Problem with Titling Build In/Out

Recently, I've created a title with a blur build. After a while, I'll replay my video and find that the last few letters at then of the title line pop in first during the build and then remain on the screen instead of blurring out. This happens with other builds as well. Why is that, and how do I fix that?

hi Markus,
found the following in DB:
"Problem Description:
I have my SCC configured with a LabVIEW perforce client. If I open the VI \examples\comm\access.llb\Retrieving Data from Access.vi and then from its block diagram open the subVI with a icons that says "2", then modify the sub VI, I don't get prompted to check the sub VI out. Howewver, if I close everything down and open the Part 2.vi from the GSW, then it does prompt for check out when I edit it.
Steps to Reproduce:
Make sure the prompt to check out SCC config option is set. 1. Launch LV. 2. Create a new project. 3. Add a VI to the project that is in SCC (not checked out) AND has a subVI that is also in SCC (and not checked out). 4. Open the VI from the project. 5. Go to the block diagram of the VI and open the subVI. 6. Edit the subVI. No prompt to check out is presented.
Workaround:
1. Explicityly add the subVI as an item under source. 2. Refresh the dependencies node after adding the main VI."
furthermore I found this link but I don't know if this will help...
greets!

Similar Messages

Problem with Automatic Replies or Out of Office

Hi mates!
I´ve just finished migration Exchange 2003 to Exchange 2010.
Today I´ve removed Exchange 2003.
I have a problem with Automatic Replies or Out of Office. When the user active Automatic Replies in Outlook 2010, He has this Error:
Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later.
If I logged into OWA, (Options > Set Automatic Replies) I could set it up and it worked fine.
I run Test E-mail AutoConfiguration command to see if AutoDiscover has been configured and the OOF URL is correct:
https://mail.domain.com/ews/exchange.asmx
I try to browse the OOF URL from IE, It works fine.
Authentication Permission for EWS Virtual Directory is:
Anonymous – Enabled (For IUSER)
Basic – Enabled
Windows – Enabled
Other authentication methods are disabled.
WebServicesVirtualDirectory configuration for URL:
InternalNLBBypassUrl :
https://Server1.domain.local/ews/exchange.asmx
InternalUrl
: https://mail.domain.local/EWS/Exchange.asmx
ExternalUrl
  : https://mail.domain.com/EWS/Exchange.asmx
InternalNLBBypassUrl : https:// Server2.domain.local /ews/exchange.asmx
InternalUrl
: https:// mail.domain.local /EWS/Exchange.asmx
ExternalUrl
: https:// mail.domain.com /EWS/Exchange.asmx
I use a certificate for Server HUB/CAS from my CA (Active Directory).
In EMC I have this error for certificate:
The certificate status could not be determinated because the revocation check failed.
But when I generated in the past, this status of this certificate was This certificate is valid for Microsoft Exchange.
I need help, because I don´t know I do…
Thanks.

Hi MAS,
As soon as possible I will install this kb in a PC with Outlook 2010.
Yes, I reset IIS, with the same result.
I check this URL, and I run this command: TestOutlookWebServices -identity user01 with this result:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1019
Type : Information
Message : A valid Autodiscover service connection point was found. The Autodiscover URL on this object is https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1006
Type : Information
Message : Contacted the Autodiscover service at https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1022
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1106
Type : Information
Message : Contacted the Autodiscover service at https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1122
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXCH] Successfully contacted the UM service at https://mail.domain.local/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXPR] Successfully contacted the UM service at https://mail.domain.com/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1124
Type : Success
Message : [Server] Successfully contacted the AS service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 934 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1126
Type : Success
Message : [Server] Successfully contacted the UM service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 93 milliseconds.
All ok, but with these errors:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
In IIS for EWS has this method Authentication:
- Anonymous
- Basic
- Windows
For SSL Settings in EWS has this configuration:
- Require SSL
- Client Certificate: Ignore
For Default Website in IIS, SSL Settings:
- Require SSL
- Client Certificate: Ignore
I don´t have ISA/TMG. I use HLB KEMP for publishing OWA...

