Problem with title bar icons to change window size

i am running v 2.6 on vista 64 bit with a dual core processor. the window opens full screen on my Eizo 24" monitor set at 1900x1200 but there are no choices in the top right of my menu bar to shrink, move the window. i therefore cannot shrink the window or move it to my second monitor. if i right click on the lightoom icon in the taqsk bar, there are no choices to move, size, minimize,etc. other applications including photoshop work fine with easy control of window size so i do not think it is my system or graphics card. contol-Q does not close the program and the only way i can do so is from the file menu.
help please.

Jerome,
Hit 'F' enough times to get the title bar back.
Hal

Similar Messages

The title bar of all my windows is unreadable, with a weird vertical stripes!

I just upgraded my 10.7 machine to 10.7.5 (from 10.7.3 or 10.7.4, I don't remember; I used the standard auto-update). Now the title bar of all my windows is unreadable, with a weird vertical striped pattern, and the buttons in my finder window are all screwed up. Very very frustrating, I've lost 2 hours today already screwing with this. Help!!!!! [email protected]

http://www.facebook.com/photo.php?fbid=10151225222452755&set=pb.680242754.-22075 20000.1348108094&type=1&theater

How to get rid of title bar of a quicktime window?

The main problem:
I want to display the title info etc about each track as they play in iTunes. How can I do that on an otherwise black screen (desktop) (I don't want to use the visualizer with its psychedelic patterns).
Background:
I want to play music from iTunes (many pieces in a row - for like a full day). While this is happening I want the title etc of the tune to be displayed on the screen, like white smallish text against a black background in the lower right hand corner. At the same time I want slides to be displayed on the screen.
So, with iPhoto I can run a slide show but only while one piece of music is playing.
Instead I can have the desktop slowly change (from system preferences) with images from a folder every 5 seconds. That's not too bad. Looks good, actually, except for that annoying menu bar at the top! Well, black tape can hide that one (or a second display and move it over there). Now iTunes can play away all day.
As to how to get the title etc of the song playing displayed I was thinking about somehow extracting it from iTunes with applescript, then paste it into the text track of a quicktime movie, and display that little movie in a small window. I have figured out how to get rid of the controller from the window. But, I can not figure out how to get the title bar of the quicktime window to go away - that is I want a window with nothing around it, neither controllers nor title bar nor anything. How do I create such a window. Any good ideas out there?
Or is there a totally different way of obtaining the same effect?
Thanks.
G4 Mac OS X (10.4.8)

Hi,
You could try posting at the QuickTime discussion area. There might be an iTunes visualizer that allows you to make a slideshow with track info. It has been a while since I tried making a SMIL file, but I think you could do what you want with that. Not sure how you create a streaming text of track information. I would have to do some reviewing.
gl,

Mac OS 10.7.2, Apple Title Bars are there, Other Window Title bars missing.

I just purchased a new iMac yesterday. I have been downloading WoW with the Blizzard Launcher, I can see the Apple Title Bar on the Launcher Window (3 little circles and white bar). However I can't see the Blizzard Menu Bar, is there a way to recover this bar? I need it to turn off P2P and that is the only way. Thanks for the help!

I understand that, yet this is a Mac problem not a third party problem as it has happened to 3 different things. All of the software I have downloaded comes from very reputable companies from which thousands of people have used. I am not sure if you know but BLIZZARD aka WORLD OF WARCRAFT, has Millions of downloaders. So please if someone is asking for help, try to be civilized and give an informative answer, otherwise please don't post as you have just wasted my time and anyone else that could possibly have the same issue. And certainly don't rule out that the problem isn't OS X.
Has anyone else had the issue where the menu bar is missing icons/tabs? If you could provide some info as I am very new to Apple products (less than 24 hours of being an owner). Thanks again for any constructive feedback.

.exe icon an title bar icon

I have searched the board but couldnt find an answer. I hope someone here can help me. My problem is as such, whenever I create a custom icon for my .exe, the icon for the .exe file remains as the default labview icon but title bar icon for the program changes. How do I make sure that the icon for .exe file changes aswell. I already created a .ico file and i'm running labview 8.5.
Thanks.

