Problem with TNSNAMES.ORA (urgent)
Dear Freinds,
I am trying to run my Forms(6i) on the Form server , but as I try to login to the database to run the form I am getting an error 'ora-12154 : TNS could not resolve the service names' . I have checked the local TNSNAMES.ORA file and it has the entry for my Oracle SID , (my local machine registry has also been changed).
Please tell me if I am missing to set anything .
Thanks in advance .
Hellow There,
Go to services,i.e: Start -> Settings -> Control Panel -> Services.
There is a service nam:
OracleTNSNames80
Right click on it and then click "START".
If this could not solve, then go to Oracle Net8 and try to configure "Database location" and/or "Listener Location" and see what happen in the Listener node.
If this did not help, you would go to www.Informit.com -> Free Library.
and navigate through the Library to a free electronic book:"teach u r self Oracle8 in 21 days" .. good book.
Regards
Tariq Khalaf
Similar Messages
-
Oracle client in linux problem with tnsnames.ora
hi all
i installed oracle-xe-cleint10.2 on linux machine i did not get any tnsnames.ora in my machine i am unable to connect to database. it shows tns connectiont identifier unfound. . is it come all with oracle client or some where else it .
or further any proceeding i should follow steps. if found solution regard this pls forward solution to me
Regard
syamhi all
i did not get any tnsnames.ora after installing oracle client in linux machine
i installed oracle-xe-cleint10.2 on linux machine i did not get any tnsnames.ora in my machine i am unable to connect to database. it shows tns connectiont identifier unfound. . is it come all with oracle client or some where else it .
or further any proceeding i should follow steps. if found solution regard this pls forward solution to me
Regard
syam
Regards syam -
Strange problem with TNSNAMES file
We just rebaselined a new machine with Windows XP sp2, and installed SQL Plus Release 9.0.1.4.0. We configured the sqlnet.ora file and tnsnames.ora file and placed them in the <orahome>\network\admin\ directory.
But when we try to connect to the 8i database, we get the following error message:
ORA-112154: TNS:could not resolve service name.
Now, I know that this usually means that there's something wrong with the tnsnames.ora file. So I double-checked it and it was fine. So I replaced it with tnsnames.ora files from three other working clients. But it still gave the same error message.
Next, I replaced the sqlnet.ora file from working clients, but it still wouldn't work.
Next I added a TNS_ADMIN environment variable pointing to the <orahome>\network\admin\ directory, but still no go.
Next added an ORACLE_HOME environment variable, but no success.
I had another pair of eyes look at this, and they couldn't find anything wrong.
All the clients are on the same network, the database is up and running, and the other clients can connect without a problem. The client that is not working can ping the server where the 8i database resides.
Help! What am I overlooking? Something in the registry? Can this error message appear for something wrong in the database even though the other 3 clients can connect?Mark,
I don't think there's something wrong with your database.
This seems more of a communication error between the client and the database, are the other clients the same version?
From what I know 10g clients are not compatible with 8i databases.
It's an SID issue I think, can';t remember now.
will lookup and feed back.
regards,
Tony
PS: Try creating the LOCAL entry in the registry and use the SID you are trying to connect, MIGHT help
Message was edited by:
Tony Garabedian -
Problem with TSNNAMES.ORA
Hi all,
I have a problem with tsnnames.ora file. After i installed obiee and when i careated dsn and when i test it the connection is failed. My OS is windows vista and i cant find the path for the TSNNAMES.ORA in my system. Any help is highly appreciated
Thank You AllHi User,
The best thing to do to ensure connectivity with Oracle databases is a tnsping command. If you can tnsping it, then OBIEE should be able to connect to it.
Here's how you do that:
1. Go to Start -> Run -> cmd
2. type in: tnsping <tns entry name> e.g: tnsping ORCL
3. View the response. The response will tell you if it connected successfully, and which tns file it used.
Good luck and let me know if this helps.
-Joe -
Troubles with TNSNAMES.ORA - with solution
Hi There
I've had the problems described and solved in other entries of the forum.