Problem with XMLTABLE and LEFT OUTER JOIN

Hi all.
I have one problem with XMLTABLE and LEFT OUTER JOIN, in 11g it returns correct result but in 10g it doesn't, it is trated as INNER JOIN.
SELECT * FROM v$version;
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
"CORE     11.2.0.1.0     Production"
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
--test for 11g
CREATE TABLE XML_TEST(
     ID NUMBER(2,0),
     XML XMLTYPE
INSERT INTO XML_TEST
VALUES
     1,
     XMLTYPE
          <msg>
               <data>
                    <fields>
                         <id>g1</id>
                         <dat>data1</dat>
                    </fields>
               </data>
          </msg>
INSERT INTO XML_TEST
VALUES
     2,
     XMLTYPE
          <msg>
               <data>
                    <fields>
                         <id>g2</id>
                         <dat>data2</dat>
                    </fields>
               </data>
          </msg>
INSERT INTO XML_TEST
VALUES
     3,
     XMLTYPE
          <msg>
               <data>
                    <fields>
                         <id>g3</id>
                         <dat>data3</dat>
                    </fields>
                    <fields>
                         <id>g4</id>
                         <dat>data4</dat>
                    </fields>
                    <fields>
                         <dat>data5</dat>
                    </fields>
               </data>
          </msg>
SELECT
     t.id,
     x.dat,
     y.seqno,
     y.id_real
FROM
     xml_test t,
     XMLTABLE
          '/msg/data/fields'
          passing t.xml
          columns
               dat VARCHAR2(10) path 'dat',
               id XMLTYPE path 'id'
     )x LEFT OUTER JOIN
     XMLTABLE
          'id'
          passing x.id
          columns
               seqno FOR ORDINALITY,
               id_real VARCHAR2(30) PATH '.'
     )y ON 1=1
ID     DAT     SEQNO     ID_REAL
1     data1     1     g1
2     data2     1     g2
3     data3     1     g3
3     data4     1     g4
3     data5          Here's everything fine, now the problem:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
PL/SQL Release 10.2.0.1.0 - Production
"CORE     10.2.0.1.0     Production"
TNS for HPUX: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
--exactly the same environment as 11g (tables and rows)
SELECT
     t.id,
     x.dat,
     y.seqno,
     y.id_real
FROM
     xml_test t,
     XMLTABLE
          '/msg/data/fields'
          passing t.xml
          columns
               dat VARCHAR2(10) path 'dat',
               id XMLTYPE path 'id'
     )x LEFT OUTER JOIN
     XMLTABLE
          'id'
          passing x.id
          columns
               seqno FOR ORDINALITY,
               id_real VARCHAR2(30) PATH '.'
     )y ON 1=1
ID     DAT     SEQNO     ID_REAL
1     data1     1     g1
2     data2     1     g2
3     data3     1     g3
3     data4     1     g4As you can see in 10g I don't have the last row, it seems that Oracle 10g doesn't recognize the LEFT OUTER JOIN.
Is this a bug?, Metalink says that sometimes we can have an ORA-0600 but in this case there is no error returned, just incorrect results.
Please help.
Regards.

Hi A_Non.
Thanks a lot, I tried with this:
SELECT
     t.id,
     x.dat,
     y.seqno,
     y.id_real
FROM
     xml_test t,
     XMLTABLE
          '/msg/data/fields'
          passing t.xml
          columns
               dat VARCHAR2(10) path 'dat',
               id XMLTYPE path 'id'
     )x,
     XMLTABLE
          'id'
          passing x.id
          columns
               seqno FOR ORDINALITY,
               id_real VARCHAR2(30) PATH '.'
     )(+) y ;And is giving me the complete output.
Thanks again.
Regards.

Problem with Weblogic Builder SP1

I have a problem with Weblogic Builder SP1. I basically re-used my EJB deployment
descriptors from WL5.1 in WL8.1. Before SP1, i have no problem loading my EJB
in WB. But with SP1, WB throws weblogic.marathon.model.LoadFailureException.
I re-attempted by jarring my EJB with WL5.1 descriptors and used my friend's WB
(not SP1) to export new descriptors which I used to re-jar. This new EJB is again
not recognised by WB SP1?
What is wrong?

