Problem with third party installer asking for restart

Hello,
I have a problem with software installers (not from AppStore) asking for restart (soundflower, M-Audio soundcard driver…). Gatekeeper is disabled, all is working perfectly but at the end I have a "l'installation a échoué" (installation failed) with a yellow triangle. I try to make a safe boot, make a new admin account, repair permissions… But no way!
It appends only with software installer asking for restart. Any idea?
Thank you

Yosemite and third party SSDs not friends. Do an Internet search for details.
I recommend that you consider reverting back to Mavericks or earlier if you wish to use your SSD.
Ciao.

Similar Messages

Does Mountain Lion checks for original hardware?? (problem with third-party ram)

Hi all,
I am wondering if Mountain Lion does a hardware check for original hardware. I did a RAM upgrade 6 months ago (from 2x2Gb to 2x4Gb Dolphin 1333Mhz DDR3 on a an early 2011 MacBook Pro) and everything went smooth, I really noticed the upgraded performance.
My problem started after a firmware update (I was running Mountain Leopard). The system became really unstable, with a lot of programs crashing randomly and some crash black screens. I then decided to update to Mountain Lion with a fresh install to solve all the problems and clean up my computer.
I did it from a bootable USB drive using Lion Disk Maker and following these instructions with the harddrive completely formatted: How To Make A Bootable Disk Or USB Drive Of OS X Mountain Lion. The installation got stuck half way through and exited without any error message. After checking the log I got an error code (FAILED TO VERIFY ESSENTIALS PACKAGE). After diggin for a couple of days I found out in an old apple support discussion (Failed To Verify Essentials Package On Installation) that the problem could be the non-original RAM. I then replaced the RAM with the original one and finally was able to install the new OS without problems.
After the OS install and setting up my usual programs, I decided to go back to the upgraded RAM for extra performance and the crashes came back as before. So the newer RAM clearly caused the system to become unstable. So right now I am using the original RAM, I want to get extra RAM but not sure if it was a sporadic problem or it will happen with all the third party memories. Going to the official tecnical service will cost me more than 130€ while buying a third party RAM is around 40€. Is it really Apple pushing us to get original parts or I am just unlucky? Did someone else experienced something similar?

Well, the upgraded RAM worked properly for 5 months straight. I don´t think it is a problem of dirt on the contacts or improper seating. Having the RAM not working properly the same day I want to update the OS, without touching it would be too much of a coincidence I think.
I am going to try the third party RAM again to be sure, trying to clean the contacts just in case, I will post the outcome later.

SerialVersionUID problem with third party class

Hello,
One of our projects is using java 6 (that won't change). We need to use some third party APIs which is developped using java 5, and I guess some wild rmi implementation.
If I try to use this api from a java 5 project, no problem.
If I try to use it from java 6, I got this exception.
Is there something I could try (workaround, something I can tell the api provider to fix, ...)?
"C:\Program Files\Java\jdk1.6.0_01\bin\javaw.exe" -client -classpath D:\dev\TestAde\Project1\classes;D:\dev\TestAde\Project1\lib\ADEAde.jar;D:\dev\TestAde\Project1\lib\ADEConfig.jar;D:\dev\TestAde\Project1\lib\ADEJDom.jar;D:\dev\TestAde\Project1\lib\ADEMisc.jar;D:\dev\TestAde\Project1\lib\ADEStubs.jar project1.Test
Exception in thread "main" java.lang.RuntimeException: Unable to connect to the server : java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.InvalidClassException: sun.rmi.server.UnicastRef; local class incompatible: stream classdesc serialVersionUID = -9213327104222131866, local class serialVersionUID = 8258372400816541186
at com.adesoft.config.ServerLocation.getRemoteConfig(Unknown Source)
at com.adesoft.config.ConfigManager.getRemote(Unknown Source)
at com.adesoft.config.ConfigManager.getProperty(Unknown Source)
at com.adesoft.login.WebSessions.<init>(Unknown Source)
at com.adesoft.login.WebSessions.getInstance(Unknown Source)
at com.adesoft.beans.SessionBean.setLogin(Unknown Source)
at project1.Test.main(Test.java:14)
Process exited with exit code 1.