But then I ran in to a new one, the product would only read part of the file..!
I've found that the problem apparently is that if there is an entry with a host that is not available then the product stops reading the file.
I removed the entry and then it continued until the next unavailable server, which i then deleted. Finally I had a full TNS list in the product. But when the other servers becomes available again I have to add them to TNSNAMES.ORA, so I hope Oracle will fix it.
A part from that a fine product.
/regards Ole JørgensenThats strange, as we do not ping every host to make sure it is available. is this a 10.2 Oracle Home?
-
Connection to db works with ezconnect but fails with tnsnames.ora
Hi,
When I try to connect to remote datbase using 10g ezconnect, it works fine. But when I tried to connect to same database using tnsnames.ora, it fails:
sqlnet.ora on client side:
================
###SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH=(tnsnames, onames, hostname, ezconnect)
tnsnames.ora on client side
=================
MRAP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = moody)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = MRAP.ALBILAD.COM)
Listener On DB Server:
===============
$ lsnrctl status
LSNRCTL for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Production on 04-APR-2010 16:29:16
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=moody)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Production
Start Date 04-APR-2010 16:28:59
Uptime 0 days 0 hr. 0 min. 16 sec
Trace Level off
Security ON: Local OS Authentication
SNMP ON
Listener Parameter File /u01/app/oracle/product/10.2.0/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=moody)(PORT=1521)))
Services Summary...
Service "mrap.albilad.com" has 1 instance(s).
Instance "mrap", status READY, has 1 handler(s) for this service...
Service "mrapXDB.albilad.com" has 1 instance(s).
Instance "mrap", status READY, has 1 handler(s) for this service...
Service "mrap_XPT.albilad.com" has 1 instance(s).
Instance "mrap", status READY, has 1 handler(s) for this service...
The command completed successfully
Now, on client, when I connect with each of methods written above, following is output:
C:\Documents and Settings\c900796>sqlplus ingrian/[email protected]:1521/mrap.albilad.com
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Apr 4 16:57:18 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> show user;
USER is "INGRIAN"
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64
bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
C:\Documents and Settings\c900796>sqlplus ingrian/ingrian@mrap
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Apr 4 16:57:25 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
Enter user-name:
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
ERROR:
ORA-12560: TNS:protocol adapter error
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
C:\Documents and Settings\c900796>
What do you suspect could be the issue?
Br,
AnjumC:\Documents and Settings\c900796>sqlplus ingrian/ingrian@mrap
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Apr 4 16:57:25 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specifiedstates, in no uncertain terms, that the system can not find the @mrap in the TNS translation methods. Usually that indicates a problem in finding the correct entry in the correct tnsnames.ora file. Some related thoughts:
1) The LIST of methods allowed is found in SQLNET.ORA on the client. If multiple methods are in the list, the client will step through the methods.
It is possible that you do not have method calling the TNSNAMES.ORA file in the list. (You appear to have that.)
2) The mrap must be one of the entries on the left hand side of te equals sign of a stanza.
MRAP = (DESCRIPTION (appears to provide that)
3) The SQLNET.ORA could provide a 'default domain' to append on the end of the lookup value in TNSNAMES.ORA
Not sure whether your post of the sqlnet.ora selectred only a few lines or the entire file.
4) Variable issues can exist.
- The TNS_ADMIN variable may be used to force the use of a specific directory instead of %ORACLE_HOME%\network\admin .
- ORACLE_HOME can be adjusted by a variety of methods, and may be in both teh registry and the system environment -
Problem with ODS activation -- Urgent
Hi All,
I have a problem with ODS activations, when I trying to activate ODS data automatically/ Manually. It is going to short dump.
Could you anybody pls help me in this issue.
Thanks in Advance
NarendraSorry for delay,
I raised an OSS messsage and waiting from reply.
The ODS fetch the data from 6 sources. all the 5 sources data is correctly updating in the ODS. I have ODS activation problem with only one soure data.