Your .ico file should also include a 16x16 32 colors icon (or 16 colors, I don't remember) and that will be used for the window title. Personally, I use IcoFX for creating icons, which is free, but I assume that the icon editor in 8.x can allow you to do this as well.
Try to take over the world!

How do I get the full current path in the title bar of a terminal window?

Is it possible to get the full current path in the title bar of a
terminal window? I would find that more meaningful than
"Terminal - tcsh - 80x60" (which I currently get). Doing
this would free me from wanting to display the path in my
system prompt thereby allowing me to use a shorter prompt
and having more space on the line for actual input.
Thanks
Ron
Dual 1Ghz PowerMac G4 Quicksilver 2002 Mac OS X (10.4.8)

IIRC, Terminal->Window Settings->Window controls that information. That said, I don't understand what full current path means in this context, nor why you'd want to display it in title bar.
Your terminal prompt is a concatenation of your computer name (SysPrefs->Sharing—easily changed) and the path to your user's home directory using the short username (hard to change).
computer name:~ username$

Tabs are not in the title bar even when the window is maximized on Windows

if I'm right since FFX 4b9 tabs should be located in title bar when the ffx window is maximised on Windows OS. [[https://bugzilla.mozilla.org/show_bug.cgi?id=572160]]
I'm on XP Pros
This works fine on minefield for me.
But under FFX 4b9 and 4b10... tabs are still under Firefox logo...

Hello,
I have same kind of issue, but for me it works only with maximized windows. On normal windows the tabs tags are still under firefox button. Like you can see on the images I uploaded.
Is there any way to make it appear always like when maximized to fill the gap?
Thank for your help

Complied chm file displays 'HTML help' on the title bar instead of the window name

Complied chm file displays 'HTML help' on the title bar instead of the window name.
I tried several ways like:
1. Changed File>Project settings name and also set the language to English (US).
2. Checked the Title name in .hhp file
3. Used the window while compling.
4. Robohelp language settings.
5. Also uninstalled and reinstalled robophelp.
But nothing helped
The title name is displayed correctly if the same project is compiled on another machine.

When the code in the HHP and the regional settings on a PC match, the correct title is displayed. Or other way around is also true the help title is displayed in the language specified in the help project IF (and only if) the regional settings of the PC match that language. Otherwise, "HTML Help" is displayed.
Hope this help.
Thanks and Regards,
Rahul Karn

Solution Center problem with HP Office Jet J4550 and windows 7 (64bit)

Hello All,
I have a problem. I have the Solution Center and a HP Office Jet J4550 and windows 7 (64bit). When ever I open the solution center, the solution center says " HP office jet J4550 series disconnected" When I open HP document manager, I can access the printer. Additionally, when I run the HP Print Diagnostic Utility 4.0, it sees the printer, no issues. I can print test pages. No issues. I downloaded the latest driver from the HP site (OJJ4500_Full_13, 299,359KB) Your insight is appreciated.
Thank you
Roy B

I have a similar problem with the J4580 and my new Windows 7 64-bit laptop. HP Solution Center says that the printer is disconnected. Furthermore, it can print some documents (short ones), but it was unable to print a 1-page 5MB pdf file. The printer truncated the page after printing just the top 10%. The printer is OK with my wife's Windows 7 32-bit laptop.
I've seen many other people complain about similar problems in this and other forums. Apparently the driver for J4500 printers is not compatible with Windows 7 64-bit. Can HP please provide an updated driver or patch?

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.
I saved a new workspace and it did not help.
No problem before I went to Maverick.

I found the fix, go to System Preferences and open Mission Control and uncheck the box to keep monitors as they were (When switching to an application...........)

HT5622 Due to problems with my original email I changed my apple id email and password months ago. Suddenly it is reverting to my old email. How do I get it to totally forget the original? I have iPhone, iPad and MacBook Pro.

Due to problems with my original email I changed my apple id email and password months ago. Suddenly it is reverting to my old email. How do I get it to totally forget the original? I have iPhone, iPad and MacBook Pro.