The exception is as follows:
Opening module myproj.jar
java.lang.NullPointerException
     at java.util.Arrays.sort(Arrays.java:1181)
     at weblogic.marathon.model.EJBJarCMBean.initRelations(EJBJarCMBean.java:1212)
     at weblogic.marathon.model.EJBJarCMBean.initBeans(EJBJarCMBean.java:1098)
     at weblogic.marathon.model.EJBJarCMBean.setup(EJBJarCMBean.java:1144)
     at weblogic.marathon.tasks.OpenModuleTask.getEJBModule(OpenModuleTask.java:156)
     at weblogic.marathon.tasks.OpenModuleTask.figureOutModule(OpenModuleTask.java:191)
     at weblogic.marathon.tasks.OpenModuleTask.figureOutModule(OpenModuleTask.java:230)
     at weblogic.marathon.tasks.OpenModuleTask.runBackground(OpenModuleTask.java:89)
     at weblogic.tools.jellybeans.core.task.TaskThread.execute(TaskThread.java:127)
     at weblogic.tools.jellybeans.core.task.TaskThread.run(TaskThread.java:64)
Module myproj.jar descriptors failed to load
The EJB has no problem deploying.
Rob Woollen <[email protected]> wrote:
You'll have to at least show us the error you get from marathon.
Does your application deploy to the server?
-- Rob
Robin Tan wrote:
I have a problem with Weblogic Builder SP1. I basically re-used myEJB deployment
descriptors from WL5.1 in WL8.1. Before SP1, i have no problem loadingmy EJB
in WB. But with SP1, WB throws weblogic.marathon.model.LoadFailureException.
I re-attempted by jarring my EJB with WL5.1 descriptors and used myfriend's WB
(not SP1) to export new descriptors which I used to re-jar. This newEJB is again
not recognised by WB SP1?
What is wrong?

Problem with Folio Builder - added articles are "spinning"

Hello,
today we are experiencing strange problems with Folio Builder. We are adding new artcles to folio created today and all added articles have same issue - spinning wheel in folio builder. Such articles we can't see in Content viewer until we delete existing folio.
Thanks for help

Hi,
Could be that there was a network problem when uploading the InDesign documents.
Try to select the articles and delete them with the trashcan. And then reupload the documents from InDesign.
Good luck!

Strange problem with my build JAR

Hiii everybody... I'm having a strange problem with my build (JAR file)... when I work with the Eclipse and I click in the table that returns the clients stored in my PostGre database it works fine, but when I build my application and it generates my JAR file and I open it and click in the same table to return the objects that I have.. it does not appears anymore.. just show when I work with eclipse... and the database is the same for both.
I already checked the database path in my properties file... and the application recognize the database because I can login and there isn't any runtime exception...
In that application I work with Hibernate and Spring... for me it is very strange because the application works fine when I run by eclipse... but does not return the database data when I click on my Jar file to open the application..
Someone can help me with that?
I dont know if the problem is in the Spring, Hibernate, Libraries...
thanks in advance...

So what's the error then? Are there any error messages? Have you checked the console? Or are you just clicking on the jar and you wouldn't even see the errors if there are any?
What do the logs say?
You're not giving a lot to work on here.

Has anyone had any problems with their charger blowing out?

Has anyone had any problems with their charger blowing out? mine blew, there's now a charred pin on the charger and in the socket of the macbook. The plastic around the charge socket is also cracked & distorted from the blow-out. It wasn't a power surge as no other electrical items were affected. It wasn't liquid or dust, as I'm the only person who uses it & I'm very careful. I'm concerned that the consequences could have been terrible. I wasn't present when it happened though, I can just see the evidence after the event.
I have a mid 2010 13" Macbook running the latest software & use the original magsafe charger that came with it.
Will I have to fork out for a costly repair or is there a safety issue that Apple will sort out for me?
Any advice would be much appreciated.

Everything in the box with iPhone is covered by the iPhone warranty ,go to Apple genius bar before warranty expires

TS1702 I am having a problem with the Simpson tapped out app it won't connect to the server it only happens on my iPad other iPads are ok

I am having a problem with the Simpson tapped out it will not connect to the server it only occurred on my iPad not any others in my home

Hey Jerryd820,
Thanks for the question, and welcome to Apple Support Communities.
The following article provides suggestions if you are having issues with a specific application:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702
6. Reinstall the affected application
Remove the application from your device and reinstall it.
1. Touch and hold any application icon on the Home Screen until the icons start to wiggle.
2. Tap the "x" in the corner of the application you want to delete.
3. Tap Delete to remove the application and all of its data from your device.
4. Press the Home button.
5. Go to the App Store.
6. Search for the application and then download it again.
Note: If it is a paid app, ensure you are using the iTunes account you purchased the app with originally. If it is not, you will be charged for the app again. For more information regarding downloading previously purchased items, see this article.
7. If the issue is still unresolved
If you continue to experience the issue, contact the developer of the application for further assistance.
Thanks,
Matt M.

