Problem with time settings after daylight savings

Ever since the time was returned to normal from daylight savings time, the time on my Blackberry Pearl 8100 is out by one hour (1 hour slow). I set the correct timezone under Date/Time Options and set the Date/Time Source to 'off'. Also, the network time is 7 hours slow since I returned from an overseas trip recently. Can anyone please help?

Sounds like you may need the DST Patch installed on your phone. Go to www.blackberry.com/dst2007 on your device and follow the steps. It is very easy to do

Similar Messages

Problem with Time Capsule after backup session

I have a problem with Time Capsule after a backup session. Our two Macs (on Maverick) loose connection with the station and the only thing that seems to help is unplugging the Time Capsule and starting it again! After the next backup session the same thing happens again. The Macs seem not to be able to hold on to the connection and continually loose it. The iPhones and iPads that we have (4 units) are not affected - it is the Mac Mini and Mac Powerbook that experiences this problem!
I would be grateful for your help!
Thor

This is standard Mac issues and has been a bug floating around since Lion.. it hits some people worse than others.. but once it starts it is awful hard to get rid of.
Just to confirm the connection to internet is not a problem?? Just the hard disk drops out?
I recommend you
1. Reset the TC to factory.. and start over with all new names.. short, no spaces pure alphanumeric.
TC name and wireless name/s should conform. By default the disk share name is data which is fine.
2. Mavericks has changed over from using AFP to SMB for network filesharing.. why Apple why??
This is unhelpful to say the least. Many many people are struggling with TC and being unable to mount the network drive.
So do it manually and force it back to AFP.
In Finder use top menu, Go, Connect to Server.
Type AFP://TCname or TCIPaddress (it must be the network name of actual TC.. or its IP address)
When the computer locates the resource it will ask for a password.. it is public by default.. supply your password or public and save it in the keychain.
3. Delete the existing TM setup and start over.. See A4 here. http://pondini.org/TM/Troubleshooting.html
I cannot promise this will fix it but should reduce the problem to now and then.. rather than every time TM needs to backup.

Problem with Time Capsule after upgrading to firmware 7.6.1

I am currently using Time Capsule Firmware 7.6 and just upgraded to 7.6.1. After the upgrade, my IPad 2 cannot access iTune, App Store and Safari cannot access any web-site. Email and other Apps which require Internet access have no problem with connection. My other Apple devices like iPhone and Mac Pro have no problem with Internet access and can access App Store, and Safari can access web site as normal.
I tried to downgrade the Firmware back to 7.6. After the downgrade, iPad 2 can now access iTune and App Store. However, Internet access via Ipad 2 is very slow, at only 1M download and 0.2M upload Internet speed. The same issue occur with my other iPad 1 too. When I check Internet speed on iPhone 4 and Mac Pro, the result is normal, at 25M download internet speed.
Please let me know how I can resolve this problem.

I just read other discussion treads on Time Capsule Firmware upgrade to 7.6.1. It seems the whole community is having the same issue ie slow Internet connection speed and even some users are reporting unstable connection. If Apple is reading these treads, Apple should do something to either stop allowing the Firmware upgrade to 7.6.1 or rectify the issue with another Firmware upgrade without this problem.
If Apple has read and is not taking any action, then, we all should question what exactly is the management hired for?

Problems with time characteristics after migration to BI 7.0

Hi,
Our company migrated from BW 3.1 to BI 7.0 Netweaver 2004s recently.
After the migration we have problems with various time characteristics like 0CALMONTH, 0CALQUARTER, etc. in the Query Designer.
In the old BW3.1 Query Designer version we could choose at the properties of an time characteristic to display Key, Key and Text, Text and so on. After the migration to BI 7.0 we now can only choose Key.
The InfoObject definion of the time Characteristics in RSD1 is the same in the old version and in the new version.
I am very grateful vor every hint how i can show again the other display options in the properties, so that our powerusers can build their queries in the way they are use too.
Thanks
Ralph Nist

Hi Pom,
thanks for your answer, but we are on FEP 10 already.
So must be something else.
Cheers
Ralph
Message was edited by:
Ralph Nist

Problems with Time Capsule after upgrade to 10.7.5 & firmware on Time Capsule

I got a software update to 10.7.5.   There was also a firmware update to Time capsule. It won't work now. I get the error message of (-1). They tell me it's a Western Digital software driver. I never had a western digital drive, but must have migrated the driver from an older computer.      I did have an Iomega drive on that computer, but no Western Digital.
Support has not been able to help me.    Any suggestions?