The serialVersionUID of sun.rmi.server.UnicastRef in 1.5 is -9213327104222131866L. Strangely it isn't defined in the source code, just left to be calculated at runtime.
I recommend you first search all your JAR files on both client and server, apart from the Java rt.jar of course, for classes in java.rmi.* and sun.rmi.*. If you find any class in these packages, or indeed in sun.* or java.*, complain loudly to the supplier, and try deleting them.
If you don't find any such thing, I would then report this as a bug to Sun and I would also post it to the RMI-USERS mailing list where you will probably get a very rapid response.

Problems with third party package and file access

I am using a third party package that allows me to decode
multipart forms that I use to upload files to our server.
I have been able to write my own code (JSP) that both reads and
writes to our filesystem. However, when I try to upload a file
using the third party package the method I am using fails with
the following IO exception: The error message is "access is
denied." But the files get written and are usable (even binary
files). I have checked the directories and all the dirs I am
writing to have read, write and execute permission.
I have access to the code so when I duplicate the actual
methods used for writing (FileOutputStream.write(foo)) in my
JSP, it writes fine without exceptions. In fact, I use
FileOutputStream.write() in other code and it works fine. My
question is: why would FileOutputStream work in packages we have
developed and not in a third-party package. I have added the
codebase and filePermissions to <weblogic_home>\weblogic.policy
without any changes.
I am running WLS 5.1 and NT 4.0 with SP5.
Does this problem sound familiar to anyone?
thanks for any and all help,
saulj

HI Mike,
If you have third party Document Management System, then you can post two different message, i.e. service order in transaction details of the third party tool with link to document which would be posted to third party Document management server.
If you don't have third party document management system and what to use sap infrastructure, then you don't need to maintain attachment, maintain the link between the third party tool and SAP document repository, with some login utilities.
Best Regards,
Pratik Patel.
Reward with points if it is of any help to you!

Problems with third party software unable to maint...

Hi,
I have a problem with a software application that needs to be connected to a server on the web all the time. I get disconnects logged in its log file. It's worst in the evening up until about 11pm and then it improves markedly but during the weekdays its connectivity degrades again until the evening.
I have tried many things including taking my PC and connecting up to O2 broadband where these disconnects didn't happen at all. I think that BT is throttling my connection and causing packet loss that this software can't deal with.
I was looking at my BT account on bt.com and I discovered there is a usage meter. Up until now, I thought I had a flatrate deal however the usage meter tells me I've only got 10Gb for December and I've used half of it and it's only the 10th today.
I read in the Help section that if I exceed my limit I will get charged and BT will start restricting my connection. This is what I think is happening.
However the Help section also said I would be informed by email but I haven't received any emails regarding my usage. I have a suspicion that they may be being sent to a BT email address which I was allocated, but I set this account up 6 years ago and I now have no record of what the BT email would be.
How can I find out what my email address is and whether there are a pile of emails waiting for me to read? Am I likely to be right about the software connectivity problem and BT throttling my connection?
Thanks for any help!
Regards
Adam Hardy

Hi Guys,
thanks for your quick responses.
I don't have a record of an email from BT for 2004 when I set up my telephone & broadband. I do have an email saying that my BT.com login name is "[email protected]" (obviously not really) but nothing else.
In my files I have a letter saying the same thing with an account number, but no btinternet.com address.
I logged into MyBT and under the Broadband "Manage your services" there's a username which I am not familiar with and my telephone number.
I tried setting up an email account in Thunderbird to download any emails from mail.btinternet.com using that username but it asks me for a password which I leave blank and then it says "Error logging in. Please visit mail.yahoo.com". I also tried it with [email protected]
I just visited mail.yahoo.com which redirected me to https://register.btinternet.com/cgi-bin/respasswd1 but that form asks me for postcode, DOB and mother's maiden name and then tells me the info is wrong (which it's not - I even tried my old postcodes).
What is strange is that the username given "jsmith123" is not the username I use to log in here - see to the right - I think that must have been adopted by BT at some point later.
Any other advice?
Thanks!

