will either see a 3G (or 4G if you have AT&T) or you will see the wi-fi symbol. If you don't see the wi-fi symbol you are connecting to Gmail through your cellular data plan, not via wi-fi.
To answer your question, it doesn't happen often but when it does the steps I mentioned above will normally resolve it. Hopefully you won't have any further problem with this. -
Hi, I have some problems with the connection to the wifi. I use a USB wifi pen from Belkin that uses the zd1211-firmware. I don't remember now the model but I think it isn't important because my wlan0 interface is recognized perfectly, I installed properly the firmware (although I think that it was installed yet) and in fact, i can connect to internet manually.
Always I'm connected to the same wifi connection then I don't need special configurations to laptops, but I want to use dhcp. Then, in /etc/rc.conf I added wlan0="dhcp", wlan_wlan0="wlan0 essid ... key s:..." and, of course, I added wlan0 to the list of interfaces.
The problem is that when I start the computer the connection fails and to connect I must do manually the next:
ifconfig wlan0 up
iwconfig wlan0 essid.... (the same thing I put on /etc/rc.conf)
dhcpcd wlan0
On one hand, I would like that internet works automatically (provisionally I add the three lines to rc.local)
On the other hand, I want that I can choice the internet connection graphically from the desktop environment (kde, in my case), since now it doesn't shows nothing about internet connection, it simply works because my trick on rc.local, and I can't choice another wifi connection if I would.
Thank you for your help.Wireless is not meant to be configured in rc.conf (which is documented in rc.conf itself if you have kept it up to date).
If you have just one network connection, install netcfg, it has plenty of sample configurations, among which one for WEP. -
Problems with the wifi in my iphone 4s
hello since I installed version 7.1 on my iphone 4s have problems with access to wifi, the wifi in my house automatically goes sometimes is not recognized by my iphone, what can I do? need help! Thank you! await a return
Bianca GarciaIf you've restored your phone as NEW and the problems persists, then you have a hardware failure. You'll need to bring your phone into Apple for evaluation and probable replacement.
-
i pod touch wifi works for few minutes then goes off seems lots of people having same problemsif it is a problem with latest software updates apple should put this right.
how can i find out if it is something to do with software or it is problem with i pod touch 1stg if it is software problem apple need to fix it or give me some money back.
i have wrote about this before and some people have e mailed me over this but i can not mail them back because when i e mail them i get pop 3 failier
any got anyinfo about this or any fix it updates coming
thanks slobberDo the filenames contain special characters, like "ä,ü,..." or white space or are the vry long? Is there anything special about the image format? Try to export the edited versions in that case and reimport it with a different, shorter filename.
For testing, create a new book with only the images you want to check.
If this does not fix it, try rebuilding. Depress the option and command keys, launch iPhoto and rebuild the library. -
Problems with the wifi from the iMac to the iPhone with iTunes
Hi all, I have a problem I can not solve ...
I have an iMac, and every time I open iTunes should sync my iphone into wi-fi, but it does not work, I have to connect it with the USB cable, but in the settings it says "Synchronize this conn iphone via wi-fi 'and c' is ticking ...
Please someone can explain, because I'm going crazy, and it was better ios 5 and os x Lion, everything worked like a charm!! ......
Sorry for the english ..
GiovanniWireless is not meant to be configured in rc.conf (which is documented in rc.conf itself if you have kept it up to date).
If you have just one network connection, install netcfg, it has plenty of sample configurations, among which one for WEP. -
I recently updated my phone software to iOS 6.1.3 and for the first couple of weeks, it was ok. but then until monday, the option to turn on the wi-fi has been greyed out so I can't turn my phone's wi-fi on which means I have to keep using my 3G coverage which will eventually cost me a fortune if I don't get the wi-fi greyed out problem sorted out as soon as possible. If anybody could help me with this problem (without having to take it apart or putting it into the freezer) please let me know as soon as possible.