I've worked on this over the weekend with Apple Support.   I'm now on my fourth advisor, who is a tier 3 resource. Over the weekend I've downloaded the patch, erased the Time Capsule, reset it to factory settings, plugged it into ethernet, renamed the Time Capsule, the airport network & my computer and still don't have a functioning Time Capsule after a very 'Microsoft' weekend of waiting for several backups to bomb.
The only reason I'm on Lion is that I was a MobileMe customer and wanted to keep my email address.   I'm now thinking of getting a personal domain email, i.e. [email protected], dumping iCloud which really doesn't have any value to me, and in fact has less functionality that I need than MobileMe had, and reloading Snow Leopard.
That, or I can stop trying to fix Time Capsule, use third-party local drives until Apple gets around to fixing Lion.
Another 'feature' I've also discovered is that I can no longer take a Pages document and send a Mail message converting the document to PDF reliably.   It now works some of the time.
I've been one of 'the faithful' who's had Apple products since 1987 and loved them.   I stuck with Apple through the 'Soda Jerk' years and that european dude.   I'm hoping that Lion is some weird product anomaly and that Apple will improve it's product quality to where it used to be.    Also, not force people into product upgrades by not restricting features on new releases like Mountain Lion to machines less than 3 years old.   There really will not be any place else to go unless Google gets into hardware.

Problems with Time machine after bootcamp Win7

Hi everyone,
I have been wrestling with this problem for a few days now, been researching online and trying a majority of solutions I ran across..
Here is what I did to screw it up:
I installed Windows 7 using Boot camp.. Which actually works out pretty good..
This is when I noticed that my time machine program was going wrong:
When I keep getting that error saying unable to back up, which doesn't tell me anything..
I followed the solutions that the Utility program says.. Format my external hard drive.. So I was hoping to start anew with it, kissed about a year worth of backups good bye..
Which sadly solved nothing except for the freezing of time machine at 45.5GB, now it just says it fails after doing 8GB.. Both computer and external hard drive checks out OK by the Utility program.
This is what I found on my system.log :
mds[32]: (/Volumes/Untitled/.Spotlight-V100/Store-V1/Stores/DEB63C2D-2705-44E5-86F2-2D3E B1C2E65F)(Error) IndexCI in bt_shadowTrie:read err: 5
mds[32]: (/Volumes/Untitled/.Spotlight-V100/Store-V1/Stores/DEB63C2D-2705-44E5-86F2-2D3E B1C2E65F)(Error) IndexCI in _indexShadowBulk:indexShadowFiles error: 5, live.0.mds[32]: (/Volumes/Untitled/.Spotlight-V100/Store-V1/Stores/DEB63C2D-2705-44E5-86F2-2D3E B1C2E65F)(Error) IndexCI in _ContentIndexSyncIndexBulk:indexShadowAndCommitBulk error:5
I try looking it up,but its a mystery in it's self.. I try reformatting the external HDD and starting all over, and it keeps coming up.. What does this cryptic message mean? How can resolve this issue so I can start getting my backuping underway?
Thank you for any replies

Bluemidknight wrote:
mds[32]: (/Volumes/Untitled/.Spotlight-V100/Store-V1/Stores/DEB63C2D-2705-44E5-86F2-2D3E B1C2E65F)(Error) IndexCI in bt_shadowTrie:read err: 5
mds[32]: (/Volumes/Untitled/.Spotlight-V100/Store-V1/Stores/DEB63C2D-2705-44E5-86F2-2D3E B1C2E65F)(Error) IndexCI in _indexShadowBulk:indexShadowFiles error: 5, live.0.mds[32]: (/Volumes/Untitled/.Spotlight-V100/Store-V1/Stores/DEB63C2D-2705-44E5-86F2-2D3E B1C2E65F)(Error) IndexCI in _ContentIndexSyncIndexBulk:indexShadowAndCommitBulk error:5
Is your Time Machine disk named "Untitled"? There's something wrong with the (hidden) Spotlight index on the "Untitled" drive.
The easiest (and, fortunately, most likely) way to fix that is to go to System Preferences > Spotlight > Privacy, and add the Untitled volume to the exclusion list temporarily.
Then try another backup. If it runs ok, go back and remove the exclusion. That will re-index the drive "from scratch" and likely fix whatever's corrupted.