Problems with the build-IN SNTP-Client on cRIO9014&cRIO9012

Hi out there,
I have a problem using the build-IN SNTP-Client of a cRIO-9014 (and a cRIO-9012).
It seems that the cRIO sometimes gets another time (e.g. 28.01.1920 12:03:00) other than it should get (e.g. 31.08.2014 09:59:00).
I've found this problem in our measurement-files. They had some unusual timestamps (as showed in the following example).
To prevent the SNTP-Client from doing too many damages to our measurement-files, I built a time-validator (with a range of 5 min), which checks one of my servers (and let it write every time change to a log file).
The Log-File looks like (Where "$Message" is a custom-message. It is unrelated to the problem, but occurs every minute):
31.08.2014          09:58:00 $Message
31.08.2014          09:59:00 $Message
31.08.2014          10:20:00 Setting Time from 28.01.1920 12:14:09 to: 31.08.2014 10:20:00
31.08.2014          10:21:00 $Message
31.08.2014          10:22:00 $Message
31.08.2014          10:54:00 $Message
31.08.2014          10:55:00 $Message
31.08.2014          10:59:00 $Message
31.08.2014          11:00:00 $Message
As you can see, the cRIO loses its time somewhere between 09:59:00 and 10:00:00(UTC) and it has been set back at 10:58:XX (UTC). It is shown with the gap between the messages at 10:55:00 and 10:59:00.
The configuration for the timesync was:
[TIME SYNC]
source.rtc.enable=True
source_priority=sntp;rtc;
source.sntp.enable=true
source.sntp.address=192.53.103.108
source.sntp.interval=60
source.sntp.port=123
source.sntp.verbose=false
source.sntp.log=false
sntp.address is a public German time-server, hosted by our national institute.
I've set sntp.verbose and sntp.log to TRUE for more information, but have to wait some time for a logfile.
The network has the following scheme:
cRIO -> UMTS-Modem -> ISP-VPN -> Internet
Does anyone have had this problem and/or know, how to fix it?
Thanks for your help!
Cateros

Hi!
The problem happens sporadically, at first, we didn't even notice it, just that there are files missing and we got the strange logs. Now, with the workaround, we can finally trace the problem (and in some cases restore our measurement).
What do you mean with "connectthe cRIO directly to a router?"? Could you please explain it?
In the enclosure are more networkdevices, but only the cRIO uses the connection to the internet.
The "UMTS Modem" has also routing capacities, which we use to remote control both of the RIOs.
Thanks for your reply
Cateros

Problems with CF Builder + RDS + Windows XP.

I have been using CF Builder since the first beta, however I am missing out on most of the functionality because I can't get it to connect to RDS. I always get a 405 method not allowed.
Where I've seen this discussed (namely on Ray Camden's site) the suggestion was to change security in IIS. Of course IIS & security on XP is much more limited than on Windows Server. I have tried everything I can and can't get it to work.
Any thoughts?
-Bill

Hi Bill, yes, I can offer such help. In fact, I've long thought about offering a low-cost, fixed-fee option to solve any single problem.
Your request here, and another earlier today, have prompted me to go ahead and set that up. It's now enabled as a new engagement type at my http://www.carehart.org/consulting/ page (where I also discuss how I offer this as remote consulting, via Adobe Connect, which I usually perform in providing CF server troubleshooting.)
I help people solve problems with CFBuilder all the time (here and in other mailing lists), and I speak and write about using it extensively.
Still, some problems are just difficult to solve in email (plus there's no guarantee of one getting a reply from anyone, including myself, here). So I'd long considered offering a service to fill that gap. The two notes today prompted me to proceed with it.
You'll see it on the page as a "CFBuilder fixed-fee/single problem" option, for a flat $US75. That's for help in getting any one thing to work in CFBuilder, such as getting debugging to work, getting RDS to work, getting code insight to work, getting the ctrl+hover hyperlinking to work, solving slow performance problems, and so on.
Now, if someone gets their hackles up at the thought that they should have to pay for getting a problem solved with CFB, well, of course, you don't have to pay. That's why these forums are here. But as Bill says below, sometimes people are just willing to pay to solve a problem, and again some problems are just hard to do without being able to see what's going on and more easily explain how things need to be configured.
If paid support is not a solution for some readers, that's understandable. (I addressed this a little more in a lighthearted mention of the new option in my reply to the other forum thread here earlier today: http://forums.adobe.com/message/3056104#3056104).
My hope would be that, with my experience solving problems, we should be able to solve most of them quickly, which is good for both of us. I'm willing to take that risk and keep it a fixed fee (compared to my normal hourly rate of $US175 for CF server troubleshooting).
Of course, the fixed fee means there's no prorating of it if solved quickly. Think of it like a plumber, who has a fixed price for a service call, even if just to plug a single leak. You're not paying for the time to plug the leak (nor even to drive over), but for the value of stopping the leak, the plumber's knowledge of how and where to solve the problem, and his setting up a business to be there when you need him.
Conversely, though, there are sure to be some problems where I just can't solve them, even after a couple of hours (they may even be bugs in CFBuilder). In that case, to protect both of us, I offer the option to refund your money after those 2 hours (unless you feel there was still value in other aspects or information shared during the call).
Hope that's helpful, to Bill and to others. Feel free to mention it to others who may appreciate this when struggle at length with some CFBuilder problem.
/charlie