The error is
RSMO
Inserted records 1-; Changed records 1-; Deleted records 1-
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 incorrect with status 4 in rsodsacstreq
No confirmation for request ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 when activating the ODS object ZPMPRCST
Activation of data records from ODS object ZPMPRCST terminated
SM37 Job log
Error Message from Job log (SM37) (Highlights of the Job log)
SIDs determined successfully for request REQU_49Y4VOQEDO6H73KDE354JNDB5 from ODS object ZPMPRCST
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
No confirmation for request ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 when activating the ODS object ZPMPRCST
SID assignment started at 07:41:12
SID assignment finished at 07:42:22
Activation started at 07:42:22
Activation finished at 08:12:28
Errors occured when carrying out activation
Analyze errors and reactivate if necessary
Activation of data records from ODS object ZPMPRCST terminated
Activation is running: Data target ZPMPRCST, from 1.397.204 to 1.397.204
Data to be activated successfully checked against archiving objects
SIDs determined successfully for request REQU_49Y4VOQEDO6H73KDE354JNDB5 from ODS object ZPMPRCST
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 not correct
No confirmation for request ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 when activating the ODS object ZPMPRCST
SID assignment started at 07:41:12
SID assignment finished at 07:42:22
Activation started at 07:42:22
Activation finished at 08:12:28
Errors occured when carrying out activation
Analyze errors and reactivate if necessary
Activation of data records from ODS object ZPMPRCST terminated
Activation is running: Data target ZPMPRCST, from 1.397.204 to 1.397.204
Data to be activated successfully checked against archiving objects
SIDs determined successfully for request REQU_49Y4VOQEDO6H73KDE354JNDB5 from ODS object ZPMPRCST
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 incorrect with status 4 in rsodsacstreq
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000002 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000003 not correct
Request REQU_49Y4VOQEDO6H73KDE354JNDB5, data package 000001 not correct
No confirmation for request ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 when activating the ODS object ZPMPRCST
SID assignment started at 07:41:12
SID assignment finished at 07:42:22
Activation started at 07:42:22
Activation finished at 08:12:28
Errors occured when carrying out activation
Analyze errors and reactivate if necessary
Activation of data records from ODS object ZPMPRCST terminated
Report RSODSACT1 ended with errors
Job cancelled after system exception ERROR_MESSAGE
RSODSACTREQ Table Entries
Table: RSODSACTREQ
Displayed Fields: 10 of 10 Fixed Columns: 3 List Width 1000
InfoCube Request ID Data packet number Boolean Boolean Request ID ODS operation Activ. status
ZPMPRCST REQU_49Y4VOQEDO6H73KDE354JNDB5 000000 X X ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 A 0
ZPMPRCST REQU_49Y4VOQEDO6H73KDE354JNDB5 000001 X ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 A 4
ZPMPRCST REQU_49Y4VOQEDO6H73KDE354JNDB5 000002 X ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 A 4
ZPMPRCST REQU_49Y4VOQEDO6H73KDE354JNDB5 000003 X ODSR_49Y5D1HMEA9OOGJD9VS1XTXY9 A 4 -
Problem with delta load urgent!!
Hi,
I have a problem with delta load
We have an IP, which loads data from R/3 system daily, its a delta load to the ODS and it updates to the cube with the selection on Company Codes and 0FISCPER
we are in 3.5 system
For a couple of company codes A & B, the init was done for the period 07.2010 to 12.2099 and after tht the deltas are loaded from 07.2010 till 12.2099 and there's no pblm with tht
Now, there was some updation in R/3 system and the data was maintained for the company codes in A& B for the FISCPER 001.2010 to 006.2010, for which init wasnt maintained...
now how shall we need to load the init in this case? dnt ask me how the postings was done in R/3, but my pblm is purely related to the loading data in BW from R/3, as its very imp for the customer to see the data from 01.2010 to 12.2010 in reports, but the data was only available in reports from 07.2010 onwards
do i need to create another IP and maintain the init for 01.2010 to 06.2010? so tht this selection will automatically appear in the ODS delta loading infopackage
pls throw ur inputs ASAP
thank youHi Prince,
No need to maintain any Init for this data, It will be enough if you can load the data from jan 2010 to jun 2010 into your Info Cube.
