Problem with this LIDAR program
This program is used to monitor LIDAR signal by a Transient Recorder.
When I set the strobe number of this program to larger than 1023, the signal that I get become very noisy, what is going on?
Please, any idea how to do it?
Phy_mechanic
Attachments:
HS-Track.llb 186 KB
Hi Kristen H.,
Sorry, I have make a mistake, the noise only appear above 1025. From the manual, it said that "The horizontal scale is given in bins. The number of displayed bins is controlled by the Strobe Number control. This number should not exceed the memory length of the transient recorder; for a TR-xx-80 this would be 8190 and for a TR-xx-1 60 16380 bins.” As the screen shot shown, when the strobe number excess 1025 the signal already very noisy (the strobe number not excess 8190 or 16380). So I don’t know what happen.
Thank you for your help!
Phy_mechanic
Similar Messages
-
I have attempted to upgrade my iPad which is necessar to downloan an app I want (My Radar). The iTunes on my computer will not process the upgrade of 10.5 without message: "There is a problem with this Windows Installer Package. A program run as part of the set up did not finish as expected. Contract your support personnel or packae vendor." ..... Little old lady needs help, my iTunes "appears to be 10.5 on my PC; however, will not upgrade my iPad. I have BitDefender as the "protector" on my PC if that is the issue.
Go to support.microsoft.com/fixit
In section 2 click on: Install or upgrade software or hardware
Then click on the title in section 3: Fix problems with programs that cannot be installed or uninstall
This link may get you there: http://support.microsoft.com/mats/Program_Install_and_Uninstall/
Let it run and then try to download it again -
I have Wondows Vista... I tried to upgrade to Itunes 10.5, and received an error orginially stating that I was trying to install a version older than the one I had. I uninstalled all of itunes, and now I'm getting the error message "there is a problem with this windows installer package. Aprogram required for this install to complete could not be run.
Help! I have an IPhone, and I would like to get my Itunes upgraded so I can download the new Iphone software...
Thanks!I have been in touch with Apple support in reference to my problem. We went through every solution available, and found no fix. The tech then suggested I contact Microsoft concerning this issue. I thought that suggestion was just to get me pointed somewhere but Apple. Boy was I wrong!! I contacted Microsoft, and was directed to a free download called Microsoft Fix. This program fixed something in the regisitor, and wala everything was fixed!! I now have I-Cloud and I-Tunes loaded and working well. So, if you can't install Apple Software and are running Window 7 you might give Microsoft Fix a try, it fixed my problem.....
-
I am trying to install itunes 10.5, but during the download I get the following message, "There is a problem with this Window Installer Package. A program required for this install to complete could not be run. Contact your support personanal or package vendor." If this is my personal computer and was able to upgrade to the previous version (pre 10.5), why not now? What is my "package vendor"? And what is it I need to do to fix this? The message is unclear. Unfortunately, I deleted my itunes program, thinking that in doing so, 10.5 would finally load. Now I have no itunes on my computer and unable to sync my iphone. Help!
Thanks - RickHi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter -
when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?
Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR, -
Not able to access Itunes store anymore. Just quit working for no reason. I've tried deleting Itunes and related components from the Control Panel, but when I try to remove Apple Software Update, I get a message that states "There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor". Not sure what this message means. Am I suppose to contact Apple ? What is meant by package vendor ?
Apparently it's an itunes issue. I just tried to update and got the same issue. Called att to activate my iphone 4s and they say they can do the swap but apple is telling them itunes is down atm. So will have to wait
-
5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
Hi,
I just try to install the setup download from apple website for iTune and iCloud.
During the installation, there was error message prompt out "There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I am using Window 7 32 bit. I have try several time for install, but the result is getting same error message.
Anyone can help on this??????
Thanks.
JustinI have also tried extracting the individual components to the temp file and attempting to install them individually despite being unable to remove the previous install of Apple Software Updater. The outcome, both Apple Software Updater and itunes encountered the same error message during the install process.
-
I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ?? I can't uninstall the Apple Software Update from my Control Panel. It states "Fatal error during installation" Please HELP!!!
I am experiencing the exact same issue during the installtion process for iTunes 10.5.
I uninstalled all Apple components but when I attempted to uninstall the Apple Software Update I received the same message: "Fatal error during installtion." I was able to repair the Apple Software Update but still could not install iTunes 10.5 afterwards.
I have tried everything that I could find on these discussions pages as well as other suggestions on third party sites. I continue to receive the error message: "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
I was able to uninstall and reinstall QuickTime 7.7.1. During the reinstalltion process I received the same message (There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) But after clicking "OK" the installtion process was succesful. PLEASE HELP! -
when I installed iTunes 10.6 to windows 7, during the process i got this message -" There is a problem with this windows installer package. A program required for this install to complete could not be run" and after that the setup closed automatically. Plaese tell me if any setting up of windows is in order.
Try looking at the two previous discussions listed on the right side of this page with your same question.
Also, try searching/posting in the iTunes forum since you do not have an iPod problem. -
I am trying to update my iPhone software but to do so I needed to update iTunes. When I try to do that, I keep getting this error message" "There is a problem with this Windows Installer Package. A program required for this install to complete could not....
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I am unable to install itunes 10,5. I receive this message: There is a problem with this window installer package. A program required for this install to complete could not run. Contact your support personnel or package vendor. I am using window 7 ultimate 64 bits
There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
what do i do when trying to install itunes to my windows vista home basic computer and a message appears saying
"There is a problem with this windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."
Need to know because this is driving me nuts now!Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I'm trying to install iTunes 10.3 on my PC (windows vista) and I keep getting this message, "There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I accidentally removed the Bonjour service from my system a few weeks ago, but my iTunes continued to work. Now I have no iTunes and I don't know how to fix it. SOMEONE PLEASE HELP!!!!
a colleague of mine suffers from the same problem. did a quick look on the apple support pages. found many topics covering the same problem.
also saw 1 marked as correct answer... (just browse the discussion pages before you ask, this answer appearantly was sitting there from oct. 14...)
(i'm not on windows, so i can't test...)
good luck!
j.
Correct Answer by Peter Lepere on Oct 14, 2011 3:07 AM
Hi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter -
I keep getting an error message that reads: There is a problems with this windows installer package A program required for this install to complete could not be run. Contact your support personnel or package vendor. How do I correct this problem. HELP !!!!!!!!!!!!!!
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows
Maybe you are looking for
-
Visa Read Timeout Occurs with multiple Reentrant VI Calls
I have written a test application in Labview (6.1) which will be used to test (burn-in) up to 15 serial instruments through a 16 Port USB->RS232 Hub. Here's how it works: When the App loads, I am transmitting a Connect command to each of 15 com ports
-
Hi Gurus, I have a table with a CLOB datatype column. While doing the export the table is not including in the .dmp file. Can any one tell me what will be the solution. Oracle Version: 10.2.0.1.0 OS Version: SunOS 5.10 Thanks in advance.....
-
Can a "missed payment" comment from 2005 be removed?
US Bank has one of my accounts from 2005 listed on my credit report as "5 late payments." The account has been paid and closed years ago, is there anything I can do about it?
-
Replication overwrites the AAA servers table in the secondary server
Hi, I've configured two ACS servers with replication but i noticed that when the replication takes place it overwrites the AAA servers table configured in the network configuration of the secondary server and that makes the next replication to fail b
-
"No Service" on a new iPhone 5? Here's another solution.
This may sound blindingly obvious to some, but there are no instructions to do this included with a new, shipped phone: you need to activate service through your carrier. If you are on AT&T, go to the AT&T Wireless website and enter a search for "act