Thanks
alexmac92 xI have seen a few searches that indicate some people have had success by changing their wifi security settings. Using none (not recommended) or using WPA2 with a strong pass phrase (longer than 8 characters) seems to work for everyone I've talked to. I've not had this issue myself on any of my devices (2 iPhone 4, 2 iPhone 5, 2 iPad 2, all running iOS 6.1.3, and 2 iPod Touch 3rd Gen running iOS 5.1.1), but then again, my home wifi has had a strong pasphrase, and WPA2 for 7-8 years now. I beleive that some people have had luck with performing a reset of network settings (but others have not, and claimed that it actually made things worse some how). Some have had luck performing a device restore in iTunes, while others have claimed that did nothing but cause them to lose everything.
I know there is so much wifi congestion in my neighborhood that it is hard to find a channel that doesn't already have 2-3 routers using it. It is possible that resetting your wifi router might help. I know that when my iPhone wouldn't connect to my wireless network, it would usually clear up if I restarted the router. -
Having a problem with the WiFI and the touch
Hi guys
First of all, I´d like to say that Im kinda an Apple rookie - this is my first ever Apple product ever, so I my knowledge is somewhere really low...
well, here goes... Happily i bought my new iPod in january stoked about all the cool features such as wifi, videos and so on. So there I was in a really good mood when I first got it up and running and found my 1st hotspot. (I had also bought the january software upgrade for mail and stuff) So then I tried loading a page in Safari and it gives me the message "Server cannot be found" - or something like that, you know - oh well I think, and try to open one of the other programs, but neither of those works... And yeah, Ive tried several networks but same results no matter where.
So, folks, do you have any idea of what could help me? Any help is appreciated!
by the way, in these months im housed in Ecuador - if that changes anything.
ThanksSometimes shutting the ipod down and restarting within the Wi-Fi hotspot works. (holding the on/off button for 5 seconds...)
Other times, i have found I had to go into the network settings on the ipod and toggle the DHCP settings a few times, or telling it to "Forget This Network" which will allow it to try to re-address itself on the network.
There are also some Wi-Fi hotspots that have wireless routers that are not so Mac-friendly... these will sometimes not provide an automatic IP address and must be manually changed to a static IP. If you can look at somebody else's laptop IP settings, usually you can manually configure the iPod touch to work with a fixed IP address that is a similar range to the laptops....
hope this helps. -
It was fine yesterday, this morning got up to do what I usally do, Shut down on me
Called Apple 3 times followed thier instructions (Wifi Troubleshhot and Connectivity) EVERYTHING now its garbage!
I know I can get a protection plan but my mom said thier was no need for one because of the price!
Ive tried updating it...It said it needed wifi!
Dont know! Feel screwd up at this point Can any one help me???!!! It is also a year old! Got it in January and It has not lived to its first birthday!!!:'(If you have not taken the iPod apart, Apple will exchange it for a refurbished one for $99. You can do it an an Apple store
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Or sent it to Apple
Maybe you are looking for
-
After upgrading to Yosemite I cannot download updates and the icons are not question marks.
I upgraded from Mavericks to Yosemite, I cannot download any updates for apps and cannot purchase apps. When I go to the app store all the icons are have question marks in them. Any ideas on what I can do to fix this problem?
-
Oracle 10.1.0.4 on Windows Server 2008 64 bits Standard
Hello, For migratiion purposes, we would need to install Oracle 10.1.4.0 on a Windows Server 2008 64 bits Standard, and then upgrade it to 11g. We have forced Oracle 10.2.0.4 installation on a Windows Server 2008 64 bits Standard, but we are not sure
-
AcroPDDoc in Windows Server 2008 R2
Simple line: Acrobat.AcroPDDoc pdfDoc = new Acrobat.AcroPDDoc() Works in Windows XP, but fails in AcroPDDoc in Windows Server 2008 R2. Is it a 64 bit issue? Or I am missing some installations? Any one delt with this problem? Returning error: Retrie
-
How can i creat several rectangles with one draw rect.vi
how can i creat several rectangles with one draw rect.vi? thanks Solved! Go to Solution.
-
Firewire drive cranking up CPU usage.
I've had this weird issue for some time (but never got around to asking.) Sometimes when my external FW drive is connected, the CPU usage seems to increase for no apparent reason. The fans crank up and the machine slows down to a crawl. Looking at th