Problem with Application build in JDeveloper 11.1.5 to WLS 10.3.5

Hi to everyone, I have a problem with a application build in JDeveloper 11.1.5 and deployed to a standalone WLS 10.3.5 ( with the JRF template appliied , to run adf applications )
When I try access to the page : localhost:7001/myApp , it show me :
"Error 403 Fordbbiben ".
but when I put :
localhost:7001/myApp/index.jspx, it show me :
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
and the log is :
<May 8, 2012 9:06:22 PM BOT> <Warning> <oracle.adf.view.rich.component.fragment.UIXRegion> <BEA-000000> <
java.lang.IllegalStateException: The expression "#{bindings.genRegion.regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "genRegion_dlg") evaluated to null.
This is typically due to an error in the configuration of the objects referenced by this expression.
If it helps, the expression "#{bindings.genRegion}" evaluates to "null".
If it helps, the expression "#{bindings}" evaluates to "null". Now using an empty RegionModel instead.
at oracle.adf.view.rich.component.fragment.UIXRegion.getRegionModel(UIXRegion.java:450)
at oracle.adf.view.rich.component.fragment.UIXRegion._beginInterruptibleRegion(UIXRegion.java:682)
at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:498)
at oracle.adfinternal.view.faces.taglib.region.RegionTag.doStartTag(RegionTag.java:127)
What can I do to fix the problem ??
Thanks

Analyzing the problem, I created a new ADF application with only a web page (index.jspx) , and deploy it to the WLS, and I access to URL of page and it runs !! ( http:localhost:7001/myApp/faces/index.jspx ).
But, when I ADD A TASK FLOW to the application and deploy to the WLS newly , and try to access to the URL application's ( http:localhost:7001/myApp/faces/index.jspx ) . It show me again :
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
and the log is :
<May 10, 2012 19:02:57 PM BOT> <Warning> <oracle.adf.view.rich.component.fragment.UIXRegion> <BEA-000000> <
java.lang.IllegalStateException: The expression "#{bindings.genRegion.regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "genRegion_dlg") evaluated to null.
This is typically due to an error in the configuration of the objects referenced by this expression.
If it helps, the expression "#{bindings.genRegion}" evaluates to "null".
If it helps, the expression "#{bindings}" evaluates to "null". Now using an empty RegionModel instead.
at oracle.adf.view.rich.component.fragment.UIXRegion.getRegionModel(UIXRegion.java:450)
at oracle.adf.view.rich.component.fragment.UIXRegion._beginInterruptibleRegion(UIXRegion.java:682)
at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:498)
at oracle.adfinternal.view.faces.taglib.region.RegionTag.doStartTag(RegionTag.java:127)
Why it show me that error when I ADD a Task Flow to the Application ???
Can Anyone help me please ?? I m varios days with this problem. Thanks

Problems with report builder 3.0 in SCCM 2012 R2 CU2

Hi All
I have problems with editing (Using Report builder) existing reports or creating new ones in SCCM 2012 R2 CU2
We version of SQL we use is SQL 2008 R2 SP2
I already asked this question in the SCCM 2012 forum but the problem is not related to SCCM but has something to do with application report builder
I changed the registry key and edited the Microsoft.ConfigurationManagement.exe.config.xml as described in the following link
http://blogs.technet.com/b/smartinez/archive/2012/07/03/system-center-2012-configuration-manager-create-report-don-t-work-what-do-i-do-now.aspx
Afterwards I try to edit an report I see report builder is being downloaded and after it generates the following error “Application did not succeed. Unable to continue”
Error details are
Following errors were detected during this operation.
* [22-7-2014 13:55:07] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, Microsoft.DataWarehouse.dll, has a different computed hash than specified in manifest.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
at System.Deployment.Application.ComponentVerifier.VerifyComponents()
at
System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification notification, DownloadOptions
options)
at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
And in the SmsAdminUI.log I noticed the following error
[16, PID:4460][07/21/2014 14:11:43] :[ReportProxy] - User-specified default Reporting Point [Server1.local.nl] could not be found, [Server2.local.nl] is now the default Reporting Point.
[1, PID:4460][07/21/2014 14:11:11] :System.InvalidOperationException\r\nThere is an error in XML document (1, 1).\r\n at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
I removed the reporting point no luck -> I already installed report builder 3.0 local on my computer still no luck.
I hope someone can give me some advice , I am lost with this error
Thx in advance
Regards
Johan

