Problem with the workbook after upgrade

Hi all,
We are facing some problems with the workbooks after BW 3.5 Upgrade.e.g. some templates are disturbed, some variables have been affected. So I have few doubts --
1. What could be the possible reason behind this?
2. What exactly got changed in the system which reflected this problems?
3. What other problems might have occurred which we may not have noticed?
4. How can I find out the number of workbooks affected due to this?

Dear ,
This is known issue:
Please implement the below mentioned note as this will solve your issue,
Note 1609237 :  Subsequent correction to 1567679
Regards,
Arvind

Similar Messages

  • Problem with the Clipboard after upgrade

    We had been using Intermedia, along with the Clipboard and WebAgent in Oracle 8.1.5. A few days ago we upgraded to 8.1.6 (I performed the Intermedia upgrade as well). Oracle is Installed on a Solaris 7 server.
    We installed everything into a new Oracle Home.
    The code we had written using the Intermedia procedures and packages still works but now the CLIPBOARD is not working. The ClipBoard and Web Agent are installed on an NT server running IIS
    Using the ClipBoard, when we we try to connect to the database we get the folliwng error:
    ORA-12564: TNS connect refused
    In the LISTENER.log on the server we see the following corresponding errors:
    26-APR-2000 09:18:16 * (CONNECT_DATA=(SID=cadv)(ORACLE_HOME=/u01/app/l1oradv/product/8.1.5)(SERVER=DEDICATED)(CID=(PROGRAM=C:\WINNT\System32\inetsrv\inetinfo.exe)(HOST=L10008016)(USER=IUSR_L10008016))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.27.
    125.68)(PORT=1206)) * establish * cadv * 1201
    TNS-01201: Listener cannot find executable /u01/app/l1oradv/product/8.1.5/bin/oracle for SID cadv
    The /u01 directory is the OLD Oracle home. I cannot figure out where the Clipboard is pulling that name from. I went through the tnsnames.ora on the client and the server and both point to the new Oracle home. I also went through the LISTENER.ora and there are no reference to the old Oracle home. On the NT Server where the Clipboard and Web Agent are installed I went through the wsc.cfg and everything looks good. There is no reference to the old Oracle home. I also verified the old listener is not running on the Solaris server.
    Where could this be buried? Everything else (DBA Studio, SQL*Plus worksheet) is working from the same NT Server running the Clipboard. I cannot find where the old Oracle home reference is coming from.
    Marilee

    Hi,
    The Clipboard uses the Web Agent to connect
    to the database, so it should be possible to
    track this down just using the web agent.
    The web agent itself is just a regular OCI
    client application - it doesn't do anything
    special when it comes to connecting to the
    database, it just uses the SERVICE attribute
    in the WSC.CFG file as a SQL*Net TNS service
    name in TNSNAMES.ORA. The first thing to try
    is to test the database agent being used by
    the clipboard from a browser. Eg:
    [URL=http://host/intermedia/<dbagent-NAME>/~test]http://host/intermedia/<dbagent-NAME>/~test[/URL] That should result in the same error message
    being logged by the listener and should also
    result in an error message being displayed
    on the browser window.
    To verify that the Web Agent is reading the
    correct TNSNAMES.ORA, you can create another
    database agent and include the entire
    connection string as the service name instead
    of using a TNS service name. This is probably
    best done by editing WSC.CFG, creating a new
    database agent by copying the existing one
    and replacing the service name with the
    connect string from TNSNAMES.ORA, making sure
    the string is all on 1 line. For example:
    [database_agent.sample-test]
    service = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = mypc)(PORT = 1521)) )(CONNECT_DATA = (SERVICE_NAME = orcl) ) )
    database_user = scott
    database_password = tiger
    authorized_request_class = retrieve
    authorized_sql_statements = procedures
    authorized_sql_procedures = *You can also verify the connection string
    using SQL/Plus. For example:
    sqlplus scott/tiger@"(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = mypc)(PORT = 1521)) )(CONNECT_DATA = (SERVICE_NAME = orcl) ) )"If the connection string works but the TNS
    service name doesn't, then I suspect that the
    web agent is looking at an old TNSNAMES.ORA
    file. If so, its because an old file exists
    in the PATH being used by IIS. Another
    possible, though much less likely problem is
    that there's an old OCI DLL and/or Oracle
    home in the PATH used by IIS.
    Simon

  • I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    You have to go to autherized iPhone agent.

  • Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

    There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
    I can not believe that Apple did not test this for major bugs like this one is.
    I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
    I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

    Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

    The latest flash player release is 11,0,1,152.
    Can you upgrade to this version and see whether the crash stil exists?
    Go to get.adobe.com/flashplayer to download and install flash player.
    In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
    saranlee wrote:
    My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows  which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

  • Problems with IMAQ Vision after upgrading from Labview 6i to Labview 6.1

    Hi,
    We just upgraded from Labview 6i to 6.1.To do this,we uninstalled the 6i version as was suggested by NI and then installed the 6.1 version.Later when we tried to run the old vi's written using Imaq vision, we ran into different problems.Has anyone experienced any similar problems with IMaq vision after upgrading?If so please help me solve this issue.
    Thanx
    deepak

    What kind of problems?
    I would strongly suggest that you uninstall IMAQ (all elements) and reinstall them. They register with Windows, probably docked to 6i, and also must be recompiled, which I believe is done in installation.
    This is your best bet.
    If you still have problems, contact NI and ni.com/ask and start a support inquiry.

  • My iphone 5s have problems with the battery to upgrade to IOS8, the problem is that low battery level quickly since I upgraded to IOS8.

    My iphone 5s have problems with the battery to upgrade to IOS8, the problem is that low battery level quickly since I upgraded to IOS8.

    recalibrate your battery.

  • Problem with SPAU Transports after Upgrade and after applying SAPKW70016

    Dear All,
    we copied old dev to new QA, upgraded new QA, then copied new QA to new DEV.
    did the SPAU adjustments in DEV.  At that time DEV SAP_BW version was SAPKW70015.  After that we applied SAPKW70016.  Now we're having problems with the SPAU transport because of the application of SAPKW70016. 
    Requested to kindly suggest ASAP.
    Thanks & Regards
    janardhan Kumar K

    Hi,
    Could you please to be more specific with the error ? Please check the log e send us the message error that is happening during the transport.
    Thanks,
    Walter Oliveira.

  • Problems with music app after upgrading to iOS 5

    i'm very particular with the organization of my ipod stuff. it has to have album art and it has to be properly sorted out by artist and album. after upgrading to iOS 5 i found several problems with the music app:
    1. some artists dont show on the artist section. i've tried fixing the album artist info, sorting info etc and nothing.
    2. some albums duplicate themselves in the albums section and it only gets cured if you delete a certain song in the album. if you try putting the song back the albums duplicate again.
    3. some album art dont show. i've tried plugging in the album cover directly to the song/s in the ipod, and deleting the song and recopying the song from itunes and still nothing.
    anyone care to weigh in?
    did i mess up the installation?

    I just spent hours trying to solve same (I have a iPod Touch 4th Gen) and I am very picky about its organization too. What I can tell you:
    1- The artists suddenly not showing in the artist section:  Double-check that their albums are not marked as "part of a compilation"... because I had 8 artists disappearing after the upgrade and all their albums were marked as "part of...". After removing that "compilation" tag, all 8 artists reappeared where they had been all along under the previous iOS, namely under the Artists category.
    2- I had an album that did not want the artwork to show. And each time I was able to transfer it back with the art, it would duplicate tracks on the iPod Touch. I finally was able to solve it by deleting manually from the iPod the album (by slowing dragging my finger to the right on the album title and click on the delete button when it appeared) then by deleting it also from the iTunes library and syncing. Then I reloaded the album in iTunes and resynced on the iPod Touch and the album reappeared without duplicates and with the artwork.
    3- Finally, one album was correct (track-wise) but no artwork. I double-checked everything and manually check the info for each track and 2 tracks had not artwork attached to it and a 3rd had 2 artworks. I manually attached the correct artwork to each track THEN to the whole album. Then I resynced and everything FINALLY worked fine.
    OUFF!

  • Problem with Java Script after upgrade from BW 3.5 to BI7

    Dear Colleagues,
    We're facing the issue with Java Script after upgrade of BW 3.5 to BI7.
    Just after update we checked the basic functionality and it occured that some of web templates that use Java Script don't work. They generate seelction screen, but after selection the screen becomes blank without any error messages.
    We're currently stucked since web templates weren't converted to BI7 version so they should work exactly as before the upgrade.
    We compared the Java code with other environment that was not upgraded - it's perfectly the same.
    The only explanation that comes to my mind is that some Java Script settings on the server level were changed during the upgrade but I have no idea where I can check that.
    Thanks in advance for any suggestions,
    Andrzej Bobula

    Hi Deepu,
    Thanks, it was great to read your reply and then few minutes later talk to you live on SDN Day!
    Unfortunately, http cache clean-up did not help. But there is another funny thing I found - for exactly the same 3.5 webtemplate html code returned from WebAS 3.5 was different then from 7.0.
    Unfortunately, this editor does not allow to paste complete code, even in CODE brackets, but here are main differences:
    <b>3.5</b>
       if (navigator.appName == "Microsoft Internet Explorer")
    <frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=1&REQUEST_NO=1&CMD=GET_TEMPLATE"
    name="Content">
    and
    <b>7.0</b>
       if (navigator.appName.indexOf("Microsoft Internet Explorer")!=-1)
    <frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=8&REQUEST_NO=0&CMD=GET_TEMPLATE"
    name="Content" 0nLoad="javascript:loadTitle()">
    (I intentionaly put 0 i/o o in 0nLoad, otherwise Forum's editor does not accept the text.
    How about SAP's claim that technical upgrade from 3.x to 7.0 changes nothing?
    Regards,
    Vitaliy