Satus problem with Third party sales process

Hi Friends,
I have an issue with thrid party sales order processing
Step#1
My client runs the sales order for
Material Qty
p-100 10
p-101 10
p-102 10
step-2
Purchase requisition created and from vendor delivery happened
Step-3
My user created billing with reference of sales order for below material
Material quantity
p-100 20
p-101 10
p-102 20
step-4
user found mistake and he cancelled the invoice and created new billing document
for
material quantity
p-100 10
p-102 10
again he found mistake and cancelled this billing document and create one more billing document with reference of sales order
material quantity
p-100 10
p-101 10
p-102 10
now the issue is for p-100 and p-101 it showing being process and p-101 it showing status as completed
please suggest m

Dear Amar,
please see the billing document which you have cancelled and see the status of the item as well as you are saying,
that two items are cancelled, so i believe it is the sap functionality that it is showing the uncancelled item as complete.
also if the user has cancelled the whole document
kindly check all the documents again and then tell me
revert if helpful
Mohit Singh

Problem with 'third party email'

I've just switched to bt broadband in the last 48 hours. Since that time I have been trying to find the correct settings so that I can access my old freeserve email account using outlook. Unfortunately I only seem to be able to find information and settings linked to authentication with a bt yahoo account. This option is not available to me. The only account I can and have opened is a bt mail account. If there are definate instructions could somebody please tell me where they are?

thanks for link. Regret to say have looked at this a number of times. Setting up incoming and outgoing servers as per these instructions simply seems that on testing neither server responds and times out. The only way I have been able to get any form of activity is to set inocoming server to port 110 and outgoing server to 25 and not enable SSL. Using these settings I can get a successful test of both incoming and outgoing servers.
Problem that remains is that while I can recieve incoming mail ok any message I try to send simply sits in the outbox regardless of the test saying its good to go.

Problem with third party thunderbolt accessory

Hello!!
I am having an issue connecting my Blackmagic Design Intensity Shuttle Thunderbolt (analog to digital HD video transfer device) with my iMac (mid-2011) here are my specs:
Processor 2.8 GHz Intel Core i7
Memory 16 GB 1333 MHz DDR3
Serial Number D2*******HJT
Software OS X 10.8.4 (12E55)
In system profiler, I am able to see that the device is connected, however it does not appear in any applications' device lists that support the device. Here is my System profiler reading:
Thunderbolt Bus:
Vendor Name:          Apple Inc.
Device Name:          iMac
UID:          0x0001000A15B76CC0
Firmware Version:          25.1
Port:
Status:          Device connected
Link Status:          0x2
Port Micro Firmware Version:          2.1.3
Cable Firmware Version:          0.1.18
Cable Serial Number:          C4M2323018KDQ4KB4
Intensity Shuttle TB:
Vendor Name:          Blackmagic Design
Device Name:          Intensity Shuttle TB
Vendor ID:          0x4
Device ID:          0xA126
Device Revision:          0x1
UID:          0x00040000000C2AA0
Route String:          1
Firmware Version:          5.2
Port:
Status:          Device connected
Link Status:          0x2
Port Micro Firmware Version:          0.2.5
Cable Firmware Version:          0.1.18
Cable Serial Number:          C4M2323018KDQ4KB4
Does this info seem correct for a working connection?
Has anyone experienced a similar problem and/or can send some info my way for a possible fix?? I have tried resetting my SMC & PRAM and neither of those have worked, as well as uninstalling and reinstalling drivers for the device.
Please help!! I am dying to transfer videos onto my iMac!!!
<Edited By Host>

Are you using HDMI or Analog?
Any help here...
http://www.youtube.com/watch?v=p4TvnsR7YGA&feature=c4-overview-vl&list=PLB819CD1 81CAC7B2E
What Software are you using?

Best practices for apps integration with third party systems ?

Hi all
I would like to know if there is any document from oracle or from your own regarding best practices for apps integration with third party systems.
For example, in particular, let's say we need customization in a given module(ex:payables) need to provide data to a third party system, consider following:
outbound interface:
1)should third party system should be given with direct access to oracle database to access a particular payments data information table/view to look for data ?
2) should oracle create a file to third party system, so that it can read and do what it need to do?
inbound:
1) should third party should directly login and insert data into tables which holds response data?
2) again, should third party create file and oralce apps will pick up for further processing?
again, there could be lot of company specific scenarios like it has to be real time or not... etc...
How does companies make sure third party systems are not directly dipping into other systems (oracle apps/others), so that it will follow certain integration best practices.
how does enterprise architectute will play a role in this? can we apply SOA standards? should use request/reply using Tibco etc?
Many oracle apps implementations customizations are more or less directly interacting with third party systems by including code to login into respective third party systems and vice versa.
Let me your know if you have done differently and that would help oracle apps community.
thanks
rrb.