Problem with email settings after trying to log onto secure network...

i was trying to access a network at work. when the "found networks" screen popped up, i selected the secured and then tried to enter the key. the IT guy didn't think it would work because he needed to know the mac address, but we tried it anyway.
apparently, we mis-typed the key, and shortly there after, the phone locked up (the screen would freeze). i plugged it into the computer to reset and eventually the phone would wake up and seemed to be ok, but i noticed that the phone was REALLY slow. also, when i unplugged the phone from my computer, if i put it to sleep, it wouldn't wake up and i would have to plug it back in to the computer to get the screen to show again (it could have just been slow to respond).
So, after dealing with the panic that my phone was defective, i decided to "restore" the phone. During the process, it asked if i wanted to restore from backup or "install as new" or something like that. thinking back to the nightmare activation period, i choose restore from backup. now, everything seems to be working ok, but when i try to send email, i get a "server doesn't recognize my email address" message. btw, i can receive email messages from my isp. i didn't have this problem before and can't help but wonder that something with that previous attempt to connect to that secure network is causing some problem...
i know this is a long message, but i tried to include all pertinant information in the hopes of someone being able to offer some suggestions. i guess my next stop will be the apple genius.
thanks.
phil
PowerBook G4 Mac OS X (10.4.2)

^ What he said. You can try changing the outgoing mail server to cwmx.com as well, just to see if that helps you out. If it does, it's most likely not connecting to the WiFi, rather it's using EDGE as that's an AT&T/Cingular (one entity?) server.

Problems with video settings after upgrade to final cut 5.0

I upgraded my G5 to 10.4.10; and final cut to studio 5, and alkso tried studio 2 final cut 6
both times I get the message: cannot find firewire device. I am using a Sony DSR 25 dvcam deck, and it is recognized a such on the firewire buss in the About this Mac display..
also, when I boot final cut (ver. 5) by clicking continue; In View the external video is permanently Off - it will not allow me to click All Frames.
In av system settings: the video preference is: none, and this message :(missing) firewire ntsc 720x480..that is the message - "missing" ????
lastly, I un-installed all previous final cut versions.
any insight?
thanks
apple G5 Mac OS X (10.4.10) second HD/workdrive

You can try the tip described here (specially the terminal command):
http://gizmodo.com/5938452/a-trick-to-make-using-an-external-monitor-with-your-m acbook-way-better
Regards.

Citadel time wrong after daylight savings change

I have just noticed that all of my previous alarms in Citadel are now
off by 1 hour after the fall time change. For example, an alarm that
occured at 4:00 am yesterday (and was in the Citadel database as 4:00
am yesterday), is now shown as 3:00 am after the time change.
Any work arond for this? I am running lookout 6.0
Also, is there a way to change the order of the date field in Citadel?
It displays as month first in the date colum. I would like YYYYMMDD
HHMMSS so when I export to Excel it will sort corectly.
Thanks in advance.

alan,
What Bob said is correct. You can change the way Excel formats
the date to however you want by right-clicking on the cells and
selecting Format Cells..., then clicking on either Date, Time,
or Custom, and changing the format that way, however this will have no
bearing on how Excel sorts the columns. The values are stored in
Universal Time format.
Doug M
Applications Engineer
National Instruments
For those unfamiliar with NBC's The Office, my icon is NOT a picture of me

Potential Problem with Time Capsule after purchasing second computer?