  • Problem with mp3 files after upgrading to iTunes 8.0

    I have the following problem in iTunes after installing the 8.0 version:
    I have noticed that certain (mp3 in this case) files do not play or download Album Cover from iTMS.
    These files were in normal condition at least 1 day ago, before the update and I can still find them in my iPhone which has not been sync since the iTunes update.
    Things I've done before posting:
    1. Checked the files that they still exist in their original location as they are set in iTunes preferences.
    2. Those files can be played either in Quick Time or in Finder Quick View (and Real Player and VLC).
    3. I have restored the mp3 files from Time Machine but no solution found.
    4. I have backed up and erased and created a new iTunes Library and tried to import them again on an empty library but nothing happened.
    5. The files existed in iTunes (without Artwork which they did have previously) but I could not play them (double-click etc). Then I removed them, I cannot add them again (either by 'Add to Library' or by drag-drop)
    6. Of course, I did a volume repair and permissions repair by booting from the OSX install DVD.
    (edit) 7. I moved the files on my MacBook Pro and tried to add them in the iTunes there (completely empty and different library). This also had no result...
    So after all these, the files are still not accepted in the iTunes but they still exist (and are playable) in my iPhone after yesterday's sync.
    Any ideas? because i'm running short atm
    Message was edited by: Periclesm

    Had the same problem with the new update. I finally got back to my previous version by using system restore. After the restore I had to go to the "All Programs" list and click on Quicktime and iTunes individually to allow them to re-configure, then had to restart the computer again. After that all's well. My lbrary was intact.
    I tried everything to get the newest version to work, including completely uninstalling my current versions of QT and iTunes, then downloading the latest directly from the Apple website, but, after 3 attempts, nothing worked. Guess I'll have to wait for the next update and try again.
    By the way, your library is not actually stored in iTunes--it is stored in your Music folder, so you should not lose anything by uninstalling iTunes if you need to.

  • Problems with the latest firmware upgrade

    I found a problem with the 01-10-2006 firmware upgrade. Now that it is inside my ipod certain videos don't play properly anymore. Actually the video starts, it plays normally for a while and then it goes still for a few seconds and then, when it plays again, the audio is gone.
    It always happens in the same point with the same video. In particular, just in case someone wants to try, it happens in the latest nasa video podcast.
    I don't know what to do!
    I'll try to step back to the 1.0 version...

    I'm having this problem as well. Sinse I updated the firmware all of my movies get stuck about every 10 seconds then if I wait a few seconds they start up again but with no audio. I'm quite certain that this is a problem with the firmware sinse the videos play fine on quicktime, they used to play fine in my ipod before I updated it, and I can get it to play the parts it gets stuck at if I rewind it but it happens very frequently and each time takes a while to reload. If anyone has found a way to solve this problem please let us know.

  • Dear i have a problem with the fingerprint after updating to ios 7.1 when plugged in electricity works like a charm

    dear sirs.
    i am an apple customer since first iphone but right now i am having problems with fingerprint sensor after updating to ios 7.1.
    when plugged to electricity it works but when unplugged sometimes work.
    please solve this issue by a quick update and thanks.

    I have been on the phone twice today with my carrier. They reset it the first time, it worked for an hour then messed up again. They reset it a SECOND time.. It worked for 6 hours, then messed up again. I don't know if this is a software issue or what but if ANYONE has any insight, I would appreciate it greatly.

  • Problem with Application Login after upgrading to Oracle 11g

    I have a home-grown application with Oracle 10g database running under Windows XP Pro. Recently, I installed Oracle 11g and imported the application database from 10g to 11g (still want to keep the 10g running for a while). However, I now having problem with the application logging into the new 11g database. (Keep getting invalid user/name message).
    BTW, I have no problem accessing the 11g database through SQLPlus (logging in with the same name and password that I use for the application), and the connection test of NetManager (again using the same name and password that I use for the application) was successful.
    The application itself uses the old Borland BDE (Borland Database Engine) to access the 10g and 11g database. Testing confirms that BDE can access Oracle 11g with no problems.
    Any idea about the probable cause(s) of the problem?
    Thanks in advance,
    sg2000

    11g by default is case sensitive username/password.
    You can disable that with setting parameter SEC_CASE_SENSITIVE_LOGON to false.
    SQL> SHOW PARAMETER SEC_CASE_SENSITIVE_LOGON
    SQL> ALTER SYSTEM SET SEC_CASE_SENSITIVE_LOGON = FALSE;

  • Problem with audio configuration after upgrading to iTunes 7.5

    After being forced to upgrade to iTunes 7.5 (when downloaded a new song form the Music Store), an error message is displayed when I launch the application, "ITunes cannot run becuase it has detected a problem with your audio configuration". The application exits immediately.

    Try the instructions in this article.
    (26574)

Maybe you are looking for