you want to send idoc to third party system (NONSAP).
what kind of system is it? can it handle http requests
or
can it handle webservice?
which version of R/3 you are using?
what is the mechanism the receiving system has, to receive data?
Regards
Raja

Third party installer and LabVIEW/VISA RT engines

I would like to use a third party installer (Q-Setup) for a stand-alone application I recently built using LabVIEW 7.1. The program was developed to run on Windows XP/2000/98 and requires serial communication with multiple devices. I realize LabVIEW and VISA RT Engines are required for this application, but am unsure if there will be issues with using a third party installer especially for builds across the different windows platforms (i.e., different RT engines for different platforms). The Application Builder provides options to 'silently' install the RT engines without problems, but I would really like to use a third-party installer. If anyone can provide some feedback about how best to include the RT engines using a third-party installer, I would greatly appreciate it. Thanks.

There are not different run-time engines for different versions of windows. Both the LabVIEW run-time, VISA serial only run-time, and regular VISA run-time engines are .msi (Microsoft installer) files that are available on your LabVIEW CDs. If the third-party installer can handle .msi files, you should be okay. One thing to mention, though. You said the app is for XP/2000/98. LabVIEW 7.1 is not supported for Windows 98 and neither the 7.1 run-time or application will install on 98. The last version of LabVIEW to support 98 was version 7.0.

Crystal Reports Addon asking for Restart problem

Hi,
I am using SAPB1 2005B PL 27.
i am using .Net 2.0
system is Windows 2003 Server R2 SP1
by using B1DE 2005,
I created addon for Crystal Reports Installation.
crystal reports are developed in Crystal Reports 10.
while installing,
1. Menus are adding perfectly
2. if i try to click the menu(means Report) , it is asking for Restart the Addon.
i installed the license perfectly. is there any Configuration problems?
plz help me asap.
Regards,
Anand.

It could be a problem with the code in your AddOn. Since you can see the menu's it an indication that the AddOn was started.
I suggest you to check your code. Also post the portion of the code to the SDK forum where development related topics are discussed.
Suda

TS3212 What does this mean, and how do you fix it? "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender."

What does this mean, and how do you fix it?
"There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender."
Trying to install iTunes 10.7, first attempt; downloaded and ran with everything closed, seccond atttempt; just click on run, third attempt; ran upgrade with iTunes open. All of the results were the same.
Is there something wrong with the iTunes 10.7 Windows installer package?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

WHen trying to install itunes the following error appears. There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package provided. Any help?

When trying to install itunes the following appears. There is a problem with this windows installer package. A program for this install to complete could not be run. Contact your support personnel or package vendor. Any help?

a colleague of mine suffers from the same problem. did a quick look on the apple support pages. found many topics covering the same problem.
also saw 1 marked as correct answer... (just browse the discussion pages before you ask, this answer appearantly was sitting there from oct. 14...)
(i'm not on windows, so i can't test...)
good luck!
j.
Correct Answer by Peter Lepere on Oct 14, 2011 3:07 AM
Hi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter

Interface for all cost object related transtions with third party system

Hello Guru's
I have one required for Functional Specications i.e, i need to create interface for all cost object related transtions with third party system for this purpose i need to create FS. any body please guide how to do..

Hi sreedhar royals
You need to check controlling tables you need to interact. (CSKS, COAS,....) then ask your abaper and project manager to guide you.
Regards

"There is a problem with this windows installer package A program required for this install to complete could not be run contact your personnel or package vendor".

I had itunes set up and working since i have had my iPhone and iPad. One day it asked to be updated, so i did. After it updated it stopped working because whenever i tried to open it it would say "this shortcut has either been deleted or moved would you like to delete this shortcut". This kept on happening so I uninstalled it and tried to reinstall it, but then comes my second problem. While itunes is downloading an error pops up saying "There is a problem with this windows installer package A program required for this install to complete could not be run contact your personnel or package vendor". This is my main problem and i don't know how to stop it i have tried a disc clean up, De frag and trying to completely take everything to do with itunes off my computer, but it still doesn’t work. HELP ME!!! I NEED ITUNES!!

Repair your Apple Software Update
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU in All Programs, go to Control Panel/Programs n Features(Win7 or Vista) or Add & Remove Programs(XP)

Problem with third party installer asking for restart

Similar Messages

Maybe you are looking for