Follow the below steps:
1)create full load IP for this data source.
2) give the selection as A and B company codes and 0FISCPER as 001.2010 to 006.2010
3) in menu bar, click on scheduler --> select full repair request
4) In the next screen check the check box and save
5) Now execute the IP, it will the data with out disturbing your daily delta.
follow the same procedure to load data till to your Info Cube.
Please revert if you have any questions
Regards,
Venkatesh -
Problem with a Servlet - URGENT help
Hello
i really need your help. here i uploaded my web project: http://www.2shared.com/file/4450238/aaa4d9cd/JMSTest.html
it's about 2 servlets, one Test servlet sending a message, and another one, Receiver, to receive the message sent via JMS (i use ActiveMQ)
i didn't know what's wrong, if i call http://localhost:8080/JMSTest , then i enter something into that textfield, then i press the button(form action is http://localhost:8080/test ). it writes that "Mesaj trimis" (message sent - written by me in Romanian), and when i call http://localhost:8080/receiver i did not receive the message. Why?
I use queue, so i think the send message is stored in a queue until a receiver receives it.
Please download the project, isn't complicated.
I did not know what's the problem.
here is the server.xml file from Tomcat conf folder:
<?xml version="1.0" encoding="UTF-8"?>
<Server port="8005" shutdown="SHUTDOWN">
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"/>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"/>
<!-- Global JNDI resources
Documentation at /docs/jndi-resources-howto.html
-->
<GlobalNamingResources>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users
-->
<Resource auth="Container" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" name="UserDatabase" pathname="conf/tomcat-users.xml" type="org.apache.catalina.UserDatabase"/>
</GlobalNamingResources>
<Service name="Catalina">
<Connector connectionTimeout="20000" port="8080" protocol="HTTP/1.1" redirectPort="8443"/>
<Connector port="8009" protocol="AJP/1.3" redirectPort="8443"/>
<Engine defaultHost="localhost" name="Catalina">
<Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host appBase="webapps" autoDeploy="true" name="localhost" unpackWARs="true" xmlNamespaceAware="false" xmlValidation="false">
<!-- SingleSignOn valve, share authentication between web applications
Documentation at: /docs/config/valve.html -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->
<!-- Access log processes all example.
Documentation at: /docs/config/valve.html -->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs"
prefix="localhost_access_log." suffix=".txt" pattern="common" resolveHosts="false"/>
-->
<Context path="/JMSTest" docBase="JMSTest"
debug="5" reloadable="true" crossContext="true">
<Resource name="jms/ConnectionFactory" auth="Container"
type="org.apache.activemq.ActiveMQConnectionFactory"
description="JMS Connection Factory"
factory="org.apache.activemq.jndi.JNDIReferenceFactory"
brokerURL="vm://localhost"
brokerName="LocalActiveMQBroker"
userName="activemq" password="activemq"
useEmbeddedBroker="false"
clientID="TomcatClientID" />
<Resource name="jms/myQueue" auth="Container"
type="org.apache.activemq.command.ActiveMQQueue"
description="JMS Queue"
factory="org.apache.activemq.jndi.JNDIReferenceFactory"
physicalName="TEST.FOO" />
<Resource name="jms/myTopic" auth="Container"
type="org.apache.activemq.command.ActiveMQTopic"
description="JMS Topic"
factory="org.apache.activemq.jndi.JNDIReferenceFactory"
physicalName="TEST.BAR"/>
</Context>
</Host>
</Engine>
</Service>
</Server>or, how should i do this, but using Sun Message Queue? my way is using Apache MQ
Thanks
Edited by: Talkabout on Dec 13, 2008 7:15 AMI didn't go all through your code, but I'd say you should make sure that the Receiver servlet is up and running BEFORE your access the Sender servlet.