Hi Miss Katherine,
1. I went through the SQL steps in the link you posted
2. I updated the Reg Key and Microsoft.ConfigurationManagement.exe.config file with 3.0 on both the
server and the console machine.
3. I copied the .DLL file from your OneDrive and replaced the existing one on the server.
4. I uninstalled and re-installed the reporting role on the server and received the 1015 in the log.
5. I restarted the server and the client machine
I do get a slightly different error now after using the new DLL
Errors With Original DLL
ERROR DETAILS
* [9/30/2014 8:42:03 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, Microsoft.DataWarehouse.dll, has a different computed hash than specified in manifest.
- Source: System.DeploymentERROR DETAILS
Errors With New DLL
ERROR DETAILS
Following errors were detected during this operation.
* [9/30/2014 9:17:13 AM] System.Deployment.Application.InvalidDeploymentException (RefDefValidation)
- Reference in the manifest does not match the identity of the downloaded assembly Microsoft.DataWarehouse.dll.
- Source: System.Deployment

Problem with Vision Builder and LabView: Error -1074395995, File not found

I have created an inspection with Vision Builder AI 2009 SP1. In it I load some pictures from the HDD and run some checks over it. It works fine. Then I have migrated it to LabView 2010, I get a message that the migration is successfull, but when I run the VI on LabView I get a fail status. I have been checking my program and I have found and error when I try to load the picture from file: Error -1074395995 occurred at IMAQ ReadImageAndVisionInfo
Possible reason(s): IMAQ Vision: File not found.
But I am not sure which file it refers to. At first I thought it was the picture I wanted to load, but I have checked the path and it is correct, so maybe it refers to another thing. What puzzles me most is that it works perfectly on Vision Builder and I have changed nothing in LabView, maybe it is a problem with the migration. Any clues?

Here's a screenshot of what I'm talking about. Put a break point here and see what the path is and compare that with what Vision Builder AI is using (described where to find this in the previous post). You could find where this global is used to make debugging easier.
Hope this helps,
Brad
Attachments:
Generated Code.png ‏43 KB

Problem with Titles

I have iMovie installed on my iPhone 4. When I add a title for my clip I also get a 1/2 inch wide translucent vertical line on the left edge of my clip along with the title. I've watched an iMovie tutorial on YouTube and I see the same line; however, on the tutorial it fades out along with the title after a couple of seconds, but does not do so on my iPhone 4. Is there a way to get the line (and title) to fade out after I start playing the clip?

The title is shown for the duration of the highlighted clip. If you only want it to play for say the first 5 seconds, play the clip for 5 seconds then tap it to stop. If the current clip is not highlighted in yellow then tap it once so it is. Now drag you finger down through the clip where the red line is. This will split the clip into 2 parts, the first 5 second section and the remainder. Tap the first 5 second section to highlight it and add the title here. Now the title will only show for the first 5 seconds and fade out. He video will play back as normal and appear as one continuous clip.

Problems with titles.

When I place titles in my videos, and then review the video, the preview is very choppy where I placed the titles, then will return to normal once the title is done, then it will start being choppy again when the video contains another title.
Any one have suggestions for me to try? Perhaps some weird setting that I don't know about? Im using a 2011 MacBook Pro 2.4ghz i7, with 8 GB ram, so I don't think its a problem with my machine. And Im really new to video editing, so any help will be greatly appreciated. this is driving me crazy.
Thanks for any help.

Are you rendering your timeline whenever you see red lines above your clips (working in Timeline mode)? When you see red lines along the top of the timeline, press Enter. When the sequences are rendered, the red lines will turn green and your playback should improve greatly.

Problem with Titling Build In/Out

Similar Messages

Maybe you are looking for