I have had a MacBook for 3 years and have been backing it up on a Time Capsule (about 40Gb). Now I bought an iMac and would like to set up a system
1.with all applications and files on the iMac, as my main computer, backed up on the Time Capsule ,
2. and with the option to easily synchronize new or adjusted files I produce when I travel with (or work on) my Macbook and iPad .
How should I proceed to avoid trouble? Any experience with an isuue like that?
Thank you very much
Paul

I have almost the identical issue to above - except for the different version of operating systems (I'm running Lion to Lion both most recently updated). I migrated from a 2009 24" iMac to a new 2011 27" iMac and the first backup to initiate following the migration failed with exactly the same error message. Notably, this was on my 2009 Mac (as I have not activated TC on the new one yet).
Pondini is a great reference... but following his logic, I would seem to have a corrupt disk. But I can still access the TM history and browse without problem. Help

Problem with time capsule after reset

I've a time capsule. I had to reset it for networking problem. I had to make a reset unplugging TC then plugging back switching the rear reset button.
Well, my time capsule switches on, but when i configured it, the capsule (when is reswitching on) doesn't be recognised from my system.
What can i do? Thanks a lot!

When I factory reset the time capsule, will that erase all the data kept on the capsule,
By "data" if you mean your previous backups, the answer would be no.
All of your current network configuration settings will be reset back to factory defaults.

Problems with iPod/iCal and daylight savings

Why is it that after Apr. 2, 2006 my ipod changed the times for my calendar events to be 1 hour back (i.e. an appt for 7:45 am now states 6:45 am) when they are fine in iCal? How can I fix this?
3G ipod, 15GB, firmware 2.3, itunes 6.0.4, ical 2.0.3 Mac OS X (10.4.5) powerPC

Thanks

Problem with time machine after replacing hard drive

A couple of days ago i went to the apple store and got the hard drive replaced on my macbook pro. When i got home i realized i couldnt back up from my time capsule. When i open time machine the only backups i can find are from "today" and i cant find anything else. I have not deleted anything and have not got any warnings about any backups being deleted.
I then went in to the time capsule from the sidebar in finder -> data, in which i found two sparsebundles. When clicking on the one i needed, i got this message:"no mountable filesystems". And from here on i dont know what to do.
I have been reading all over the forum, but can not find the answer. Also have in mind i am NOT a mac geek and know very little about this. I just want my important files back on my mac in a way i can understand.
Any help appreciated!

MAC.sparsebundle modified 21.june 2011 and MACBOOKpro.sparsebundle modified today
MAC.sparsebundle is the one i want to access.
2011-07-05 20:02:19 +0200: Disk Utility started.
2011-07-05 20:04:41 +0200: Verifying volume “Time Machine-sikkerhetskopier”
Starting verification tool: 2011-07-05 20:04:41 +0200
2011-07-05 20:04:41 +0200: Invalid content in Journal
2011-07-05 20:04:41 +0200: Checking Journaled HFS Plus volume.
2011-07-05 20:04:41 +0200: Detected a case-sensitive catalog.
2011-07-05 20:04:45 +0200: Checking Extents Overflow file.
2011-07-05 20:04:56 +0200: Checking Catalog file.
2011-07-05 20:23:35 +0200: Stopped by user
Verifying tool completed: 2011-07-05 20:23:35 +0200
2011-07-05 20:23:35 +0200:
2011-07-05 20:23:35 +0200:
2011-07-05 20:23:38 +0200: Verify and Repair volume “Time Machine-sikkerhetskopier”
Starting repair tool: 2011-07-05 20:23:38 +0200
2011-07-05 20:23:40 +0200: Invalid content in Journal
2011-07-05 20:23:40 +0200: Checking Journaled HFS Plus volume.
2011-07-05 20:23:43 +0200: Detected a case-sensitive catalog.
2011-07-05 20:23:47 +0200: Checking Extents Overflow file.
2011-07-05 20:23:54 +0200: Checking Catalog file.
2011-07-05 20:41:30 +0200: Stopped by user
Repair tool completed: 2011-07-05 20:41:33 +0200
2011-07-05 20:41:33 +0200:
2011-07-05 20:41:33 +0200:

Dreamweaver CS3 crashes after Daylight Savings Time ends

In Windows XP x64, Dreamweaver CS3 crashes after
Daylight Savings Time ends. There is a technote that seems to
describe the situation exactly.
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402776&sliceId=1
However...
1) The technote says this happens only with ASP and PHP code.
I'm using ColdFusion. (That's a minor point.)
2) The technote says...
Delete the WinFileCache-AD76BB20.dat file from the
Dreamweaver user configuration folder. Note that on Windows, the
Application Data and AppData folders are hidden by default, so
verify that your Windows Explorer folder options are set to View
Hidden Folders. The location of this file is as follows:
Dreamweaver CS3 on Windows Vista:
C:\Users\[username]\AppData\Roaming\Adobe\Dreamweaver
9\Configuration
Dreamweaver CS3 on Windows XP:
C:\Documents and Settings\[username]\Application
Data\Adobe\Dreamweaver 9\Configuration
However, I coudn't find WinFileCache-AD76BB20.dat in
Documents and Settings or in Program Files (86)\Adobe. (The 86 is
because this is a 32-bit program on a 64-bit machine, but all the
rest is the same.) I then searched both directories for *.dat and
there was no file that looked anything like
WinFileCache-AD76BB20.dat.
.Can anybody help me?
Thanks!

Alan, thanks for the suggestion.
I did the search found the file, deleted it, opened
Dreamweaver CS3, selected the same text -- and it crashed as
before.
THEN I REBOOTED and tried again - NO CRASH. So it seems that
a reboot is an essential part of the fix.
BTW: My situation fit the Technote description exactly. (1)
The crash happened when selecting -- in design or code view --
certain text in a context of HTML intermingled with ColdFusion
code; (2) I had no problem with these files before Daylight Savings
ended; (3) even after that I had no problem with them in Macromedia
Dreamweaver 8 on another machine -- the problem was only on CS3.
So the Technote is correct as far as it goes, but should be
amended as follows:
1) ColdFusion should be included in the types of code that
can be associated with the problem.
2) Instead of deleting WinFileCache-AD76BB20.dat, one should
delete WinFileCache-[whatever].dat.
3) A reboot after the deletion may be required.
Anyway, problem solved.
Thank you!

Multiple instances spawned after daylight savings time change

This is a known issue and there is an SAP Knowledge Base Article created on this issue:
1448881 - Multiple instances spawned after daylight savings time change
Below is the information from the SAP Knowledge Base Article:
Symptom
Scheduled reports that are supposed to run once a day, run multiple times.
Duplicate instances are being created.
Environment
BusinessObjects Enterprise XIR2 SP5
BusinessObjects Enterprise XIR2 SP5 + FP5.x
Reproducing the Issue
A report is scheduled to be run on a daily basis - this is a Recurring schedule.
Normally the report runs once a day, at a particular time.
After Daylight Savings Time change, the report runs at the specified time, but immediately after the successful instance, another instance is spawned.
Many more instances spawn after each instance completes.
Cause
This is a known issue: ADAPT01318487. This issue is because of DST and how our code handles this change.
Resolution
There is currently no known fix for this issue. There is however a script that can quickly resolve the problem.
The issue it seems is related to Daily recurring schedules.
What this script will do:
it will run a query to display all your DAILY Recurring jobs
you will have the option to choose your jobs and reschedule them by 1 hour
you will then highlight the same job and change them back by 1 hour
by modifying the schedule times, you are modifying the schedule itself and this will keep the issue of duplicate instances from occurring.
Exact Steps to Complete:
Stop the Job Servers.
Double click on the .hta file.
Change the System Name to that of your CMS name.
Add the Administrator's password.
Click Logon.
Click List All Recurring Instances.
Select All.
Make note of what it says in: Schedule Selected Recurring Instances: Should be 1 hr earlier.
Click Reschedule Selected Recurring Instances.
Choose All instances again and change Schedule Selected Recurring Instances to 1 hour Later.
Click Reschedule Selected Recurring Instances.
Now start your Job Servers.
The issue should not occur again.
The Script is attached here, but please review the SAP Knowledge Base article 1448881 as well

Hi Nicola,
- The multiple spawned instances issue ONLY affects XI3 SP3+ only. For XI3 SP1 and SP2 all Fix Pack levels this is not an issue as it was introduced as a problem in SP3.
- 1568239 notes the Java version and can apply to all O/S environments and is updated to reflect that.
If you are located in Europe you can also apply the patches in advance of the DST change to avoid the problem. If you are in Americas at this point utilizing the clean up scripts for this year is the approach needed to clean up the spawned instances and reschedule the existing schedules.
Thanks,
Chris

Problem with time settings after daylight savings

Similar Messages

Maybe you are looking for