-
Problem with error ORA-06502: PL/SQL: numeric or value error string
Hi,
I am running a loop to just spool output data using 'dbms_output.put_line' and I keep getting this error after a few records. I resorted it and it happen at a different interval. Could it have to do with the length of the item I am trying to spool? Thanks.
ORA-06502: PL/SQL: numeric or value error stringSD wrote:
Hi,
I am running a loop to just spool output data using 'dbms_output.put_line' and I keep getting this error after a few records. I resorted it and it happen at a different interval. Could it have to do with the length of the item I am trying to spool? Thanks.
ORA-06502: PL/SQL: numeric or value error stringyes, it is a data dependent error.
Handle: SD
Status Level: Newbie
Registered: Nov 21, 2001
Total Posts: 289
Total Questions: 189 (183 unresolved)
why do you waste time here when you rarely get your questions answered? -
I-Procurement problems with approval hierarchy - Urgent!! Please help!
Dear experts,
I am having a number of problems in i-procurement (12.1.3). When creating a Requisitions in i-procurement on the screen when it arrives with the approval list, it has retrieved a personel who is not in the hierarchy list at all. (not using AME just employee hierarchy)
I have checked the usual setting such as making sure the document type settings is correct and the position hierarchy for the position raising the requisition.
In addition to this once proceeding with submitting the requisition the created time is completly wrong. It is displaying a date occuring in the past. And in the Justification field it has already been populated it appears that it has captured information from a previous requisition. Furthermore in the created by field it also displaying a name of a different user to the one I am currently using.
I am out of ideas as to exactly what the problems is. Would appreciate if any I-procurement gurus can take a look at my issue.
Thanks and Regards
EbsnoobThat sounds like a feedback loop.
Does the tone alter in pitch when you alter input and/or output levels or move your microphone?
And have you checked your coreaudio device in *Logic Pro>Preferences>Audio* ? And your recording settings in *File>Project Settings* ?
And how is your monitoring setup? Directly from the Presonus, or do you use *Software Monitoring* ?
Does the tone stop when you hit Pause ?
2nd possibility: a note event somewhere triggers a synth - but that would also happen in playback, so it is a long shot.... it does not happen in playback?
regards, Querik.
ps: the advantage of smashing up things is that then you are at least sure you can't fix it anymore. Better keep some broken stuff handy, because you'll regret smashing up working stuff. -
Problem with MTO scenario-urgent
hi everyone,
our client is using MTO process, where they will exchange halb materials for the fert level production order. i.e according to MTO sales order will trigger procurement seperately at all levels of bom( as sales order stock). what is happening at the client side is they are converting plnd orders to production orders generated in the stock requirement list for HALBS, as thier wish they want to use these randomly for fert production,
costs differences are arising.....
so kindly suggest a solution
thanks
madhuHi Madhu,
Your requirement is simple. If my understanding is right in your scenario you have a FERT (A) which is MTO and the assemblies/components (B) used for manufacturing it is a stock item or MTS.
For component A you have to define in material master MRP view 3 with planning strategy - 20 and in MRP4 maintain "1" for Individual and Collective requirement indicator.
For component B you have to define in material master MRP view 3 with a suitable planning strategy -(Not= 20) and in MRP4 maintain "2" for Individual and Collective requirement indicator.
This would resolve the problem. Reward your points,
thank you,
Regards,
Prasobh -
Hi all,
I'm using oracle 6i and in my program I use an activeX for generating barcodes..
the activeX genrate an image file and i need to store it in db(oracle 9i) or at least show the generated image through my form...the problem I encounter is that the read_image_file built in does not read the barcode images while it reads and shows other pictures with the same type (ex. tif or jpg)...