Hey 1Jerry,
Thanks for the question. You'll want to delete and re-add your iCloud account (utilizing the new Apple ID address). When prompted, opt to keep as much information on your device as possible. The following article provides information on how to do so:
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Turn off iCloud completely
Depending on whether you want to stop using iCloud on all or only some devices, do one or more of the following:
On your iOS device’s Home screen, tap Settings > iCloud, then at the bottom of the screen, tap Delete Account.
Thanks,
Matt M.

Big problem with status bar legibility in IOS 7.0.4

Hi, i'm adressing this problem to Apple. I recently update my iphone 4s to ios 7.0.4 and i have found some problems with status bar visibility in certain apps. Ex: in Photo app, the status bar is dark and it is unreadable, same in Lockscreen in Emergency menu, in menu when someone calls or you call someone and in Camera app the status bar is black and overlaps with the text and option buttons of the app. Please fix this as soon as possible because it is very frustrating.Sorry for bad english :d

There is no Apple hear in this user to user forum.
YOu can send feedback here http://www.apple.com/feedback/

I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted??

I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted? Maybe Itunes thought that I was someone trying to copy my old podcast because I kept the same name, I tried to change the names but it looks like I'm on a blocked list...

There is a procedure for changing the feed URL for a podcast, which it seems you haven't followed: you have to add a special tag to the old feed - just submitting a new feed will have exactly the effect you describe. The proper method is described here:
http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move

Why is CS6 Zoom change window size is different then previous versions?

Why in CS6 when zoom changes window size and a folating window fits in Photoshop window or on other display screen do I get scroll bars where a select all selection marching ants are not visible on all four sides till I drag out the window to get rid of the scroll bars so I can see all of marching ants. In preious versions of Photoshop space for scroll bars is present but there are no scrool bar, select all marching ants are visible on all four sides when an image's window fits in Photoshop window or on second display. Is there a way to make CS6 work like previous versions? Also if I just open a document and Photoshop fits it to Photoshop window or second display the floating window is correct without scroll bars. Zoon add then even when not needed....

Without manually resizing each open document window on my Mac, Photoshop 13.x would be simply unusable.
I hadn't posted anything on the subject because the system on which I run Ps 13.0.1 is based on a laptop (MacBook) literally rescued from the trash and with minimal specs. The graphics card is not even involved in processing.
I put up with it because I'm basically using it to run ACR 7.2RC1, then bring the converted and ACR-adjusted onto my regular working machine running CS4.
In a nutshell, nothing will make the window fit the main monitor, not Fit To Window, nor 100% view, nor any shortcut.
I need to drag the window manually from the lower right-hand corner in order for it to fit the monitor. Otherwise, there are substantial gaps on the right and at the bottom. I never run in tab view.
For the sake of thoroughness:
2007, 2GHz MacBook 2,1, Intel Core 2 Duo, 4 GB of RAM (can use 3 GB), 160 GB internal boot disk, dedicated FireWire400 external HD for Ps scratch disk, external Time Machine HD. Dual external monitors + built-in laptop screen Snow Leopard 10.6.8.
The Mac-Intel is used for no other purpose than running ACR 7.2RC1 and the only other application I occasionally run on said Mac-Intel is TextEdit.
My main working machine is a Power Mac (PPC) G5 Quad with 16 GB of RAM, on which 11.0.2 is the last version of Photoshop to run, so I have the Mac-Intel system described above just to run ACR 7.x under Photoshop 13.0.1. I convert my raw files in ACR7.x open them in Ps 13.0.x and save them via Ethernet to an external HD connected to the G5 Quad for further processing in CS4.
2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; intrusive Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.

How to change window size dynamicalyy in scripts

HI,
how to change window size dynamicalyy in sap scripts.pls suggest me.

You acnnot do that but what you can do is to have two layouts, having two windows with different sizes and calling one of them conditionally.
using start_form end_form functions:
open_form.
if cond 1.
call start_form. "pass form 1
call end_form.
endif.
if cond 2.
call start_form. "pass form 2
call end_form.
endif.
close_form.
Regards,
ravi

Problem with title bar icons to change window size

Similar Messages

Maybe you are looking for