here is my code (in case if it is useful) :
declare
application ole2.obj_type;
begin
application := ole2.create_obj('IDAuto.BarCode.1');
----DataToEncode :this is the data that is to be encoded in the barcode
ole2.set_property(application,'DataToEncode',:txt);
IDAuto_IBarCode.SetPixelsXY(application,2048,1024);
----this method save the image file
IDAuto_IBarCode.SaveEnhWMF(application,'d:\TEST.tif');
:system.message_level := '25';
Read_Image_File(,'d:\TEST.tif','TIFF', 'control.itm_image');
:system.message_level := '0';
end;The errors are here:
byte buff[]=new byte[(int)file.length()];
InputStream fileIn=new FileInputStream(aa);
int i=fileIn.read(buff);
String conffile=new String(buff); (conffile is a String object containing the image)
and here:
String content ="-----------------------------7d11e410e500f2\r\n"+"Con
ent-Disposition: form-data;"+"name=\"upload\";
filename=\""+aa+"\"\r\n"+"Content-Type:
application/octet-strem\r\n\r\n\r\n"+conffile+"--------
--------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);conffie is sent to the server but
it's non possible to treat binary data as String!
Image files must be sent as byte[] NOT as String ...... -
Problem with VO Extension (Urgent.......)
Hi,
I extended one VO which is not based on any VO. Is it mandatory to add the new VO to the Application module which the old VO is referencing?
The problem is when I am wirting the where clause to the new VO, I am not getting any error but my VO has not filtered with my where clause.
I written the code in my CO as:
//for getting the VO reference
CopyLibraryTestVOImpl libVo=(CopyLibraryTestVOImpl)oaapplicationmodule.findViewObject("CopyLibraryTestVO");
//set the where clause
libVo.setWhereClause("ATTRIBUTE2 = :1");
libVo.setWhereClause("ATTRIBUTE4 = :2");
libVo.setWhereClause("ATTRIBUTE6 = :3");
libVo.setWhereClauseParams(null);
libVo.setWhereClauseParam(0, len1);
libVo.setWhereClauseParam(1, len2);
libVo.setWhereClauseParam(2, len3);
libVo.executeQuery();
============================================
Can any one help me on this issue.
Thanks,
Satya.For substitution you need to follow a few steps which I am not sure whether you have done or not.
libVO might be coming as null because you haven't added it to any AM.
--Shiv -
Problem with the n73-urgent!!
I cannot make/receive any phone calls, 'cause the person on the other side of the line doesn't hear anything I say. I'm sure its not a big problem, but I can't find the solution. Can anyone help? Its pretty urgent! Thanks!
It's either a software fault or hardware failure.
Backup everthing you want to keep then download and install the nokia software updater:
http://www.nokia.co.uk/A4226014
If this doesn't fix it then you will need to visit a nokia care point.
Care points:
UK
http://www.nokia.co.uk/A4228006
Europe:
http://europe.nokia.com/A4388379
Elsewhere:
http://www.nokia.com and select your country.
Maybe you are looking for
-
I'm Using Lookout 6.02, in a XP Pro Windows Machine, Service Pack 3. I have an application that collects data at the rate of 20 samples per second. It works just fine, the CSV File contains all the samples without missing a single one. The problem is
-
[SOLVED] HDMI audio not working (worked in Ubuntu)
hi there, I have very new hardware (Intel Core i5 2500, using the internal GPU) and already knew that it would probably take me a while to get everything working (especially the GPU). I first tried Ubuntu 11.04 Alpha with the xorg-edgers ppa, which a
-
How many CD/DVD in the box?
I have recently purchased iMac G5 1.9GHz. I want to make sure I received everything that Apple packed in the box. Can anybody tell me how many CD's/DVD's come in the box and what is on these discs. Thanks. Dual 2.5 GHz G5; 23 Cinema Disp; 667 Mz TiBo
-
How to display a description and make validations
Hello colleagues... As most of you I'm coming from a Forms background and I'm triying to understand some techniques. But my question is If have a simple PL/SQL block to display a descripction and make some validations, How can I do the same task usin
-
Problem while loading data from ODS to infoobject
Hi guys, I am facing problem while loading data from <b>ODS to infoobject</b>. If I load data via PSA it works fine but if I load data without PSA its giving error as Duplicate records. Do u have any idea why it is so. Thanks in advance savio